2,016 models
Update on June 21, 2022: Thanks to everyone who has been printing and sharing this design! When I first uploaded it, I had no idea that what I considered kind of a goofy design would be so popular! It is very cool to see how far it has…
Print approx. €4.93–€6.02 excl. taxPreliminary estimate for one variant
This is a curled up version of the fabulous Friendly Articulated Slug designed by Isaiah Steckling ( Printables , Thingiverse ). It is intended to print large and really huge slugs. For normal size slugs you can use the original model.…
Print approx. €35.04–€42.83 excl. taxPreliminary estimate for one variant
BEST PRINTED WITH PETG I modelled this in Blender while making sure it can function when printed. All you need is glue to glue the two hinge parts together while inside the handle and blade. It should take around 4-5 hours for 100% infill…
Print approx. €3.59–€4.39 excl. taxPreliminary estimate for PETGSource material: PET
Intro Never worry about forgetting your coin again! This 3D-printable 1 € trolley coin lets you unlock supermarket shopping carts without needing real money. It’s designed to be easy to print and uses less filament than most other trolley…
Print approx. €0.09–€0.11 excl. taxPreliminary estimate for PETGSource material: PET
This is a wall mount designed for LEGO F1 Speed Champions sets. The most popular commercially available mount for these sets (which this model was inspired by) requires the use of screws, which is not always an option for renters or if…
Print approx. €0.45–€0.55 excl. taxPreliminary estimate for PETGSource material: PET
Here is one idea that considers environmental issues. I made an eco-friendly garbage bag holder using a plastic bag. You can brush dust off by hand because it is under the side of desk. The thickness of the table that can be attached is…
Print approx. €0.88–€1.07 excl. taxPreliminary estimate for one variant
This has been remixed from https://www.thingiverse.com/thing:1615502 and turned into a picture frame. Parts Needed (4) M3*8 screws Print Settings Supports suggested for the opening of the photo. Layer height of 0.20 mm or smaller. 10%…
Print approx. €2.11–€2.58 excl. taxPreliminary estimate for one variant
Today I present to you portable bidet as a more eco friendly toilet paper replacement. In times of a global toilet paper crysis it might be finally time to switch over to what I think is the superior solution: Zero waste, no need to panic…
Print approx. €2.33–€2.84 excl. taxPreliminary estimate for PETGSource material: PET
Fern can be seen wearing this in her hair througout the show. There are two versions: Curved - Requires supports. glue on a hairclip and your good to go. Flat - Easier to print. If you are using PLA, you can put it in hot water an and…
Print approx. €4.83–€5.91 excl. taxPreliminary estimate for one variant
A lid to keep your bar keepers friend in its container. Print it top side down, no supports. It's not quite a press fit because popping it off with force gets the stuff in the air and you probably wouldn't enjoy inhaling it. Knurls to be…
Print approx. €1.10–€1.35 excl. taxPreliminary estimate for one variant
These disks are tools used for making friendship bracelets. I created 8 and 16 slot versions in Fusion 360. To use, start with 7 strings about a foot in length that are tied together on one end in combination with the 8 slot disk. Push…
Print approx. €1.33–€1.62 excl. taxPreliminary estimate for one variant
Great original models by Molodos and Oak . I combined the two models to make a Friendly Articulated Brain with arms and legs. Note: Prints well at 75% if you want to go smaller. Share a picture if you print one!
