P
PrintablesRGB toaster
desoldering pump HSW holder
Holds a desoldering pump on the honeycomb storage wall.
- Pobrania
- 302
- Polubienia
- 65
- Ocena
- 5
Wyniki wyszukiwania: desolder
Liczymy pasujące modele…
P
Printableskrisennerd
IKEA Skadis - desoldering pump
Holder for desoldering pump.Fits on a IKEA Skadis Board. Based on the Fusion 360 peg models from Rkimmell73 https://www.thingiverse.com/thing:3734897 You can find the whole IKEA Skadis pegboard one my blog (article is in German):…
- Pobrania
- 474
- Polubienia
- 73
- Ocena
- 4,75
P
Printablesrabbit
Gridfinity Desoldering wick
A simple and fast print to store your desoldering wick in a Gridfinity bin. Just print it like any normal gridfinity item and have fun :)
- Pobrania
- 281
- Polubienia
- 35
- Ocena
- 5
P
Printablesswablab e.V.
HSW desoldering pump holder
Holds a standard desoldering pump on the honeycomb storage wall.
- Pobrania
- 257
- Polubienia
- 57
- Ocena
- 5
P
PrintablesNeOn
Skadis desoldering pump holder
Holds a standart desoldering pump on the IKEA Skadis board.
- Pobrania
- 196
- Polubienia
- 26
- Ocena
- 4,75
P
PrintablesICT Avatar
Solder stand with Tip Holder addition (Vacuum Desoldering Pump) UMTAH V3.0
Solder stand with Tip Holder addition (Vacuum Desoldering Pump) Solder stand with Tip Holder files https://www.thingiverse.com/thing:2947275 Plier addition https://www.thingiverse.com/thing:3114598 Print instructions Category: Electronics
- Pobrania
- 173
- Polubienia
- 29
- Ocena
- 4,67
P
PrintablesShabubu
Desoldering Pump Multiboard Mount
Simple way to hang your soldering iron tips. Feel free to tinker: https://www.tinkercad.com/things/8I6Y6nyvaFM-desoldering-pump-multiboard-mount Print instructions Printer Brand: Prusa Printer: I3 MK3S Rafts: No Supports: Yes Resolution:…
- Pobrania
- 158
- Polubienia
- 29
- Ocena
- 5
P
PrintablesHarryFu
Ikea Skadis Desoldering Wick Holder
I was looking for a way to mount my different sizes of desoldering wick to my IKEA Skadis pegboard, but did not find a fitting model. I therefore made one by myself. This holder is designed to fit different versions of the small desolder…
- Pobrania
- 106
- Polubienia
- 20
- Ocena
- 5
P
PrintablesChriswak
Hakko FR-300 Desoldering Gun Stand With Longer Handle Support
Stand for Hakko FR-300m desoldering gun designed to be used with the included heat shield. From thingiverse https://www.thingiverse.com/thing:3407762
- Pobrania
- 99
- Polubienia
- 15
- Ocena
- 0
P
Printablessacrelege
Keycap for desoldered G-Keys on Logitech G915
After desoldering the switches, print 5 of these, upside down print direction turned 90° so it matches the brushed aluminium. No support, 0.2mm, PETG (update: added 2 test switch cover stl's, since someone asked for it. difference is…
- Pobrania
- 96
- Polubienia
- 25
- Ocena
- 5
P
PrintablesMartin
Heater holder repair piece for ZD-552A from ZD-915 or ZD-917 desoldering station
I managed to damage my holder so this is a replacement piece.
- Pobrania
- 86
- Polubienia
- 9
- Ocena
- 0
P
PrintablesDokkie
Gridfinity bin for solder sucker/desoldering pump
Box for gridfinity system for my solder sucker/desoldering pump
- Pobrania
- 69
- Polubienia
- 5
- Ocena
- 3
P
Printablesmistic100
Ikea SKADIS holder for large desoldering pump(universal hook)
A holder designed for large desoldering pumps (mine is 28mm in diameter). You will need an universal hook from CSD_Salzburg collection : https://www.thingiverse.com/thing:2853257
- Pobrania
- 66
- Polubienia
- 9
- Ocena
- 5
P
PrintablesAlex Ardeleanu
Desoldering Pump Peg Board Holder
I designed this holder for my desoldering pump. Its handle has a diameter of 14.5mm. My peg board is from Topex. The pegs aren't perfect, so I used a drop of hot glue to secure it in place. Happy 3D printing!
