Counting matching models…
A Temperature Tower designed to find the correct temperature for your filament! The included .gcode is sliced using Simplify3D with the "Multiple Processes" tool to set the temperatures at different layer heights. Take a look at the…
Print approx. €2.34–€2.86 excl. taxPreliminary estimate for one variant
I use these mainly to close herb bags, but I've found they're handy for all sorts packs, like breakfast cereals, tea leaf bags, etc. The included 3MF has 10 of them. Just "right-click - Set number of instances" in PrusaSlicer to change…
Print approx. €0.11–€0.13 excl. taxPreliminary estimate for PETGSource material: PET
For the most up-to-date version of this design, check out the Makerworld version. It's the original threaded dragon egg, great for Easter egg hunts, gifts, and Game of Thrones fans. This is my made-from-scratch design from 2022 that has…
Print approx. €0.55–€0.67 excl. taxPreliminary estimate for one variant
Follow the Mikolas Zuza's tutorial article on: https://www.prusaprinters.org/cheap-simple-3d-printer-enclosure/ Plexiglass dimensions: 3pcs: 440 x 440 mm, thickness 3mm 2pcs: 220 x 440 mm, thickness 3mm If you have a 3D printer with MMU2S…
Print approx. €1.42–€1.73 excl. taxPreliminary estimate for PETGSource material: PET
A collection of 34 snowflakes with hanging loops for decoration purposes, a bit thick ones. They are all around 5 cm big. More 5 cm designs ↑ Link: 34 Snowflake silhouette collection ↑ Link: 34 Snowflake collection ↑ Link: 34 Snowflake…
Print approx. €1.12–€1.37 excl. taxPreliminary estimate for one variant
This is a model of the engine block made for the Original Prusa XL Five-Head.
Print approx. €11.03–€13.48 excl. taxPreliminary estimate for PETGSource material: PET
Minimalistic Dock for Apple Watch - version 2. Suitable for both USB-A and USB-C type chargers. Model was tested with genuine Apple chargers: plastic and metal one. Both have similar diameter which is 27.8mm and 27.7 mm, with the depth of…
Print approx. €1.51–€1.85 excl. taxPreliminary estimate for one variant
Hello. This is the R.E.P Ratchet tool. It stand for Rapid Prototyped, Exposed Design & Pocket Sized Hex Driver Bit Ratchet Tool. This is a fast and practical, printed ratcheting ¼" hex driver!!! It is HEAVY DUTY and tested, with an…
Print approx. €0.31–€0.38 excl. taxPreliminary estimate for one variant
A V8 engine block with a top part suitable for holding your business/name card. Test prints were made on a Prusa i3 MK3S and an Anycubic Kobra 2 from PLA with 0.2 mm layer height, 5 % infill density, 190 °C nozzle temperature and 65 °C…
Print approx. €22.85–€27.93 excl. taxPreliminary estimate for one variant
This stand will only work with Pixel Watch 1, for Pixel Watch 2 please use this stand: https://www.printables.com/model/615266-pixel-watch-2-charger-stand This stand includes a cutout to route the wire so it's not visible. For best…
Print approx. €3.83–€4.68 excl. taxPreliminary estimate for one variant
With this model you can test 6 different distances: 10mm 20mm 40mm 60mm 80mm 100mm Update 1: Added a Material Saving Variant (But this Variant is more fragile)
Print approx. €0.54–€0.67 excl. taxPreliminary estimate for one variant
With this jig you're able to cut insulation made from PE or PU in 45° angles. The model in the picture is made for 50mm insulations, although it looks a bit wide (the insulation seems to be smaller than indicated). But I also added…
