Counting matching models…
Use case This screwdriver (bit holder) is made for fine to medium duty work. It is made to fit well into the palm of your hand, while still giving you a good grip for your fingers to apply some reasonable torque. Thanks to the clamping…
I wasn't happy with the other Onewheel prints out there because they were way too big for my hands. I scaled this one to use ¾" grip tape that I had laying around. The wheel will loosen up over time. Added another STL with a smaller wheel…
Charger port plug for Onewheel Pint. I lost mine so I modelled one myself. Tested with PLA and fits tightly. Apologies for my beat up Pint. Print instructions 0.2mm layer height. Supports from buildplate. Everything else at your discretion.
I really liked shk1d29's stand, but it would not fit on my Prusa Mini. So, I combined it with TH-Props to make an ultimate combo of the two. Identical to TH-Props's stand, but with the downward slopes to center & stabilize the board from…
My original Onewheel Pint Charger Plug occasionally moved out or fell out of the socket and seems to break into pieces soon. Thus, I needed a replacement for covering the charging socket of my OW Pint. I ended up designing two variants. A…
UPDATED 2025-05-12: I was cleaning my bicycle's cassette and pushed a little too hard, and near the tip of the tool, two teeth in from the tip, the tool broke and bent up. So, I redesigned these to have a little more material between the…
IMPORTANT NOTICE I do not keep my designs updated on printables anymore. To ensure you download the the most up-to-date models, please visit this design on my makerworld account: https://makerworld.com/en/models/20761 Thanks for your…
OneWheel GT Charge Port Plug. Printed with TPU on a Prusa mini. Has a keyring hole, too. Print Settings Rafts: No Supports: Yes Resolution: 0.2 mm Infill: 50% Filament: N/A FLEX (TPU) Notes: Generate supports but make sure you block the…
UPDATED WHEELSTAND 2.0: https://www.printables.com/model/1084250-wheelstand-20-onewheel-roller-attachment Tired of carrying your Onewheel GT through grocery stores? Roll it around like a suitcase with the Wheelstand! Includes an…
This is a bike Freewheel (not cassette) remove tool. Be aware that the Freewheel is mounted with high torque and the plastic tool may not hold up.
Update: 7/25/2024 Added GT/S variant Added M3 nut cut-outs to skid plates __________________________________________________________________________________________________________________ This design was inspired by the original remix…
GRIPPYSHEET STUDIO IS NOW AVAILABLE AT https://studio.grippysheet.com GrippySheet grip tape solution with innovative ConeControl technology /s Recommended print settings: 3 wall loops 3 top/bottom layers (2 for bottom will also work for…
Modified to for the Onewheel XR
New and improved version of my original Wheelstand . Tired of carrying your Onewheel through grocery stores? Roll it around like a suitcase with the Wheelstand! Includes an integrated kickstand. The Wheelstand can be kept on the Onewheel…
IMPORTANT NOTICE I do not keep my designs updated on printables anymore. To ensure you download the the most up-to-date models, please visit this design on my makerworld account: https://makerworld.com/en/models/20788 Thanks for your…
IMPORTANT NOTICE I do not keep my designs updated on printables anymore. To ensure you download the the most up-to-date models, please visit this design on my makerworld account: https://makerworld.com/en/models/20758 Thanks for your…
A very simple fingerboard, based on the Future motion onewheel XR. Comes with two tire profile options (slick/treaded) Printing: PLA with supports: Body A & B Tire hub PLA: Axis spacer TPU (or other flexible): Tire Profile Post…
Remixed/Re-drew the Onewheel stand that I found on here to add smooth curves to the bottom part and I also added some smooth ribs along the back side for aesthetics mostly. Works great, thanks to the original author. 200mm wide so it will…
There are plenty of fenders out there for the Onewheel XR. Call them however you want – here is my version of a mini fender. Check out my Onewheel Collection – I have also designed a mini fender for the XR with WTF rails , a mini fender…
Model of some Onewheel XR Parts that you may need for checking fitment and whatnot
This is a split fender design with the fenders made very short. I like to ride with my feet very close to the wheel so I designed these so I could easily find the edge of the platform nearest the wheel without having to look down or…
