Counting matching models…
🌀 Fidget Spinner with Planetary Gearbox (Double Helical Gears) Description: A stylish fidget spinner combined with a functional planetary gear system. It features six planet gears rotating around a central sun gear, all enclosed in a ring…
Print approx. €1.53–€1.87 excl. taxPreliminary estimate for PETGSource material: PET
Welcome to GlennovitS3D. Join the Club on Printables.com to support creation of new models , get access to exclusive models , and get commercial rights, to sell prints. Join today - GlennovitS3D - or check out my model collection or my…
Print approx. €1.26–€1.54 excl. taxPreliminary estimate for one variant
Turn off arachne mode! Discover the Triangle Fidget Toy , a mesmerizing gadget designed for endless fun and relaxation. With its unique triangular design, this toy stays intact while allowing creative play in both 2D on a flat surface or…
Print approx. €0.84–€1.03 excl. taxPreliminary estimate for one variant
Each variant is optimized with dedicated print profiles to suit different filament types: Basic filament for standard materials. (PLA Basic) Matte and silk filament to accommodate the increased friction of these materials, ensuring smooth…
Print approx. €0.23–€0.28 excl. taxPreliminary estimate for one variant
This is a Herringbone Planetary gear fidget to keep your hands busy. With a 3/1 reduction can also be used to demonstrate planetary gear reduction. (The ornate option is great for this demonstration) The design incorporates herringbone…
Print approx. €9.94–€12.15 excl. taxPreliminary estimate for one variant
Relaxation ring with a gear wheel, print in place If the ring is difficult to fit, run it under water, push it to twist in all directions, it helped me a lot In g-code, a collar is set around so that the model does not come off - I…
Print approx. €0.77–€0.94 excl. taxPreliminary estimate for one variant
💕 Valentine Heart-Love is in the air! 💕 Imagine a heart made of two parts that twist elegantly into a spiral – yes, you simply twist it together! This creates a magical vortex effect , making the heart an unforgettable design. Perfect for…
I've long been a big fan of the Keycappie by Romly, a great little figure that can house a an MX compatible mechanical keyboard switch right in his head. They're so cute that I couldn't resist the temptation to make one of my own. I'm not…
Print approx. €0.71–€0.87 excl. taxPreliminary estimate for one variant
Nested hearts print in place with no supports for a rotating fidget toy or hanging decoration. Choose with or without a loop for hanging. You can also pop the hearts out and replace them with different colors, by squeezing the outer heart…
Print approx. €0.20–€0.24 excl. taxPreliminary estimate for one variant
Description: Elevate your fidget game with a 3D printable Folding Karambit Knife Fidget Toy! This unique creation seamlessly combines a sleek design inspired by a CRKT style folding Knife with the satisfying functionality of a fidget toy.…
Print approx. €0.08–€0.09 excl. taxPreliminary estimate for one variant
A more ergonomic version of SmileyPrinter's TikTok bolt-action fidget toy. There's a version with and without speed holes. Requires 7 6mm x 3mm circular neodymium magnets (ex https://www.amazon.com/gp/product/B096LZNZTQ). Included…
Print approx. €0.90–€1.10 excl. taxPreliminary estimate for one variant
Introducing the Hexagon Fidget Toy , a captivating geometric gadget designed for endless fun and relaxation. This unique 3D printed toy is versatile and interactive—play with it on your desk in 2D mode or explore its dynamic movements in…
Print approx. €1.35–€1.64 excl. taxPreliminary estimate for one variant
A Small Print in Place Slider Fidget, which takes only 13 Minutes to print. If it doesent work right off the Plate, put some force into sliding it and it should come loose. No AI was used in the making of this model.