Print approx. €3.49–€4.27 excl. taxPreliminary estimate for PETGSource material: PET
Christmas 2022 Update I changed the corners of the picatinnies to radii so they would print better. Also I adjusted the angle of the infill in order to get ultra smooth glide surfaces for the slider. Have fun! Watch the Beer Bottle Gun in…
Print approx. €0.88–€1.08 excl. taxPreliminary estimate for one variant
Also tested with other charging ports Inspired by the box openers
Print approx. €0.05–€0.06 excl. taxPreliminary estimate for PETGSource material: PET
Don't want to read all of this? There's now a tl;dr at the bottom of this document. Important Note Regarding Input Shaper: Before printing please see the Input Shaper section below for important notes regarding potential issues with input…
Print approx. €3.09–€3.77 excl. taxPreliminary estimate for PETGSource material: PET
See description over here: https://www.printables.com/model/39810-improved-all-in-one-temperature-and-bridging-tower This is a remix for Prusa Core One / Core One + / Core One L. 05.06.25 : Added MMU3 profile. 28.12.25 : Added optimized…
Print approx. €1.67–€2.04 excl. taxPreliminary estimate for one variant
Temperature Tower to find the correct temperature for your filament Print instruction Material: PLA Print resolution: 0,20 Bed 60°C First 10mm prints with 190°C then every 5mm the temperature increases by 5°C !warning! Watch the first few…
Print approx. €0.98–€1.19 excl. taxPreliminary estimate for one variant
See description over here: https://www.printables.com/model/39810-improved-all-in-one-temperature-and-bridging-tower This is a remix for Prusa MK4S with and without MMU3. 17th December - Add MMU3 PETG and PLA 23th November - Fix for…
Print approx. €1.59–€1.94 excl. taxPreliminary estimate for PETGSource material: PET
*** Thanks for checking out this model! *** If you appreciate what I'm doing, please consider buying me a coffee , and check out my other models ! ********** [ANNOUNCEMENT Oct 7, 2024] I just confirmed - the xRivet also fits the Original…
Print approx. €0.44–€0.54 excl. taxPreliminary estimate for PETGSource material: PET
Charging Stand for Pixel Watch 2 & 3 Easy to use with the original charging cable of the Pixel Watch 2 & 3 Note: you'll need to mirror the model for the left wrist, as I wear my watch on my right wrist. Print settings: 2 perimeter 0,2…
Print approx. €0.05–€0.07 excl. taxPreliminary estimate for PETGSource material: PET
Perníková chaloupka
Print approx. €0.22–€0.27 excl. taxPreliminary estimate for one variant
This is made for the new Google Pixel Watch 2 charger. This will not work with the first version Pixel charger. The insert for the charger puck is snug, press firm to seat the puck into the receiver so that it will be steady for placing…
Print approx. €3.05–€3.72 excl. taxPreliminary estimate for one variant
This filament buffer is placed between filament spool holders and Multi Material Upgrade for Original P313 MK3/S. Prevents tangling of returning filaments during color changes in multicolor prints. It can be placed on a table or mounted…
Print approx. €0.59–€0.72 excl. taxPreliminary estimate for PETGSource material: PET
Quick remix to hold the Pixel watch charger. Fredslund's original design was a perfect starting point for a functional and stylish place to charge your Pixel watch.
