Counting matching models…
PG11 threaded blind stuffing to close unused PG11-openings in housings. [1] Thread type: PG thread [2] Diameters for PG11 opening: a) threaded hole: 17.3mm / PG thread b) drill hole without thread: 18.6mm [3] Sealing: An optional…
Print approx. €0.48–€0.59 excl. taxPreliminary estimate for PETGSource material: PET
This tripod foot is meant to be an improvement over the Losmandy Tripod Foot, which does not stay attached to the tripod during transit. This new design fits into the open bottom of the leg extrusion, friction fit, so that it stays with…
Print approx. €3.21–€3.93 excl. taxPreliminary estimate for PETGSource material: PET
This is a cover of DEC transmission axes for the Losmandy G11T equatorial mount after changing the transmission method via pulley. Losmandy mounts are all well designed for easy service & maintenance. The original design between worm gear…
Print approx. €2.08–€2.54 excl. taxPreliminary estimate for PETGSource material: PET
This is a cover of RA transmission axes for the Losmandy G11T equatorial mount after changing the transmission method via pulley. Losmandy mounts are all well designed for easy service & maintenance. The original design between worm gear…
Print approx. €4.14–€5.06 excl. taxPreliminary estimate for PETGSource material: PET
As requested. A Mini-13 version of the IG 11 Assassin Droid. The parts below are all that are needed to convert a Mini 13 Armature into an IG11. I recommend printing the head at .12 layering to get best details. The Chest Piece can be…
NOTE: I do not own one of these switches and designed based on provided measurements. If you own one of these switches please provide feedback on fit. 1. Non-printed Parts Required (4) Server rack Cage nuts (4) M6 x 14mm (or longer)…
Gâche de galet pour remplacer une pièce cassée qui ne se trouve plus dans le commerce. Modèle GIMM G1165. Imprimé en PETG mais serait sans doute plus solide en ABS/ASA.
I have changed the way that it mount to this part that I have designed myself: https://www.printables.com/pl/model/810506-xiaomi-g11-vacum-cleaner-part-1
I have a drop ceiling in my hallway so I mounted my network equipment upside down on a piece of plywood. This switch seemed a bit heavy and I didn't trust the screws in the stock mounting slots to hold it up so I quickly made up this…
I have designed this part to fix my vacuum cleaner Xiaomi G11. Best fit with this model https://www.printables.com/pl/model/810504-xiaomi-g11-vacum-cleaner-part Support: Yes
Sometimes you need a larger cable gland than the PG7/M12 version everyone uses. If your using a premade CAN cable and do not want to repin or cut your cable then this is for you. PG11 is just slightly too small for the LDO Nitehawk Cable.…
It was created in TinkerCad.com so it is not 100% same size, but it will fit. There is small diference in this part on hinges, becasue my old parts were also broken, so I've designed it in another way, and you do not need to use old caps.…
Different types of adapters and nozzles for Xiaomi G11 Vacuum Cleaner Update: there is alternative version of the adapter with axis made of filament Update: added gen2 of my nozzle with spikes because my wife love them Update: Added…
A 19" rackmount bracket for the TP-Link TL-SG116 (and TL-SG116P PoE) Switch A few tweaks to the original to refine the model. Notably: Section lengths adjusted to be more evenly sized Now easily fits on an Ender 3 V2 bed Provides more…
Since I had some PG11 cable glands lying around (you can get them easily from a hardware store), I designed this roof entry for solar cables. Material: PCTG Infill: 100% Supports: Tree
This is a magazine release button guard for the Novritsch SSG11. It reduces the chances of you dropping your magazine when holding your rifle, as the button protrudes and is easily pressed on accident. Print right side up with supports. A…
A reproduction designed for anycubic vyper printer therefore in 5 distinct parts, it is not perfect but a good starting point for a homemade replica. I worked the file starting from a 1/6 scale reproduction. In the photo the handle has a…
This is a extra -extended handguard extension for the Novritsch SSG11. It reuses your existing mounting hardware, and wraps around the barrel for a secure fit. Print with the screw holes facing up. Mirror for the opposite side. Print as a…
I couldn't find a model for this so had a go at creating one myself and thought I'd share for anyone else to use. This is a fairly simple slide-in holder for the Xiaomi/Aqara Button to attach to the Honeycomb Storage Wall. I have the…
A spare part to replace the broken foot of a Logitech G11 keyboard
A simple camera ring that replaces the one that comes with the camera (original part name is RAK-DC2) Prints without support if model is flipped upside-down. My settings for Bambulab: Quality: Wall generator: Arachne Strength: Wall loops:…
I found Andrew's design quite useful as it rigidly fixates the switch, even when (un-)plugging ethernet cables. The present design has openings for better ventilation, since the original design was blocking the vent holes present in my…
A 19" rackmount bracket for the TP-Link TL-SG116 (and TL-SG116P PoE) Switch 40mm center shifted
The original model fits perfectly, thank you @tokyo2ooo I added fillets to optimize printability. Additionally I made the model 120mm long to fit my needs. I recommend printing the holder upright with a lot of walls for best results.
