822 models
Summary This is a nozzle wiper for the Prusa CORE One which mounts to the gantry. This allows for wiping the nozzle at any point during a print. The installation is toolless and easily reversable. This was inspired by the Nozzle Wiper V2…
Print approx. €0.76–€0.93 excl. taxPreliminary estimate for one variant
Summary This is a nozzle primer for the Prusa CORE One which mounts to the gantry. This allows for nozzle priming/purging at any point during a print. It removes the need to have any priming or purging directly onto the build plate. The…
Print approx. €0.68–€0.83 excl. taxPreliminary estimate for one variant
I build this gantry to check the righ Extruder Rotation in your printer
Print approx. €2.18–€2.67 excl. taxPreliminary estimate for PETGSource material: PET
Use this if you want to do a z-transpose of a Z-chain you got from an LDO Rev D Voron 2.4 kit, and want the chain to sit flush and level, without any bending of the chain.
Print approx. €0.63–€0.77 excl. taxPreliminary estimate for one variant
To be printed flat on bed, without supports. V3 untested.
Print approx. €0.64–€0.78 excl. taxPreliminary estimate for one variant
As Ender 3 v3 SE/KE has a rather unstable structure, the additional weight placed on top makes it even worst. I designed a handle to transfer the filament to the bottom of the printer. As a result, the prints are noticeably higher…
UPD: JAN - added models without led bar, without screen (for regular and hidden bolts) Hello community! Like many of you, I was shocked by the weakness of the frame and made some attempts to fix it. Adding dampers under the printer -…
I recently came across another Creality owner that had noticed his gantry was off axis, this will off course cause some serious layer shifting on bigger prints. Upon checking myself (I used the PEI sheet that comes along with the printer…
Summary In an attempt to reduce ghosting on prints, especially evident when printing at high speed, I have design a fully printed gantry support. The support mounts to the gantry and base using existing screws (no modification to the…
This is an adjustable gantry mounted nozzle parking spot and brush for Vorons (2.4 & Trident) using bambu lab's silicone wiper. New Version! Now made more modular and using high temperature silicone RTV to further improve nozzle heat…
“The Rook” This is a Quick way to check your X-Axis Gantry is parallel with bed. And adjust Z-Axis rods to get them back in sync. The Rook was designed to be a quick and easy way to get your gantry back parallel to bed when it's knocked…
This model is a specially designed X Carriage Leveling Support for Elegoo Neptune 4 Pro 3D printers. It is crafted with the purpose of ensuring accurate leveling on the Z-axis. Mounted under the X-axis carriage, this support provides…
For all information and recent models look at https://www.thingiverse.com/thing:6516352 .
X gantry model I recreated of the Ender 3/pro/3v2/CR10 (v1) Holes are perfectly aligned, I then used this to design shrouds (like the MarsOrbiter, SaturnOrbiter and ApolloLander, of which I never received any complaints regarding mounting…
V Slot Gantry Plate for 2020 extrusion with 5mm holes. Print Settings Printer: HACKER XI Rafts: No Supports: No Resolution: 0.2 Infill: 40 Filament: self made PLA 1.75 Gray Notes: V Slot Gantry Plate for 2020 extrusion. stl of V slot…
I made this little clip for extra support for the original Side Spool Holder since without it it tends to bend after a couple weeks. Works with: https://www.printables.com/model/776235-ender-3-v3-seke-side-spool-holder-less-gantry-wobb…
A helpful tool to get the gantry aligned in a dual-Z configuration. Put printed tools on both sides of the gantry Disable steppers Move hotend to the middle of the printing area to avoid collision Manually, simultanously rotate both Z…
I have added the Extruder Main body and the Blade holder for KB4-F_5 Blade We highly recommend this Blade since is more reliable/ durable/ thick and it sharp! be careful! We have switched to a better Blade…
I had an issue like many other with the X gantry on my neptune 4 max got out of wack from shipping. This will help you to realign the X gantry.