Print approx. €1.32–€1.61 excl. taxPreliminary estimate for PETGSource material: PET
Nothing/CMF watch 2 Pro charging dock/stand
Print approx. €3.75–€4.59 excl. taxPreliminary estimate for PETGSource material: PET
diameter : first circle:3mm second circle: 5mm square:4x4mm and last random shapes separated by 2mm the whole is 80x20x41mm (without a base 40mm)
Print approx. €0.89–€1.09 excl. taxPreliminary estimate for one variant
Summary This print made for a great first 5 tool multi-color/material test on my XL. Tools 1,2,4, and 5 are PLA, while tool 3 is TPU for most of the tubing. Printing Tip I struggled to get this to print properly because the back strut…
Print approx. €21.62–€26.42 excl. taxPreliminary estimate for one variant
This is a hanging mount for the Original MMU2(s) Filament Buffer. [PC4-M6 Version] Features: Quick & Easy to load Reuses most of the original parts Keeps the Buffer out of the way Clean simple filament path to the MMU2(s) (Prevents MMU…
Print approx. €9.91–€12.12 excl. taxPreliminary estimate for PETGSource material: PET
This Throttle goes along with my G1000 setup . Its main feature is the simple design and slim layout, which (unlike regular Throttle quadrants) fits on a desktop. Instead of rotary potentiometers and a clumsy gear mechanism, it uses 100mm…
Print approx. €0.23–€0.28 excl. taxPreliminary estimate for one variant
Allow your treasured handbag to take a break in style with our beautifully crafted Portable Purse Holder Hanger Hook. Perfectly designed for use on any table or surface, it keeps your purse handy and clean while enhancing the aesthetic of…
Print approx. €1.09–€1.33 excl. taxPreliminary estimate for one variant
Remixed the Advanced Filtration System Add-on Printable Parts to add a ducting and exhaust system that can be easily oriented to redirect airflow into or out of the enclosure Features Easy to print and to assemble All the printed parts…
Print approx. €2.90–€3.55 excl. taxPreliminary estimate for PETGSource material: PET
UPDATE: This model is now obsolete. You can find much improved/updated versions; The “Universal Version” (which fits the MK3/S/+, MK3.5, MK3.9 & MK4 printers) as well as the “MK4 Only” version here: Original Prusa Enclosure Precision Fit…
Print approx. €4.04–€4.94 excl. taxPreliminary estimate for PETGSource material: PET
This print is for a replacement disc for the disc shooters on some Fisher Price Imaginext toys. Compatible with the batbot. The discs are easily lost leading to upset children and frustrated parents. Its a fairly quick and easy print in…
Print approx. €0.34–€0.42 excl. taxPreliminary estimate for one variant
Inspired by the Valve Index Boomerang Charger and my lack of desk space. Thank you to Valve for sharing their Index CAD files. Make sure you have good layer adhesion and test the print, don't blame me for a dropped headset. The holder…
Print approx. €0.09–€0.12 excl. taxPreliminary estimate for one variant
It can hold heavy backpacks and for no additional cost; lightweight backpacks too. I'm sure if you tried you could even use it to hold your headphones. Have fun but don't get too carried away with this one. I did with the design, but hey,…
Print approx. €1.32–€1.61 excl. taxPreliminary estimate for one variant
When printing with 0.2 layer heights and z height at 100% (22mm) the color swaps are at 17.4mm (for base gingham color), 18.6mm (for white in gingham pattern), 19.8 (for the top pumpkin pattern lines), & 21.2mm (the stem color if…
Print approx. €4.56–€5.57 excl. taxPreliminary estimate for one variant
Charging station for Pixel Watch. For optimal hold on the table top best fix with double-sided tape. Print Settings Printer Brand: Prusa Printer: I3 MK3S Rafts: No Supports: No Resolution: 0.2 Infill: 20% Filament: Any PLA black Category:…
Print approx. €2.76–€3.37 excl. taxPreliminary estimate for one variant
