587 models
I was quite surprised that I did not find any frontplate for the Elgato Stream Deck MK.2 so I had to try to make one on my own. Actually this is the first prototype (printed at 0.30 mm) and so it's far away from being perfect. But it fits…
Print approx. €0.78–€0.95 excl. taxPreliminary estimate for PETGSource material: PET
Disclaimer: this is provided as-is to tweak your own profile, use at your own risk. Rename the file to .curaprofile to import. You will need to adjust this depending on your filament. This profile is based on Elgoo Rapid PLA+ and a stock…
Print approx. €0.17–€0.20 excl. taxPreliminary estimate for one variant
So I decided to make a better design to hold my Elgato Stream Deck Mini on my desk. This mount uses screws or may even work with strong adhesive of some sort. The four holes on the mount use 4.15mm screw hole spacing, I used two of the…
Print approx. €3.76–€4.60 excl. taxPreliminary estimate for one variant
Printed without support Designed to be mounted with wood screws from the back. CAD Model…
Print approx. €8.80–€10.76 excl. taxPreliminary estimate for one variant
The Elgato Light Air comes with desk stands and a knob to attach to it. When using a desk adapter, the light hits on the support and does not allow to tilt enough for proper lighting. This model allows to extend and then tilt the light…
Rotates the original Stream Deck to portrait while maintaining the same angle. The stl has the cable on the left side. If you want it on the other side, just mirror the object in Prusaslicer. Dont forget to rotate your icons before…
The provided 3MF File is prepared with all my modifications. The Back Part needs Supports for Printing After Printing the Back Part, you need to punch through the 2layer supports for the M8 screw (if you want to use this Fixing Method) I…
Ersatz für einen verlorengegangen Halter für ein Rad auf einem Felgenbaum. Durchmesser innen ~35mm (Baum), außen ~146mm FreeCad Datei incl. - Abmessungen sind im Spreadsheet “data” konfigurierbar.
Bij de kinderen zag ik deze vrachtauto liggen en dacht…..3D printer. Alle onderdelen worden apart afgedrukt. Ik ga ze lijmen, maar er zijn in de boven en onderplaat ook verstevigingen aan gebracht om er kleine vijsjes in te draaien. Ook…
Print approx. €0.30–€0.37 excl. taxPreliminary estimate for one variant
This is a knob (diameter 15mm) where you can embed an embedment nut M4x6x6.
Print approx. €0.52–€0.63 excl. taxPreliminary estimate for one variant
Nach dem der Original-Griff abgebrochen ist, hab ich den Griff nach konstruiert, gedruckt und mit der Kehrschaufel verklebt. Der Griff ist so gestaltet das der Kehrbesen hinein passt. Gedruckt in PETG, ist dadurch sehr Stabil.
Want to access even more models not found here? Interested in supporting my efforts making free models for the world to enjoy? Check out my patreon page here: https://www.patreon.com/mz4250 Patrons have access to all my files in one…
🇷🇸 Добродошли у Србију Welcome to Serbia! This model was designed by Dany Sánchez . The Church of Saint Sava is a Serbian Orthodox church located in Belgrade. It is one of the largest Orthodox churches and even ranks among the largest…
Circuit de Spa Francorchamps, Stavelot, Belgium, on a stand with it's name. Race track 3x3 mm Stand 198x3x15 mm Gap for putting the track into the stand 0.1x0.1 mm bigger so it's easier to assemble. Looks best when separate parts printed…
This is an under-desk mount for the Elgato Stream Deck+. If you detach the base of the Streamdeck, you can use the two screws its attached with to screw it into this mount. Then you'll need two other screws to attach the mount to the…
Its a Streamdeck Holder /Slider for under the Desk V2. 4 Wall 30% Infill 3-4 Solid Top and Bottom Layer Many people had the problem that they couldn't get the parts together. I have now made a recess in the part with an adhesive part.
It also fits any printer with a 20x20mm aluminium extrusion
With this faceplate design, I've tried to really mind the details on the inside of the original plate which is part of the way it locks into the unit. The model that I printed was more on the snug side, which was sort of what I was aiming…
Da ich leider nirgends was gefunden habe, habe ich mir eine Blende für das Stream Deck XL hergestellt. Die Abdeckung hält gut ohne weitere Befestigung, natürlich könnte man diese noch mit doppelseiten Klebeband fixieren.
