Counting matching models…
This is a combination tool to help disconnect the PTFE tube and the AMS cable. I had seen some small separate versions, I wanted to make a combined tool that I can hang from my wire shelving unit. There are also holes to hang from a peg.…
Build Tray is a modular organization system designed for makers, tinkerers, technicians, repair enthusiasts and anyone who needs to keep small parts under control while working on a project. It was created to help organize components…
This modernly designed tea organizer and tea dispenser keeps your favorite types of tea organized and safe. The standard dimensions are 210mm x 85mm x 170mm. The tea dispenser is designed for all common tea packs. About the print…
Following a discussion I had with @ThatMakerKid, I wanted to create my own set of 3d printed spudger tools inspired by the iFixit spudger designs but with a geometry better suited for FDM printing. I decided to create 3 models to achieve…
My 8-shot re-mix of Uhltimate's Disc Shooter, was fun, but why shoot 8 discs when you can shoot 40. Really fast. This double-barrel version of the shooter is crank driven, able to fire up to 8 discs per second. It uses the same basic…
9 ¾ train platform sign I designed from Harry Potter Studios / Hogwarts Express Few ways it can be mounted: - Mounted to a wall etc with screws - Can be used with Ikea Skadis - Can embed magnets see the remix to embed magnets . Make a…
And another air disc so that the vacuum bag can be pumped empty more quickly.
Printable Baskets for IKEA SKADIS. Have to be glued after print. I recommend cutting off the lowest 0.5mm for support-free prints. Created by fixing the issues of this: https://www.thingiverse.com/thing:2796627
Rapid fire fun with this Gatling-style disc shooter. Shoot up to 5 discs per second, with a magazine capacity of 32 discs. Shoots up to 8 meters (or more?). Easy to print and assemble. Requires a rubber band to drive the firing pin. (Size…
The IKEA SKÅDIS pegboard is very useful to organise my 3D printing related stuff, such as filament spools , benchies in different colours and a variety of tools. Here on Printables you can find all kinds of great custom SKÅDIS compatible…
This custom-designed 3D model is a practical solution for organizing USB cables on the IKEA Skådis pegboard series. It allows you to securely attach USB cables to the Skådis system for quick and easy access. The cables can be effortlessly…
Added a pegboard hook to the model, fitting of the IKEA SKÅDIS pegboard Original: Stackable cable clips by mkuiper | Download free STL model | Printables.com
This is a printable car disassembly tool set of 5 tools.
To change you need to use Solidworks 2022 or later
PS5 DualSense controller holder for Ikea Skadis panel. More vertical variant of @zenzmatz_213590 holder
Small tray for sorting things e.g. screws. No special print requirements. Recommended infill ≥ 10% Added a second version with chamfers instead of rounded corners. Should work without support.
Designed for Cube Stereo Hybrid frame but probably suit most most frame. Attached with double-sided tape. Note! Make sure that the cables are long enough to turn the handlebar. Recommend to print with supports. I prefer the “closed”…
Simple and easy P1P/S Panda Touch Display Holder. This piece easily slides onto the original display, allowing the Panda Touch to sit next to it. Featuring two attachment points, it conveniently secures the USB cable, providing a neat…
This print can be used to display award medals on a wall. It consists of two modular parts, a frame and a plate. There are two versions of each. The frame has both a simple version and a version with mounting slots to simplify attaching…
No change to the original model instructions.
Tool to support creating woven bracelets - the art called kumihimo. It is an easy print - use the pre-colored .3mf file with your Prusa slicer and print this disk for your bead weaving needs. There are 32 slots around the outside of the…
V2 version adds possibility to mount two additional PowerCon outputs instead of third SchuKo-socket with adapter plate. *********************************************************************************************** Was in need of a…
This is a remix of AA and AAA battery dispenser to be used on your multiboard organizer wall Category: 3D Printing
Simple and compact case to protect your display
Mickey, Minnie, Goofy and Donald cookie cutters
Developed by parents for parents! The MagicTokens are a kid's Disney Parks reward system. Let your little ones "earn" tokens while waiting for your big day (or days). In the parks, let your child "spend" 1 token for 1 treat. All within…
Designed to fit the o.b extra protect, but also will fit the “small/normal” ones Can be mounted on the wall with double-sided tape should fit up to 10 tampons
This is a Basic Display Shelf/Stand for your Cars in the Scale 1/64 (Hot Wheels, Matchbox, Majorette …. With it, you can display your coolest cars. For you I also made a single version if you want fewer or more subjects. You can put the…
Simple hook remix to fit the Dummy 13 accessory pin. Allows for a good spot to store/display all your dummy13 color/combinations.