During printing my Enclosure often starts wobbling especially while printing full surfaces. So I designed this support piece to stiffen the tables legs. Instead of most existing designes I wanted to optinize the approach for 3D printing.…
Print approx. €1.88–€2.30 excl. taxPreliminary estimate for one variant
You might want to look at my recent Adjustable Exhaust v3 Remixed the Advanced Filtration System Add-on Printable Parts to add a ducting and exhaust system that can be easily oriented to redirect airflow into or out of the enclosure…
Print approx. €0.55–€0.68 excl. taxPreliminary estimate for PETGSource material: PET
The Original Prusa Enclosure Mesh Side Boxes made by VisualReversal is an amazing item to add to your printers. Since the release of the MK4 these no longer appear to fix correctly. I made some slight adjustments so that this model…
Print approx. €6.41–€7.84 excl. taxPreliminary estimate for PETGSource material: PET
Overview These modular storage baskets have sort of a Voronoi appearance and are designed to be used with Velcro One-Wrap, allowing you to easily add more baskets and adjust their vertical spacing when hanging. Alternatively, there is a…
Print approx. €1.43–€1.74 excl. taxPreliminary estimate for one variant
Final release after more than 6 months of developing and testing! After a several month long beta process and countless improvements (especially of the auto-rewind mechanism) the complete EMMS works 100% reliable for month now. It took…
Print approx. €0.60–€0.73 excl. taxPreliminary estimate for PETGSource material: PET
A magnetic charging stand for the Playdate . It uses eight round 8mm x 1.5mm neodymium magnets for the corners (two for each) and four rectangular 5.75mm x 19mm x 1.75mm for the center. The magnets are connected to a standard 5v USB 2.0…
Print approx. €3.01–€3.68 excl. taxPreliminary estimate for one variant
This is a hanging mount for the Original MMU2(s) Filament Buffer. [PC4-M10 Version] Features: Quick & Easy to load Reuses most of the original parts Keeps the Buffer out of the way Clean simple filament path to the MMU2(s) (Prevents MMU…
Print approx. €8.65–€10.57 excl. taxPreliminary estimate for PETGSource material: PET
This all-in-one 3D printer calibration test is designed to evaluate and improve your FDM printer performance quickly and accurately. The model includes advanced tests for bridging, overhangs, dimensional accuracy, tolerances, bed…
Print approx. €2.34–€2.86 excl. taxPreliminary estimate for one variant
the original airpot comes with only 2 or 3 srews. if u need more u will find them here SCREW_v2 - is a lot stronger as the previous version if u place a M3x12-20mm screw inside - for use with a 13mm nut or a a coin - is part of another…
Print approx. €0.23–€0.28 excl. taxPreliminary estimate for PETGSource material: PET
Meet CUTE - C hristmas U nique T emplates E dition ⭐ Designed as 2 in 1 - cut your cookies with details or just an outline. Outer cutter has also beveled edges for easier cutting. Min. dough thickness for inner detail to be visible should…
Print approx. €1.05–€1.29 excl. taxPreliminary estimate for one variant
Give your phone some time to rest and recharge. Story Ever since I saw ThePhonePillow by HpInvent, I wanted to remix it into a wireless charging pillow. Alas, HpInvent's is using a very restrictive closed license, so I would not have been…
Print approx. €8.97–€10.96 excl. taxPreliminary estimate for PETGSource material: PET
I have a sheet holder on the right side and the LED stripe installed. Thus, created this remix which mounts on an additional vertical screw and is mirrored for left use. This remix is inspired by the LED stripe solution provided in this…
Print approx. €9.62–€11.76 excl. taxPreliminary estimate for PETGSource material: PET
Hanging Perfume Vile. Add your own chain.
