Counting matching models…
Description This is a remixed and upgraded version of the original Gravity Broom Holder, made for smart and secure storage of tools, broomsticks, or garden gear with round handles. The system allows you to organize various handle sizes –…
Printed in PETG with a 45 degree tilt for greater resistance. The stl file is already placed in the correct position. - Enable borders - Activate organic supports - Gyroid filling at 20%
Using jblake's dimensions of his reinforced opener, I redrew it in Fusion 360 so I more quickly scale to different sizes while keeping the thickness at 14mm and the “catch tabs” at 2mm. This is the 73 mm model in the collection. Printing…
The official Prusa model of the MK3S extruder body (version R5) but the part that holds pinda has 3 perimeters and 40% infill. This thing often cracked for me when I was tightening PINDA, thus some more perimeters around PINDA should be…
Hier noch eine Zwangsbelüftung für die Elektronik des MK4 / MK4S als Zubehör für mein Druckergehäuse. Die Idee ist die nicht außerhalb platzierbare Elektronik, beim Drucken mit Zusatzheizung im Gehäuse, vor Überhitzung ui schützen. Ihr…
I had best results printed in PETG, with 30% infill and supports.
The original trigger for the SO-100/101 arm is prone to breaking at the “neck” — specifically, the two slender posts that connect the trigger ring to the base plate that mounts to the motor. This redesigned version reinforces those two…
This remix of the Prusa Core One dust filter offers a sturdier and more user-friendly solution for the vent openings. Improvements over the original design: Reinforced cover construction for better durability Increased clearance between…
IMPORTANT - VERSION INFORMATION This listing represent V1, the main and current version of the system. An earlier ''Early Release'' version is still included as a legacy option for users who only want a press-fit, tool-free assembly.…
Here is a reinforced replacement for broken kitchen hinge. You don't need to use any supports to print it. I printed it with these parameters: - 0,2 mm layers height - 6 walls - 30 % infill Please give it a 💖 if you like it 🥰
The original Articulated Shark was a little to wibbly wobbly in the up down articulation for my little nephew to play with. I added some additional parts to stiffen the shark out quite a bit. It is still just as wibbly wobbly going side…
I had made a few of these(original non-reinforced version) for my son and his friends, and was annoyed with the tail popping out. Looked for a remix that was fixed, and found this stable version. Reading through the comments I saw that…
A strong and practical 3D printable wall hook designed for secure mounting and heavy-duty everyday use. The reinforced triangular structure provides excellent strength, stability, and durability while keeping the design compact. Perfect…
This updated version of my original 'Wallhook' makes it even stronger than before, and featuring rounded edges that provide a cleaner look while reducing stress concentration points in the plastic. I have integrated two dedicated screw…
A remix of a great spoon rest! Due to the orientation of the print (flat), the rest 'nibs' are a weakness. One of them broke for me on the original during a wash. Remix Changes Thicker rest wall (+1mm) Support ribs Links & Reference…
Printing I printed the bins with both 0.4 mm and 0.6 mm nozzles, both work fine. There are all variations of the bins from 1x1x1 to 7x7x10, in regular- and half-grid variations (although most are obviously untested). Recommended settings…
Please click ❤LIKE❤ if you appreciate my work 😊 Strong and reliable reinforced corner brackets for everyday DIY projects. Includes two versions: a compact 2-screw bracket and a 4-screw heavy-duty version for increased strength and…
Fellow Creality K1 Owners, Yup, that's right! Yet another take on mounting both the spool holder on the side of the Creality K1. With the original, I noticed that the spool was sagging. So with this model it has 4 points of attachment to…
Reinforced version of side spool holder with option to attach side bin
A reinforced bookend (for taller or heavier books) with a honeycomb pattern on the visible face. No supports required, no post-processing. Just a clean and simple print. The visible face is about 120mm wide by 140mm tall. The base is…
I was tired of wasting filament and time for printing several different models of this case which had very weak hinges and broke instantly, so I fired up Sharpr3D and fixed the hinge issue myself. There is also a clip to close the case…
🧩 NASA-Style Hexagonal Flexible Mesh Created by KNINcustom · Explained step-by-step on my YouTube channel 🎥 👉 https://www.youtube.com/@KNIN_Custom 🔍 Description This is a NASA-style hexagonal flexible mesh , designed from scratch in…
Full credit to dkarjadi for his original design which can be found here . What is it? This model is an upgraded chamber light to "assist" the wimpy one that comes with the Bambu X1/X1 Carbon and the P1S. Printed in grey ASA, gaskets in…
A 19-inch Reinforced Modular Rack Mount Blanks. This is the beefier version of the regular 19-inch modular blanks , for those who need the extra strength. I have added a .3MF project file as well. This mount is part of a 19-inch modular…
NOTE: This is an add-on to the pre-existing "QUICK-CLIP : Base Starter Kit" Post-Processing Difficulty: Easy (Ready to Use from Printer) Tools Needed: None Introduction & Instructions: QUICK-CLIP is a versatile mounting system that I…
⚙ Print Settings & Advice: * Orientation: Position the model flat on the bed to ensure the screw holes and reinforcing rib print perfectly without any support material. * Perimeters (Walls): Min. 4 perimeters for extra rigidity. *…
The original coffee scoop that I used for some two years broke at the connection between the handle and the measure cup, so I did a redesign using Fusion 360, preserving the original dimensions.