- Pobrania
- 64
- Polubienia
- 8
- Ocena
- 0
P
PrintablesOleksii Zelivianskyi
IKEA Skadis desoldering pump holder
This is Pro'sKit 8PK-366N-G desoldering pump holder for IKEA Skadis. This item is inspired by IKEA SKADIS Collection by CSD_Salzburg, it uses the same hook system (I included the hook). Check out the collection of other IKEA Skadis…
- Pobrania
- 57
- Polubienia
- 9
- Ocena
- 5
P
PrintablesGigabeast
HSW Desoldering Pump Holder - MINIMALIST
Other designs I saw were going to use quite a lot of filament, when it's such a light item that I thought I could get away with just a base and a top ring. In fact I was going to use this model…
- Pobrania
- 57
- Polubienia
- 5
- Ocena
- 0
P
Printableswrooty
Gridfinity Desoldering Braid Holder
1x2 Gridfinity module for holding desoldering braid reels. Designed with a flat top for a cleaner look since other modules can't be stacked on top of this one. Print details: Printer Bambu Lab A1 0.6mm Nozzle Filament eSun ePLA-Lite ‘Cold…
- Pobrania
- 51
- Polubienia
- 7
- Ocena
- 0
P
PrintablesBrokenTooth Designs
Engineer SS-02 Desolder Pump Gridfinity
Storage for Engineer SS-02 desoldering pump along with spare tube. Print with: 2-3 parimeters 2-3 top/bottom layers 0,2mm layer hight 10-15% infill.
- Pobrania
- 36
- Polubienia
- 10
- Ocena
- 0
P
PrintablesApex23
Ikea Skadis Desoldering pump (21 mm diameter) holder with container
This design exists of 2 parts, the holder and a container to collect solder falling out the pump. See also my other designs for more ways to Organize your tools on the Skadis board.
- Pobrania
- 36
- Polubienia
- 4
- Ocena
- 0
P
Printablesaibohphobia
ZD-915 Desoldering Gun Station Repair Part
This is a complete redesign (as compred to a modification of original) of this part……
- Pobrania
- 35
- Polubienia
- 7
- Ocena
- 0
P
PrintablesMrZebulon
Desoldering Station ZD-915 Hose Clamp
Hose Clamp for Desoldering station ZD-915 Category: 3D Printing
- Pobrania
- 32
- Polubienia
- 3
- Ocena
- 0
P
Printables3D-Print-Bunker
Skadis Desoldering pump & solder
Englisch: I designed a holder for my desoldering pump and solder. The desoldering pump does not hold in the holder alone. Deutsch: Habe eine Halterung für meine Entlötpumpe und dem Lötzinn entworfen. Die Entlötpumpe hält in dem Halter…
- Pobrania
- 31
- Polubienia
- 2
- Ocena
- 0
P
PrintablesMake'n'Modify
Desoldering Pump Mod
This small Clip is part of a modification of a crappy desoldering pump. Here it the video: I printed this in ABS. It should not get to hot for PLA up there, but just in case ;) How I Designed This Category: Electronics
- Pobrania
- 31
- Polubienia
- 2
- Ocena
- 0
P
PrintablesSorenTheSwede
Desolder Pump Holder (Multipoint Rail)
A Multiboard holder for a desolder pump. This holder is taller than others I've seen, but has a Multirail slot on the back and a firmer hold of the body, so I designed this. Designed around a pump with a ~20 mm diameter body and a 7.2 mm…
- Pobrania
- 30
- Polubienia
- 3
- Ocena
- 0
P
PrintablesSorenTheSwede
Desolder Pump Holder (Lite Multipoint Rail)
A Multiboard holder for a desolder pump. This holder is taller than others I've seen, but I wanted a Lite Multirail slot on the back and a firmer hold of the body, so I designed this. Designed around a pump with a ~20 mm diameter body and…
- Pobrania
- 29
- Polubienia
- 4
- Ocena
- 0
P
PrintablesDmake
Kalih hot-swap socket desoldering rig
I created this model to simplify de-soldering Kalih hot-swappable sockets for MX-compatible keyboard switches. Idea being to place it under the PCB as if it was a switch, and then let gravity gently push the socket up from the PCB once…
- Pobrania
- 29
- Polubienia
- 4
- Ocena
- 0
P
PrintablesZoid
Hot Air desoldering adapter for Proxxon drill stand
It's not easy to use this hot air desoldering gun with one hand and pliers with other hand. I don't have enough space nor money for dedicated stands. So I build this simple holder as extension for my Proxxon drill stand.
