Counting matching models…
A 3 X 3 grid of 1 layer high squares for checking that the bed is level. To be used when performing Bed Level Correction as described in https://help.prusa3d.com/en/article/bed-level-correction_2267 . Print instructions PrusaSlicer's…
The original file that I remixed is this , I have added new features to test. I added new things to test like stringing test and the write on the bottom. You can also test a lot of other things: bridging bed level stringing calibration…
Inpired by Maker's Muse's tollerance tests, this is a smaller version to test your printer clearance capabilities
Este es un test de retracciones muy sencillo en el que se intentan probar distintas situaciones y distancias. Además, si el logo de Control3D no sale, puede ser indicativo de tener las retracciones altas Abriiiiiiiiiizos Te dejo por aquí…
If you can successfully print this with NOTHING attaching the rings together, then you should be able to successfully print the print-in-place version or the blades concentrically. There is a new “clearance” test print, you can find here…
A test cube with measurements of 20mmx20mm
News 2024-03-17: My newest whistle design, a Long Range Dog Whistle at 7,000 Hz . Please download here . News 2024-01-21: I designed an ultrasonic dog whistle with an even higher pitch of 23 kHz , which you can download here . Update…
I made this after remixing the all in one 3D printer test (/thing:3718940) because I realized I didn't want to do a full 8 hour print just to see if I was making improvements on my support settings. Print Settings Printer Brand: Creality…
This calibration test is designed to find the ideal ironing settings for achieving a smooth top surface when printing with a 3D printer. The model consists of a 10x10 array of flat cylinders. Along the X-axis, the ironing speed increases…
MODEL DETAILS This is a Halloween-themed model that is designed to stress test your 3D Printer. You won't need supports, but you will need excellent bridging! Keep an eye on this one as it's printing, there's lots that can go wrong 😉 If…
A simple bed-level test to make sure that your printer is leveled correctly !!only print one layer!!
As of February 14, 2025, the 3DBenchy model has been released into the public domain. For more details, please visit the link below: https://www.3dbenchy.com/3dbenchy-sets-sail-into-the-public-domain/ #3DBenchy is a 3D model designed by…
Easy to print - Easy to handle Perfect for openeing your boxes New model: https://www.printables.com/model/1113064-box-cutter-box-opener-v20-tested
Just when you thought that every possible way of calibrating your printer had been created, an entirely novel and unique method arrives! This isn't it, though. This claims to be neither novel nor unique, and is instead a cover version of…
Universal holder for any cordless drills and tools. I used it mainly for Makita, but other power tools should fit as well of course. The following Makita tools have been tested so far in the 40mm version: Makita DTD171 Makita DDF484…
V2 IS HERE: https://www.printables.com/model/1152427-openvessel-20-a-practical-3d-printing-benchmark Introducing OpenVessel , a model designed from scratch to embody the true spirit of 3D printing: freedom, openness, and community.…
First layer 60x60 mm square with 0.2 mm height 100x100 mm square https://www.prusaprinters.org/prints/10876-first-layer-test-100x100-mm-square Print instructions First gcode: PLA Second gcode: PETG
A low poly model for 3D-printing of Rodin's Le Poète , The poet in English, and commonly know as The Thinker . Print instructions All three models somewhat complicated prints but the easy to print one uses bridges for the worst overhangs,…
Extra tiny whistle, easily printable (ideally at a layer height of 0.2 mm) with a loop for hanging. If the whistle does not work for you, try rotating it so that the bridges inside the whistle look like this: See also: Membrane Whistle…
Economical and fast to print string test for quick iteration over different parameters that might influence stringing on your printer. Printing Parameters Print this in the layer heigth you want to use or a medium setting, something like…
This is a very simple and fast printed TPU test, that also can be used as a color-swatch/demo piece. I made two versions, circle and hex, both chamferred edges. They are meant to test how well tpu handles edges (hex), turns (circle) and…
From the well received GREATEST Towel Hooks now an improved Version 2! With improved attachment area, greater holding strength and fillet corners. Update 13/09/2025: Added versions with screw mounting holes These towel hooks are an…
🎥 Watch the video tutorial In the video, I explain: -How bridge flow and speed affect the print. -Why more flow gives smoother results. -How to tune these settings in OrcaSlicer . -How to combine this with Tree Supports → “Critical…