OneWheel vertical stand with extended depth for use with aftermarket, angled rails. Tested and will fit Pint or XR with TFL WTF rails. While theoretically it may work with stock straight rails, it'd lean much farther back than it would on…
It won’t save your life, but it might save your rims. Designed to fit snug over the Future Motion Onewheel XR/Pint hub rims to protect them from scratching or even breaking. Print in TPU. These are the settings I use for the Cura slicer.…
Created this car holder to more easily transport the Onewheel GT. Because of the size of the print, it may have a tendency to warp off the print bed. Be sure to have your bed temp, nozzle temps, and speed well-tuned. Hair spray on a glass…
Print your own gripples for OneWheel. Designed to be both functional and stylish, these gripples work best when printed with TPU. TPU provides the flexibility and durability needed to withstand the elements, and your feet. Add some 3M VHB…
IMPORTANT NOTICE I do not keep my designs updated on printables anymore. To ensure you download the the most up-to-date models, please visit this design on my makerworld account: https://makerworld.com/en/models/20776 Thanks for your…
These are just the pads that I own that I can confirm fit on. I made these like a year and a half ago so memory is fuzzy but I made all of them except the stock XR. If anyone remembers where that came from I can tag the OG. Otherwise have…
Onewheel XR bumpers. Credits to someone in vescify/floattown in discord
IMPORTANT NOTICE I do not keep my designs updated on printables anymore. To ensure you download the the most up-to-date models, please visit this design on my makerworld account: https://makerworld.com/en/models/20779 Thanks for your…
Wanted to make a fender with a rounded top because all fenders on the market have a flat one - and came out a fat ball. Looks nice to me, the double curvature was exactly what I wanted. Printed in PLA because I wanted something asap.If…
A stand to put your OneWheel (v1, + or + XR) on for transport. Easy to print, filament saving and durable. The design makes the stand compatible with: all available tires on the market Fenders Fender Delete all sort of bar protections You…
Call them however you want – these mini fenders have a low-profile base, so your foot placement is not hindered with this add-on-top fender. Check out my Onewheel Collection – I have also designed charging port plugs for the Pint , mini…
Mushies Footpads for Onewheel XR - VOW systems. All credits to VOW systems
Can work with 21700 18s2p configuration Lid must be CNC'ed
I originally printed the source model but didn't have a 30mm socket to use with it. I had to resort to using a adjustable crescent wrench. Unfortunately the wrench just slipped as the plastic was elongating out the open end of the wrench.…
onShape CAD version of Fungineers X7 rails done from scratch. All credits to Rick, who did a great job. Uploading with his permission X10 rails coming soon!!
This is a relatively accurate model of Onewheel pint rails I made to design other parts with. I modeled with a set of stock pint x rails. I say relatively because the rails they were modeled from were beat up pretty good so some of the…
Added crop top fenders to stock GT fender delete
FFM! VESC your onewheel now and then print this beautiful decal as a badge of victory over Kyle Doinkson.
Complete Onewheel TFL compatible drop top fender for funwheel X7 (or onewheel XR). The top fender didn't actually fit on my Bambu lab P2S. I printed it on its side on supports and used Bambu Studio to cut the ends off. It won't harm…
XLR Onewheel XR plug. Credits to someone in vescify/floattown in discord
This spacer is used to set the horizontal spacing of 21700 cells so that the height of the pack fits within a onewheel XR battery enclosure.
Rails Onewheel XR. Credits to someone in vescify/floattown in discord
If you want to change the look of your board or if it is looking worn out, you can simply print another one.
Reverse engineered and customized to fit the Onewheel Pint S (or the Pint X with Flared Footpads) from @venykrid_2240479s “Onewheel Pint X Stand”. Sits at a slight angle to keep the board stable. Includes a sturdy holder for the standard…
Nifty little corner bumper for your Onewheel GT. Print in TPU and use 3M foam double sided tape for best results. I also heated up the bottom of the print and then pressed into the rail to take better confirm to the shape, but this step…
Finger toy version of a Onewheel. Model doesn’t include text shown in photo.