Print approx. €5.81–€7.10 excl. taxPreliminary estimate for one variant
Quick to print and very cheap while having proper bed adhesion and a stringing distance of about 100mm. Note: If slicer settings like extrusion multiplier or temperature changes don't seem to change much, try using fresh filament or dry…
Print approx. €0.14–€0.17 excl. taxPreliminary estimate for PETGSource material: PET
This is an upper mount to attach the Wedge RMU Mk3 to the right side of the Original Prusa Enclosure. It uses the tool holder model for mounting. That uses: M3x8 screw (2x) See RMU Mk3 mount for Original Prusa Enclosure (lower) (…
Print approx. €1.52–€1.85 excl. taxPreliminary estimate for PETGSource material: PET
Simple asymmetric S-shaped hook. The inside curves are better suited for hanging from thinner rods. Use these to add hooks to a metal pantry or for the hanging of odds and ends in a closet. Print with: PLA 0.4 nozzle 0.2mm layer height 3…
Print approx. €0.81–€0.98 excl. taxPreliminary estimate for one variant
This is a servo connector compatible with the Skywing RC connector system. Designed to be printed in PETG with supports on "build plate only". Fits standard Servo connectors, i used the powerbox servo plugs and sockets. The connector…
Print approx. €0.55–€0.67 excl. taxPreliminary estimate for PETGSource material: PET
This is a lower mount to attach the Wedge RMU Mk3 to the right side of the Original Prusa Enclosure. It uses my Original Prusa Enclosure corner mount model ( https://www.printables.com/model/345660-original-prusa-enclosure-corner-mount/ )…
Print approx. €1.89–€2.31 excl. taxPreliminary estimate for PETGSource material: PET
An adapter that fits a (Phillips) vacuum cleaner to suck as much air as possible out of zip lock bags. the inner diameter of the adapter fits a 38mm vacuum cleaner nozzle. Print instructions i printed with the prusa speed 0.2 profile with…
Print approx. €2.15–€2.63 excl. taxPreliminary estimate for one variant
Kingdom Come-inspired OneBlade Stand Tower General Information The original charging cable is integrated into the tower. The cable simply needs to be threaded through the parts and pressed into the designated grooves, then the cable is…
Print approx. €0.04–€0.05 excl. taxPreliminary estimate for one variant
I was looking for a charging station that holds both my phone and watch, so I tried and remixed the one from Meningitix. It's a sleek and clean looking one, just like I wanted it to sit on my nightstand. Though it was made for the bigger…
Print approx. €7.91–€9.67 excl. taxPreliminary estimate for one variant
print parts with 3 perimeter, 30%grid & 0,25 layer height or use 3mf what u need (two handles): printed parts: 2xHANDLE (MorL)/4xHANDLE_MOUNT/ 16xSCREW_v2 4x screw M4x12mm or longer 16x screw M3x12 or longer, max: 20mm 4x M4x6mm heat…
Print approx. €6.18–€7.55 excl. taxPreliminary estimate for PETGSource material: PET
Guide A has a hinged (non removable) box section and a fixture for the lid I used a kitchen sponge, cut out a rectangle (28x9x6mm) from it and pierced filament through it. After that guide the filament through the guides opening, place…
Print approx. €0.98–€1.20 excl. taxPreliminary estimate for PETGSource material: PET
This camera mount utilizes the Ring mounting plate to attach any Ring camera. The mount is secured to the enclosure with just one screw, providing flexibility for various positions within the enclosure. In the showcased setup, the chosen…
Print approx. €2.23–€2.72 excl. taxPreliminary estimate for PETGSource material: PET
First of all, I am proud to say that this one was a successful print on the first try. Secondly, I'm not too worried about print speed anymore. I am concerned more about where I utilize my 3d printer and its material. I've always had a…
Print approx. €12.92–€15.79 excl. taxPreliminary estimate for one variant
Custom Baseplate for the xTool F1 laser to center an original 20w EU-Apple charging plug.
Print approx. €2.81–€3.43 excl. taxPreliminary estimate for one variant
Prints inverted with 144 bridges that grow as it goes up. You may want to dial back speed at higher tiers. Very rigid.
Print approx. €3.26–€3.99 excl. taxPreliminary estimate for one variant
An AvE style warning sign with attitude for the petrol engine enthusiast add blinkenlight and chooch to where it's needed Size The model measures approx. 45mm x 45mm x 0.65mm Manual Multicolour This print uses manual multicolour with four…
Print approx. €0.21–€0.26 excl. taxPreliminary estimate for one variant
For Pixel, stand, charging dock. Simple stand without support structure, little material consumption.