This is a gantry installation hook for voron 2.4. It fits to 2020 extrusions and helps lifting up the gantry to the frame easy. The hook is 12cm long. The lower part is 6mm thick and fits into the extrusion. The upper part has a 2cm wide…
To assemble you need a M3x8 Screw and an M3 Insert. Update: new File “topRound” for those who wants to try it out. (request from comments) Disassembly instruction: https://www.ifixit.com/Guide/Logitech+C920+Webcam+Disassembly/115077
3D printed arms for holding gantry level and in place. 4 avalible versions spanning from 100mm to 250mm Its recommended to print 2 arms per side totaling 6 arms for Voron 2.4 gantry Lower end of the arm is 3mm wider so it does not touch…
Voron 2.4 / trident 9mm belt gantry u'll need to think 8-10mm longer on every bolt. been using this on my 8 machines for a year now…time to share you need 12 695 bearings and if you dont use f695 as idlers in XY joints closest to print…
UPDATE: Please check out the SATURN V - COLBY CRANE by ChristineZ_42 https://www.thingiverse.com/thing:4222791 for a highly detailed replacement for the gantry crane!! The Saturn V (spoken as "Saturn five") was an American human-rated…
🧰 Overview SV08 Gantry v2 brings a cleaner, more precise CoreXY experience: Front-access belt tensioning for the AB motors (Voron-style) Aligned pulleys at the XY joints for parallel belt paths Easier setup & maintenance with more travel…
I just modded the XY Joiner for the Gantry to fit MGN12H Rails instead of MGN9C. WHY? Cause i don't have 9C Linear Rails in stock :) Just the lower part has to be changed, upper joiners still stock. Print Settings Supports: No Resolution:…
Got tired of looking for my Cutters every spool change… Now I got a spot for them I can't miss.
Display holder for Creality Ender-3 V3 SE or KE (with 2 pins). Remix for the gantry support (right bottom part).
A K1 and K1 Max full gantry redesign utilizing flanged bearings in place of the low quality factory idlers.
Put some motion in your build with a precision milled gantry plate designed for any 20mm side of V-Slot Linear Rail.
I made this model because I didn't like my umbilical going to the A drive bracket as it was too close to my Z belt, and meant I needed a longer wire run. The other reason was so that I could remove my remaining Z cable chain and simply…
Our universal gantry plate is suitable for many build designs. 3D printing extruders, diode lasers, plasma heads are just some of the possibilities.
Revision 1: 2025-11-15 Revise Amazon links per currently available items Reflect Happy Hare's incorporation of Filamentrix's Filament Cutter into its code base Introduction The Voron 2.4R2 with Happy Hare provides a means to cut off the…
This is unofficial, not needed for a functional LowRider 4, and offers primarily cosmetic (aesthetic) benefit (for the most part; the “tie downs” do have some zip tie slots that could be used to help with wrangling wires, and the back…
The motormounts in the photo are slightly different, they are the old version. The attached files contain all models of the current version at the time of publication.
Ender 3 v3 SE KE Z Gantry support Without drilling+ Raise the screen
12.02.2023. sapphire new version v3 finally go time to print all parts, not just virtually check in fusion 360. Now one of last version 3 is out and belts finally are parallel. p.s. Some printers can be different sizes, gen1, gen3, and…
📢 Note about this Gantry We’re not deleting this version — it will remain available for those who already use it and may need to reprint or replace parts. 👉 A new gantry repo is now live with major improvements: New CoreXY belt tensioning…
Support All my designs and mods on Printables are free to use and remix. They have a non-commercial license. If you enjoy this or any of my other designs you can send me a small donation using the link below. Thanks :)…
This is a pair of "legs" that will hold the x-gantry perfectly level while you adjust it. This video from Alex Kenis will show how it can be used instead of the CD cases he uses. You don't need it, but I used the knob, an m3 bolt and…
I've constructed a gantrymount for the Ender 3 S1 cable chain to fit the chain to the Ender 3 V2 equipped with the Extruder from the S1. The amount of printed chain parts you need are the same(41x) . If it is to tight for you you can…
I've had some tough times getting the sidewinder x2 fully tuned. This helps so much with getting everything to run smoothly. Instructions Follow Ethereal Project 3D 's instructions in this video. Squaring the gantry on the Sidewinder X1…
Unchanged and added for the kit: higher_tensioner_spacer, interbearing-washer, lower_tensioner_spacer. The X-axis carriage is based on a CAD model from Henlor -https://makerworld.com/en/models/171995 The X-axis carriage with an oval hole…
A small gantry crane for loading Brio/Ikea compatible trucks and trains. A 9mm x3mm round magnet is required, a small quantity of glue, as well as 8 M3 screws. Also feel free to check out my other train related items: Swerving Track for…
A gantry plate for 3 roller wheels that fits on a 40mm wide v-slot aluminum extrusion. For a full assembly you need: 3 roller wheels with 24mm diameter 1 eccentric nut ID 5mm that fits in a 7mm hole 2 spacers ID 5mm 3 fasteners M5x28 or…
This includes only the bottom right bracket modified to fit the KE's Nebula Pad screen in horizontal position which is required when running GuppyScreen Thanks to Alexey for the original Gantry support design Please visit his model for…
I wanted to mount my umbilical to my gantry. It seemed like the best way to minimize its run length and avoid getting it caught in my z-chain. I couldn't find an existing STL, so I hacked this together. It's not a work of beauty, but it's…
I will listen to your suggestions for criticism. The left side is represented. The right can be mirrored in the slicer.