Print approx. €3.54–€4.32 excl. taxPreliminary estimate for one variant
A 3d printed scaper's tool is a handy device for aquascaping enthusiasts who want to create and maintain beautiful underwater landscapes in their aquariums. It also works great as a scraper. The design of the scaper's tool is parametric,…
Print approx. €0.56–€0.69 excl. taxPreliminary estimate for PETGSource material: PET
Meet Mini Fries Buddy , the ultimate snack-sized friend! 🍟✨ ✅ Slightly Bigger Than Other Buddies – More room for extra fries! ✅ Perfect for Desks, Shelves & Collectibles – A crispy addition to your space ✅ Lightweight & Fun to Print –…
Print approx. €0.27–€0.33 excl. taxPreliminary estimate for one variant
In the files you'll find a 16-thread and a 8-thread version of it. 80 mm in diameter 2,5 mm thick With haptic directional arrows, letters and braille. You can print it directly without supports. In the files you'll find also find the…
Print approx. €1.38–€1.69 excl. taxPreliminary estimate for one variant
Ninja Star (Shuriken) fidget spinners and stand! There are two versions of the model - the one with name “Rounded Corners” is the kid friendly version. I've also included the model for the stand that is shown in the photos - which makes…
Print approx. €1.43–€1.74 excl. taxPreliminary estimate for one variant
It would be nice if you post your make. Thank you
Print approx. €0.06–€0.07 excl. taxPreliminary estimate for one variant
This is a remix of Eco-friendly deskside trash bags holder by rin_ofumi that replaces the original screw with a thumb screw. Since I move the holders often, this allows for install without a screwdriver.
Print approx. €1.22–€1.49 excl. taxPreliminary estimate for PETGSource material: PET
I designed this custom version of the classic peg brain teaser. I'm neurodivergent and have dexterity issues. Therefore, the usual version of the peg games found online using golf tees were hard for me to play with. I find the pegs I…
Print approx. €2.28–€2.79 excl. taxPreliminary estimate for one variant
This version of the original "Buddy the Pug" by Josef Prusa is modified to be printed in two parts, giving you the opportunity to add some color and make Buddy even cuter! The model is split into two sections: one for the main body and…
Print approx. €0.91–€1.11 excl. taxPreliminary estimate for one variant
This is a renter friendly wall mount designed for the TP-Link TL-SG105 5-Port Desktop Switch. Add 3M Command Strips (or something equivalent) to the back of the mount, put it on your wall, and hook the network switch onto it. Printed in…
Print approx. €0.34–€0.42 excl. taxPreliminary estimate for one variant
Thimble with a cutout that can be operated with longer nails. Inner diameter 15mm.
Print approx. €0.25–€0.31 excl. taxPreliminary estimate for one variant
I really appreciate you if you can consider a coffee for me if you like the design! ------- Lid snaps perfectly with Bar Keepers Friend. The lid has the inner depth to hold the seal to avoid powder comes out from the top when the can…
Print approx. €0.55–€0.67 excl. taxPreliminary estimate for one variant
At my daughter school, one teacher ask me if I can design and print a friendship bench. You already know the answer: YES of course. The idea of the friendship bench is to send a message to other students to indicate that you feel alone…
Print approx. €4.07–€4.98 excl. taxPreliminary estimate for one variant
Lithophane mug shot of all the horror characters by year. Enjoy!
Print approx. €1.35–€1.64 excl. taxPreliminary estimate for one variant
This fan runs on dual 18650 batteries. The necked down nozzle design increases air velocity for optimal cooling. Bill of materials: Bottom cap contact spring: https://a.co/d/hnrPVWE Sliding Switch: https://a.co/d/9z3JiiK Spring contacts:…
Print approx. €4.53–€5.54 excl. taxPreliminary estimate for one variant
Needed to replace the blade on my multitool for working at my school.
