857 models
Here's my attempt at the MG6 Magnum Pistol from Halo. Just use the exploded image for assembly, you may need to sand the connection points so they fit. Here's the assembly and painting instructions…
Hey Timothy, Hows this for a weapon, Sorry a bit rushed, so let me know how you get on. Will post the badge next, Cheers Jace PS I read somewhere the gun was about th30cms long so do check the sizing suits your needs ; )
The mouse needed a name, so it is now called the Lil Magnum! Because it is small! Be sure to check out the tips on successfully printing a good, light Li'l Magnum ! NOTE: I don't have an R1 to test. The R1 has the same screw pattern and…
When a rotating cylinder (or sphere, for that matter) meets a transverse airflow, lift is generated by what is known as the Magnus effect. This is the same phenomenon that causes ping pong balls, tennis balls and soccer balls to curve in…
In this video we are going to breathe some fire into "Project Dragon Rising" - The Creality Ender 7 printer that I have been modifying. The Bondtech LGX lite extruder combined with Slice Engineering's Mosquito Magnum hot end should bring…
.357 Magnum, also known as .357 Smith & Wesson Magnum or .357 S&W Magnum, is a centerfire handgun cartridge designed in the United States of America by Elmer Keith, Phillip Sharpe, Douglas Wesson, and Smith & Wesson in 1934. Print this…
UPDATES : 29/09/2024 : Vial file “big_num_vial.uf2” added. ____________________________________________________________________ Context: BigNum is part of a series of projects I've recently started, all focused on custom mechanical…
Just simple adapters for M nuts. HF Print Settings Printer Brand: Anycubic Printer: All-metal Mega Rafts: Doesn't Matter Supports: No Resolution: 0,15 Infill: 100 Filament: PolyMaker PETG Category: Parts
Couldn't find a good model of this staff online for 3d printing so I made one myself. all pieces can be printed without without supports. There's is a hole in the bottom of the staff made for a rechargeable li-ion battery as well as as…
Korth magnum sport 357 full scale model
I made this a few years ago .. not even sure if it'll work Let me know of any problems Category: 3D Printing
halo gun by https://www.thingiverse.com/thing:5494304
The .357 Smith & Wesson Magnum, .357 S&W Magnum, .357 Magnum, or 9×33mmR (as it is known in the unofficial metric designation), is a smokeless powder cartridge with a 0.357 in (9.07 mm) bullet diameter. It was created by Elmer Keith,…
The mouse needed a name, so it is now called the Lil Magnum! Because it is small! Be sure to check out the tips on successfully printing a good, light Li'l Magnum ! This is obviously inspired by Optimum Tech's Zeromouse and Zeromouse…
This revolver cylinder pen holder is ready to hold all your precision writing instruments and keep them on target for all your paper slaying needs. The standard model has 13mm holes for your normal pens and pencils. To get the model to…
M6G Halo Magnum nerf pistol. Not for kids, this thing hits hard. Can run up to 6 bearing BCAR ensures accuracy. 13 round magazine. Hardware kits for this model can be found here:…
Holds 18 rounds of .357 or .38, lid closes with a satisfying click. Compact, remix of 7cm slide box.
Non-magnetic headphone hanger for the secretlab magnus gaming desk.
Includes a longer x-carriage to allow the inductive sensor to drop down lower, as well as an extended fan shroud / mount. Based on the original Voron mounts for Mosquito. Recommendation: Cover the fan shroud and sensor in reflective…
⚙ RECOMMENDED 3D PRINT SETTINGS Material: PLA or PLA+ recommended Layer Height: 0.16 mm for finer detail; 0.20 mm for faster prints Infill: 10–15% recommended for most models Wall Loops: 2–3 Supports: Enable where necessary based on model…
FDM -> It is recommended to use a layer height below 0.15 for printing. It is recommended to use LCD or SLA for printing to obtain higher precision. "A series of high-precision bullet models." In order to meet the needs of military…
This is a the same robot from the US comic series “Magnus Robot Fighter” but in a different pose than the one I published a few days ago … this one also appears in the 2010 published US comic book series. Since this model has not been…
Very basic M6 wingnut. Threads are modelled, but recommend using a m6 tap to further refine them.