CAD and diagrams for the X-gantry bracket that mounts to the MGN12C rail from the official Creality Ender 3 linear guide rail kit (https://store.creality.com/products/linear-guide-rail-kit). This model is not intended to be printed . It…
This is a replacement bed-gantry for the Kobra S1 designed to be laser cut from 4mm construction steel (st37 for example). (This is tested) Big thank you to Motion on the Rinhals Discord for all his work on this! EXTRA parts needed: 6x…
After I upgraded my Ender 3 Pro extruder to a Micro Swiss Direct Drive, cable management became an issue. Thus, I decided to embed all cables from the extruder into a cable chain and lead them to the rear-box, where the controller board…
ODYSEE: https://odysee.com/@EagleEyeDesigns:3?r=HiDpndZYDHaC5ke7vqSmKNZrnmZgzf61 INSTALLATION: (Bottom/2020 Aluminum Extrusion/Top/Secure) M5/Sliding V-Slot - Pre install hardware to all mounts for 2020 aluminum extrusion Attach Bottom…
Fully 3D printed Gantry for the SV08 MAX Note you can use this also with the stock motors but you will not put the extra bearings to support the shaft! ✅ What’s New This is the double shear variant of the SV08 MAX Front-access belt…
This is an upgrade to my previous mod to eliminate the aluminium extrusion from the x-gantry. You can run with just a single rail or with 2 rails screwed together by aluminium blocks. A single rail can save a lot of weight, while also…
This Camera Mount attaches your Webcam to the X Gantry! The “NebulaScrew” is needed anyway - and regarding the "NebulaMount" there are a few different versions: X4 Short (50mm “arm” length - camera gets blocked by extruder while homing)…
Lets save our K1s :-) This is my linear conversion for X axis. Every version i found was complete makeover. Not this one. This is cost effective coz you reuse most of your stock hardware. Designed for STOCK or POWGE idlers. No software…
A wide stance capable of housing up to 6 wheels creating an extremely stable gantry. A key component in Belt and Pinion as well as Lead Screw transmissions. Recessed holes for professional flush mounts. Tapped holes included to facilitate…
A clip to support the Ender 3 V2 Neo's x gantry to prevent it sliding down when stepper motors are turned off, and especially when the nozzle is hot or cooling down, such as when a print finishes. There are “better” solutions out there to…
Replacement cable cover with support for pg7 cable glands and passthrough for endstop switches
Use this to “square” the X axis to the Y axis of a Bambu X1C. it goes on the carbon rods during the belt tension process and can equalize the distance to the rear of the printer. I put Square in quotes, since it really just makes the…
This is for a 5015 fan on the stock K1. Because of the size of a 5015 blower, it's really difficult to get it to fit without limiting the travel of your printhead. This cooler fits with a minor modification: YOU MUST REMOVE THE CANBUS…
The original model didn't seem to have the connector to the gantry, so i fixed that As well as the end links could not bend due to the square corners, so i made a rounded piece. Instructions: Print out the short drag chain connector SV08…