Print approx. €0.15–€0.18 excl. taxPreliminary estimate for one variant
Print a new belt buckle for your GRIP6 belt strap. Being plastic, it can travel with you and go through metal detectors. Printing the belt buckle with its iconic curve would require support and show horrible layer lines. Instead, I…
Print approx. €0.67–€0.82 excl. taxPreliminary estimate for one variant
Our robot vacuum cleaner is 5mm too high to fit under a sideboard with its turret. That's why I gave it little feet. Now - as you can see - dust doesn't stand a chance under the sideboard either :) The Fusion360 model uses params to be…
Print approx. €1.28–€1.56 excl. taxPreliminary estimate for one variant
Since I cannot endorse hurting animals for personal pleasure, I thought a sign with the famous quote from Finding Nemo might be the right model for me to participate in the current contest. The design involves 5 color changes to get the…
Print approx. €4.14–€5.06 excl. taxPreliminary estimate for one variant
This simple modified version of the RPI 3 mount has a hole on the bottom. Less filament to print without compromisring strengt Should allow for slightly better cooling
Print approx. €4.13–€5.05 excl. taxPreliminary estimate for one variant
printed with ortur laser master 3 10W Laser For engraving Speed 14000 mm/m Power 50% For cutting Speed 270 mm/m Power 85% Printable doesn't allowing .lbrn2 files so download the text file and change the .txt to .lbrn2
Print approx. €0.59–€0.72 excl. taxPreliminary estimate for one variant
Print your very own decorative frieze, inspired by those used to build Frank Lloyd Wright’s “A.D. German Warehouse". Wright's innovative concrete friezes were made by pouring concrete into molds. The concrete casts decorate the exterior…
Print approx. €3.68–€4.50 excl. taxPreliminary estimate for one variant
Optimized Beehive Entrance I designed this optimized entrance for my beehive to provide a more natural and bee-friendly opening size, similar to what bees prefer in the wild. The upper edge of the entrance is rounded to make it easier for…
Print approx. €0.61–€0.75 excl. taxPreliminary estimate for PETGSource material: PET
My first upload here :) Like the original design and use it on my own printers - I only added a cable channel inside the part to route the cable to the back without the need of cable ties… so you can hide the cables for a more cleaner…
Print approx. €4.17–€5.10 excl. taxPreliminary estimate for PETGSource material: PET
Here is a spring themed Coffee plate. It's a really simple print. You can print everything in white and then paint it using acrylic colours. or using the MMU. I uploaded 3 GCodes: MK4 0.10 mm layer height MKA 0.05 mm layer height Mk4 MMU…
Print approx. €1.74–€2.13 excl. taxPreliminary estimate for one variant
The original model from Thingiverse (see link) didn't fit very well on Thomas & Friends wooden track which is ~12.25mm thick. So I used the .scad from the original to make a slightly taller version (height = 12.75 mm) to work with this…
Print approx. €0.60–€0.73 excl. taxPreliminary estimate for PETGSource material: PET
I used Tinkercad to make this and I don't know if it works with all 3d printers or whatever you're using it for. Feel free to remix it I'm not a huge creator. Hope you have fun with it! -HardworkingDog (P.S. Sorry the image quality sucks…
Print approx. €0.33–€0.40 excl. taxPreliminary estimate for one variant
Compatible for the southern hemisphere only. For the northern-hemisphere version, check here for the correct parts: Print Friendly Curved Analemma Vertical Plate for 3DMason Heliochronometers by 3DMason | Download free STL model |…
Print approx. €0.14–€0.17 excl. taxPreliminary estimate for PETGSource material: PET
Do you love fries? Do you have a Nintendo Switch? This fries switch game case is the perfect thing for you. This switch game case can hold up to 9 games. Dimensions: 3.4 inch x 1.5 inch x 2.5 inch (87.7mm x 38.2mm x 65.1mm)
Print approx. €3.77–€4.61 excl. taxPreliminary estimate for one variant
Hello, today I prepared for you remix of nice 3D model of Toothless. The original model has marking and different color of the left part of the tail. This was an imitation of the injury from the first film. I removed this mark so I could…
A dwarf tank/paladin The detail featured on the shield is inspired by an architectural detail of an Art Nouveau villa in Lodz, Poland. Suitable for 28mm tabletop games. Created so that it does not need any supports and prints well on a…
Ready to smack nonbelievers. This has a thin pointy sword - make sure your cooling is good or print 2 at a time. Suitable for 28mm tabletop games. Created so that it does not need any supports and prints well on a cheap FDM 3d printer…
Meet Drako, the softest dragon you’ll ever print! With his cute horns, squishy tail, and big bright eyes, he’s here to melt hearts—not villages. Fast to print and support-free, Drako is the perfect blend of myth and cuteness.