Mini fenders that are compatible with TFLs droptop fender for XR. https://thefloatlife.com/products/drop-top-fender-top-only-gt Works with straight rails as is, but you can use the adapter TFL provides to make it work with non-straight…
Onewheel Pint & PintX Half Fender, printed half in rigid, half in flex, and glued together. No supports, necessary. Print in 4 parts, the bases should be printed in PLA/PETG/ETC flat surface down, and require no supports. The top parts…
If you like the model, consider buying me a cup of coffee. Donate button is on this page. Thanks!!! This is a short fender designed to fit WTF rails without a fender delete. It sits directly on the rails and slightly overlaps the footpad…
I would consider this a medium size, scale as desired for smaller or larger bonks! pictured with a BTG onewheel XR. Print in tpu, high infill is best, but if you want to save filament go for 2 bottom layers, high cubic subdivision infill,…
I made the sidewheels first… then I figured I need something to put them on :-)
Standard Battery box Onewheel XR
I didn't want to spend the $30 to buy these online and decided to make them myself. They work just as a normal fender delete would, but line up with the angles of standard GT WTF rails to look nice while still being functional. Things…
IMPORTANT NOTICE I do not keep my designs updated on printables anymore. To ensure you download the the most up-to-date models, please visit this design on my makerworld account: https://makerworld.com/en/models/20754 Thanks for your…
I really liked Asuswild's stand, but it would not fit on the bed of my Prusa MINI. I simply used Tinkercad to chop off the sides and make it fit. Works great and as a plus it uses less material. Link to original:…
There are plenty of fenders out there for the Onewheel XR, but not that many for aftermarket rails like the Floatlife Varials. Here is my version of a mini fender for WTF rails. Check out my Onewheel Collection – I have also designed a…
!OBLIGATORY WARNING! Use this at your own risk. This model has been tested on my own Pint however I cannot guarantee this will be rugged enough to sustain your own use case. Printing in materials that do not deform at low temps or…
first of all i fixed a few holes in the surface ;-) main reasone to remix it was to fit it for printers with aproximmatly 20x20 heatbed. it is a awsome stand. love it. fits perfect for pint with kush nug hi and floatplate. ac-adapter can…
Credits to jsav0 1. Remove rail next to motor connector 2. Install retainer 3. Put rail back on, apply loctite to all fasteners.
Onewheel GT WTF Rail Split Fender Delete Front and Rear models designed to fit C&R Mag Fender. For Mag Mounts you will need 1 ½ inch screws here is a link to what I bought: https://amzn.to/3n9qnYO To just mount the deletes you can use…
I made these Flightfin extenders for some people and figured I could just share the design with the world. Yes, the bottom is flat and that isn't as nice as having a curve there as well. The thing is, it is so much easier to print them…
onShape CAD version of Fungineers X10 rails done from scratch. All credits to Rick, who did a great job. Uploading with his permission
Designed to sit the stock Pint X at a 10° angle with a spot to keep the included charger. I recommend modifying this to fit other boards to make sure it fits correctly, CAD file here . The logos aren't included in the file, I recommend…
Wanted something what could easily be printed on both Mini and MK3 and didn't require half a kilo of filament and no supports. Ended up at just over 200gr and the sturdiness i required from the minimalistic design. If you want to create…
Here is a replacement gasket for your pint controller housing. Print using TPU / TPU like materials for best effect. Category: 3D Printing
For assembly you will need 33pcs of M2x6mm and 10pcs of M2x10mm screws. You will also need to cut 11 pcs of 3x41mm plastic rod. You need to mount the linkage offset to the main shaft for the paddles to have the right movement. The offset…
IMPORTANT NOTICE I do not keep my designs updated on printables anymore. To ensure you download the the most up-to-date models, please visit this design on my makerworld account: https://makerworld.com/en/models/20759 Thanks for your…
Simple, yet elegant wall mount for your'e Onewheel Pint charger. Print settings are pretty easy. 2 perimeters Infill 10% No support needed Pla, PETG or any other
Print these instead of hacking up your $65 crop top fender from Future Motion. Fits regular WTF rails only. For best results, print crosswise or diagonal in TPU.
Use 2-sided tape to secure. Printed on my Prusa Mini standing up on its edge with a brim. Make sure to orient the print so that when it's printed the bed movement is along the length of it (so it doesn't topple over). Settings: PLA+ 0.4mm…
IMPORTANT NOTICE I do not keep my designs updated on printables anymore. To ensure you download the the most up-to-date models, please visit this design on my makerworld account: https://makerworld.com/en/models/402697 Thanks for your…
Simple, slim bumpers for the corners of XR rails. Attach with 3M VHB tape. Print in your preferred material 100% infill. Printing Instructions Print in your preferred material with as much infill as you like. Print standing up, as the…
beta in progress. fitment not guaranteed 24s1p: require vow pint lid. (http://vow.systems) 2x Gallon_12CellSpacer Gallon_BOX Vow_modified_Bumper TFL Pint Floatplates (cut in half) 18s2p: Gallon_buffer Gallon_Lid 2x Gallon_18cellSpacer…
My original Onewheel Pint Charger Plug occasionally moved out or fell out of the socket and seems to break into pieces soon. Thus, I needed a replacement for covering the charging socket of my OW Pint. I ended up designing two variants. A…
IMPORTANT NOTICE I do not keep my designs updated on printables anymore. To ensure you download the the most up-to-date models, please visit this design on my makerworld account: https://makerworld.com/en/models/20755 Thanks for your…
Afraid to lose the silicone plug while charging? This is a little holder that clips to the 5.5 mm charging cable.