This model is compatible with the lego system.
This remix thickens the loop to reduce the change of breakage via wear and tear.
Liked the reinforced joints that vexanix added, just wanted the other head(s) from the sharks Category: Toys & Games
A remix of Hajo's most excellent bird water feeder. Like Hajo's original post, all the other bird drink machines that I found drained in seconds, but this one actually works! Unfortunately, I over tightened the PET bottle and sheared the…
This model is compatible with the lego system.
This is a parametric model made in Fusion 360 to suit your pipy needs. Simply go to “Modify→Change Parameters” and choose the values that you want to suit your pipe's diameter. Beware, the stl provided is for 32mm diameter pipes. Thanks…
This is a brand new complete case for Corne Keyboard (https://github.com/foostan/crkbd) new version 2024 4.1 It have integrated spacer for perfectly fit and support PCB, renforced plate to give a better feeling when mounting and typing…
A modular, two-part 16 ports keystone patch-panel made to fit in 19-inch racks. Each module has 8 keystone jacks. This is the beefier version of the regular 19-inch modular keystone patch panel , for those who need the extra strength. I…
This is a reverse engineered Prusa MMU2 idler with a few changes. As I've cracked 2 of the original ones and had some issues with idler bearings being a little too loose, I've drawn this in Fusion basing on original. Fit and size are the…
Remix to increase the stiffness of the handle. Added a chamfered rib to the back of the handle so it flexes less during use. I also made moderate changes to how the joints are built to increase their stability during printing. I recommend…
This is a remix of the Bag Clip by Andrei. I love the design and in the spirit of over-engineering a bag clip, I added a hole for an M3 bolt and nut in place of the original's printed dowel. It uses a standard 15mm long M3 bolt and M3 nut…
This model is compatible with the lego system.
this is a 19" 1u patch panel for your rack , you can bolt it together whit some nuts and bolts (m4). brim recomended supports not necesery print whith the front on the bed you can also print something else from the collection and it will…
FIND ALL MY DESIGNS HERE : https://cults3d.com/en/users/Zuff/creations Do you like my work? Can you support me with a ☕ or maybe a 🍺? It all depends on the time 😄 --- Reinforced part to fix the "Nema 17" motors of the Z axis on Creality…
More durable design, changed the phone holder to another one.
Articulated shark reinforced Tried different remixes of the model and all of them have been broken by kids very quickly. This version is little bit more durable and compatible with Lego . You can also download just reinforced version.…
These are the SVGs I used to make the pretty patterns featured in my video here:
This feet piece was moddeled after original Toa Mata feet, but with modificatons reinforcing the socket for the ball joint and decreasing amount of supports needed. I recommend to print in PETG (this is what I've tested). Print with…
See updated model here on Thangs This is remixed from these soucres: Spiralized Gridfinity Bins and Gridfinity - Vase Mode I liked the spiralized gridfinity bin, but it's pretty flimsy and doesn't stack super well, and the reinforced one…
An improved redesign of my original ceiling hook remix, tailored for 40mm rods or tools, now features a reinforced hook for enhanced durability and a larger lip to prevent items from tipping over. This hook is crafted to securely attach…
This remix of N00P's zipper pull should be a tad stronger. I liked the design, but it kept wearing out. Please iterate on this one and make it even better! I encourage you to use your Slicer of choice to scale both pieces in thickness…
Mammotion Luba 2 reinforced side protection
Spindle with reinforced base for Yarn Spinner (Rotating Skein Holder for Crochet/Knitting) by mshipman
I couldn't find the correct barrel nut so i made my own! this is not a perfect solution, but I was able to get a good hold on a 16mm barrel using a kit of nuts and screws I had from a previous project (https://a.co/d/hldKSm2 ) Hardware…
The model is straightforward; print the handle upside-down, and the insert on its side. Use cyanoacrylate glue for the insert. This was originally designed by jasonalday on Thingi, and the insert design remixed by DanBuro on the same…
Reinforced Version of TruTech's awesome Flipper Zero Case with f4r0kh's Wifi DevBoard Cutout on Top. Bottom fits the Flipper with TPU Cover. Since the holes for fixing the clips were still too thin for me, I reinforced this area a bit…
***If you like what you see please give a “Like” and a “Follow”! The goal is to get over 200 followers!*** This is a remix of JHB's Articulated Bender. I was always having issues with the tabs inside the articulated parts breaking so I…
Due to the weight of the cable on the neptune 4, the old head has been... bent, fear not, here I am, stronger than ever! 🤩 Do you like the design? You can help fund innovations like this! Consider supporting me! Much appreciation given to…
Reinforced in blender and then edges hand smoothed/filleted with dynamic topo sculpting
Uses m3 screws and bolts instead of the less common and weaker m2 screws. the spiral plate, a common fail point, is significantly reinforced. You will likely need an assortment of fairly long (25mm+) screws.