- Pobrania
- 26
- Polubienia
- 4
- Ocena
- 0
P
Printablesmarkaabo
Ripley Solder Sucker/Desoldering Tool Tip (Normal & Inverse Tip)
3D Printable ripley solder sucker tips, a normal one identical to the original tip or an inverse tip. Sadly you will still need the original o-ring or one that is similar. The model comes in 2 types: Normal: 95% identical to the original.…
- Pobrania
- 26
- Polubienia
- 0
- Ocena
- 0
P
PrintablesTonky
Desoldering pump holder for skadis (universal hook)
A holder I made for the ikea skadis. It is for a common desoldering pump (20mm ⌀) and attaches to the skadis board using a universal hook.
- Pobrania
- 26
- Polubienia
- 1
- Ocena
- 0
P
PrintablesAbbey-Lubber
Small Bins for Hakko FR-301 Desoldering Tool Case
Two bins that fit inside the Hakko FR-301 Desoldering Tool Case. No covers, but they mostly seal against the lid of the case and they definitely keep your spare parts from bouncing all over the case. Print in your choice of high…
- Pobrania
- 25
- Polubienia
- 2
- Ocena
- 5
P
PrintablesTechSensor
Screw Mounted Desoldering Pump Holder For Ikea Skadis
This model holds a desoldering pump in place on the Ikea Skadis board. The mounting method used is with two M3 screws and nuts for easy installation. The M3 nuts are originally too small for the board holes so you'll have to print the…
- Pobrania
- 21
- Polubienia
- 4
- Ocena
- 0
P
PrintablesCansi
Plunger Lock Pace Desolder
This is a 3D-printed replacement for the Pace Plunger Lock (Part Number: 1500-0063-P1) . It is specifically designed for use with the Pace SX-90 desoldering hand-piece, ensuring a proper fit and restoring the functionality of your tool.…
- Pobrania
- 21
- Polubienia
- 1
- Ocena
- 5
P
Printablesdeffener
Desoldering pump piston replacement part
The loose plunger part with clearing rod broke, so I modeled a new one. Afraid of the new one breaking the same way (and to avoid internal supports) I tilted the model 45 degrees. Print in the orientation pictured (horizontal…
- Pobrania
- 20
- Polubienia
- 4
- Ocena
- 0
P
PrintablesJohn
Relay holder for ZD-915 desoldering gun upgrade
ZD-915 is a low cost desoldering gun from China. There are a number of sites online that suggest several upgrades/improvements such as this :…
- Pobrania
- 19
- Polubienia
- 0
- Ocena
- 0
P
Printableswerz 99
IKEA Skadis Desoldering Pump Holder
Holder for desoldering vacuum pump ERSA VAC 3 with approx. 22mm diameter. Uses the IKEA Skadis twist-clips from https://www.printables.com/model/256896-skadis-t-clip-system designed by Line Arc Line. - Thanks for that design!
- Pobrania
- 19
- Polubienia
- 2
- Ocena
- 0
P
PrintablesRjene
Vacuum cleaner desoldering upgrade
Extension for classic vacuum cleaner to use it like desoldering device. On the other end is just a hole, where you should instal a mount-piece from a desoldering spring gun. Its not the best model, but probably someone will download just…
- Pobrania
- 19
- Polubienia
- 8
- Ocena
- 0
P
Printablesanacron
Pace MBT 100 desoldering station tube clips
clips for holding the desoldering pump tube and electric wire together
- Pobrania
- 18
- Polubienia
- 5
- Ocena
- 0
P
Printablesjeroen van der linden
nozzle holder desoldering
Holder for all your different nozzles of a desoldering station. #update: Made the text a bit bigger and the holes a bit bigger for a nicer fit and better view of the text.
- Pobrania
- 18
- Polubienia
- 1
- Ocena
- 0
P
PrintablesMaciej Śliwinski
Gridfinity Desoldering Pump Container
hi, i designed this desoldering pump container for my gridfinity setup.