I created this filter adapter because I recently converted my old Canon G12 to view full spectrum light (using this tutorial: https://www.lifepixel.com/tutorials/infrared-diy-tutorials/canon-powershot-g12-ir ) I did not want to fully…
Remix of Mauxx91 's Umbilical cable cover to add compatibility for PG9 or PG11 cable glands
Print the model in your desired filament making sure that u have enough walls/top/bottom and infill to withstand the weight of the laptop. Print the base in TPU and if your printer is well calibrated the base will fit the stand snuggly…
RC CAR SG116 body shell support. For ultimate strength it's better to print with at least 70% infill.
The mounting brackets have 5mm holes for screws. The tenda switch has the following dimensions: - Width: 101 mm - Length: 100 mm - Height: 26,5 mm Happy printing and mounting :)
Got an old Tamiya Vanquish recently and the only part that was seriously damaged has been G11. Quickly found out that this part is know to break, so I decided to improve it and make it 3D printable. I removed the holder for the resistor…
If you're also waiting for the SSG11 skeletonized stock grip panels to mount your split bipod, or anything with M-LOK, you can print these panels as a temporary solution. They're of course not as stiff as the original CNC ones, but at…
I modified the original version so it doesnt block as much of the notebooks air outlet
This is a grip panel compatible with the Novritsch SSG11! It lets you add MLOK compatible accessories to your airsoft rifle. Print with the screw holes facing up. Mirror for the opposite side. Print as a set. Ironing is optional if you…
Almost all the commercially available rack mounting solutions expose the front of the unit, whereas all the useful stuff is in the rear (except for the status LED, but that works only with the original OS, so I don't care). That's why I…
Einfacher Wandhalter für den Aqara WXKG11LM Zigbee Mini Wireless Switch Ich habe hier eine einfachen, schnell zu druckenden Halter für einen Aqara WXKG11LM Zigbee Mini Wireless Switch entworfen. Er wird mit zwei Senkkopfschraube an der…
I couldn't find the original shower door guide online so I made one myself. Other guides I see doesn't have their clip edge angled unlike this one. The original guide has its model number g1110 engraved on it. The model is shown…
My 16 port switch was too wide to fit in the 10" rack but this seemed like a good compromise. I've included the FreeCAD file - it's a mess but hopefully it's easier to tweak that than to start fresh if you want to adapt to your own switch.
PG11 Cable Gland 90 deegree adapter. Printed with PETG. Slower speed for better quality. Quality -0.16mm Infill - Hexagon or Grid 30% 3 Walls. Print Orientation - Inside Thread facing UP.
This is an Ammunition Box for 7,5x55 swiss rounds, it holds 36 pcs.
A little piece to enable attachment of stuff to the Well G11 airsoft gun. Including the Fusion 360 file to enable customisation. The thread on the Well G11 or Well G11-A1 airsoft gun is very weird. Some websites say "CW 28mm", some say…
This is a housing for 2G11 Connector. 2 parts sandwiches 2G11 light bulb with 2 pcs M3*20mm cup head (hex) screws. Cables are single core copper ones stripped around 12mm at the end, connector springs (copper connector inside) are…
stack 3 to store effectively. change infill/walls to modify flex
Picatinny Rail Barrel Extension for the Well G11 airsoft gun. There's no ability to mount a sight or light or laser or anything on one, this gives the ability to do so. The Well G11 has a weird propriety rail. This should do the job. Two…
Fun item for making a can fit on the end of a friend's Well G11-A1 airsoft gun. The thread on the Well G11-A1 airsoft gun is very weird. Some websites say "CW 28mm", some say "Dx 28mm", some say "dextro-gyrate 28mm", which all don't seem…
I used SBS filament for printing this, and it print more quality, than it been printed from PETg before.