Rear fender replacement for Xiaomi M365 scooter. This part is both stronger and lighter (160g) than the original one, though I did manage to break it after a while, so consider using one of the aftermarket fender supports. Print Settings…
A freestanding holder for a filament spool. Fits spools of 200mm diameter and inner diameter of 50mm. Printed at 0.2 layer height, 2 perimeters and 10% gyroid infill. No supports required.
This is a Wheels mod for the Fractal Design 7 XL and Meshify 2 XL case, that i use as my huge DIY NAS/Server. (Also works with the non-XL Fractal Define 7 and perhaps more) The original Idea and files come from Wendell at Level1Techs I…
BOM: Printed with ROSA3D Starter PLA Retro Gray When you need to build something strong, standard flimsy brackets won't cut it. This set of heavy-duty, reinforced 90-degree corner brackets is designed for serious DIY, workshop, and…
Remix of MattCalls paper roll holder, added fillets for increased strength. Requires his universal hooks for mounting.
i loved the phone repair stand that DimplyKitten824 made, but i broke 4 of them in a week, so i reinforced it a bit and made the lcd holding arm bigger so it will last in a retail repair environment. This stand is for any phone you open…
The same skink you all love, now with slightly stronger limb joints. I originally made the arm joints thicker after scaling this guy to 350% for my large print surface. There is still enough clearance for good enough movement, though its…
This is an upgraded version of the original and popular sheep toilet paper holder design https://www.thingiverse.com/thing:3705577 by Hiob. The upgrade includes stiffer, easier to mount brackets into which the updated profiles (sheep_2…
Upgrade the stability of your IKEA LACK furniture with this reinforced corner bracket, designed specifically to strengthen table legs and prevent wobble over time. This 3D-printable bracket wraps securely around the leg while anchoring…
I wanted a littel more regidity for heavier Books and in my case Retro PC-Game BigBoxes. I added an arm on one side with this bending from heavier Books is reduced. Downside is that the Bookend can only used “behind” the Books. Model is…
The regular spring in the (awesome) design by @DeSteiner sometimes feels a bit too weak or too short. I've created three alternatives: regular thickness, but extended thicker spring, same length as original thicker spring, AND extended…
Essentially the same as the original design but with reinforced clips/guides
I bought my Saturn 2 in Feb. 2023. I tried a few of the Drip Arms and they did not quite fit properly or securely. When placing and removing the build tray, the drip arm would come off with the tray. There was some odd fumbling around w/…
Remixed from "PCI / ISA Slot Bracket for IDE 40pin to SD adapter", this adds the following enhancements: Thicker triangle areas along the bracket so stress from inserting/removing the SD card doesn't flex the bracket as much. Enclosed…
Cutter with scraper, remix - reinforced version. I have printed this with PETG 0,15mm or 0,2mm layer height and 5 perimeters (4 is enough). Printed on MK4 without Input Shaper to make it strong.
This Z stepper mount is designed for Ender 3 pro but will work on some others as well. It uses the factory screws and screw holes. It is designed as reinforced, more sturdy mount with slotted holes for mounting the motor so you can align…
high quality file labubu keychain with stronger keyring slot thn other files out which keep breaking. hope you enjoy!