- Pobrania
- 17
- Polubienia
- 2
- Ocena
- 0
P
PrintablesPatziTazi
Gridfinity Entlöt Pumpe + Entlöt Litze(Desoldering Pump+desoldering braid)
Simple 1x2 Gridfinity Bin for soldering stuff the diameter is for the Pump is 21mm and the desoldering Braid can be up to 50mm wide Einfacher 1x2 Gridfinity Bin für Löt Zubehör der durchmesser der pumpe beträgt 21mm und die entlötlize…
- Pobrania
- 17
- Polubienia
- 0
- Ocena
- 5
P
PrintablesAdam
Gridfinity Desoldering Bulb Holder
This is a holder for a desoldering bulb - I think mine is from Radioshack. It works with Gridfinity - it is a 1x1x3 block. To see if your bulb will fit, the dimensions are: Bottom radius 21mm (bulb is about 20mm) Hole is 16mm deep, and…
- Pobrania
- 17
- Polubienia
- 2
- Ocena
- 0
P
PrintablesBeefdip
Vaccuum Desoldering Pump (WIP)
There are no assembly instructions yet. Here is what you need: Yellow Boi(hard to find now) Food saver or other vacuum pump that takes 6mm OD tubing {{3d Printed parts}} 6MM ID O-ring (1.5mm) (this is a #5 in freedom units) 9MM ID O-ring…
- Pobrania
- 16
- Polubienia
- 1
- Ocena
- 0
P
PrintablesLeonardoWL
WELLER CLIP S shape for DS80 DXV80 DSX80 DSX120 WXDP120 WXDV120 WP80IG WP120 Desoldering Iron Clip
Weller DSX 80 Desoldering Iron and other Tube and cable Clip
- Pobrania
- 16
- Polubienia
- 2
- Ocena
- 5
P
PrintablesHoneyBadger
Desoldering Pump Stand with solder waste bin
Better Version: https://www.printables.com/model/1016754-better-desoldering-pump-stand-with-solder-waste-bi The top part is designed for the ATTEN AT-E330A desoldering pump.
- Pobrania
- 16
- Polubienia
- 0
- Ocena
- 0
P
PrintablesLaplander
Diy Desoldering Gun.
Things needed: some wire, cottonwool, 5mm flexiple plastic hose and superglue. Use superglue to attach handle assembly to soldering iron. Cottonwool is used as filter in end cap. (see picture) Screws: M3x8 4pcs. M3x12 4pcs. M3 nuts 8pcs.…
- Pobrania
- 15
- Polubienia
- 1
- Ocena
- 0
P
PrintablesPaŠe
Desoldering tool holder
Organizer for automatic desoldering tool (https://www.aliexpress.com/i/1005003687849262.html) to wall - to be glued
- Pobrania
- 14
- Polubienia
- 4
- Ocena
- 0
P
PrintablesNendemenne
Modlified Insert for Pinecil Case for Desoldering wick
I modified a insert of the pinecil rugged case to fit desoldering wick.
- Pobrania
- 14
- Polubienia
- 0
- Ocena
- 0
P
PrintablesHoneyBadger
Better Desoldering Pump Stand with solder waste bin
The top part is designed for the ATTEN AT-E330A desoldering pump.
- Pobrania
- 13
- Polubienia
- 0
- Ocena
- 0
P
Printablesgenuineparts
SKADIS Desoldering Pump Holder
I took the Soldering holder by PaŠe and added Skadis hooks to it, print with supports for the hooks.
- Pobrania
- 13
- Polubienia
- 5
- Ocena
- 0
P
PrintablesJoseph Chiu
Gridfinity 1x5 tray for large desoldering pump ("NL813", "Big Desoldering Pump", "Solder Puller", similar to "Soldapullt").
This is a 1x5 Gridfinity nest for a bigger-than-average desoldering pump (IYKYK)... It's usually blue and yellow. The plunger hangs off the edge of the tray, which allows this tray to be printed on most printers. Otherwise, the tray would…
- Pobrania
- 13
- Polubienia
- 3
- Ocena
- 0
P
Printablesarminth
Switchcover Pro's Kit SS-331 Desoldering Station
If you own the SS-331, the first thing you will do is move the powerswitch from the back to the front! This leaves an ugly and dangerous hole in the backcover. With this simple part, you can close the hole. It is a press fit so should be…
- Pobrania
- 13
- Polubienia
- 1
- Ocena
- 0
P
PrintablesHumbleDeer
Pro's Kit desoldering pump spring ring
This ring replaces a broken spring retainer inside a Pro's Kit DP-366D desoldering pump. Probably fits clones too of this model too. They are quite ubiquitous. Print slowly and hot for best results. PETG is useful, but not required.