Made it for my YK4106 Pro/FMS FCX10/Absima Wolf and FlySky MG11 radios (FS-MG11-BS, FS-MG11-BT-BS). I can barely reach the steering wheel with my thumb so I made this little adapter. 29-03-2026 : added a thicker version for a easier reach…
Remix of @Ozpyn's XG125 Rackmount ears to fit the XG115
This is my first model. I wanted to create an AC remote holder that I could stick on the wall next to the AC units. This remote seems to be used for a bunch of different units, but the model number should be DG11J1-72.
Print face down with standard infills for your printer. Universal fit. Rigidity comes from metal 5.25 filtered covers and epoxy tack points (semi-circle locations to place epoxy drops for permanent attachment).
FlySky FS-G11P Thumb Wheel System Requirements: 1x M3 countersink ± 10 mm (lock ring) 2x M3 screws to adjust/reduce angle as required (Make sure the screws are nicely flat where they touch the angle bar) !Recalibrate after any…
a coverplate for the jack of a yamaha eg112 stratocaster.
Xiaomi Vacuum G11 Accesory holder. Additional accesories in my collection.
I am apart of a club that has this microphone attached currently to the ceiling with pushpins and rubber-bands so I needed something to hold it better. This is just a quick 20 min build. I tool the mic and measured and made something to…
A lens cap that connects to the accessory mount on either the Canon Powershot G10, G11, or the G12. Has that satisfying click when you put it on, and prevents any forms of life or objects from penetrating their way through the protecting…
Bumper mounting part for front and back bumper for RC car SG116 PRO/SCY 16101
Replacement part FERCO G1153 Recommand to print in NYLON or ABS. Printed in PETG work fine. Print Settings Printer: PRUSA I3 MK4 Rafts: No Supports: No Resolution: 0,2mm Infill: 100% Filament: GIANTARM PETG White
A quick remix from this SR25 adapter as I liked the bb retention of it . I did print the SR25 version and it worked very well! It's a quick rough remix so some side could have more polish but it works soooo xD Tested with SSG11 Novritsch…
Simplified model of: https://www.printables.com/model/1513148-tp-link-tl-sg116e-wall-mount-brackets
Unterlage als Ersatz für die total ausgehärtete Original des schönen, nostalgischen alten automatischen Plattenspielers aus Omas Zeiten.
I added a hole to the right part of the holder, so I can push some cables through it
No hardware needed, designed to be press fit onto the existing TDC. Some force will be required, maybe light hammering. + & - indicators will require an AMS, but can be removed for non-ams printers. Only use PETG. IMPORTANT: select .12mm…
This thing got to me broken and i modeled it for 3D printing a replacement. No idea what it is. "g11" was written on it.
A simple driver to help screw in cable glances while applying pressure on it. The pressure is very useful when the threads you 3d printed are a bit too tight for you to screw the cable glance in them using a wrench.
SG116MAX replacement inner wheel with added material to account for weaker filaments.