Print approx. €0.87–€1.07 excl. taxPreliminary estimate for one variant
Remix of Bukinara's lid so that it can support the “Original Prusa Enclosure Mesh Side Boxes for MK4” model. Included is two variants: 1.) Notched version, no hardware needed, simple print 2.) Handle Version, requires handle (bundled…
Print approx. €1.37–€1.67 excl. taxPreliminary estimate for one variant
it is an easy printable rocet engyne modell it can be instald to a rocket body or can be plased anywhere. it is also contains g code modell to
Print approx. €2.90–€3.55 excl. taxPreliminary estimate for one variant
This is a chess set, as similar to a regular one that I could make. It has engraved letters, indicating the intial of the piece; useful for beginners who may not be able to tell apart pieces when first starting. The king and queen can…
Print approx. €6.39–€7.81 excl. taxPreliminary estimate for one variant
This is a rock solid mount for any camera equipment that uses a standard ¼"-20 screw. The mount is modeled after the spool holder that comes with the Prusa Original Enclosure. It screws perfectly into any of the enclosure's corner…
Print approx. €1.34–€1.64 excl. taxPreliminary estimate for PETGSource material: PET
Similar to a T-track tray , but with different holes for the accessories I use with the Shaper workstation: 19 mm Wrench 4mm Allen Wrench Vacuum Hose clips Router bits Suction brush Although the tray can stand by itself, it can be secured…
Print approx. €5.51–€6.73 excl. taxPreliminary estimate for PETGSource material: PET
Here i made a over engineered Spool holder for 1 KG spools. I made mine from a steelplate 50mm*125mm*5mm and two 20mm square tubes with a length of 100mm and welded on the steelplate. Give it a nice black coating. With the steelplate and…
Print approx. €0.52–€0.63 excl. taxPreliminary estimate for one variant
This print is based loosely on argoroots' toolbox (although argoroots only shared STL files rather than the more easily editable STEP files, so I started from scratch). The major differences are: Hooks on the side for hanging long tools…
Print approx. €9.33–€11.40 excl. taxPreliminary estimate for PETGSource material: PET
The provided stencil is designed for the FedEx Padded Pak, but don't hesitate to personalise it and mark your spots according to your preferences. Suggested print settings: Layer height 0.2mm. Infill 15%. No supports are needed. If you…
Print approx. €0.06–€0.07 excl. taxPreliminary estimate for one variant
I modified the object after printing to fit a distanced rasPi because I bought the version whit all pin
Print approx. €1.36–€1.66 excl. taxPreliminary estimate for PETGSource material: PET
This is a model of a fringing reef intended for educational purposes. Print with supports.
Print approx. €4.93–€6.03 excl. taxPreliminary estimate for one variant
This tool allows you to scratch yourself or have a little massage. (But honestly - it's just much easier to ask somebody else to scratch you or massage you.) Print settings: No supports (but you have to put it on the right face) Models…
Print approx. €0.26–€0.31 excl. taxPreliminary estimate for one variant
Initially designed clip for managing strings of the Outshock reflex ball trainer. The elastic strings easily get entangled, length adjustment and switching between the 2 sizes of balls is not that easy. Great improvement with this simple…
Print approx. €0.85–€1.04 excl. taxPreliminary estimate for one variant
Alternative handle for Plugin Festivals (Maentum) IceCube fridge. Recessed grip, sufficient to lift the box, narrow enough (15mm) to fit my setup (Eurobox camping storage). 2 versions - with and without cutout for velcro strips (10 x 2 mm…
Print approx. €1.34–€1.64 excl. taxPreliminary estimate for PETGSource material: PET
I added the sppol later so it's actually in a separate file.
Print approx. €0.59–€0.72 excl. taxPreliminary estimate for one variant
This is a case v1.0 for the Synaptics Coralboard SL. All the vents are provided in the base and the lid to access the Pin headers. Natural cooling considered and so, no fan mount planned.