This is a simple stand that I designed to display small crochet projects (like the pickle in the photos). The assembly consists of two of the Half_Crochet_Spear parts, superglued together then press-fit into the Crochet_Base piece (total…
three sizes of ant feeding dishes :3 useful for not getting outworld dirty print at 0.12 layer height or lower to prevent nasty gunk from getting into all the layer lines
Printing Parameters: Resolution: 0.2 mm Perimeters: 3 No supports needed Only cut off the four struts Related Models: Skadis Storage Box Skadis Spray Can Holder Skadis Basic Hooks Skadis Grinder Holder
Distributeur de piles / accus / batteries. Prévu pour être posé, il est stable grâce à son pied arrière. S'imprime en une seule pièce, sans support. Fichier paramétrique f3d (Autodesk Fusion) pour modifier les dimensions des batteries, le…
printed with creality fast PLA 0,2mm Layer hight on a modified Ender 5S1.
Wanted to plant a small plot of field corn. Had an EarthWay Seeder, but the corn disk was only for sweet corn and not for field corn. Created this disk based on the newer style of sweet corn disk. Only have 4 holes per rotation which…
A combination of myang777's VESA mount for the IKEA Skådis pegboard and heavily modified VESA 75/100 adapter by scrottconnerly. I needed an offset for the display so this allows the display to be mounted some centimeters over the edge of…
Tradis Parking Only. Now you can designate a parking spot for the Tardis along with a warning to all who take your parking spot. This is modeled in layers so you can do color changes. Please consider buying me a coffee
LUBA 2 mini AWD 800 replacement cutting disk It could fit other LUBA's and YUKA's. Please let me know if it does in the comments and share a pic :) I recommend that you print with something more durable than PLA. It could be ABS, PETG or…
Not for eating, unless you use a food-safe coating. Intended as a decorative way to store nicknacks
A parametric solder/wire dispenser. Module spool_roll generates the roller spools and module holder generates the holder base. Relies on five (5) variables, modified in OpenSCAD file. no_spools Total Number Of Spools spool_width Spool…
Cardholder for toploader or multiple sizes of tradingcards, slightly angled, for diffrent layer heights,no massiv infill
Parametric spool alignment disk for the Filament Spool Switcher & Winder for Bambu Lab AMS
This is the little brother of the Bevel Gears Display project. It consists only of 3D printed parts and is easy to assemble. I printed all the parts in PLA. The gear shafts are 6mm diameter by design but typically print slightly less. You…
Easy to print, just tape it wherever u want. Tape another close to it if u need more room. I design it so the juction should be almost invisible. edit : Add a Jumbo version
This model allows you to print your own discs for your disc-bound notebooks. You can use it to replace lost rings, restock your disc supply, personalize your journal with your favorite colors, or even create entirely new notebooks. The…
Automatic sticker dispenser for rolls by 65x29mm. Carrier strip feeds down the front and back under for easy application. The two parts are mounted by two M3 sink head screws.
Printed in PETG but PLA is fine also I assume.
Do you like this design and want to give a Tip for it? Do it here This is a Wall Mount for the GrindDozer Espresso Funnel / Distributor, that you can find on thingiverse too . I would advise you to use (opt. food-save) PETG, since it's…
Optimized for printing with a groove on the printing sheet.
AA & AAA Battery Dispenser for Multiboard A simple dispenser for AA and AAA batteries that clips onto the Multiboard. Drop batteries in from the top, pull the next one out from the bottom (to the side). FIFO. Can hold 12 AA and 13 AAA…
Dispenser box dimensions: (mm) 42 x 31 x 11
My take on a pinecil holder for the Skadis pegboard from IKEA. This holder features both a tidy storage option for when the soldering iron is cold and a heat-resistant holder with a 608 bearing for when it's hot. It also features two…
Used simple corkboard and some bowls to trace mouse ears and cut with a razor blade. The bowls I used were 20cm (for the ears) and 29cm (for the face) This is a simple print to fit on a 256x256 plate, and glue together to provide a nice…
Printed with low quality ultimaker cura settings for sovol sv-06
This is a parametric Fusio360 file for the great design of Olo Deepdelver: Parametric Bottle Holders - IKEA SKADIS - SIDE version I've rebuilt the model from scratch but tried to stick to the original as close as possible. The minimum…
Here's a remix of a clever disposable mixing tray. The original was 1x2 inches - quite small, and for my big hands too small to hold. Then I made it stackable, and more compact form factor by shortening the mixing stick. Mix up paints.…
Strong 3D printed version of the Kumihimo Disk found on Amazon. This is obviously hard plastic, so it's a bit more pressure when slotting in the paracord, but the good thing about that is how much more tight you can make the knot. It…
Batman Disney Infinity Style
Bonito logo de Disney con nombre para ponerlo en la puerta.
A simple bin that fits and displays the Field Notes notebooks. It fits 6 comfortably. The attachment system means no supports are needed and this is a very simple clean print. You also need to print the 2 small “hooks” that are common to…
one Wheel on my Dishwasher broke so i disinged a sparepart for it.
Bottom face down, print with support to get the best result.
This is a replacement spring disc located at the top of sailing winches Andersen Self tailing. Print with supports. PETG worked fine for me.
