Counting matching models…
The Heatbed Cable on my MK3 was starting to sag and catch on the frame of the printer. So not wanting to pull it all apart I made a simple clip on support that does not require any tools or disassembly to fit. There is also a version for…
This is an UPDATED/redesigned 2.0 version of my insert and organizer for the board game “Wondrous Creatures". It will help organize the game and facilitate quick setup, teardown, and gameplay. It can hold everything from all the…
Dimensions are completely parametric. You can define : the filet (D) inner diameter (D) outer diameter (OD) length of the insert (L) outer diameter of the thin part of the flange (D1) outer diameter of the large part of the flange (D2)…
Tee piece for heater hose 3 cyl 1.0lt Daihatsu Sirion/Toyota Duet
This is a Model of the power beat unique weapon from star field. This is part of this years games to life project for 3D Printopia 2024.
Easy to Print 110.63mm x 200mm, 2mm thick. Prints in around 1hr 30mins on my P1S For multi extruder printer, split into parts then select the parts for the second colour (first part in normally the base colour layer, all other parts are…
This clip connects onto the back of the Lego Wreath Branch when using it in a 45 degree angle (6 branches) configuration.
Potřeboval jsem označit kabely domácího kina. Určeno pro dvoulinku do 8 mm šířky. I needed to label my home theater cables. Designed for two-line up to 8 mm wide.
Updated 2025-01-25 Added extra long (~2.5in) hook version in the original design. New hook design version with a “lip” to help prevent things from accidentally coming off (that is in addition to the slight angle (1-2 deg) inwards that all…
You can buy this model printed in PETG along with the needed gaskets so you don't have to buy a 50 pack, message me! Disconnects the Heater Hose Fittings on 2012-2018 Ford Focus 2.0L and 2013-2016 Ford Escape 2.0L Eco Boost. This video…
Conector de la base calefactable de la Prusa MK4 a 90º (Inspirado en “Prusa Mk3 Ring Terminal 90 Deg Heatbed Cable Cove r” de GrubbyZebra), y con el cual se reduce la longitud de la mesa en aproximadamente 30 mm. Impreso en PETG.…
Hide a fat roll of benjamins with your bananas in the kitchen, or use as hot dog storage? Maybe give as a gift and see how long it takes them to open it. The threads are pretty tight right off the plate, so you'll have to twist back and…
This is a motherboard mound for the Milo 1.5 with the same exact spacing as the LDO kit fly board comes with. You can keep the t-nuts in the same exact location. Small 3m heat inset from the back. Opening is 5mm for the heat insert
I wanted some Dungeons and Dragons-themed studs for @MagnumDanger's giant LEGO holiday wreath, so I put together these owlbears. They are kind of ridiculous but they made me laugh. Printed this with supports. Thank you @MZ4250 for the…
It's basically a 1" pole mount for the popular European model of fence posts. The fit is very tight, you may want to use a hammer. It's intentional to make sure the station is as stable as possible.
If your Nextruder heater stucked on block you can use this tool. Place heater block with this tool and hit the protrusion on the heater Then it will be loosen You can use hammer or screw driver CAUTION Please be careful with your hands!
too lazy to order the original part but not too lazy to make my own
I was looking for Halloween stud ideas for @MagnumDanger's giant LEGO holiday wreath and found this amazing gothic bat, perfect for a Halloween wreath, or any other spooky & haunted occasion. I printed this with supports and finished it…
Don't let a broken reel seat ruin your fishing day. Replace your broken (or just boring) reel seat with this 3D printed replacement. Installation instructions Remove the reel from your fly rod Unscrew and remove the existing reel seat…
Simple seatbelt clip for changing the shoulder strap position. Minimal material with reinforcement where needed for rigidity. I would suggest printing in a heat resistent filament as it will be in a vehicle.
3 stamp wheels from the Leather Middle Collection Vol.1 (1-3) These digital 3D printable models are meant to be used to create textures in clay, polymer clay EVA foam, and other materials. We want to make more models like this. If you…
A dock for charging the first generation of Beats Studio buds earphones
Tee piece for heater hose 3 cyl 1.0lt Daihatsu Sirion/Toyota Duet
3D Printing Cost & Profit Calculator - Comprehensive Excel Tool for Makers and Businesses Take control of your 3D printing expenses and profit margins with this easy-to-use Excel sheet, specifically designed for 3D printing enthusiasts,…
This is the 7th and current design of my 4-beat note tray to hold the music note duration manipulative pieces found here: https://www.printables.com/model/615947-music-note-duration-manipulatives The design has been tested extensively…
This can hold an adafruit feather or featherwing neatly on top of the stacking headers to make it easier to solder.