I measured and recreated an Elgato Stream Deck [5x3] so that I can later use it to design custom mounting solutions to be 3d printed. If you found this useful, please throw it a like. If you notice there are any issues with the model and…
I didn't want to have my Stream Deck on the table, but under my table and so this model was created, I hope you like it. I glued my Stream Deck into the frame with double-sided adhesive tape.
I got the inspiration for this project from an excellent video by the ingenious Robert Murray-Smith. I implemented the electronics exactly as described there - except that I also added a voltage regulator. This small handheld generator…
The convenient mount for three Elgato Stream Decks provides optimal organization and simplifies your setup. The sturdy, custom design accommodates three Stream Decks and is ideal for streamers, content creators, and gaming enthusiasts.…
Selbstkonstruierte Felge, gedruckt aus weißem PLA (Anycubic)
The original stand positions the Stream Deck XL at an 50° angle. I needed a steeper one to get rid of ceiling light reflections in the buttons, so i designed a replacement with an 63° angle. You will need 12 5mm x 2mm magnets to snap in…
Belgian water hydrant for steam locomotives. scale 1:87 for H0 This is what I believe to be the Majolini version, likely often modified to have the valve at the base of the hydrant. Dimensions come from an old book “Manuel du piqueur des…
A heavy, muscular draft horse model with subtle layer-line texture that makes it look freshly 3D-printed straight off the plate. Clean proportions, strong stance, and great surface definition for anyone who loves sculptural prints or…
There weren't any grids available for the Air version of the Key Light. So I made my own. Just print without support, snap it on and enjoy! My own print as pictured is printed on Bambu X1C in Bambu PLA-CF @ 0.4mm
This is a remix of kyleireland 's Stream Deck desk mount. I've made it more suitable for under monitor mounting. I used double sided tape to mount to the monitor and hot glue to mount the Stream Deck to the mount. Supports are only needed…
Die Felgen sind in "meinem" Standard-Offset konstruiert (je nach dem welche Karosserie ich fahre). Falls ihr andere Offsets braucht, kontaktiert mich einfach. Ich werde dann weitere Variationen hinzufügen. Beachtet meine Offset-Tabelle.…
Dies ist das Basisteil dieser Felgenserie. Sie besteht aus einer dreiteiligen Felge mit einem Durchmesser von 200 mm. Eine wirklich lustige Idee zum Aufstellen oder Aufhängen an der Wand. Es macht Spaß, diesen Grundbausatz selbst…
3D model of Belgium Spa F1 track 2023 Scale to your desired scale and drop down the Y to get the desired height of the model.
So my Dad has an Elgato Stream Deck 15 Key (20GAA9901) and was wanting a desk mount after seeing my Stream Deck Mini Under Desk Mount which was my first Custom 3D Printed Design. (See new Mini Deck Mount here ) This should have less flex…
On our search for the legendary but elusive Perfect Belgian Waffle, this coaster was created! Designed using Autodesk Fusion 360. Print with wood or beige-coloured PLA filament for extra realism. Enjoy, but don't crack your teeth!