Print approx. €0.25–€0.30 excl. taxPreliminary estimate for one variant
Minimal distance tolerance gauge. How low can your printer go? The distance between the rings is getting smaller by 0.1mm towards the center starting with 0.5mm, ending with 0.1mm. Each ring is marked by a number marking the size of the…
Print approx. €5.39–€6.59 excl. taxPreliminary estimate for one variant
I wondered what a space filling curve might feel like to play with, so I made this. Even though it kind of looks like a space filling block, it is indeed just a single curve looped in on itself and thus can be printed in spiralized vase…
Print approx. €0.81–€0.99 excl. taxPreliminary estimate for one variant
I needed a toy for my son for when I'm playing on my PS5 so he can “join”, without endangering my real controllers, so I designed this easily printable little controller toy. Just look at this happy customer: Attention and disclaimer: If…
Print approx. €4.64–€5.67 excl. taxPreliminary estimate for one variant
I was experimenting with snowflakes in spiralized vase mode and came up with this flexible snowflake fidget. One surprising feature is that the fidget can be inverted to make a different interesting snowflake. It is printed with Prusament…
Print approx. €0.19–€0.24 excl. taxPreliminary estimate for one variant
This is a remix of Print-in-Place Fidget Toggle Switch, but with "Click!" text, because I didn't want it to be blank.
Print approx. €0.66–€0.81 excl. taxPreliminary estimate for one variant
An infinity cube concept with a different approach to the way the connector joints work, using an easy-to-print snap together design. My goal was to design a version that wouldn't have the issue with the unsupported first layer of the…
Print approx. €4.30–€5.25 excl. taxPreliminary estimate for one variant
I found TomoDesign's Joy Fidget earlier today, printed one out and thought I'd try remixing it to fix a couple issues I had. First off, its a great model! Simple printing, easy assembly, novel design on the spiral spring and fun to play…
Print approx. €0.87–€1.06 excl. taxPreliminary estimate for one variant
Printed with filaments from Prusament ColorMix bundle: Prusament PLA ColorMix Cyan Prusament PLA ColorMix Magenta Prusament PLA ColorMix Yellow The darker version uses these: Prusament PLA Azure Blue Prusament PLA Galaxy Red 1kg Prusament…
Print approx. €10.35–€12.66 excl. taxPreliminary estimate for one variant
💕 Small Valentine Heart – Elegance in Miniature! 💕 Imagine a heart made of two parts that twist elegantly into a spiral – yes, you simply twist it together! This creates a magical vortex effect, making this new small version an small…
Print approx. €0.64–€0.78 excl. taxPreliminary estimate for one variant
A striking oversized hexagon fidget toy designed to fill the entire print bed of a standard 256×256 mm printer. 🔷 Can be flipped, rotated, spun, or simply used as a visually satisfying desk piece 🌀 Smooth geometric surfaces create a…
This is a squishy fidjet toy made from 24 oval plates clamped together. If you're looking for a smaller one: https://www.printables.com/model/1176641-squish-fidget All necessary parts even fit on a prusa mini . For the assembly of the…
Print approx. €1.32–€1.61 excl. taxPreliminary estimate for one variant
Stackable Print-in-place planetary gears with two different sized links. Stack and connect the sun and planet gears to each other in any way you like. Depending on your printer's tolerances, the gears might run loose or tight. As a guide,…
Print approx. €4.44–€5.43 excl. taxPreliminary estimate for one variant
Showcasing the magic of 3D printing, the Impossible Pyramid Fidget features a perfectly captured sphere inside a geometric pyramid. This intriguing design is available in both monochrome and dual-color versions, adding an extra layer of…
Print approx. €0.80–€0.97 excl. taxPreliminary estimate for one variant
A dual-action fidget toy combining a clickable switch and a hexagon spiral for ultimate sensory engagement! 🌀🔘 Use arachne mode! No brim or supports required. Reduce speed if having problems. ✅ Satisfying Switch Clicker – Flip the switch…
Print approx. €0.69–€0.84 excl. taxPreliminary estimate for one variant
This is a variant of the Gosper curve which forms a closed loop. Inspired by an idea shared by @Ema that used a different subset of this curve, I wanted to investigate what the space filling hexagon looks like inverted. Multiple copies…
Print approx. €0.70–€0.85 excl. taxPreliminary estimate for one variant
Printing Instructions/Recommendations 50% gryoid infill provides weight and strength so it can move through with just gravity 0.2mm layer height PLA for good finish Offset is around 0.4mm between objects - will not scale down well Print…
Print approx. €1.45–€1.77 excl. taxPreliminary estimate for one variant
UPDATE: 3mf fixed. Sorry for the not working box :(( Do you have someone you love who rolls their eyes at 3D printing? Then give them this! It's a fully* print-in-place heart-shaped gift box with 5 print-in-place chocolate-themed fidget…
Print approx. €0.06–€0.08 excl. taxPreliminary estimate for PETGSource material: PET
For best results, print each piece in a different color. Higher infill will create heavier parts that will passthrough each other better. Works fine at 5% as well. No Support Needed!