Its a seatbelt guide that mounts to the tonneau cover bolt. You will need a m6 30mm long bolt, the original is too short. Recommend to print from PCTG ASA or Nylon. However i have broken some ASA seatbelt mount designs in the past, its a…
Modern toilet roll holder with hidden base. Print in PLA or PETG Print Settings Arm - 50% infill - 0.2mm Mounting Plate - 100% infill - make this part solid Base - 20% infil, 0.2mm, I did set the my perimeter setting from 2 → 5 to make…
This is a simple frame to fit around a wifi thermostat (can be found on Aliexpress) The model I have is a Beok Tuya WiFi Heating Thermostat My previous thermostat was wider and there were marks on the wall so this covers it up and covers…
This was requested by my Aunt who loves making frozen treats for her dogs. Very quick print. Plug the small hole of the dog toy… Fill with chicken broth or peanut butter or another dog safe filling… freeze…. remove plug.. give to dog to…
100x160mm sign, reading “I am a meat Popsicle” with art of a frozen confection. Best with color switch above 1mm, as with included gcode file. Also see the Shadowbox Frames , into which this and the rest of my sign collection fit.
This is a very simle print to organise your towels on the radiator. Quick installation, no drilling or gluing required. It can be easily hung Any position on the radiator at different heights and any time intervals.
Updated 2025-01-23: see below for details. The french cleat duck hook model is great but I needed something bigger. There is a remix that makes it bigger but that was still not long enough to hold extension cords. The hold part also was…
…Please be sure to hit like & post a make, I'd love to see your prints! WARNING! If you do not know how to wire this system correctly & safely I STRONGLY recommend you DO NOT attempt to print or use this model as you are dealing with…
This is an adapter to allow filling sausages using the meat grinding accessory for the Bosh MUM5 kitchen robot. There are two sizes to fit smaller or larger membrane diameter. You need to print the disk which replaces the meatgrinder disk…
Prusa Referral Program: Need to upgrade your Printer? Referral Links🔗 for an extra 1kg PETG Urban Grey at checkout with the purchase of a Prusa Core1 / L / XL . Prusa T&Cs . Allsky Meteorite Camera Inspired by the Thomas Jacquin concept.…
NEW VERSION AVAILABLE HERE: MUTUAL AID IS HOT Material: Regular PLA is okay. Avoid especially brittle filaments. ASA, ABS or PETG are preferable. Nozzle Diameter: 0.8 mm Layer Height: 0.3 mm Infill: Turn off Top and Bottom Shells: Turn…
I struggle making round meataballs. My paws are too big, I'm clumsy and I get ground meat stuck to everything. Many commercial meataball presses suffer from the meat getting stuck inside the hollows, and require you to pick out and…
I wanted to avoid using batteries to power the station, so I needed a place where I could run the cables through (wires in the picture). Drilling through the supplied mounting rod was not feasible and it is not hollow, so I used a 16mm…
When in doubt, eat bread. I designed this jewelry set as a surprise for Twirlygrl. (Shhhhhhhhh!) Size up or down but watch the size of the post hole. You can also make a necklace or pendant for other forms of jewelry. For the findings to…
Hi Guys, I created a spacer for the Shotgun Pro Seat. It works with every bike that has the Acros Cable intergration through the Headtube. Just directly put the Shotgun Spacer Cable directly onto the Top Cap, where the cables are coming…
This is designed to be used with MagnumDanger's Lego wreath. Based off a piece I had in my Lego bin, I reduced the height a bit to make it more wreathy. No supports are needed in the hole section. But you will definitely need to support…
Each pose has two options with stripped down armor for extra variety in your demonic cohorts.
A cover to make the adapter protruding above the frame look better when using the 34.9 to 30.9 conversion adapter on the pole voima. I think it might work when using the adapter to convert from 34.9 to 31.6, but I haven't tried it.…
Tool for easy cleaning holes of Bosch meat grinder drilled disks. Tested on MFW3X17B model. Printed with PETG but other materials can be used as well.
for 23mm handler for big soldering iron made for https://www.printables.com/model/1038915-fully-3d-printed-heat-set-press
From 1847 to 1996, Rocky Point Amusement Park was a choice destination for Rhode Islanders. Located on the Narragansett Bay shore of Warwick, Rhode Island, Rocky Point offered thrilling rides, exciting amusements, and their famous shore…
This is a heat exchanger for 6in ducting. As an example, I used it to temper incoming makeup air for a basement kitchen hood's exhaust. I printed using carbon fiber reinforced PLA. I don't have the equipment or knowledge to test the…
This is a bracket for a 3/4 inch French cleat system. Autodesk files included and parameterized for other cleat sizes.