- Pobrania
- 13
- Polubienia
- 1
- Ocena
- 0
P
PrintablesString0Fellow
Hakko Desoldering Tool Spacer (FM-2024)
After emptying the filter pipe assembly a few times, the cardboard edges are usually a bit weaker and don't make a good seal with the front and back holder bushings. This spacer goes behind the spring-loaded back holder to apply a bit…
- Pobrania
- 13
- Polubienia
- 2
- Ocena
- 0
P
PrintablesRamón
Desoldering Pump Button Replacement
This is a replacement for the infamous and fragile button on the desoldering pump for electronics. Add a 20mm M3 screw to make this button permanently fixed.
- Pobrania
- 12
- Polubienia
- 6
- Ocena
- 0
P
PrintablesMikWantec
Tip Holder For Soldering and Desoldering Station Solomon SL-916D
Holder of 11 tips for the Solomon SL-916D soldering and desoldering station. I printed it from PETG with standard settings. No supports needed. Soldering tip hole diameter: 6mm Desoldering tip hole diameter: 7.5mm Object size: 120 x 40 x…
- Pobrania
- 12
- Polubienia
- 1
- Ocena
- 0
P
PrintablesFlaviano Nzambi
Grindfinity Desolder Pump with accesories
Made a 4x1 Desolder Pump holder with a holder for rosin flux and desolder wick Made the step and fusion file available if u want to change the diameters and such in the timeline Print like any other gridfinity file i made it in 0.3mm as i…
- Pobrania
- 11
- Polubienia
- 2
- Ocena
- 0
P
PrintablesSkowerR
Cheap desoldering iron pistol grip
Recently I have picked up a cheap desoldering iron and to make it a little more ergonomic I made a handle/pistol grip for it. Category: Tools
- Pobrania
- 11
- Polubienia
- 0
- Ocena
- 0
P
PrintablesTom Hoeppner
Desoldering tool stand with magnetic base
The idea for this came as an "add-on" to my revised magnetic solder spool holder . The cup holds a manual pump vacumm desoldering tool at a convenient 45 deg angle. The base has pockets for 10x2mm magnets. It attaches nicely to a swing…
- Pobrania
- 10
- Polubienia
- 0
- Ocena
- 0
P
PrintablesSmithChart
Gridfinity Ersa VAC X desolder tool stand
This is a simple stand for an Ersa VAC X desolder tool. It fits on a 1x1 Gridfinity baseplate. FreeCAD file provided for those playing along at home.
- Pobrania
- 9
- Polubienia
- 1
- Ocena
- 0
P
PrintablesDr. Stefan Lux
Gridfinity - Inlay for my desoldering pump
Created by subtracting the pump's outline from a solid GF block
- Pobrania
- 9
- Polubienia
- 0
- Ocena
- 0
P
PrintablesSimonvg
Toolcraft desoldering gun cable clips
These clips are designed to be used with the Toolcraft ZD-8925 Desoldering gun, to keep the cable and vacuum hose together. They will probably work for other brands too, if they use the same cable/hose sizes. The cable of the Toolcraft…
- Pobrania
- 8
- Polubienia
- 2
- Ocena
- 0
P
Printablestony
Desoldertool Spares Box
I have just bought a de-soldering tool and like a lot of things now, it comes with little spares like nozzles, filters and cleaning rods. These usually get put somewhere for safe keeping and I never remember where I put them so I thought…
- Pobrania
- 8
- Polubienia
- 1
- Ocena
- 0
P
Printablesmichaljef
Solder Spool (100g) Holder with Flux, Tweezers, Desolder wire & Smaller spool holder
Holds 100g solder spool ( ø ⁓70mm | ⇿ ⁓25mm); Flux ( ø ⁓19mm); Tweezers (ESD-13); Desolder/Smaller spool (3×) Side Holders needs to be glued, they won't hold by themself. There are few overhangs for side holders, but their dimensions are…
- Pobrania
- 7
- Polubienia
- 0
- Ocena
- 0
P
Printableswolfi359
Pace MBT 250 Desoldering Grip for Cartridge Lock
Print with PETG for sturdyness and temperature resilience.
- Pobrania
- 6
- Polubienia
- 1
- Ocena
- 0
P
Printableswhilex
Skadis desoldering pump holder - remix Screwable
desoldering pump holder , another screwanle remix version of a great model, if you prefer a (wooden) wall.