A quick print to add some festivity to small objects. Requires only a single filament change. There are two versions of the model, one with a built-in brim on the ball for easy printing and one that has no additional supports in case you…
A Chibi style version of Frieren, the protagonist of the manga/anime Sousou no Frieren . Printable on FDM printers. Two models uploaded, which only different in eye parts: one has blank eyes and another has them modeled. Default size is…
Welcome to GlennovitS3D. Join the Club on Printables.com to support creation of new models , get access to exclusive models , and get commercial rights, to sell prints. Join today - GlennovitS3D - or check out my model collection or my…
* NOTICE: I reuploaded the correct file - uploaded wrong file earlier that could cause slicing problems * Because it had to be done. The CoronaBeholder is a particularly nasty floating bag of eyeballs. Now, it can't transmit any diseases…
Materials: Orange Brown Gold White Black Red Blue Yellow You will need glue for assembly. Most parts simply fit into each other, but some are better glued. In the updated file, the sofa and some other parts have been redesigned for more…
If you’d like me to keep going and bring you even more adorable models, you can support me on Patreon: patreon.com/draftaxis 🌸 Here’s my brand new design — a mischievous flexi pumpkin 🎃 ✨ He’s cute, playful, and just a little bit naughty…
They may have taken down the Trump/Epstein Best Friends Forever statue, but now you can celebrate Friendship Month at home and make your own. Larger version of the statue STL available to download here:…
This Friendly Articulated Snail is a remix of thing:4847937 by Nebetbastet which is actually a remix of Isaiah 's Slug. This version just has the protrusion to allow the snail shell to attach. This blender remix allows easy printing with…
This Friendly Articulated Slug is a remix of thing:4727448 by Isaiah that allows easy printing with default settings by adding a simple brim that connects all the parts on the bottom and just peels off once you finish printing. I created…
I have had this idea for a ‘fried egg’ fidget fabric/drink coaster for a little while. I loved the idea of using mesh fabric in the fried egg to give it flexibility and make it feel more ‘egg-like’. The egg shell with the magnets is a fun…
My take on a Honeycomb cutout style wallet card for Apple Airtags. Once or twice a year I tend to misplace my wallet somewhere. It usually winds up turning up somewhere in the garage or in the car, under the seat! An Apple Air Tag would…
He's coming... https://www.youtube.com/watch?v=-ea7oW4XXww Suitable for 28mm tabletop games. Created so that it does not need any supports and prints well on a cheap FDM 3d printer like the Ender 3. There are variants with square and…
A dragonman Suitable for 28mm tabletop games. Created so that it does not need any supports and prints well on a cheap FDM 3d printer like the Ender 3. NOTE other minis are available on my Patreon , Cults3D and MyMiniFactory . Let me know…
Orc fighter with axe Suitable for 28mm tabletop games. Created so that it does not need any supports and prints well on a cheap FDM 3d printer like the Ender 3. There are variants with square and round bases. NOTE The other minis in the…
Follow us on Patreon & Instagram for the latest models. ❱ Instagram: https://www.instagram.com/sektor7_studios_3d/ ❱ Patreon: https://www.patreon.com/sektor7_studios (commercial license & more beautiful designs) PEACE GHOST (THE FRIENDLY…
There are loads of Garmin interfaces out there, but (in my opinion) they all fail for one of two reasons: the intended print orientation is horizontal, thus mandating support structures that are difficult to remove and leave residual…
A suit of armour on a stand. It could be magically alive, who knows. Suitable for 28mm tabletop games. Created so that it does not need any supports and prints well on a cheap FDM 3d printer like the Ender 3. Includes variants with 20mm…
I recommend making these with silk PLA filament for extra shine ✨ Print settings: 0.2mm layer height 0.4mm nozzle Compatible with my other models: Craft Tweezers Beedle Friendship Bracelet Making Tool ✨If you like what I do✨ Follow me for…