Clips on the Gantry, Prints in 2 pieces, there are 2 ‘keys’ one is slightly larger, find the one that fits best and press the 2 halves together over the key. if you print with supports, they will go into the keyhole, but they do dig out…
Bei meinem Elegoo Centauri Carbon habe ich ein deutlich sichtbares 2-mm-Wellenmuster festgestellt, verursacht durch die glatten Umlenkrollen der XY-Gantry . Der GT2-Riemen rutscht dort über die Rollen, und das wiederholt sich als Ripple…
This tool is meant to help you align the x gantry of your Elegoo Neptune 4 Plus. I dirty remixed @JungleG1337_290793 's design and removed a small section to fit the screw next to the x gantry. Original was for the Max and didn't sit…
Used for checking alignment on both sides of X gantry made for the VzBot CoreXY 3D Printer Tension belts on both sides until linear rail lines up with aligner
1 Introduction This model introduces the VzBoT-Vz330 gantry to the Flying Bear Reborn 2. It enables the usage of the Vz-Printhead without changes. Key Features 180° rotated Vz330 - 2WD setup Support of the Vz-Printhead without further…
The Voron 2.4 AWD Gantry introduces a groundbreaking design that sets it apart from other all-wheel-drive (AWD) systems available in the market. Here’s what makes it unique. 1. Shorter Belt Paths for Greater Efficiency: Unlike other…
I separated the files, to make printing easier. And, I also edited one of the files, to make the Tie Figher fit better. ORIGINAL FILE: https://www.thingiverse.com/thing:3035408
I used tinkercad https://www.tinkercad.com/things/jBSvvRhF06K-ender-upper-gantry-cable-guide-with-cable-spline to add a cable spine to the Upper Gantry Cable Guide v3 when combined with the Ender 3 V3 SE Spine cable Clamp to Spine…
Accommodates up to 4 mini v wheels. Easily configured to station wheels inside C-Beam Linear Rail track for a compact gantry cart footprint. Alternate the mounting on slimmer V-Slot Linear Rail to position wheels on the outermost portion…
The Full Frontal Gantry mod for all models of Rat Rig V-Core 3 and 4 printers, other than IDEX. Compatibility: V Core 3 and 3.1 V-Core 3.2h (Rat Rig's hybrid upgrade) V-Core 3.5 Hybrid (MFBS hybrid upgrade) V-Core 4/4.1 V-Core 4/4.1…
Reinforcement plate for the left bottom bracket. The plate is fixed on the inside of the machine chassis and should be used together with the mod “Ender 3 V3 SE KE Gantry support”:…
UPDATE: Guys, please don't bother with these. I've spent a long time testing them and can confidently say they make absolutely no difference. The 3V3 frame is quite strong. It MIGHT be useful if you have a very wobbly setup or other…
This aims to improve print quality at higher accelerations on The 100 based printers that have larger build volumes. While the printed parts are now actually ~0.7g lighter than the v1.1 gantry according to the slicer, and the M5 bolts…
Gantry crane. Downscaled from N scale. Prints easily and assembled using CA glue.