Do you get hot in your car while driving? Do your passengers complain about your weak A/C? Do you want to experience the thrill of having a leaf blower aimed at your head while on the highway? Or maybe your A/C just broke and you're…
Upgrade your IKEA Kallax storage unit with the Kallax Hider panel system! Remixed for a more robust and reliable solution to cover the unsightly gaps in your Kallax shelves. The design connection mechanism was enhanced, ensuring…
i made reinforcements for the fan cover so it wont break as easily while disassembling the toolhead.
remix from https://www.thingiverse.com/thing:2334264 The original idea is great! I wanted shoulder mounts for my gopro and insta360s long time and finally found the Nicrombious's one! But I also found some stress concentration on original…
While optimizing the placement of instruments on the pegboard, the original clips broke frequently. I created a version with enhanced spring strength and was pleased with their survivability. The original model can be found here…
The original model was too thin and flimsy when printed so I thickened the design. I removed the hole in the center.
Strong and easy to print bracket for Nema 17 stepper motor. Bracket was designed from scratch for my DIY 3D printer. Main goals for design : bracket must cooperate with end mount for motor screew ( this means that some of its dimmensions…
Habe ein REMIX dieses Spoolenhalters vom K1 für den K1C erstellt, weil die mittleren Löchner beim K1C etwas wo anders sitzen. Links und rechts M3x16 mit einer Mutter. Mitte je M3x16 Remix vom:…
Made the tabs much stronger and made a few small improvements overall to the model. Tabs should not break off! Galaxy Black Prusament! Print in whatever you like! PLA
Reinforced remix of the riser by JoshEEthewin
So I reinforced the surface double for a better stiffness. No special presets necessary. Printed with Prusa orange PETG, 0.2 mm.
I designed this after the master sword in Twilight Princess. It uses a 1/2" PVC pipe as reinforcement. It doesn't require glue or supports. Files are designed to be printed in a 8"x8"x8" volume. Print instructions Unassociated tags:…
A strong adapter to mount the HyperX QuadCast microphone horizontally. It lets you use the original nut and thumbscrew to secure it horizontally on its stand. The model I based this off had the majority of the weight resting on a very…
A thicker lever compared with the original design, making it stronger
Remix of Forker45 Air Tool Hanger. I liked the original design but wanted more bulk when printing in PLA.
This is a reinforced internal 90° connector for 2020 V-slot aluminum extrusion profiles . It fits snugly inside two intersecting profiles, joining them at a perfect right angle (90°) with a secure snap-fit / friction-fit connection . This…
Fixed through netfabb as the original file had some internal gaps causing improper infill/support material use. Then added a bar between the handlebars as my first print had the left handlebar break off easily. Then added a small cylinder…
Reinforced version of the two bases with extra braces to make the sides more stable. In addition to the stability the braces will also act as bridges while printing. There is also a 173mm version to fit printers with smaller print table
This model is compatible with the lego system.
Replacement gear for the Odin M12 Speedloader. I reinforced the size of the paddles by removing one of the original six. You dont feel any real difference while loading, it is almost as fast as the original gear. You can load 10 BBs with…
This is an enforced version of the Voron Stealthburner latch that for the ECAS version has a very thin part that easily breaks. On the the picture, is the original latch thinned to make space for the ECAS shown broken. To prevent…
After 1 year, the original Beeline Moto GPS holder cracked (see photo). Therefore I designed a stronger holder (I hope) to replace it. Content Beeline - Original - Clip v1.0 : Clip to block Beeline GPS Beeline - Original - Holder v1.0.stl…
What i changed: Skrewhole depth: The screw holes are no longer sunk in the part. The screw presses on a layer that is higher than the surface that the L Boxx attaches to when being pulled up. This should prevent the layers from separating…
Reinforced Main Drive Spindle - just as the description states. I had my original split right in the area - that I reinforced. I probably shouldn't have tightened it so much.
Reinforced version of the two bases with extra braces to make the sides more stable. In addition to the stability the braces will also act as bridges while printing.
The original broke when screwing in the bottle, so I created a reinforced version. (I added four slanted elements around the bottle holder so it's harder to be torn apart by the bottle.) Note: Only put in water, not sugar water, unless…
![Best Spoon Rest Ever - Reinforced [remix]](https://media.printables.com/media/prints/a3e31f33-ec0e-4d2e-992c-517e7d5a8a9e/images/12127586_9e05b6a9-0dae-4f2d-8207-1ffd6c22a79d_73eeeebd-3e64-4a36-ab87-c28d882c365f/20260222_132201-photoroom.png)
![[MK3S+] Reinforced heatbed cable support](https://media.printables.com/media/prints/81016/images/871806_49f8d183-0773-4a1c-aaa4-9048a9c5c7ae/screenshot-2021-10-17-204750.jpg)