Print approx. €4.05–€4.95 excl. taxPreliminary estimate for one variant
Modification to be able to use your Itty Bitty Fidget from 3D Printy as a keychain. You only have to replace the original top part with mine, download the other parts of the fidget from the original model post . Thanks to 3D Printy for…
Print approx. €0.11–€0.14 excl. taxPreliminary estimate for one variant
This fidget is based of a tiling of the plane by Koch snowflakes. Part of the reason for making this was to see what the Koch snowflake looked like when it was inverted. It is printed with Prusament PLA in spiralized vase mode. I set the…
Print approx. €0.62–€0.76 excl. taxPreliminary estimate for one variant
Get in the holiday spirit and set the table with these fun coaster fidgets. You can also hang them on the holiday tree if you run a string through the infill mesh. That is if your printer can handle it, the tolerance between the rings is…
Print approx. €0.20–€0.24 excl. taxPreliminary estimate for one variant
After playing with Kobayashi cube on one party I had to model one. You have to assemble this one and it needs supports on build plate only which are easily removable. Connector1 and Connector2 shaft and hole are same dimension. I have…
Print approx. €3.46–€4.23 excl. taxPreliminary estimate for PETGSource material: PET
Explore the capabilities of 3D printing with the Impossible Fidget Cube ! This 30 mm cube features a sphere "trapped" inside, offering both a visually stunning and fun-to-play-with design. Available in single-color or dual-color…
Print approx. €0.74–€0.90 excl. taxPreliminary estimate for one variant
A twist-style fidget toy inspired by the shape of a garlic bulb. The segmented design allows the model to expand and twist into a dynamic spiral form, creating a satisfying transformation between a compact decorative object and an…
Print approx. €8.74–€10.68 excl. taxPreliminary estimate for one variant
A triple-action fidget toy that combines three hexagon fidgets into one satisfying, shakeable, and stackable piece! 🌀✨ Use arachne mode! No brim or supports required. Reduce speed if having problems. ✅ Three Hexagons in One – More…
Print approx. €0.62–€0.75 excl. taxPreliminary estimate for one variant
Based on measurements of an actual Life Savers (Peppermint) candy, I modeled this, split it, and added internal pockets for 6x2mm neodymium magnets, six per half. The text isn't perfectly matched to the actual candy, 'cus Fusion spacing…
This is not only a lucky charm, but also a fidget toy. I have loaded the .step file in addition to the .stl file, so that everyone can write their own private message. I also intentionally left out the year, so it can be used for multiple…
Print approx. €0.96–€1.17 excl. taxPreliminary estimate for one variant
A flexible chainmail-style fidget fabric made from interconnected moving links. Designed to bend, fold, shake, and flow freely in your hands, creating a satisfying tactile and kinetic experience. The interconnected structure allows smooth…
Print approx. €2.10–€2.57 excl. taxPreliminary estimate for one variant
Quietly Clicky. Fits & Fun. Bit Easier to Rotate. Bearing 608 x1 Magnet 3Φx2mm x24 Tested with 0.2mm & 0.15mm layer height. Magnet poles can be aligned towards center or altered one by one. I prefer altered. Push magnets all the way in.…
Ein kleiner Fidget Spinner PRINT IN PLACE wird ohne Stützen funktionsfertig gedruckt. Nach dem Druck sind noch je zwei 1 Cent Stücke (€ Cent) in die Taschen der Ausleger zu pressen bis sie unterhalb der Rasten sitzen. Jetzt empfiehlt sich…
Print approx. €0.60–€0.73 excl. taxPreliminary estimate for one variant
This fidget is smaller than my similar larger fidget. This one fits more easily in your pocket. Carry several in your pocket and pass them to friends or anyone you meet. It compresses with your finger or thumb and returns to the extended…
I legit went and bought a pack of Nutter Butter cookies to design this fidget. Not that I needed an excuse to get them, of course. ;-) I traced the design from a photograph I took of an actual cookie, so the dimensions are pretty much…
Print approx. €2.24–€2.74 excl. taxPreliminary estimate for one variant
