Counting matching models…
I frequently use air dusters to clean drum filters remove dust from inside PC or many other cleaning tasks in narrow corners. I liked the compact design of the WolfBox models (especially the MF50 is very handy and lightweight), but…
A box for the Wolfbox MF100 air duster and all of its accessories. Includes a notch in side of box to charge while in the box. I left it text free - emboss whatever text you might want on the lid using the slicer :) The hinges/latches…
Summary Customized attachments for the Wolfbox MF50 dust blower for individual areas of application (keyboard, notebook cooler, all types of filters, etc.) Print 0.16mm layer height 3 outer walls / perimeters 15% infill supports are…
Designed to suck only clean air. For example, from the filament package. Don't try vacuuming dust... Designed to have a firm friction fit. The firmness will depend on the printer and the filament. For the best results, cut the model and…
Slides in between the OEM mounting plate (required) and the display. Print with the front facing down so you can get a nice finish. (Will require support)
I accidentally dropped my wolfbox blower with the long nozzle attached, and managed to break one of the sliding tabs on the bottom that lock it into the base. So I grabbed some calipers and opened fusion 360 and got to work! 😆 I decided…
Wanted to mount my rear view camara for my wolf box dashcam on the outside of my car to replace my rear view mirror as it gives me a far better field of view but didn't want to leave it completely exposed, found a few designs but they…
Do you desire powerful airflow beyond your wildest dreams? Well you will need a way to contain all that raw energy. What better than a hard case - that goes just as hard? The brand new Wolfbox MF200 has arrived, a powerful apex successor…
I couldn't find an adapter for this specific mirror, so I made one. The feet are separate so that there are no supports needed. I printed with 30% infill and it seems strong enough. I printed it with pla on an Ender 3 but I would…
These inserts allow the use of Preston Innovations OffBox 36 accessories with different leg profiles on your fishing seatbox or chair. The current profiles are available. - Offbox 36 insert to 19mm square - Offbox 36 insert to 20mm square…
Flat design so it fits in my toolbox drawer. Prints well in PLA with low infill.
printed with bambu standard petg presets 30mm m3 bolts were used for the latch and the hinge
I needed a way to store my wolfbox duster laying sideways so it would fit in the tool chest. Drew this little guy up in F360 to get the job done. 4x4 base and 10U high.
A gridfinity bin to hold the MF100 air duster and all accessories!
Probably the most useless, yet loudest attachment for your air duster: just snap it on and let the deafening whistle do its thing. It doesn’t clean better – but it sure gets louder.Probably the most useless, yet loudest attachment for…
This Gridfinity storage solution is designed specifically for your MF200 Air Duster and its attachments. The 5×3 box holds the Air Duster itself. The 5×2 box is made for the nozzles and attachments. Both boxes are available in two…
I found this great template and decided to make a holder for my duster. Pretty basic but seems to work.
I printed in pla 0.3 layers i removed infill from the “front” of the “wings” so it'll be more “snappy” required atleast 1 multiconnect connector (2 recommended)
NOT an official step file, just my quick measurements. Used it to make my snap fit case: https://www.printables.com/model/1358459-wolfbox-mf50-snap-fit-case Basic nozzle included. As for other nozzles, I did not include any of the…
Let's go to holidays ! This roofbox model is printed in two parts, with supports needed. The scale is designed for all 1/43 scale car models, but can be resized to work with bigger or smaller models.
A quick easy to print holder for the WOLFBOX MF50. Sturdier then the plastic tray that comes with the electric duster.
Sometimes, dust and debris work their way into a keyboard key switch, causing the switch to be 'sticky' or to repeat key strokes. You can try to blow out the mechanism, but most blower nozzles are too big and they will not depress the…
Purchased the WOLFBOX G850 camera on Amazon but on my 2018 Buick Regal TourX Wagon (aka Opel Insignia) - there was no good spot to mount it near the back window. This PETG printed shroud has holes on the underside for common sized…
Ich habe auf Makerworld gesehen das jemand eine art Düsentriebwerk erstellt hat und habe mir gedacht hey das ist cool und mache ich auch mal. "Tja und hier ist mein Jetstream Adapter😅 " Das Teil ist sehr einfach zu Drucken und sollte…
Mount your Wolfbox MF50, inclusive accessories, on your Skadis pegboard! Using the T-Clip System by @LineArcLine. I printed it with 15% gyroid infill with the big flat face on the print bed. Support enabled for the horizontal parts. See…
As requested by a Reddit user. Work in progress!