Modern Belgian railroad signal, using the square plate. This is drawn up based on plans and my own measures. Of course adapted to the printing technology. This is the original version for PLA printing, I have worked on a resin print…
I remixed 2 projects. https://www.printables.com/model/731920-elgato-stream-deck-plus-under-desk-mount and https://www.printables.com/model/358532-stream-deck-xl-14-mount To make an under desk mount that fits the Stream Deck XL. this is…
my print settings: Rafts - Brim: NO Supports: NO Nozzle: 0.4 Resolution: 0.16 - 0.2 Walls: 3 Infill: 10% Material: Brand: Prusa Material: PLA Color: Galaxy Black printed on Creality Ender 7
Elgato Stream Deck MK1 desktop stand inspired by the MK2 stand
A simple desktop stand for the Elgato Stream Deck 15 keys version. Print Settings Printer Brand: Ultimaker Printer: S5 Rafts: Doesn't Matter Supports: Yes Resolution: 0.2 Infill: 15% Notes: Turn the STL 180° to print it face down.…
I made this adapter for the Elgato Prompter to interface with my Logitech Brio Webcam. The webcam fits snugly in the adapter and rests against the pegs on the inside. I printed it with supports with generic black PLA. A black filament…
Handle for the Elgato mount ball head that comes with the Key Light and a bunch of other Elgato lighting hardware. Had such a hard time tightening and loosing the little knob that comes with the ball head so this just fits over the knob…
Want to access even more models not found here ? Interested in supporting my efforts making free models for the world to enjoy? Check out my patreon page here: https://www.patreon.com/mz4250 or support me on Printables Clubs! Patrons have…
Want to access even more models not found here? Interested in supporting my efforts making free models for the world to enjoy? Check out my patreon page here: https://mz4250.com/ Patrons have access to all my files in one place, a request…
Belgian (fantasy) worker house anno 1950 H0 1:87 Loosely based on real pictures, you can find this kind of houses all over Belgium. They feature a typical build with rooms under the roof, and low windows on the first floor. Nowadays they…
Der Möbelgriff ist einfach zu montieren. Er wird positioniert und von vorne verschraubt. Die Kappen werden dann eingedrückt und verstecken die Schrauben. In den Löchern Support Material verwenden.
Older style Belgian ‘bollenstamper’, used to manually switch a railroad switch. I'm guessing this model started in the 1960's or even earlier. There are several versions of it, I picked the one I liked most and obtained measures from.…
Das gezeigte Modell im Bild ist mit einer 200mm breiten HPI-Karosserie und mit Offset -3 bestückt. The model shown in the picture is equipped with a 200mm wide HPI body and offset -3. Die Felgen sind in "meinem" Standard-Offset…
Recommended to print vertically.
Deutscher Text weiter unten ++New tighter version added 2025++ version3 I added a modified version. This sits a little tighter… Rim protection for a Mammotion Luba 3000 for the front wheels with protective tires. As a material I used TPU…
Belgian simple railroad signal scale H0 1:87 Created based on pictures and some measures I found (and took myself) There are 2 versions of the pole, ‘lage’ means the phone box is postioned a bit lower on the pole. I added small markers on…
Felgenhalterung für die Wand. Felge muss ohne Reifen sein….
Die Felgen sind in "meinem" Standard-Offset konstruiert (je nach dem welche Karosserie ich fahre). Falls ihr andere Offsets braucht, kontaktiert mich einfach. Ich werde dann weitere Variationen hinzufügen. Beachtet meine Offset-Tabelle.…
RC-Felge ÜBUNG dies war ursprünglich als Basis zur Übung für einen Kollegen ( FreeCAD -Einsteiger) , als Übung zum "basteln" entstanden. Die Maße sind frei ausgedacht daher NICHT passend für gängige Systeme! ABER ich habe die FreeCAD…
Description I use the Elgato Stream Deck 15 as a button dashboard on my NextLevel Wheel Stand 2.0 and have designed a racing rig mount and case for it. The entire assembly consists of three parts: The rig mount plate, which attaches to…
Kugelgriffe mit Durchmesser 20 mm und Gewinde M5, M6 & M8, Durchmesser 25mm M6 & M8 und Durchmesser 30 mm und Gewinde M8 & M10. Gedruckt mit PLA, 2 perimeter und 15% infill. Ball handles with diameter 20 mm and thread M5, M6 & M8,…
Das ist ein Brodit Adapter der es ermöglicht folgende Handyhalterung zu adaptieren: https://www.amazon.de/gp/product/B078NPPQML/ref=oh\_aui\_detailpage\_o00\_s00?ie=UTF8&psc=1 Bei der Brodit Halterung beziehe ich mich auf folgende:…
Die Felgen sind in "meinem" Standard-Offset konstruiert (je nach dem welche Karosserie ich fahre). Falls ihr andere Offsets braucht, kontaktiert mich einfach. Ich werde dann weitere Variationen hinzufügen. Beachtet meine Offset-Tabelle.…
Nabeldecken für viele Serienfelgen der Marke Alfa Romeo mit 50mm Durchmesser. Original Artikelnummer: 60652886 Die Embleme gibt es sehr günstig aus China wie z.B AliExpress oder andere Gedruckt in massiv PETG. PLA ging bei mir nicht, da…
Ich habe eine weitere PKW-Garage gemacht, diesmal als Doppelgarage mit beweglichem Rolltor. Sie ist wieder ohne Zusatztür, oder aber mit Tür hinten, links oder rechts darstellbar. Das eigentliche Gebäude wird wieder auf dem Dach liegend…
This is a small plate with a wedge head designed to fit the Elgato Key Light Air. I'm using it to attach my Key Light to the wall, but it could also be for ceilings or any drillable surface. This piece slots into stand-side of the metal…
Just a model I made for making a "kicker" I designed to raise the angle by 10°. Category: Computer
EN: This is a remix of Jacoza's comfy, thumb-supported Tomahawk Slingshot . Jacoza's design works with flat rubber bands. I needed a version for 5mm tubes and this is the result. In addition to the remix, the 3MF file also contains…
Bei dem Modell handelt es sich um Felgen welche auf ein Bobby Car montiert werden können. WICHTIG!! Es werden zusätzlich die Original gummierten Reifen von Fulda benötigt. Alternativ kann man sich auch selber Reifen drucken. Diese gibt es…
Mount for the Elgato Stream Deck Mini designed to be attached under the desk. It provides a stable hold and ergonomic positioning while saving valuable desk space.