Hello, I have Rincewind from Discworld for you. A very nice character from Terry Pratchett's book. Nice for display and coloring. My kids love these characters. Good luck with the printing! I used PLA/PETG as the material. Need to use…
These are stands for displaying Technology cards in the board game Voidfall. They are designed to improve card visibility and reduce the footprint of the game on the table. The Technology Tableau displays up to twelve different Technology…
FRENCH: cette pièce permet d'évacuer les anciennes amorces lors de l'opération de désamorçage sur une presse à main automatique Lee Load-Master. Sans cette pièce les amorces tombent en vrac dans le cylindre et salissent rapidement…
Sanding Disc Holder added on the HWS Snap in hexs
To change you need to use Solidworks 2022 or later
FR/ Support pour outils d'imprimante 3D compatible IKEA SKADIS remplissage 10 ou 15 % support obligatoire US/ IKEA SKADIS compatible 3D printer tool holder filling 10 or 15% need support
A rather simple coffee needle distributor (WDT) using regular sewing needles, and with two different stands. It supports up to 7 needles. I wanted something with sturdier needles compared to the regular ones that use acupuncture needles.…
his is a small sign for the IKEA skadis pegboard. It takes up two holes on the pegboard. It is designed in two parts. One part is the holder and the other part is the sign itself with the text that slides onto the holder via a dovetail…
This is a pym particle disc I designed based on the Ant Man series. It is set up for multimaterial systems it also is designed for no supports. Youtube Video:
I used 10% Gyro infill Tree Support Slim, any support recomended
This model should work for a large range of rolls but, as is, it is made to fit a Ø32mm gift wrapping roll. You can modify the parameters of this model in In Fusion360 to suit your needs. Printing information: Split the model to its parts…
One of my best friends works as an Occupational Therapist in our local school system's special education unit. One day she was sharing about how she experienced a breakthrough when a nonverbal autistic child was given a set of wooden…
Reference model for IKEA SKADIS 56x56. Fusion 360 and STEP files included.
Overview Declutter your collection and showcase your miniature rides with this Stackable 1:32 Scale Diecast Car Platform . Designed specifically for 1:32 scale models (commonly known as "3-inch" cars), this modular display system allows…
Discord: https://discord.gg/nJvfCKD2jx a community Server to chat share projects etc. Picture 1 and 2 made by https://www.printables.com/@LuciferShrimp Available as Hexagon, Circle or as a Line A display / stand to make some decoration…
For "cigarette lighter"-style sockets. Print as shown - no support needed.
Lampe max displace – Phantom Description J’avais déjà réalisé la lampe Phantom (une de celles qui a eu le plus de succés). J’ai repris le concept des ondulations de surface, augmenté sa hauteur, créer une « bosse » supplémentaire. Ensuite…
Modelled to be as close to the original as possible. Save yourself the 4-6 week wait for Multix to send you one. Whether you need to replace a hook to existing Multix dispenser system hook (older style. I might order a new type to model…
Hold all your gluesticks in one area ready and close by your 3d printer.
Cleaning set, in which you can have the soap container, sponges, etc.
support:yes support type:tree raft:no brim:no nozzle size:0.4mm My flight rating is 2,2,0,0.5.(Probably wrong. I'm not experienced at flight rating discs)
My kids have a quite large assortment of playdoh in small containers. Once emtpy, the make a good container for small items
This is a display cover with a clear window, to almost see, what happens on the LCD. Main functions: dirt protection LCD look through This is my first model and since i don't have the 3D file of the display, i tried to generate a cover…
Changed the holes/hooks to my prefered system
Cardholder for Sleeved Cards – Universal Design This 3D printed cardholder is the perfect solution for storing and displaying sleeved cards, making it ideal for a wide range of tabletop card games. Whether you’re organizing your…
Just a remix of the dispenser - the rest is still the same, use the original thing to get the rest of the organizer. The "pin" setup was too tough for me to get right (the pins would droop and not fit, etc) so I added some depressions for…
This is a LaCie HDD stand which I've designed for myself. The Stand is compatible with the LaCie Mobile Drive's 2.5'' and the LaCie rugged 2.5''. All slots are of the same size. I printed it with 0.2 mm Resolution with PLA. The only Issue…
Description: This 3D print model is designed to facilitate the mounting of a Stadis pegboard onto a Torfast storage rack. The fixture consists of three primary components: 1. Bottom Clamps: These two clamps secure the bottom of the…
Perfect for LEGO minifigures series. Hangable, made for M3 screws. Print lego_display_stand piece twice.
This is still a work in progress! I haven't gotten a chance to actually cut this (waiting on parts/time) yet. Putting it out there anyway. This is a Control Panel for the K40 Mini (the 30w, smaller version) that incorporates a…
I designed this for sponges that are 102x62x21 mm, but these measurements can be altered easily using the .scad file if your sponges are a different size. The .scad can also fit different numbers of columns and different heights. Cutouts…