UPDATE 3/16/25: I found that the added weight of using the extension arm causes the mirror to rotate forward at the location where the extension arm and the OEM arm kit attach. To remedy this, I have added two new parts, the “Mirror droop…
Store your MF50 fan in a personalized case. INSERT piece needs to be printed in PETG for snap flexibility. All printed supportless, with an insert designed to press fit into the case (0.1mm clearance). Magnet holes are for 5x5, but STEP…
This is a simple model to allow a ball mount adapter to be attached to the OEM mounting bracket of a Wolfbox G900 dashcam. My camera is a G900 Tripro, but this adapter will work for anything that has a 30mm x 30mm hole pattern on the…
This provides a place to store your Wolfbox electric air duster, all the nozzles and the two brushes. There is a cutout with access to the USB port allowing charging.
Simple case to store the Wolfbox MF50 blower, the lid is optional, you can put whatever gridfinity box on top instead. The simple pull over clamp might be adjusted in size to work with the material shrinkage you have, just adjust in the…
This is a custom mount designed for installing a Wolfbox in the Ineos Grenadier. When mounting the Wolfbox on the original Rear-view mirror, the cables have insufficient space and the overall setup appears bulky. To solve this issue, this…
Material: main part with PLA or ideally PETG lid with TPU or other flex material Don't judge my rolled cigarette in the photo, this one didn't came good :D [DONATIONS] If you find this thing good and useful, consider supporting my work by…
This model gives you the basic locking mechanism for nozzles. Attachments snap in place with a small twist, so you can easily build and adapt your own custom designs.
This is a modified lid insert that removes some parts to make room for the strap that comes with the air duster.
I purchased both the NiteCORE CW20 and the WolfBOX MF100. The NiteCORE quality is leaps and bounds better although slightly less powerful / cfm. I modeled the 12mm tip after the WolfBOX and still wasn't as happy, so I remixed the 10.5mm…
I designed a replacement 3D printed nozzle for a friend who has a WolfBox air blower and came up with the idea that it would be easy to convert a nozzle into a whistle so I created this attachment. I used supports just for along the outer…
The one in the photo is the first version of nozzle where I had to add some glue on the mating surface to build up thickness -- otherwise it wasn't locking good enough. Since then I increased thickness of locking tabs from 1.5 mm to 1.75…
This mount just slips up behind the headliner. It allows you to mount a wolfbox rear camera inside the rear window. The short mount is used on either side of the sliding rear window. The long mount can be used anywhere, including over the…
Fairly accurate not official model made from my own measurements and testing of the real model. All components included: Main body front / back attachment rings grip pads left and right power / fan control / battery release buttons…
This is a custom 3D-printed mount for attaching the rear Wolfbox camera to the back of my GFC. It’s printed in Protopasta HTPLA Carbon Fiber with 4 walls and 10% infill. The camera is attached with 3M automotive double-sided tape. The…
Simple Honeycomb holder for the Wolfbox MF100 and its its attachments.
This stand is designed to let your MF200 stand upright in a stable and tidy way. It's especially useful if you want to keep the device ready to use on your desk or workbench without it rolling around or taking up unnecessary space.…
WOLFBOX MF100 mount for Multiboard. Use Auto Tree supports from plate. Attach with 9 mm Small Thread, Flat Head, T-Bolt
This honeycomb holder is designed to keep your MF200 and its nozzles organized. The Air Duster holder provides a stable slot to store the device upright. The nozzle holder features five slots where the attachments can be placed side by…
Quick remix to make unit easier to remove, no lettering, and 6x3mm magnets.
Just in case you're tired of printing useful things, here's something slightly pointless. A nozzle for the Wolfbox MF100 blower (as seen on Project Farm youtube channel; video1 and video2 - and others!) that replaces the mouthpiece for…
I created a stand for my Wolfbox MF50 + accessory nozzles to sit on my workbench for easy access. It includes an integrated channel in the bottom which provides airflow to the vent on the bottom of the unit. The charger port is uncovered…
Covers the camera for a Woldbox digital rear view camera. Printed in PETG or ASA, with the gasket in flex or TPU.