Credits to SheepdogShaun . The original grip was too small for me to grab. I made it a little bigger to make it easier to grab.
Here is a replacement gasket for your pint battery housing. Print using TPU / TPU like materials for best effect. Category: 3D Printing
Simple, yet elegant wall mount for your'e Onewheel Pint charger. Print settings are pretty easy. 2 perimeters Infill 10% No support needed Pla, PETG or any other
I bring you, TreezGrip! There are a couple different variations for most of the footpads available, for each board platform. If i don't have the variant you need for your specific footpad and have a dxf file I can add it to the TreezGrip…
This is a remix of (VOW ) Mushies footpads. I just added a simple channel for the footpad cable. It works with all one-wheel sensors. This is the front only if you need the rear footpad to join the Vow Discord for more files. Connect the…
These Rimmy OW rim guards were designed over the course of several months in the beginning of 2022 to address a problem Float NLC riders were having: Busting hubs from 3+ foot drops on Onewheel boards. This product was tested internally…
Two files attached, you will want to create a mirror image of each and print two of each. The GT bumper works for both stock GT rails and WTF Rails. The GT W bumper is for the middle part of the WTF rail where it is most likely to impact…
I tried some other stand on here and those were too flimsy for my taste. Tough, thick, chunky boy. Tuck away charger and cable slack. Designed to print on a Bambu 256x256mm bed. Holds the board @ 73.5º. Fits all OneWheels and FloatWheels.…
General Information These adapters provide an interface between the angled rail screw holes on the TFL XR WTF rails and a C&R magnetic mount fender or FM stock XR fender. Allows the fender to sit flatly on the rails instead of at an…
I am no longer supporting this build do to lack of time. This is a Printable Version of my GT CNC battery Box. When printing recommended to print no les then 80% infill. PLA+ or CF Increase the walls to no less then 5 for heat sinks. This…
IMPORTANT NOTICE I do not keep my designs updated on printables anymore. To ensure you download the the most up-to-date model, please visit this design on my makerworld account: https://makerworld.com/en/models/646144#profileId-572369…
“Steez” - My split fender with a nifty little hook on the end. Can use on both sides of the wheel. Print in TPU for comfort and durability, with at least 4-6 walls and a high infill to keep it from being too flexible. You will need longer…
I wanted to add the official Maghandle to my Onewheel XR (because I’m a sucker for magnets!) but couldn’t justify the price of it. £30 for the handle itself, and another £50 for the bracket needed to fit it to an XR. By the time you add…
Float plates Onewheel XR. Credits to someone in vescify/floattown in discord
You just need to drill a few holes, add brass inserts for higher durability and the screw it on top
Supports the GT motor cable from coming loose and allows for an airtag to be retained.
Bit screw driver with print-in-place freewheel that uses a 3x3mm tubular neodymium magnet to hold the bit in place. There is an option for half length and normal length bits.
This is the simple sparewheel mount for 7mm hex wheel (trx4m standard), that mounts into front sidewalls openings on the trailer. Wheel is secured by 2,5mm screw (as original trx-4m rear sparewheel) S.D.G.
Same idea as TFL's Gripples but smaller. Here's the real thing - https://thefloatlife.com/products/gripples Meant to be printed in TPU . Previously I used a long strip, but as some people noted, in theory localized pieces might be less…
Print in TPU with: .2 height random seams (helps with watertightness) bridge counterbore holes as sacrificial layer (orcaslicer) 4 bottom shell layers (helps with watertightness) 10% gyroid infill
Remix of a rim guard for a XR sized to git the GT. I don't recall where I found the XR rim STL so I'm unable to give credit where its due for the original file. Print in the given orientation with supports. Adhere to rim with 3M VHB tape.
IMPORTANT NOTICE I do not keep my designs updated on printables anymore. To ensure you download the the most up-to-date models, please visit this design on my makerworld account: https://makerworld.com/en/models/20773 Thanks for your…