If you find my designs useful, please consider sending a tip This upload is affected by Thingiverse's Download All Files 404 bug, download the files separately here: https://www.thingiverse.com/thing:5141043/files The original power lead…
This is a tuck-in motor modification for the classical Losmandy G11 equatorial mount. Losmandy mounts are all well designed for easy service & maintenance. However, for those vintage mounts, their servo motors are extruding outwardly and…
Wall mount for the Tenda TEG1105PD. Made up of two prints, the wall mount and the cover. Has 4 countersunk screw holes in the wall mount to attach to the wall. Then, the cover uses 2 M3 15mm screws from the side to secure the cover to the…
High-detail 3D printable model of Call of Duty Black Ops 1 G11 prop file. Designed as a display prop or cosplay-style replica. Includes a single-color STL, a Bambu Studio multicolor 3MF, and a color/source GLB. Review scale, orientation,…
Losmandy sold the 12288-tick line encoder many years ago, however, there were no covers to protect the encoder pinout & connecting adapter. Here is a cover for such vintage 12288 tick encoders. Note: some modified versions, TypeA & TypeB,…
This is a dial guard for the Baofeng G11S GMRS hand held radio. Print as oriented. I printed in TPU with default settings and glued in place with thick/gap filling super glue. This is designed to have space for gloves as well to actuate…
Miałem ostatnio problem z mocowaniem switcha TP-Link TL-SG116 po wymianie okablowania na CAT 6a S/FTP - nie podobało mi się jak te przewody się układają. Pierwotnie miałem switch zamontowany pod szafką 19" na magnesach neodymowych które…
The mounting brackets have 5mm holes for screws. The tenda switch has the following dimensions: - Width: 101 mm - Length: 100 mm - Height: 26,5 mm Happy printing and mounting :)
Made it for my YK4106 Pro/FMS FCX10/Absima Wolf and FlySky MG11 radios (FS-MG11-BS, FS-MG11-BT-BS). I can barely reach the steering wheel with my thumb so I made this little adapter. 29-03-2026 : added a thicker version for a easier reach…
I found Andrew's design quite useful as it rigidly fixates the switch, even when (un-)plugging ethernet cables. The present design has openings for better ventilation, since the original design was blocking the vent holes present in my…
FlySky FS-G11P Thumb Wheel System Requirements: 1x M3 countersink ± 10 mm (lock ring) 2x M3 screws to adjust/reduce angle as required (Make sure the screws are nicely flat where they touch the angle bar) !Recalibrate after any…
Simplified model of: https://www.printables.com/model/1513148-tp-link-tl-sg116e-wall-mount-brackets
If you're also waiting for the SSG11 skeletonized stock grip panels to mount your split bipod, or anything with M-LOK, you can print these panels as a temporary solution. They're of course not as stiff as the original CNC ones, but at…
This is a grip panel compatible with the Novritsch SSG11! It lets you add MLOK compatible accessories to your airsoft rifle. Print with the screw holes facing up. Mirror for the opposite side. Print as a set. Ironing is optional if you…
This is a magazine release button guard for the Novritsch SSG11. It reduces the chances of you dropping your magazine when holding your rifle, as the button protrudes and is easily pressed on accident. Print right side up with supports. A…
This is a extra -extended handguard extension for the Novritsch SSG11. It reuses your existing mounting hardware, and wraps around the barrel for a secure fit. Print with the screw holes facing up. Mirror for the opposite side. Print as a…
The original model fits perfectly, thank you @tokyo2ooo I added fillets to optimize printability. Additionally I made the model 120mm long to fit my needs. I recommend printing the holder upright with a lot of walls for best results.
I modified the original version so it doesnt block as much of the notebooks air outlet
I added a hole to the right part of the holder, so I can push some cables through it
SG116MAX replacement inner wheel with added material to account for weaker filaments.
![TP-Link TL-SG116[P] Switch 19" Rackmount Refined](https://media.printables.com/media/prints/1021334/images/7887405_3fda38da-970a-49b7-aa70-83109d4b464d_811f64f1-aaa8-45e8-ab1f-f10d4ae08c63/img_20241014_235535.jpg)
![TP-Link TL-SG116[P] Switch 19" Rackmount (shifted center)](https://media.printables.com/media/prints/1162758/images/8893111_769f4876-7940-480e-995e-acf8fd31bc87_1c334e58-7a38-4f45-964a-61325f65f544/photo_1_2025-02-08_00-56-29.jpg)
![Halter Aqara WXKG11LM Zigbee Mini Wireless Switch [Holder Aqara WXKG11LM Zigbee Mini Wireless Switch]](https://media.printables.com/media/prints/629250/images/4985925_bc401d80-b674-4262-9913-e8fd66ddd3b7_d60c2b1b-06e9-45fd-b1c2-ca05009e8dc3/img_20231028_141335.jpg)
![TP-Link TL-SG116[P] Switch 19" Rackmount (shifted center) remix with hole](https://media.printables.com/media/prints/fd2a13e1-392e-4bf4-87b7-c478b1b7422f/images/12700396_673da28b-48e7-4570-95c2-6345e62b89a9_c0aab716-a0ab-499c-b6b0-b0ff3767fb96/img_7462-kopie.jpeg)