New, updated version of the test model are available here: For detailed prints: https://www.printables.com/model/342302-overhang-test-for-detailed-prints Regular test: https://www.printables.com/model/342481-overhang-test-regular With…
✔ For more sculpts like this, and if you are able to support my artwork, take a look at my Patreon :) Not really suitable to wear on your head, meant to be printed smaller as decoration on e.g. a shelf. - Aren't you a little short for a…
I would like to introduce to you the 5th version of my wind-up boat. After the 4th version i got a lot of feedack on Facebook, which I have implemented as well as possible. As you can see there is a much larger wind-up weel. The boat can…
Use this test tower to test for Z banding/wobble. This print aims to be simple, as quick to print as possible and and use minimal filament. Recommended print settings: 0% infill 0 top layers Z seam at rear If this model is too tall…
This is a re-design of a 20+ year old spoon rest. Unfortunately there are no labels on it, so I have no idea who designed or produced the original. I like the design and for me it's much better than any of the designs on thingiverse yet…
Note: printables.com is being very opinionated about these gcode files and won't allow most of them to be posted. Please find all the gcode files on thingiverse here: https://www.thingiverse.com/thing:4714033 . Refined Bed Leveling &…
This Combination of Several Test Print Patterns Will Save a lot of Time Tuning your Printer. You can choose between two variants: 1.) A slightly remixed version of the original model (e.g. now including a squasing test) I made for more…
Not sure if you want to pull the trigger on a mouse because you don't know if you like the shape? Well luckily this would be able to help you determine that! You can also change your infill percentages and get the same weight as the mice…
Some test files to adjust your settings to get the perfect first layer. These will print 1 layer provided you are using a 0.2 mm layer height in your slicer settings. Then inspect your print and tweak one setting at a time until you get a…
Phone holder universal 28 models. Filament need 10m (0,2mm, 2 perimeters 15% infil). For phones with (max. phone depth 21mm) and without (max. phone depth 9.8mm) cover. A, B, C, D, I, J. K. L, Q, R, S, W, X, Y ……for phones with cover. E,…
First layer 100x100 mm square with 0.2 mm height 60x60 mm square https://www.prusaprinters.org/prints/9838-first-layer-test-60x60-mm-square
Retraction test I use for filament and printer tuning
A very simple test of your first layer
The Eiffel Tower showed up with some stringing. This Test Model is intended to vary parameters Print instructions PLA Prusament 0,15 Standard Quality Mode
Dimensions Length Width Height 1:10,000 scale 160mm 103mm 56mm Version Appearances Ship Stand Imperial I-class A New Hope, Rogue One print_sw_isd_ISD_I.stl print_sw_isd_stand_ISD_I.stl Imperial II-class The Empire Strikes Back, Return Of…
Este es un test de tolerancias muy sencillo para que puedas poner a prueba tu impresora 3D. Con este test podrás ver la tolerancia nativa de tu impresora 3D. Importante: Para hacerlo, la expansión horizontal o la compensación XY tiene que…
The multi-material Prusa MMU3 test objects are useful to quickly test the reliability of the material changes during printing. These simple objects can be printed using different materials and colors, allowing users to test how well the…
I wanted to have a test print which I can use to test the dimensional accuracy of my printer and the print quality of my filaments. But it should also be pretty enough to keep as a color sample afterwards. So I created this 30x30x30 mm…
Made with meshlab and made to be printed without supports or any special settings, as a stress test for TPU printing.
🖨 Printing Layer Height: 0.15 mm Supports: Yes (recommended for best results) Materials: PLA, PETG, ABS Tips: Print the first two layers slower for better bed adhesion and cleaner details. Use a well-calibrated printer for optimal fit of…
I needed an easy way to test my support settings when it comes to actually removing the supports from your prints. Especially when they are difficult to remove. This test print is primarily for you to test the different values / results…
Introducing our newest creation: the Articulated Forest Dragon! 🐉 Embark on an enchanting adventure with our intricately designed 3D printed toy, perfect for young explorers and dragon enthusiasts alike. Now available in a convenient…
Introducing Grabby the Claw! This model is designed to use all of the main connection types that you'll find in my 3D printable action figures. It uses only a few grams of filament, and prints in about half an hour on modern printers.…
Lately, I’ve been experimenting with emergency whistles. Here’s my first attempt let me know what you think or what I could improve!