I needed a carry case to protect my Stream Deck when travelling. This model has thick walls for extra protection and additional space to store the USB cable without putting unnecessary stress on it. The lid clips onto the box. Printing…
I use my Stream Deck in front of me, inbetween my split ortho keyboard, and I'm using a monitor light bar which creates glare on the Stream Deck buttons. To eliminate the glare, I designed a snap-fit base that adds a 10-degree tilt..…
This is an Elgato Keylight Mesh with two cut-outs for the brackets. Can be mounted variably using a small panel. Several connectors are used in the frame, which are slightly tighter and need to be adjusted slightly depending on your…
Since not everbody is keen in designing, I fused together both files for a flat surface. My FDM printer would not print the model with the logo nicely so I went for this style. The difference is that there is no logo on the outside that…
Die Felgen sind in "meinem" Standard-Offset konstruiert (je nach dem welche Karosserie ich fahre). Falls ihr andere Offsets braucht, kontaktiert mich einfach. Ich werde dann weitere Variationen hinzufügen. Beachtet meine Offset-Tabelle.…
I wanted an unbranded streamdeck, so made a simple 15 button module case to sit on my desk. I've also included a PDF file using official step file if you want to make your own.
Since I'm missing a rim, I designed and printed a new one. Element-Number: 4551421 Design-Number: 86652 If you slice it by yourself, don't forget to at the Support material.
This model expands the existing colour options by allowing you to use any filament you have in storage, enabling you to fully customize your Elgato Stream Deck + to match your style and aesthetic preferences—all without paying 19.99€ +…
This stand has a 25 degree incline. Print it with supports. On the bottom there are 2 recessed places for a rubber sticker. If you don't want to add this, just don't remove the supports.
SO MANY FLAGS! 🇫🇷 🇮🇹 🇩🇪 🇳🇱 🇧🇪 🇮🇪 🇳🇬 If you are obsessed with flags, have international friends, or simply don't know what to do with your color filaments, this Flag Coaster collection is for you! Here is the most versatile & popular flag…
Si tienes una mascota de esta raza y te gustan las bicicletas o simplemente amas a tu perro, esta placa te encantará para llevarla contigo en tu bicicleta o en tu llavero cada día. Al generar el slicer, recuerda configurarlo para hacer…
Old style Belgian railroad signal, using the rounded plate from the 50-60's. This is drawn up based on old plans and my own measures. Of course adapted to the printing technology. The base of the model “basis voet” could be modified…
fantasy Belgian ‘frietkot’, designed for the H0 train module of 'De Pijl' 2024 You can read more about this project at : https://www.de-pijl.be/banen/het-frietkot/ scale 1:87 for H0 I opted for the shorter version of the add-on in the one…
Elgato Stream Deck Wall Mount Just print upright without supports Cable can go down or upwards
I've found that I prefer a sliding privacy guard for webcams. When manipulating a cap or hinge design, it's too easy to throw off your framing. This design was a bit of a challenge, but I like how it turned out; no additional hardware,…
This is a remix of the 25 degree stand. This stand has a 35 degree incline. Print it with supports. On the bottom there are 2 recessed places for a rubber sticker. If you don't want to add this, just don't remove the supports.