Made my own version of gridfinity storage for the Wolfbox MF50 in a 4 by 1 gridfinity grid to save on the used area andi improve grabability. This fits perfectly in the deep Ikea Alex drawers.
Print with the front side down, requires minimal supports.
Tried making even more powerful nozzle for wolfbox mf200. Few iterations and this one was best as some some millimeter changes between nozzle and venturi inlet made huge difference how much it whistled on the highest power. Didn't try…
Made a holder for my MF50 to mount it on Multiboard. Recommend using 2 multiconnect connectors, but 1 could work too.
A minimal footprint gridfinity bin (4x2) that can hold the MF60 or MF70 WolfBox Air Duster. I wanted a model where the duster could hold any attachment, and all attachments are accessible. Not recommended for a shallow drawer. The modal…
Shelf to store the Wolfbox air duster on the Honeycomb storage wall.
It's a push fit, not a snap. Quick and dirty remix, so some post processing may be necessary to get it to fit in the holes.
Print it as you prefer, I just recommend a brim as the design may be prone to warping. Higher infill will help in rollover accidents. I printed mine in PETG 60% infill.
Based on FgS36's clever snuffbox, I've added 45 degree chamfers to the drawer, the snuff chamber, the chute and the flue to allow printing without supports. Your printer must be able to handle 45 degree slopes and create small bridges. So…
Simple Honeycomb holder for the Wolfbox MF100.
Print with supports. Adjust XY Size Compensation/Horizontal Expansion for a looser fit.
Simple mount I designed to hold the MF50 under my desk. Can be mounted to hold vertically or horizontally and can also be mirrored in slicing software to reorient. Should be no problem to wall mount as well.
Used for wolfbox mf50 to hold nozzles on skadis board Print with supports! I used 100% infill, 0.2mm, with grid style supports, takes about 2 hour on mk3s
This model represents the Wolfbox MF200 Air Duster and is meant as a reference for creating your own holders, mounts, or accessories. It helps you save time by avoiding manual measurements simply align your design to the model. Two…
This project includes two Multiboard attachments designed for the MF50 Wolfbox tool : A holder for the MF50 Wolfbox device itself A separate holder for up to 4 nozzles
A Gridfinity 1x2 holer for Wolfbox MF100. I did use reference from other Author
To fit into an l-boxx mini, I made a gridfinity bin that fits the Wolfbox MF50 air duster.
Caution, this can obviously break your tool if you attempt to vacuum objects with it. I made this mostly for laughs, but it could be useful to suck air out of bags before sealing, or maybe vacuuming if someone were able to come up with a…
Just a case to store your MF50 with its acessories
This mount is for a Wolfbox upgraded rear view camera ( https://www.amazon.com/dp/B0B1LLMCS9 and https://www.amazon.com/dp/B09KRM9QQ5 ). It mounts under the 3rd brake light on a 5th Gen 4Runner (2018). I would suggest using ABS. I also…
One of the plastic thumb turn nuts on my Farad roofbox broke but the nut was still useable so I created a new plastic holder for it. The nut I designed it for is an M8 nut. I printed in PETG with a brim and support from the base plate.
I used 2 m2x8 bolts and nuts to secure the camera inside this mount. This should make lining up a trailer simple
Mount to the wall with countersunk screws. Done!
Replacement nozzle for the Wolfbox MF-100 that dries a bike chain quickly. Fits 11 or 12 speed chains. Might be tight on lower speed chains. To use: install it on your blower power on the blower put the nozzle on the chain so that the…
Remix of @ripley’s Honeycomb Storage Wall – Wolfbox Air Duster Storage to fit the GOEWS mounting system. This GOEWS Wolfbox MF100 Holder keeps the same form-fitting cradle for the Wolfbox MF100 air duster but swaps in 2x vertical GOEWS…
This is a handy holder for the WolfBox MF200 air duster. The model comes with 3.5mm screw holes to attach the holder to a shelf/workbench so that you can store the air duster out of the way Printed with 20% infill, PLA, 0.2 layer height.…
Holder for the Wolfbox MF50, design to fit IKEA SKADIS. Print with supports for the hooks. I used 15 % infill with 3 walls
Insert for the OctoPlus leg system on fishing tackle boxes. Used to expand the octoplus leg system with bait trays, rod rests and anything else that uses the octagonal legs. added a v2 version with additional slots to allow it to move…
2x1 Gridfinity Magnets are 2x6mm. Pressure fit or glue in models included
This is an adapter for a Wolfbox Mirror Dash Cam to work with an OEM bracket adapter for my 2020 Mazda CX-5. It lowers the mirror dash cam so the plugs at the top of the mirror don't interfere with the car's headliner. Originally designed…
Halter WOLFBOX MegaFlow 50 Electric Air Duster. Siehe: https://link.amazon/B0h1RGwZn * * Bei den Links oben handelt es sich um Affiliate-Links. Das heißt: Klickst du drauf und kaufst was, supportest du mich mit einer kleinen Provision,…
I used this with the Threadboard system so I can add it to my butcher blocks, close to my printers. I noticed when making it and testing, some attachments are bigger than others. This makes it difficult to get all the slots to fit…
Print the mounts. Print 3x universal attachment. Voila.