For larger screws: scale the hook up in the slicer
Very quickly slapped together Stringing Test. Markings 1cm apart so you can post-process z-height changes. Deliberatly no temperature numbers b/c they confuse when you use different temperatures (or - like me - test retract distances…
Made two new versions with a more durable tip. 2.1 New tip with wider angle 2.2 Extra edge blend added
Max flow test for bambulab slicer WARNING speeds at the top of the tower set up to 476mms (slower then bambu x1c normal travel speed) so use at your own risk but you have normally stopped the print well before this. if you change it to…
Ironing flow test for your filaments. How often the top layer that was ironed it's cracked or lines still visible ? No more failed top layers. Specially with PETG you need to fine adjust the ironing flow to achieve the best results.…
I needed a calibration model to verify my maximum print speed without sacrificing too much quality. Made a quick one and it works pretty fine in my opinion... Basically it is a cube with chamfers, sharp corners, a hemisphere and…
What makes it special Of everything I have printed and designed, this vortex passthrough still stands out to me. The design is easy, it is very functional, and it uses a low amount of filament. Print settings Infill: 0% - there is…
Because of the feedback some of you had, I made this final versions witch is better in pinching tape. As always, if you have any suggestions, just let me know !!
This adapter allows you to use Meta Quest 2 head straps on the Quest 3. Instructions: Download under ‘model files’ and print with supports. Enjoy Haydn Bao Design notes: From v4 to v5, the geometry updates are minor. There's just a few…
Easy to use Easy to print
I designed these to be printed very quickly so you can test your retraction settings without wasting a lot of time/filament.
IMPORTANT - VERSION INFORMATION This listing represent V1, the main and current version of the system. An earlier ''Early Release'' version is still included as a legacy option for users who only want a press-fit, tool-free assembly.…
This is one of the sample objects bundled with the Original Prusa SL1 3D printer designed to test whether your printer works correctly. Model by Michal Fanta, used with permission
The source marked this model as adult content.
When 3D printing, it is crucial to have a level print bed to ensure proper adhesion of the printed object. If the bed is not level, the print may fail to adhere properly and can potentially peel up during the printing process. To check if…
A simple and aesthetic backpack hanger/organizer. Designed for backpack storage but with gyroid infill at 60% and 3 wall loops held up to 9 kg (19.8 lbs). Designed mainly for a 25 mm rod, comfortably fits up to 27 mm, needs to be scaled…
With most helmet mounts, the helmet only rests on a very small area (ball), which can damage the helmet padding in the long term. That's why I designed my own holder that solves this problem. You can also hang your jacket/pants and keys…
The Benchbin is as a 3D Printing torture test designed to benchmark the quality, speed and waste of various multi-color 3D printing systems. It can be printed completely without any supports or brim, with the lid and the wheels being a…
Nearly 50% Reduced Time and Plastic Plus Separate Models for Individual Tests All-In-One From 6h57m to 4h8m 44g of material to 23g of material Separate Model Print Times Diameter Test - 32m 25mm String Test - 28m XYZ Dimension Test - 39m…
This is a tolerance test for print in place hinges. These are the same style of hinges I use in my Articulated Hexapod , Pop-up Catapult and Latching Box print in place models. Depending on the model, different levels of hinge tightness…
Lot's of nice, clever, ingenious, good looking cable organizers out there - this is not one of those. This one is simple, effective and practical. Wind the cable on your fingers (3 of 4, depending on the size of your hand) and tuck it…
I recommend printing the 3mf since it has all the models in the correct orientation. You can also scale the model to your liking. Assembly is just inserting the 2 pins in the holes and putting the top on. The side the top is facing…
Extra strong wall hook collection - 6 variations + STEP file
The Imperial Star Destroyer from Star Wars in kit card form. One of the most iconic ships in the Star Wars universe available to print and assemble. Contains 23 pieces that fit together to form this amazing ship.