UPDATE 4/28/2019 So after some more time and much learning, I have made some minor tweaks for better results using different nozzle diameters. Now I have added two different heights for even layering with a given nozzle diameter. 111mm…
For VZBot printhead or cnc version you dot need do any changes, but for Sapphire Plus 3D printer you need make some chages. All top cover need turn 180 degree around, my was from factory all ready bend and im not using it. Motor holders…
I fabricated a crane/boom out of 4040 extrusion. I needed a part that housed 4 x v-slot bearings to work as a sliding gantry allowing for straps to be attached. I designed and printed two (2) of these parts and joined them with a length…
The Voron 2.4 AWD Gantry introduces a groundbreaking design that sets it apart from other all-wheel-drive (AWD) systems available in the market. Here’s what makes it unique. 1. Shorter Belt Paths for Greater Efficiency: Unlike other…
I have filament clips for my spools but when I just want to switch back and forth between colors on a print I need a quick way to hold the filament while I do that. This gantry/top rail mounted clip does that. Its a quick print, very easy…
Here is my design for mounting a carbon square tube and MGN9H rails on RatRig Vcore-3. This also solves some issues while tightening XY joiner plates and pulleys/idlers alignement. Note1: New XY joiners can be used on it’s own with…
Vitalii CNC Aluminum Gantry Z-Chain/Endstop Mount/PG 12 gland
Print 2 to put on both sides of the Gantry This will assist you to ensure the gantry is parallel to frame Tested on both Odin F5 and Sovol SV01 Pro Print
Overview This is the double shear variant of the SV08 Gantry v2 . The only parts that differ are the upper AB motor mounts . 👉 If you already have the standard gantry v2 installed, you only need to print and replace these parts. 👉 The…
I really liked this X axis camera mount and made a few changes First I added a little hood to push the flex-cable out towards the back so the cable would be oriented properly as the gantry moved up and down I added a notch on the case and…
I remixed the SV06 Z Axis leveling tool (Align) from SavageLau as it was too short to work on my SV06 plus. It now would work on both the SV06 and SV06 plus as it is 50mm long. And will also still fit in the holder designed by another…
Unfortunately I sold my ender 6 before I was able to test and finalize this system, but by popular demand, here it is: The Ender 6 Voron Gantry Conversion: This System should be able to be mounted to the existing frame of the Creality…
This is a modified version of the of the AB Stepper Holder that CN3D release. For easier printing. I split the lower section heated insert section to be a separate section. This allows the lower to be printed without any supports and have…
Update 2023/2/6: Beefier left gantry to reduce the possibility of the rail twisting. Requires a 425mm long MGN12 rail. Update 2022/12/26: Improved Y-Axis Limit Switch Mount. Update 2022/12/11: Minor tweaks to improve printability such as…
Note: Several of my designs (and remixes) for my CNC plasma rig are available here for free, and several others are exclusively for my supporters on Patreon that support for any amount, even if only a dollar a month.…
…Please be sure to hit like & post a make, I'd love to see your prints! The Vortex series grows with Gemini! Print faster with crisper cleaner looking prints! These lightweight mirrored modular pods each carry a powerful 24v 6020 fan that…
Sovol SV08 - Nylon gantry cable mod Usually the gantry wires often get in the way, especially on higher prints as shown in the video and sometimes they seem to get even caught by the gantry… So not ideal if you don't want to babysit this…
Work in progress of the Reverse mounted gantry for Bondtech Indx and Voron V2/Micron2020 recommended to use BFI front idlers if you use this setup you need to replace the rear extrusion with a piece of 1515 BOM In addition to stock v2…
Designed for 20mm x 20mm box section tube often used for the x-axis gantry beam on corexy printers. Some tubes have relatively wide dimensional tolerances due, for example titanium tube might be 20mm +/- 0.3 mm - so anywhere from 19.7 to…
LowRider v4 CNC - Tie Downs to secure 24v Power Supply (AC-DC) to lower strut plate of gantry. This is the 24v power supply I purchased from Ryan at v1e.com … Print as oriented. No supported needed. I pre-drilled and used M3 screws, but…
Securely mount your ADXL345 sensor to your X-Gantry plate. Attach the mount using the fan shroud screw on the back of the gantry plate. I used two M3 screws with nuts to secure the sensor to the mount. Printed with PETG, 0.2 layer height…
Bearing conversion of the axle to reduce vibration. It works very wellIf you want to use a linear rail you have to use the XY joint from here. https://www.printables.com/de/model/855093-k1k1max-x-axis-linear-rail-remix/files
Voron Logitech C270 adjustable rear gantry mount. This requires a m3x8mm grub screw and two 4mm diamter springs. It installs onto the underside of the rearmost gantry 2020 rail using two M3 T slot nuts and two m3x8mm socket head cap screws.
Hazzah! Purpose and Theory: To redirect the absoutely insane amount of light bleed from my cheap light bar I purchased and help me from being blinded by the light if I wanna check my prints. This helps redirect the light on to the print…
![[unofficial] LowRider v4 DIY CNC, gantry back covers, hinged for opening, and can pop out and back in, plus "tie downs" for them, and an in-gantry Jackpot mount](https://media.printables.com/media/prints/1082723/images/8511977_a5e0de90-94c3-4d5d-bc49-49ef96756aa0_c23e00ce-a752-452e-ad76-fbb7a7535ca4/img_8848.jpeg)