Print it with normal supports
Here are a couple of Helmets from theHelgate Game, Cheers Jace ;)
Old style Belgian railroad signal, using the rounded plate from the 50-60's. This is drawn up based on old plans and my own measures. Of course adapted to the printing technology. This is an update to the version here :…
This is a re-upload of the Elgato Facecam Flip Cover created by MvRens and re-uploaded here under the CC PDDC license, placing this in the public domain. I've included a 3mf file for Prusa Slicer which includes supports and ironing for…
Die Felgen sind in "meinem" Standard-Offset konstruiert (je nach dem welche Karosserie ich fahre). Falls ihr andere Offsets braucht, kontaktiert mich einfach. Ich werde dann weitere Variationen hinzufügen. Beachtet meine Offset-Tabelle.…
This is a mic stand adapter that enables you to mount your Elgato Wave 3 horizontally. This is especially useful for those who keep their mic under their monitor or in other places where a lower-profile mic is desired. Hole on top for DIY…
Möbelgriff für Schranktüren und Schubkästen. Auf der Rückseite befindet sich eine Bohrung, die passend für ein M3 heatinsert ist. Außerdem gibt es eine Variante für den SLA-Druck, die bereits über ein M3 Gewinde verfügt. Wir haben den…
Hi Ted, I think you might be looking for the earlier version of this helmet. i'll see what i can find, Cheers Jace
Die Felgen sind in "meinem" Standard-Offset konstruiert (je nach dem welche Karosserie ich fahre). Falls ihr andere Offsets braucht, kontaktiert mich einfach. Ich werde dann weitere Variationen hinzufügen. Beachtet meine Offset-Tabelle.…
This model stands out as a display piece, barn decor, shelf flex, or the start of a full farm set if you get wild with it. Prints well in PLA or PLA+ and scales like a champ. Minimal supports depending on your slicer settings
Die Felgen sind in "meinem" Standard-Offset konstruiert (je nach dem welche Karosserie ich fahre). Falls ihr andere Offsets braucht, kontaktiert mich einfach. Ich werde dann weitere Variationen hinzufügen. Beachtet meine Offset-Tabelle.…
This is an adapter to mount an DJI Osmo Pocket 3 to an Elgato Prompter. Watch my video for more details: https://www.youtube.com/watch?v=MmlzIaYuW3Q
Da der Gummi meines alten Schalthebels kaputt gegangen ist, habe ich schnell einen neuen konstruiert. Nachbauten sind irgendwie meistens Mist. Den neuen Gummi habe ich aus TPU gedruckt. Er passte ziemlich straff, deshalb habe ich ihn noch…
My ElGato Wave LP Mic Arm was sagging every time I wanted to adjust it up or down so I reduced the tolerances between the arm and keyed piece. This goes on the upper portion of the arm underneath the screw as pictured and should be a…
Printed with matte pla. Use recommended settings.
We ran into the issue where the supplied thread is to short for the Elgato Facecam, so the cam couldn't be clamped in the correct direction. With this double thread and knurled part, we were able to get the cam facing the correct…
Fanatec DD1/2 StreamDeck Mount Intended for owners of dedicated sim rigs used for both flight and racing. Allows you to mount an Elgato Stream Deck to a Fanatec DD (QR1) quick release when switching from sim racing to flight sims (will…
Kugelgriffe mit Durchmesser 20, 25 und 30 mm und amerikanischen UNC Gewinde No 10-24, 1/4" x 20, 5/16" x 18 and 3/8" x 16 Gedruckt mit PLA, 2 perimeter und 15% infill. Ball handles with diameter 20, 25 and 30 mm and UNC thread No 10-24,…
Print your very own (non functioning) stylish acoustic foam panels! Originally designed for miniatures. Works as a bad coaster, too, at 23% scale
Es wurde eine Bodenplatte und an den Kanten Rundungen eingefügt um den Griff zu verstärken.
![Elgato Stream Deck [5x3] Reference Model](https://media.printables.com/media/prints/117694/images/1147728_39b98eb0-b94d-411a-9fe2-0a8a8ae65f1f/f4c9dcbe-104c-4229-895f-52dfb1229977-2.png)