The heatsink of a Noctua NH-U12A is quite large and heavy. Although the motherboard should be capable of supporting its weight under normal circumstances, I don't want it to destroy my motherboard under less ideal circumstances…
This small stud for the large lego wreath has added small detail with a snowflake.
Info: The holes for the candles are 22mm and 250mm print hight is needed. Print Settings: 0.2mm or finer Layer hight (especially for the no. 3) PLA 3 walls/perimters 15% Gyroid Support Auto-Tree (but the outside of no. 4 looks not so nice…
My main recommendation is to use a seam painter for the outside of the jig, otherwise it left a raised area inside each arc.
Volvo XC90 Folding Folding Seat Latch Release Handle (Rear, Interior code: RXXX, RXXX). Volvo original PNs: 39826799 ; 39826801 Two files, with and without Volvo logo available. If printed in high strength material (PETG, PCTG, PCCF etc),…
My kid is super into Roomba and generally into all sorts of robot vacuums. There aren't many toys out there for him so I made him a little Neato inspired one. Print it at 50mm for a good pocketable size. Print at 200mm for a huge toy. Let…
The hammer is not functional it is theater prop, I made it lightweight with exaggerated hammer head to make it more noticeable on stage. There is no any logos on the hammer. Model has two separate parts (the head and the handle) you can…
UPFRONT! I created a Discord channel for my Thermal vision builds but will add a #meshtastic channel there as well in case you have questions or problems. Please remain to the meshtastic channel for all sort of questions as all the other…
** 9-Mar-19 Have tested with a 6000mAh battery and works fine. Removed the thread for the Thunderboard hole and changed it to support a UV Sensor stalk. I have removed the Thunderboard from the Remote unit back to the base unit. 18-Feb-19…
print both it has 3 coasters ams compatible may need to resize holder
These are the 3d printable parts necessary to help you motorize your 20lb sausage mixer. The tutorial and complete parts list can be found on YouTube here:
I made a knife sheath for a friend who's into fishing. I didn't model the knife sheath exactly to the size of the blade, so there is some slight wiggle room, but it's otherwise nice and tight on the base when the sheath goes over the…
I printed this with Arachne wall generator. The text prints best this way. Other than that, use default settings with a 0.2mm layer height. Swap colors halfway. The sliced file for the Prusa Mini has the filament swap included. Are you…
Print with supports on both parts. I printed this stand at 100% scale to hold it.
Its an Adapter to put a 165mm (or in my case a D-165i from Reckhorn, which is 175mm) speaker into the doors of an 3 door Seat Ibiza 6J Sportcoupe. You need to get this adapter if you want to put longer speakers into your frontdoors…
Its an Shifting Stick for the Seat Ibiza 6J You need an M4 Thread drill and 4x M4 Screws with a length of 10-70mm (DIN912)
All you need is a Creality Filament Dryer 2.0 and some wires, bringing the total cost to just €38 (excluding the filament). The electronics are repurposed from the filament dryer and reused in the enclosure. For the screws, you’ll need 2…
Add a galactic twist to your holiday decor with this pack of Star Wars-themed Christmas ornaments. Featuring iconic characters like , Yoda, R2-D2 and C3PO, these 3D models are perfect for creating unique and personalized ornaments. Each…
Just a fun little mobile. The sizes of the feathers and the length of the rod are designed so that the tips of the middle feathers barely touch the soles. You can see the assembly diagram in the fourth picture. The feathers on each level…
See the original model for a full description.
I used: PETG .2mm Layers 4 Walls 20% Cubic Infill No Supports Opening for soldering iron is .7'' (18mm). You may have to scale +/- to fit your soldering iron.