A friendly rodent Suitable for 28mm tabletop games. Created so that it does not need any supports and prints well on a cheap FDM 3d printer like the Ender 3. NOTE The other minis seen in one of the images are available on my Patreon . Let…
A pickle with articulated dangly legs No supports necessary
A 3x3in stone circle with carved pentagram. Can be used as a piece of terrain or a base. Suitable for tabletop games. Created so that it does not need any supports and prints well on a cheap FDM 3d printer like the Ender 3. NOTE A demon…
Yet another knight on foot with a sword. Suitable for 28mm tabletop games. Created so that it does not need any supports and prints well on a cheap FDM 3d printer like the Ender 3. There are variants with square and round bases. NOTE The…
This loom/station will allow you to more efficiently make friendship (macrame) bracelets. Especially the more complex patterns with 10+ strings. Suggested use : The bottom arc has 50+ slots to fasten the strings quickly. They are held in…
Big brute clad in metal. See how it prints: https://www.youtube.com/shorts/5sd5Ic9fE7A Suitable for 28mm tabletop games. Created so that it does not need any supports and prints well on a cheap FDM 3d printer like the Ender 3. NOTE other…
A frogman. Somebody forgot to drain the swamp and now it strikes back with pointy sticks. Suitable for 28mm tabletop games. Created so that it does not need any supports and prints well on a cheap FDM 3d printer like the Ender 3. NOTE…
All the d13 hands (besides the daddy finger)
A figure of Frieren, an anime character. Default size is roughly in 1/12 scale, which could barely be printed by a FDM printer under normal setups. Printing Tips (FDM, default size) Support materials are required. Set higher infill or…
Frieren's Mage Staff - Sousou no Frieren / Frieren: Beyond Journey's End Red Fabric to wrap around the staff's head is not included. Thread the corner of the fabric through the bead and secure with adhesive. This build fits schedule 40…
A human cleric with mace Suitable for 28mm tabletop games. Created so that it does not need any supports and prints well on a cheap FDM 3d printer like the Ender 3. There are variants with square and round bases. NOTE The old wizard seen…
EDIT - Please see version 2.0 @ https://www.printables.com/model/1184649-johnny-5-comes-alive-v2 My unique take on the iconic Johnny 5, designed from the ground up to be 3D print-friendly. Unlike other models you might find scattered…
A ghost. Or maybe just some laundry on a windy day, who knows? Suitable for 28mm tabletop games. Created so that it does not need any supports and prints well on a cheap FDM 3d printer like the Ender 3. NOTE other minis seen in one of the…
Baaah. Suitable for 28mm tabletop games. Created so that it does not need any supports and prints well on a cheap FDM 3d printer like the Ender 3. NOTE Other models seen in the images are available on my Patreon . Let me know how it…
This is the remixed version of https://www.thingiverse.com/thing:4856577 . I've cleaned up floating objects and holes in the model. I also redone the base so it is a bit smaller. Print Settings Printer Brand: Creality Printer: Ender 3…
Supportless Bugbear with a club/mace. Suitable for 28mm tabletop games. Created so that it does not need any supports and prints well on a cheap FDM 3d printer like the Ender 3. There are variants with square and round bases. NOTE The…
Updated!! 28mm Modular Medieval RPG House – FDM-Friendly Build the perfect tabletop RPG setting with this modular 28mm medieval house, designed for easy printing, gameplay, and future expansions. Whether you’re running D&D, Pathfinder,…
Cooking time: over 4 hours 🔥🍳 I recommend using PLA for the yolk that's 'fed' on eco-friendly materials. Its rich color resembles free-range eggs 🦖. Printing without supports and other eggshell 🐣✅ Easy assembly — no glue 🙌 ✅ Use…
G-Gauge/Gauge-1 Thomas the Tank Engine model Please take a look at my "Making of.." video of the small S-Gauge: https://youtu.be/3TmLReQIERc Subscribe or follow me on: Instagram: www.instagram.com/agepbiz YouTube:…