Wolfbox MegaFlow 50 (MF50) Honeycomb Storage Wall Holder Mount your Wolfbox MegaFlow 50 and accessories to your Honeycomb Storage Wall. Print Settings 0.2mm layer height 15% infill (could probably get away with less)
Nozzle for Wolfbox MF100 for sucking air instead of blowing it. Tip of the nozzle fits most shisha/hookah hoses. Usable for starting the shishas or pulling other fumes out. You will need some rubber bands to attach it to Wolfbox! Tested…
Multiboard mount for the Wolfbox MF200 and nozzles. Print orientation; as is Print with supports.
You can use this on your own, or with the attachments included on this model page: https://www.printables.com/model/1357249-wolfbox-mf100-attachements-threadboard-mount. If you use this, READ BELOW: This mount requires a very specific…
Thanks to @PrintingPerspective for the great original model. by @CriptasticHacker https://cripsrise.neocities.org/ Please leave a ♥ if this helps you :) The MF50 is perfect for suction adapters given its hex shaped plastic body.…
I remixed the excelent model of @Filamentalist. I suppressed the honeycomb part and added a Skadis hook. Print advises: 3 perimeters Print in PETG Supports recommended
Venturi nozzle for Wolfbox MF200 exchanging high-pressure stream for one with higher volume. Please consider this more as an experiment.
The WOLFBOX MF50 Compressed Air Duster is a best-selling (#1 on Amazon) fan-powered air duster. It's a great product; compact, rechargeable, and surprisingly powerful. This product gives you a super handy "holster" that lets you mount the…
I expect this should print pretty well with any filament with default settings. no supports or brim required. I've printed this in generic PLA and PETG and it always has a nice friction fit.
Replacement for the part that nozzles snap into. If you want to print upside down for a better surface on the visible side you will have to file down the little notches that keep the nozzle in place. This is my first CAD model since high…
Currently the slots in the back are sized for some random HDD magnets that I had around. The step file is included, so feel free to add wall mounting holes, a hook or whatever you need :)
This bin is designed to hold the blower as well as 3 additional nozzles. The blower typically ships with 4 nozzles in total, but it's assumed that one nozzle will always be attached to the blower. The bin is modeled with holes for 6x2…
After mounting the mirror using this backet for Mercedes Sprinter ( https://a.co/d/06l5MwLM )and the Wolfbox bracket ( https://a.co/d/071Q7swu ), the mirror wasn't seating at a good angle and the view was partially blocked by the…
Printed in ABS @0.3mm layer height, 4 wall loops, 25% infill. Held in place by two screws in the front and two zip ties in the back. The camera is stuck in place by the double sided tape provided by Wolfbox See screenshot for printing…
Halterung für einen Leim Pinsel/Spachtel für das Gridfinity System
ReadMe.txt Gehaeuse Pruefbox Anwendung: Dieses Gehäuse dient der Aufnahme einer bestückten Leiterplatte mit Taster und LED. Es hat eine Öffnung als Kabeleinführung. Die Leiterplatte kann mit PT-Schrauben (Schraube für Thermoplastische…
Made these label holders because i couldn't find any suitable for cloth boxes. Used them for the below listed boxes in an Ikea Billy shelf. Dimensions of the Boxes: 24x24x24cm Dimensions of the Label: 48x20mm Width of the hanger: ~28mm…