This maglev fidget uses the opposing force between two magnets to respond when the end buttons are pressed inwards. Requires two magnets approximately 15 mm to 18 mm diameter and 2 mm to 3 mm in thickness. The .3mf and/or .bgode files can…
Print approx. €0.29–€0.35 excl. taxPreliminary estimate for one variant
I've made a few fidgets designed by others, but never tried designing one before. This is my first attempt and is perhaps a bit overengineered. But it meets my design goals: easy to operate, fast and easy to print, no support needed, and…
Print approx. €0.27–€0.34 excl. taxPreliminary estimate for PETGSource material: PET
i made this big nozzle it is a fidget nozzle it is fun to play with.
Print approx. €1.75–€2.14 excl. taxPreliminary estimate for one variant
Recently I have been fascinated by screws in fusion 360 so I tried designing my own and had the idea to isolate the movements and that's what I did, you will need to assemble the pen yourself as it is not print in place, first connect the…
Print approx. €0.51–€0.62 excl. taxPreliminary estimate for one variant
🥚 Introduction How does Gyro celebrate Easter? By replacing his regular steel ball with a steel egg ! For printing, there are two options: The full rotating fidget (four printed parts plus bearing and weights) A plain egg , just for…
Print approx. €8.55–€10.45 excl. taxPreliminary estimate for one variant
its a mini swivel punching bag not much to it all you have to do is put the main stick through the plate you can tape it if you want then put the smaller stick through the hole in the bigger one then place the swivel part that you hit on…
Print approx. €1.09–€1.33 excl. taxPreliminary estimate for one variant
A fidget spinner for your Tildagon. What more could you want to plug in?
Print approx. €1.13–€1.38 excl. taxPreliminary estimate for one variant
Buy a printed fidget cube from me directly: AustinMakes.etsy.com An addictive fidget toy that you won't be able to set down! Prints in one piece and works right off the print bed. Note: vertical hinges will be stiffest after printing, but…
mproved version, very smooth movement. Super relaxing effect, fight your anxiety! In order to successfully print this m
I decided to modify my previous model (5 in 1) Fidget Toy Spinner I wanted to get rid of the bearing and make the whole fidget smaller to fit the keys well. And as a bonus, I modified the model for print in place. So just print and click…
Create your own OTF (Out-The-Front) fidget knife with just three 3D printed parts! This compact design is perfect for restless hands, providing smooth OTF action for endless fidgeting fun. Watch my YouTube video for assembly instructions…
I was messing around with a twisty fidget egg and the next logical step was clearly a twisty fidget dragon egg. I am no good with blender, and found the awesome solid dragon egg modeled by Tony Youngblood here: At that point it was just a…
superbe pour le boulot comme pour les enfants .Au telephone il permet d'aerer les mais ,superbe objet .N'oubliez pas de liker et de poster vos fabrications . Reuploaded model: https://www.thingiverse.com/thing:4804260/files
Check out My 2.0 Version of this design! Joy Fidget 2.0 A simple and easy-to-print fidget toy! That looks like a little joystick. Perfect to test your printer or just as a fidget on your desk. It makes use of a spring gear that will bring…
Taking inspiration from my original fidget toggle switch , I designed a print-in-place version that uses about 8 grams of filament and takes about 20 minutes to print on my X1C. This model is experimental (it's definitely still a…
I saw some of the popular spiral passthrough fidget toys and got inspired to recreate one as a learning experience. This model is my take on the spiral fidget cone, and I think it actually turned out really well! This 3D model is licensed…
Want the same results? Click here to find the filament I use for results like these. This model is inspired by TomoDesign's stretch fidget but as you can see it is all my own design, so I have not done it as a remix. I have added seven…
This toy is designed you get a click feeling sensation when you rotate the wheel. Slim body for cool appearance and good click feel! What is Fidget toy?: A fidget toy is typically a small object used for pleasant but purposeless activity…