IMPORTANT: This is just a model shell grip for a VR controller. NOTE: This is for the Oculus Quest 2/3 controllers. If you are looking for the Quest 1 version, see here . NOTE2: This will fit a Quest 3 controller, but it may be slightly…
Update (5/3/23): I would now recommend that people consider trying the ShortStack Remix linked in the 4/17/23 update directly below if it meets your needs. Its been used for a few weeks with decent success, and seems mostly equivalent to…
A volumetric calculation was used to determine the precise placement of the lines, as the spool diameter decreases more rapidly when it’s nearly empty than when it’s full. Three versions have been uploaded: Version Description Percentage…
I made this model for testing my retraction settings. I made a video about this on my Youtube channel: https://youtu.be/ed3zEa4WLTo Category: 3D Printing Tests
Test de velocidad con la forma del circuito de Montmeló para que podáis poner a prueba vuestras máquinas. La idea es ver a qué velocidad empieza a mostrar peores resultados nuestras máquinas. IMPORTANTE: Es importante que conozcas tu…
Any feedback would be greatly appreciated . Could be use as a planter, pen holder, etc Nozzle: 0.4-0.8mm Layer: 0.24-0.4 (Recommended) No Supports needed (Print the pipe upside down) Scale it as you like :)
Festool Guide rail holder - simplify your tool management Where do you currently store your guide rail? Print your own Festool guide rail holder and make your everyday work easier and more productive. Don't have a guide rail yet? Click…
I know that there are already similar models on thingiverse and PrusaPrinters , however, I wanted to have one where only games go in. That's why I made a completely new design by myself. The cube is slightly larger and you can directly…
I didn't design this model, it was from the Elegoo Mars 2 Pro Mono 2K resin printer USB drive. I printed this in one of my review videos, you may download it if you want to test this model on your own printer. Category: Chess
It seems like a lot of folks on reddit have questions about getting their first layer height properly calibrated. A big part of the problem I think is that the prusa first layer file only has one little square at one location. So I made…
>>> Updated to V2. more consistent channel clearance (see sketch image). 0.4 stamp is also moved to bottom now for consistency with other dimensional stamps. It's my take on tolerance test. It's a tolerance test with a taste of fidget…
I needed a way of knowing how various parts that I designed would fit together without a bunch of trial and error and wasted filament, so I designed this test. The markings on the test show the clearance in millimeters for each set of…
After the first attempt I made this one louder and easyer to print.
English below! Eine fortschrittliche Methode zur Überprüfung der Durchflussgenauigkeit Hinweis: Es ist absolut richtig, dass die STL aus 2 Teilen besteht! Bitte einfach den Anweisungen folgen. die Kurzanleitung zu dieser Vorgehensweise…
The pedestal angles the Google Home/Nest Mini (gen1 and gen2). In certain cases this improves on the sound of the speaker while also improving the microphone reception. The connector is routed inside the base and connects with the Mini…
The holster can be mirrored to fit both legs of DUMMY 13. To attach the holster, remove the hip plate and detach the leg from the body. Slide the holster through the top until flush with the thigh; then reattach the leg and finally the…
My first attempt on designing a high pitch whistle Let me know how to improve
TL;DR Ultimate Temp Tower series, brutal fast and less than 10g of material used, don't guess and hope anymore, measure the best temperature for a given printer, filament, nozzle combination. update 2023.0807 swatch cases to store the…
How To Download this model Import it into Prusa Slicer and place it in the middle of the bed. Use the same Print Setting and Filament that you want to print with. Select the Extruder that you want the test to print on. Export the .gcode…
Inspired by Basementlab’s original design. Developed independently but acknowledges their prior work: https://www.printables.com/model/1226678-wall-mount-quick-fastening-system-for-panels-and-c Tested in PLA
THE TEST DISC Simple, yet VERY effective way to dial in your Z-offset to perfection. Notice the change in the image. From right to left, as I adjust (Baby Step up/down) the z-offset. Example: I started at a z-offset = -0.98 (which felt…
Description This is THE 100, the fastest 3D Printer based on a printed frame. It does Speedboats in less than 4 minutes and is capable of doing high quality prints in 1/12th of the time a Ender 3 would need. By the time releasing, The 100…
This is to help you get that perfect first layer and determine where you need to make adjustments on your 220x220 bed. The Model is pre-offset in slicer will print perfectly aligned with 220x220 build plate. Run Brim test first to dial in…
The author's model was reduced in quality compared to the original octopus model, so I reworked the model using the original parts. I also added five additional tentacle segments because I had some extra space on the bed. Quick tip: Print…
Description: The method of measurement with my tester is similar - it also compares the tension of the belt Gates 2MGT-6 (used in 3D printers such as Prusa MK3 and Prusa MINI or similar) with the tension values recommended by the belt…
* The TINY printer test* is designed to print in minutes, so you can quickly tweak & test your printer settings and get better prints.** Just a few centimetres across, it can print in as little as 10/15 mins and includes 10+ different…