A townsfolke zombie. Suitable for 28mm tabletop games. Created so that it does not need any supports and prints well on a cheap FDM 3d printer like the Ender 3. There are variants with square and round bases. NOTE Other zombies seen in…
A silicone sock adds about 1.5mm of material around the heater block. This seems to be enough to block or divert a lot of the direct air flow from the stock mk3s+ fan shroud. In an effort to compensate for this I've modified the mk3s+ fan…
Welcome to the Bergfried. I ever thought of optimizing the space a dice tower can give. So far I, opted for efficient rolling paths to make most out of the given space, making my dice towers smaller in diameter. But this time I added…
A nothic. One-eyed fella with spikes. Created in Virtual Reality in Adobe Medium. Suitable for 28mm tabletop games. Created so that it does not need any supports and prints well on a cheap FDM 3d printer like the Ender 3. NOTE the…
100% infill first layer height .16 layer height .08 colors and swaps black layers 1-4 red layers 5-7 grey/silver layer 8 white layers 9+ few other settings I like to use are inner/ outer wall 150mm/s infill overlap 25% hilbert curve top…
Cantilever Tool/Sewing Box Remix (PLA-Optimized, Modular Joints) This remix of the popular parametric cantilever box features a key modification for easier, faster printing and improved stability, especially for PLA users. Key Features of…
Could be a generic female spellcaster too. Suitable for 28mm tabletop games. Created so that it does not need any supports and prints well on a cheap FDM 3d printer like the Ender 3. NOTE other minis seen in one of the images are…
A human with a short bow. Suitable for 28mm tabletop games. Created so that it does not need any supports and prints well on a cheap FDM 3d printer like the Ender 3. There are variants with square and round bases. NOTE The mounted archer…
Elite Saracen Spearman. Suitable for 28mm tabletop games. Created so that it does not need any supports and prints well on a cheap FDM 3d printer like the Ender 3. There are variants with square and round bases. NOTE The mounted spearman…
With its cute and friendly appearance, this delightful creature is designed to print easily and flawlessly, whether you're using a beginner 3D Printer or a fancy pants one! And, thanks to its articulated joints, you can pose your axolotl…
A kobold with a pickaxe Suitable for 28mm tabletop games. Created so that it does not need any supports and prints well on a cheap FDM 3d printer like the Ender 3. There are variants with square and round bases. NOTE Other kobolds seen in…
I printed rcmz's print-in-place (PIP) Tensegrity. Thanks rcmz for sharing this fantastic model! My PIP outcome was pretty humble due to shitty filament, maybe also due to sub-optimized parameters. But throwing 400grams of material with…
A knight with a battle axe and a wolf rib helmet. Suitable for 28mm tabletop games. Created so that it does not need any supports and prints well on a cheap FDM 3d printer like the Ender 3. There are variants with square and round bases.…
“CM3588 NAS Case Desktop Standalone” - pretty much this.
A cold-blooded bipedal reptile. Suitable for 28mm tabletop games. Created so that it does not need any supports and prints well on a cheap FDM 3d printer like the Ender 3. There are variants with square and round bases. NOTE The cameleon…
Here is a 3D model of Captain America. The base model is from the cadnav website ( http://www.cadnav.com/3d-models/model-45311.html ). It was in a 3D Studio Max file format (MAX) that i exported to STL. I modified the model in ZBrush to…
An Orc scout. Suitable for 28mm tabletop games. . Created so that it does not need any supports and prints well on a cheap FDM 3d printer like the Ender 3. There are variants with square and round bases. NOTE The other minis in the photos…
Orc looter with spear Suitable for 28mm tabletop games. Created so that it does not need any supports and prints well on a cheap FDM 3d printer like the Ender 3. There are variants with square and round bases. NOTE The orc shaman seen in…
A one-eyed fella. Bad at judging distance. Suitable for 28mm tabletop games. Created so that it does not need any supports and prints well on a cheap FDM 3d printer like the Ender 3. NOTE Other models seen in the images are available on…