This is probably my best fidget toy! I printed dozens of them because people wanted them. Edit: Meanwhile I have a bunch of different fidget gear ring designs. EDIT: I reuploaded these as 3mf with parts for easy coloring ; changing color…
Welcome to GlennovitS3D. Join the Club on Printables.com to support creation of new models , get access to exclusive models , and get commercial rights, to sell prints. Join today - GlennovitS3D - or check out my model collection or my…
I designed this to expand on the “rings inside of rings” idea, and it gives this fidget a really interesting look and feel. It took six iterations to tune the tolerances, but the final version works great! Just give the model a few spins…
Two versions are included: Textured gears Smooth gears Fully print-in-place – no assembly required. Also available with keychain holes. Tip: When removing the plate from the print bed, flex it gently. Pulling too hard may damage the…
A compact and satisfying G26-style fidget keychain featuring a smooth, functional sliding top. Designed for stress relief, display, or everyday carry, this mini model keeps the iconic look while staying completely safe, non-functional,…
A fun fidget to take with you on the go! Print in .2mm resolution, and you may need to slow down your first layer for the best adhesion. If you like this model, consider checking out my latest fidget design here:…
I needed to model something in Creo as part of an additive manufacturing class. So I decided to blow everyone else's models out of the water with my fully print-in-place planetary gear toy. I spent a grand total of 4 days researching gear…
Heres a link to the CAD if you'd like to adjust tolerances or remix.
Gear helical fidget model New!!! I also added the size of the model 125%, that's the model I'm holding in my hand, for those with big hands or who want a more detailed model Update!!! I continue with the experiments and enlarged the model…
If you are stressed, this is what you need ! Well even if you're not, you need it too haha The Fidget Flower ! A really cool Fidgettoy to have in your hands And of course it prints perfectly without supports Try it! IMPORTANT : If you…
Print, assemble and play directly, no screws needed 8-11
Have fun with this fidget ring! I uploaded many sizes (inner diameter in mm from 12.3mm for kids to 24mm for big fingers, please use the conversion table below in case you are used to your local ring sizes and use the closest value in…
Motor Fidget A smooth, print-in-place motor fidget designed for endless spinning satisfaction. No assembly required — just remove the small support block after printing and start spinning! Perfect for relaxation, focus, or keeping your…
Large and Small Heart Layered Fidgets 3D PRINTING SETTINGS Layer Height 0.2mm PLA works great 15-20% Infill Dimensions of Large Heart Layered Fidget: 4in x 4in x 7/8in Dimensions of Small Heart Layered Fidget: 2 3/8in. X 2 3/8in. X 7/8in.…
Triple gear helix spinner Complette spiners collection : https://www.printables.com/@ThorinOakenshield/collections/388544 I made a remix of the favorite double gear spinner https://www.printables.com/cs/model/345965-gear-spinner In the…
Based on a popular model seen on TikTok, this fidget toy's files have been very difficult to find. So, I made it myself. Included in the files are a short, 30mm bladed version similar to the ones seen on TikTok, as well as a longer 50mm…
As requested the twist ball fidget available for everyone to download free Features a choice of 2 sensory twist ball fidgets, the low poly version or the soft point version, simply choose your favourite and print The sensory twist ball is…
This fidget toy is a tiny, clicky toggle switch! It's fully printable in about an hour and is only four pieces. You can change the "snap" effect by using either spring option and/or different materials. Want to sell prints of this model?…
FYI if you scale the model down it will not fit together Collection of Interlocking fidget toys, Square, Cone, Hourglass, Ball I like to print PT1 in matte and PT2 in silk, it really makes it looks great!