Link two tablet supports to have a single one in the center, so the kids or passengers can watch the same shows. Can be used between the back or front seats. It's only compatible with supports that use a swivel ball joint. Files are…
Use case and features Use this angle bevel whenever you need to transfer an existing, unknown angle to a new working piece. It is ideal for laying tiles in a room with non-90° angles, doing woodwork or making any strangle formed pieces…
I've scaled this wreath branch up to 200% and added a simple hook mount. I wasn't able to find any others that suited the 200% scale size of the original wreath of Magnum Danger. No need to scale this any more, print it and enjoy! No…
Small model which fits 4 Kenwood Beaters. It's purposely designed with a small distance between the accessories to save space in the cabinet. The mount holes are measured 12.6mm, so they should fit the standard Kenwood Beater pins which…
About I've got two Adafruit ESP32-S3 Reverse TFT Feather and without any enclosure or stand it is a bit inconvenient to use them, especially if you have a lot of other tools on the messy table :D Thus I mixed gridfinity bin 1x2x2 from the…
EN: The door wreath, which we had attached with decorative ribbon, kept coming loose because the adhesive tapes were slowly coming off due to the pull. As I didn't want to damage the door by stapling it, I came up with this device. It…
An insert that fits neatly into the main box of Cthulhu: Death May Die - Fear of the Unknown and holds all the cards and tokens. There is some room left for extra cards. It fits the relics, insanities and mythos cards sleeved (I use…
This brackets are replacement parts for your BMW (G20/G21/..) All-Weather Floor Mat and are used to hold the metal inserts around the BMW logo in place. I lost mine during a car wash and this part can't be ordered. I could have only…
S37x9 - Wandhalterung - “French Cleat - Adapter” - für Zubehör auf Basis der Lochwände mit 37x9 Raster ( 9x9/37er Raster ) - Kompatibel mit: S37x9 oder Garant ( easyfix ) => Umfangreiches Zubehör vorhanden Wandhalter: 91 - Wandhalter -…
Credit for the teleprompter goes to KatzCreates: https://www.printables.com/model/90999-camera-lens-mounted-teleprompter
Death Racers are like remote-controlled Rock ‘Em Sock ’Em Robots! Drive them around and compete against two or more other racers to try taking off your competitor's head! The Death Racers were the brainchild of Michael Baddeley and Sam…
Thanks for @WhiteCliffs_1358902 fantastic Death Star cover for Google Mini I re-mixed the base for wall mounting. Print as the original, I added supports on base-plate only orientated with the flat on the base. Nod to @ThijsMang_316301…
This is a heatsink spacer for my microinverter project . Requires heat resistant filament (ABS as a minimum), the more resistant the better. For MCINV5 / MCINV6 / MCINV7 / MCINV8.
The build print the necessary parts press fit the Y axis aluminum spar in to “base 2.0” run wires thru the center of the spar screw in a m3-16 bolt in to the base flush against the wires screw 4 m3-20 screws in to the base in holes after…
The project: I got an awesome printer renovation and conversion project from a colleague at work. Converting and upgrading a Creatbot D600 industrial 3D printer. It has a massive 600x600x600 build volume and dual extruder with 5KG spool…
I mashed this up for the fellow Lego Wreath lovers out there, now you have another festive day to use the wreath for! I used a stud from MagnumDanger's Lego Wreath Design and found a rose model uploaded by print___time which i edited to…
This holder is designed specifically for 15mm plywood and allows convenient and secure storage of up to six bench dogs using the French cleat system. Its sturdy construction ensures the bench dogs stay in place while remaining easily…
Edit 2026-01-19: V3 with rotation feature. I've created a model of which you can rotate based per seat inclination. You can reuse an GoPro M5 thumb screw and a M5 nut to tighten the assembly. V2 model has a fixed angle. both models slide…
notes: Uses M4 hardware (link) Angled to match seat tube (approx 16º) If needed, I included an stl with posts to help support the floating mount. I was having trouble with supports. 0.15 layer height 6 wall loops 15% infill gyroid PLA+
The spool easily screws together to accommodate the sample scroll. The locking feature ensures easy spooling of lefterovers from larger spools that takes up unnecessary space or samples. Measurements: Inner diameter: 70 mm Outer diameter:…
Material: PLA, PLA+, PET-G, … 4 Bottom- & 4 Toplayers, 2 Walls, 0.2mm Layerhight, 12% Infill With these numbers you get a suitable playset. Depending on the print settings, you will need approx. 1kg of filament. 1 unit => 40x 2 unit =>…
It's made to be a keychain. Put it on your bag or something, just to show you're a hunter, for those who know. Dimensions: 29.40mm (width) x 58.60mm (length) Height varies for each model. Loop is 15.64mm wide and ~4.25mm tall.
This model features a rotating fish on a spit that dispenses food for your pets, and a spinning campfire below to add to the enrichment! Designed to be printed on small bed printers and in multiple parts. All parts fit snug as is but may…