- Pobrania
- 6
- Polubienia
- 3
- Ocena
- 0
P
PrintablesMaster Yoda
Wall-Mounted Desoldering Pump Holder
This is a functional wall mount designed to keep your manual desoldering pump organized and within reach. It features a bottom support to hold the weight and a "C-clip" style upper bracket to snap the tool securely into place. The design…
- Pobrania
- 5
- Polubienia
- 1
- Ocena
- 0
P
PrintablesBergen Fellesverksted
Skådis Desoldering Pump Holder
A quickly made holder for a desoldering pump for the IKEA Skådis system. Print instructions: Prints with the tip end down, and then with organic supports at the pegs. PETG 0.2 mm layer height 3 perimeters 10% infill
- Pobrania
- 5
- Polubienia
- 2
- Ocena
- 0
P
Printablesbluesyann
Desoldering pump and spool holder
This was my first model designed in OpenSCAD. It’s very simple, but it does the job nicely! The project includes three parts: Spool holder Spool shaft Desoldering pump holder The model is fully parametric , so you can easily adapt the…
- Pobrania
- 5
- Polubienia
- 0
- Ocena
- 0
P
PrintablesMikeF
Hakko 808 desoldering gun stand
This is a stand for the Hakko 808 desoldering gun. The base and support are separate in case you want to disassemble for storage or they can be glued together.
- Pobrania
- 5
- Polubienia
- 1
- Ocena
- 0
P
PrintablesNDakota
Grindfinity holder for ProsKit desoldering pump
The grindfinity holder for the ProSkit desoldering pump fits perfectly and can be easily removed. There is a cutout on the back for easy removal.
- Pobrania
- 4
- Polubienia
- 0
- Ocena
- 0
P
PrintablesSam Lloyd
Jbc Desoldering Tip Holder
A simple holder for the tips for my Jbc De soldering tool as i couldn't find one anywhere i can also upload the fusion 360 file should anyone need it i printed mine in petg but it should work in any material
- Pobrania
- 4
- Polubienia
- 0
- Ocena
- 0
P
PrintablesRedherring32
Parametric DIP Desoldering Tip
Parametric design for desoldering iron tips to easily and safely (For the chip and PCB) desolder DIP packaged chips Designed to fit these tips: https://cnckitchen.store/collections/soldering-tips-and-sets However you can tweak the…
- Pobrania
- 3
- Polubienia
- 1
- Ocena
- 0
P
PrintablesCollin Rottinghaus
Hakko 633 Syringe Holster (Flux/Desolder Pump)
Snaps into side panel. Holster fits for ~19mm body syringes Works with all of my flux syringes and desoldering pumps Please ignore my broken camera sensor
- Pobrania
- 2
- Polubienia
- 2
- Ocena
- 0
P
PrintablesMarceTD
Finger buttom for desoldering tool
Printed in PLA with a layer height of 0.20 mm—it worked perfectly. Designed from scratch. Any recommendations are welcome.
- Pobrania
- 1
- Polubienia
- 0
- Ocena
- 0
P
Printablestbr
Desoldering pump gridfinity stand
Designed to fit the chinesium knock off desoldering pump / solder sucker that pretends to be an Engineer brand SS-03. Stored standing up to save space. Includes small spaces to store spare silicone tube, if so desired. Also space for…
- Pobrania
- 1
- Polubienia
- 1
- Ocena
- 0
P
PrintablesArturous144
Desoldering pump / Solder sucker Mount
Holder for Desoldering pump / solder sucker that mounts to the skirt of my workbench.
- Pobrania
- 0
- Polubienia
- 0
- Ocena
- 0
P
Printables
Wall-Mounted Desoldering Pump Holder
This is a functional wall mount designed to keep your manual desoldering pump organized and within reach. It features a bottom support to hold the weight and a "C-clip" style upper bracket to snap the tool securely into place. The design…
P
Printables
Skådis Desoldering Pump Holder
A quickly made holder for a desoldering pump for the IKEA Skådis system. Print instructions: Prints with the tip end down, and then with organic supports at the pegs. PETG 0.2 mm layer height 3 perimeters 10% infill
P
Printables
Grindfinity holder for ProsKit desoldering pump
The grindfinity holder for the ProSkit desoldering pump fits perfectly and can be easily removed. There is a cutout on the back for easy removal.
P
Printables
Jbc Desoldering Tip Holder
A simple holder for the tips for my Jbc De soldering tool as i couldn't find one anywhere i can also upload the fusion 360 file should anyone need it i printed mine in petg but it should work in any material
P
Printables
WELLER CLIP S shape for DS80 DXV80 DSX80 DSX120 WXDP120 WXDV120 WP80IG WP120 Desoldering Iron Clip
Weller DSX 80 Desoldering Iron and other Tube and cable Clip