See it before you print it Preview3D opens 3D models and G-code the way Quick Look opens a PDF -on a Mac, an iPad, an iPhone and Apple Vision Pro. Point your camera at the code and this Gear Shift Fidget assembled stands on your own table…
Gardening just got fun with this cute little carrot patch 🥕🥕 Plant it on your desk, coffee table or anywhere else that needs a little touch of spring. I have included the following digital files: (1) Big Carrot (2) Small Carrot (3) Bed of…
I've made a couple of designs based on this idea before, but I realized that more segments = more fun, so now there's 35 😂 This design twists, expands, and collapses in a really neat way, and the segments can actually be separated and…
This posable articulated snowman makes for a festive fidget toy. https://youtu.be/h_6IVLau064 https://youtu.be/S00Uxp5Etow Printing All parts can be printed without supports. Several parts (particularly Chest.stl) have very minimal…
Use normal supports on build plate only. A compact twisty sensory fidget sphere with a spiky textured surface. The sphere is built from rotating segments that can slide and twist along the central axis, creating a satisfying mechanical…
Since a variant of my fidget gear rings with knurling on the inside was occasionally requested, I made this one with diamond knurling outside and inside. It is available in 4 ‘odd’ sizes: 15mm, 17mm, 19mm and 21mm inside diameter. Also…
Design This fidget has similar characteristics to a butterfly knife, but in a simple, smooth, and forgiving package. It's designed to print in place with zero supports, and has two weight options depending on how “slingey” you want it to…
if parts are sticking download the efc version, i modeled in elephant foot compensation and looser tolerances. The Alpha Fidget is a 5 in 1 print in place fidget toy perfect for all ages Pocketable and easily add it to your everyday carry…
Simple to print, 100% print in place with no brim or support needed, just print & play Brand new inner core that's strong and simple Works great with most filaments including silk! My newest twist fidget with more surprises on the way…
⭐ Fidget Star with Handle — A Tactile Fidget You’ll Keep Coming Back To This isn’t one of those fidgets you use once and forget about. The moment you pick it up, the shape just feels right — the edges give your fingers something…
I've been inspired by a few of these kind of designs recently, and I wanted to try it out myself. I designed a standard version first before abandoning all sanity and making one with 20 segments 😂 The small version is really fun to play…
Designed to be compatible with Cherry MX style key switches. Just add one of those, a key cap, and a lanyard. It's recommended to use XDA form factor key caps, but others should work also! The only overhangs are inside the hole where the…
Fidget toy mashup of the “Print-in-Place Fidget Ring” by Makkuro, and the “Cute Mini Octopus” by McGybeer. The inner ring spins, with articulated tentacles attached to the outer ring. Updated V3 - Improved fit of inner ring, and flusher…
Insert the axles into the central gear, add both parts of the cage with the outer gears and stick the knobs on the axles. I recommend printing the cages with 3 perimeters to make them stronger The tolerances of parts and wheels are good,…
Skull Key Switch Fidget Toy Simple fidget toy that is quickly printed and easily assembled. Choose the print bed with the emote you like in the .3mf project and print! No supports needed! Printed in approx. 30 minutes! Assembly For the…
CLICKER COIN V2 NOW LIVE: UPDATE 8/8/25: Made a change to the clicker that makes the wheel spin smoother in both directions. Added a display stand model. This is a 4 part fidget toy designed to print quickly and easily. It has a…
Print Settings Printer brand: Creality Printer: Ender 3v2 Rafts: No Supports: No Resolution: 0.2 Infill: 15 Filament material: PLA Filament brand: Hatchbox Filament color: Rainbow Dark Notes: Micro Swiss direct drive at 225°C w/ 2mm…
While playing with gear designs I came up with this idea, and I found it interesting enough to share. The gears can move side to side, but they don't fall out. After printing the 60mm version I also uploaded two longer ones (80mm and…