Print approx. €2.78–€3.39 excl. taxPreliminary estimate for one variant
3D model of the Raptor Vacuum Engine from Starship designed for 3D printing. Model can be assembled with standard super glue. Default Dimensions (L x W x H): - 1:16 scale: 5.5 x 5.5 x 11 in (140 x 140 x 280 mm) Check out my other rocket…
Print approx. €4.14–€5.06 excl. taxPreliminary estimate for one variant
A Christmas Update | V4 is Here! 🎄 12/09/2024 This update marks the final version of my iPhone Standby Dock Remix, and I couldn’t be prouder to share it with you all. Creating this has been a monumental task—I went through and completely…
The best Xbox controller stand is minimal and nearly invisible — keeping the focus on your controller, not the stand (🇦🇷 Designed in Argentina by @impuestito_org ) – THIS IS THE ORIGINAL DESIGN ✅ Minimal design. No supports needed. Weighs…
All variant have holes for magnets 1,5x⌀10mm or you can use 2.0x⌀10mm, except for the 3x⌀6mm model. Update 12-09-2025 - Added internal model !! Prototype !! Magnetic version to be used inside, if you want to use the internal spool holder…
This miniature jet engine easily attaches to your car's AC vent. As it spins, it releases the fragrance of the elements you place inside its inner container. Update 11-May-24: Version V2 Added Important: Using a heat-resistant material is…
Think I'm Awesome? ~ https://buymeacoffee.com/triplegworkshop I chose to go with organic supports
This engine block model serves as a stylish keychain. 3D printed with attention to detail, it's perfect for car enthusiasts who want to add a technical touch to their keyring. A great accessory that's easy to print If you have an idea for…
It can hold heavy backpacks and, for no additional cost, lightweight backpacks too. Perfect for students who have bags full of heavy books. For best results, print in PETG with 15% infill. No supports needed. 9/9/26 Update V2.1 has been…
Needed some push-rivets after losing some reassembling an Original Enclosure - sharing here in case you need some also. Simple functional push-rivets used in securing thin panels for the CORE One, the Original Enclosure and I assume,…
This project is a fully functional V8 engine model designed for 3D printing. It features: Moving crankshaft, pistons, timing chain, and two valves per cylinder, standard firing order: 1-8-4-3-6-5-7-2, Fully printable timing chain, Can be…
Wall Hanging Cat Decoration
Maj 30/06/24 : https://www.printables.com/model/927111-anti-pluie-piege-anti-frelon addition test piece anti rain hat suspension Part to test because no more printer working at the moment... fixing with petg wire as attachement Thanks in…
Get the other engines here ! Get the screwdriver here ! Build Video/Instruction Print the weights at a higher infill percentage to actually give them weight (I used 70-80% infill on the weights). This entire print is around 180g of…
Update 16/3/2025: Each model is now labeled with its size! Insulation Cutting Tool – Perfect for Plumbing Projects This versatile insulation cutting tool is available in 11 sizes, ideal for different plumbing needs. The sizes range from…
Rather than setting layer temperatures manually for a temp tower, just include one line of G-custom code in PrusaSlicer's “before layer change G-code" section to do it automatically. You can use the attached .3mf file as a starting point…
Clip de fermeture pour vos emballages. - Glissez le simplement pour le mettre. - Pressez la queue du chat pour aider à ouverture, ou tirez dessus. Petit chat mignon qui aidera à égayer vos placards. Si vous appréciez ce modèle, vous…
Activate firmware retraction in your slicer. Activate firmware retraction in klipper by adding this to you printer.cfg : [firmware_retraction] retract_length: 0.8 retract_speed: 60 unretract_extra_length: 0 unretract_speed: 60 Slice the…
Since I could not find the ideal temp tower that meets my expectations, I designed my own. Features: - Uses little material because it is not too big - Different overhangs, 45° and a curved one - A thin wall at the overhang to test the…
Reinventing the wheel, yet again. The whole thing is 3 mm deep (z) and each strut is 1 mm wide and 0.8mm deep (so about four passes). The smaller one goes from 5mm to 50mm in 5mm interval; the bigger one goes to 75mm. Having trouble with…
![[ REMIX ] Original Prusa Enclosure toolholder (LED stripe compatible, mirrored)](https://media.printables.com/media/prints/554974/images/4457989_f96586f8-1391-49f7-b657-7d8caab999ca/img_2848.jpg)
