Counting matching models…
I had this second hand gas heater, the Truma E2400, but this part was missing and it appears to be smaller in diameter than the spare parts you can buy …. So I designed one (from pictures & measurement of the parts you screw it on) and…
Needed a shift book bracket from my e28 and saw a couple of posts on eBay that were 3d printed and thought "wait I have a 3d printer, ill just design my own." So I took some measurements and pictures and came up with this design. Its far…
This is a 10x10 VESA adapter to mount any VESA compatible monitor to the stand of an HP E243 display. Please note that some bigger monitors might be to heavy for the spring tension of the height adjustment of the stand. printing…
This was made specifically for snap on set P/N: 213AFLEY which has E4-E10 E-Torx Sockets in ¼" drive, E11- E14 E-Torx Sockets in 3/8" drive, and E16-24 E-Torx Sockets in ½" drive. It also has an extra spot for a 3/8" drive E10 E-Torx…
Headlight adjustment knob for US Ellipsoids in E30 / E24. Mates with PN 63121385397. This is meant to be used as a tool and not left installed permanently. Note: I've only tested this on my US 1990 325i E30 Coupe. I have not tested the…
Description Needed to organise my collection of resistors. Couldn't find anything suitable so created this one. Features ; 24 drawers, each with 7 compartments. This suits the full E24 series of resistors (from 0.1 Ohm through to 9.1…
Now updated to fit with an installed SD card Screen Case and Mount for the Waveshare 2.1" Screen for Gaggia Classic E24 for GaggiMate. Needs 2-4 M2 Screws to hold everything together. I recommend using the new simplified screen mount. It…
I'm pretty sure someone has already made a vase of a similar kind. However, I designed these and I would like to share them with you. There are 4 different models: 2 are thin and tall 2 are thick and short (either rounded or linearly…
The door handle trim on my BMW E28 broke so I created this 3D printed replacement. I know this part is still available and cheap but I wanted to practice my 3D modeling and printing skills. This is a replacement for BMW part number…
E-Torx Shallow Socket E4-E24 Tray - Gridfinity Compatible 1x6 E4,E5,E6,E7,E8,E10,E11,E12,E14,E16,E18,E20,E24
My friends BMW E30 M3 needed a new fog light holder, so I designed this by measuring the original part. Designed for the right side, but with mirroring it should be useable for the left side, too.
This is bushing for the upper radiator mount. You need two of these. Part Number: 17111150984 Print using TPU! 3 Walls, 30% gyroid infill
This is a headset holder for Lenovo ThinkVision Displays like the E24q-20.
organizer tray for kobalt e torx set holder organizer 13 pc e4 - e24. Got these in the 153 kobalt kit
This a remix of Mosher's Gaggia Classic Drip Tray for Bookoo Themis Ultra . Printing Notes: I used Polymaker Black HT PLA-GF for this print. No special tweaks needed. I always suggest at least 3 walls and 25% infill....but I like my parts…
E24 (also E12, E6) 1 Ohm ~ 10MOhm resistor value labels for Harbor Freight 40 bin Organizer. There seem to be 2 versions of this organizer. These labels fit both. Some bins will fit looser than others. Lightly sanding the edges of the…
Tool for adjusting both low and high beam lights on certain classic BMW from late 70s and early 80s, such as: 5-series E28 6-series E24 7-series E23 Fit for cars equipped with 3/8" square-shaped plastic adjustment nuts (P/N): 63121362049…
Replacement grid to print for the Truma Gaz Heater E2400. Diameter 80mm Height: 20mm
The model is very easy to print. The puck screen holder is 60 mm wide. The tamper slot has a diameter of 65 mm, which provides enough space for all common round espresso tools I’m aware of. The espresso stirrer holder is 50 mm deep and…
The original stoppers are often cracked, because screws made in other countries are screwed to the BMW plant, rust and push the body apart. I tried to look the shapes of both stoppers as much as possible.
BMW E24 Clamp for Headlight cleaning system. This part is no longer available. 61661362211 61661362212
Keep your puck screens clean, dry, and within easy reach with this simple holder designed for the Gaggia Classic, Classic Pro, and E24. The holder clips onto the machine's upper ledge and provides storage for up to two 58 mm puck screens…
Hi, the 2 parts interlock no screws required, than simply snap onto the monitor. print holderleft to attach it to the left side of your screen. mades welcome. Print Settings Printer: Creality CR10 Rafts: Doesn't Matter Supports: No…
It's nearly impossible to get replacement Gaggia neon bulb assemblies, so here's a replacement design. Parts: 18 AWG silicone jacket wire BN 0.75 (22-18 AWG) crimp ferrules 230 VAC Neon Lamp - 5mm x 12 mm or 5 mm x 13mm…
A replacement hood rubber mounting for many BMW models. This is a replacement for BMW part number 64111369828 . I created this part for my BMW E28 but it is also used on the BMW E24 6 series. Recommended Print Settings: TPU 0.2mm Layer…
Just follow the original instructions.
A replacement hood rubber mounting for many BMW models. This is a replacement for BMW part number 35411152744. I created this part specifically for my BMW E28 535i with the M30B34 engine. This grommet is designed for the an accelerator…
A simple funnel for the Gaggia Classic porta filter.
Top: I printed with 3 walls and whatever % infill. Bottom: 10-20% Gyroid Infill no Wall, Top or Bot makes for a nice squishy bracket. I Printed in TPC for higher Tg and 10% infill (could be lower) because TPC is quite stiff. TPE or TPU…
Here's a little portafilter holder I made. It was designed and works with the stock Gaggia E24 portafilter. It might work for other models too, but I can't confirm. (if you have a different model but an identical portafilter it would be…
This two-part slide-on mounting system allows you to mount an HP EliteDesk Mini PC directly onto the vertical column of an HP EliteDisplay monitor stand without taking up desk space. simply slide the brackets down over the monitor post…
Adapter for E12 Fuse box to fit late E24/E28 Relays. Not sure if there are some other versions, but this fits the Motronic 1.3 Relays and 1979 E24 Fuse Box.
My car never had the original part, which you also cant buy anymore, so this is just based on the tank and pictures I found online. You will have to buy part 61311388548, preferably aftermarket, because you will have to cut it open and…
BMW E24 Clamp for Headlight cleaning system. This part is no longer available. 61661362211 61661362212
A simple funnel for the Gaggia Classic porta filter.
It's nearly impossible to get replacement Gaggia neon bulb assemblies, so here's a replacement design. Parts: 18 AWG silicone jacket wire BN 0.75 (22-18 AWG) crimp ferrules 230 VAC Neon Lamp - 5mm x 12 mm or 5 mm x 13mm…
Print the mount in upward position. So there should be no issues.
Simple prints w/ no support. Used for web cameras, trinkets, and the likes with a bit of adhesive.
Simple model of funnel for Gaggia classic E24 (single, double filter). Print: PLA, PETG 0.2mm layer height consider set brim in slicer
Had a lot of cables and Webcam, which I could not mount on the LCD. So I made the hook for cables and a small platform for Webcamera. Also added Freecad model just in case someone want a remix.
To assemble, buy a E24 fitting and sand it down slightly. Pressfit (or glue) this into the spacer and then slide and glue the bowl over it to close it all. Add the cable and close with the endcap :)