M5 Flügelmutter für Gardena 300 Spindelmäher. Nach dem Druck eine M5 Mutter mit Hilfe eines Lötkolben erhitzen und einsetzen. Category: Household
The .338 Lapua Magnum (8.6×70 mm or 8.58×70 mm) is a rimless, bottlenecked, centerfire rifle cartridge. It was developed during the 1980s as a high-powered, long-range cartridge for military snipers. It was used in the War in Afghanistan…
Hey here is a 28mm gnome wizard, his name is Magnus Trouttickler. He is best printed in resin, a supported version is provided but only his beard needs supporting and he has also been printed on an FDM printer! If you're interested in…
Wing, winged, thumb or butterfly nut knob to perfectly adjust the parameters and tighten the tolerances down :) V1: Modified original prusa knob (MK3S) 15.07.2022: Added V2 - redesigned clamping geometry for various potentiometer heights.…
This is obviously inspired by Optimum Tech's Zeromouse and Zeromouse Blade, but using FDM and a more affordable donor mouse. The thumb and finger rests are in a reasonable spot for me, and the buttons are lined up well. The shell requires…
They work fine if you recut the threads with a tap drill. Otherwise upscale the X- and Y- dimensions in your slicer, 105% - 110% should be a good starting point. Made with blender, only actually tested M3..M6 (Seriously, who the hell uses…
A friend approached me a while back with a problem. He's a professional photographer and often uses several remote flashes to light different parts of an architectural scene. The Yongnuo and Speedlite flashes he uses each come with a foot…
This is ..38 Special and .357 Magnum stacking loading block. Category: Tool Holders & Boxes
First of all, this is a remix and all credits go to Wolfchild who created https://www.thingiverse.com/thing:378926 which is on its turn based on http://eigenbaukombinat.de/invasion-der-loetfanten/ I liked the straightforward design, but…
This is a scare and dimensionally correct print of a 300 winchester mag cartridge. Category: 3D Printing
A simple water dripper for a stackable sphagnum moss pole. Sits in the inner diameter of the stacking part of the pole. Uses a series of small funnels to slowly feed water onto the top of the moss, which IDEALLY should allow the water to…
Reloading tray for .357 Magnum and .38 Special. Fits also for smaller caliber.
This video is a complete walkthrough for the Bondtech DDX extruder upgrade for your Creality 3D printer. I am also installing a Slice Engineering Mosquito Magnum hot end with 50W heater cartridge and 300 degree thermistor. This…
Works with PLA or ABS. Use supports at your own discretion. I printed several of these with no supports whatsoever. Redesigned using metric measurements as most 3d print software is metric. Category: 3D Printing
I made this remix because the original did not have enough room for the larger heat sink of the magnum+, and cable management was almost impossible. I made the heat sink fit and created extra room for cables. I made a block to be able to…
Stun darts for the Cold Steel 0.625 cal Tim Wells Signature Series Stock Master blowgun. If you print them in TPU with 100% infill, they're basically indestructible and almost as powerful as solid plastic darts. Both will easily go…
Wingnuts for M3 and M4 screws. The M3 Wingnut is just scaled down to 79% from the M4 Wingnut. Nice easy print. Print with the flat face on the print bed. Tap in the appropriate nut. PTEG probably best - PLA might crack when you tap the…
Works with PLA or ABS. Use supports at your own discretion. I printed several of these with no supports whatsoever. Redesigned using metric measurements as most 3d print software is metric. Category: 3D Printing
My nephew wanted a staff for Halloween, saw this design and loved it. I wanted to make it a little more sturdy so took out middle section of staff and replaced with PVC. Also took off the bottom light crystal and opted for a less…
Bobble the head of your favorite City Commander! Get the spring and base of your choice from the original bobblehead print by 3DPrinty, or use my 3MF or provided gcode. This model includes a remix, with permission, of the head from the…
300 Winchester Magnum stacking loading block. This is a work in progress, so check for updates before printing. Category: Tool Holders & Boxes
A set of various hooks for pegboards with 10 mm square holes spaced by 38mm, branded as Magnusson, Wolfcraft and other. As usual with my models, I made them editable by a spreadsheet in FreeCAD = you don't need paid software to edit them…
About QIDI X-Max X-Plus I-Mate (S) Wingnut Extender is an extender for the wingnuts that secure the bed leveling screws on the QIDI X-Plus and X-Max. I found the wingnuts to be annoyingly small so you don't get any force to unlock it and…
Flügelmutter M6 Post-Printing M6 Mutter erhitzen und einsetzen Heat and insert M6 nut Category: Hobby
A set of magnetically mountable light shapers for Yongnuo YN685 flashes, consisting of a gel holder and a honeycomb/grid that reduces the light output angle to roughly 40°. The magnets used are widely-available 8x3mm neodymium ones (dia x…
.44 Magnum stacking loading block. This is a work in progress, so check for updates before printing. Category: Tool Holders & Boxes
I wanted my DeSteiner Revolver II to be more realistic. But I got that idea after I had already printed it, and I didn't want to use more filament than necessary. So I modified it after printing (hence the lack of files for the other…
⚙ RECOMMENDED 3D PRINT SETTINGS Material: PLA or PLA+ recommended Layer Height: 0.16 mm for finer detail; 0.20 mm for faster prints Infill: 10–15% recommended for most models Wall Loops: 2–3 Supports: Enable where necessary based on model…
My Toyota Avensis battery compartment cover has a badly made plastic wingnut which I think is designed to be shoved on in the factory for sheer speed, and then unscrewed to remove. The only contact between the nut and the threaded shaft…
I didn't like the gray cable ports that I got with my Ikea desk so designed these replacements. The main reason I wanted something different was the color but my design has a couple advantages over the original Ikea part. They are easier…
I made this as a coin or medallion prop for a DnD campaign. Printed it in PLA Oh My Gold filament using a 0.25 mm nozzle and 0.1 mm layer height, but 0.4 nozzle should work fine too. I added the coin version and the gyro version aswell.…
.357 Magnum stacking loading block. This is a work in progress, so check for updates before printing. Category: Tool Holders & Boxes
This is obviously inspired by Optimum Tech's Zeromouse and Zeromouse Blade, but using FDM and a more affordable donor mouse. The thumb and finger rests are in a reasonable spot for me, and the buttons are lined up well. The shell requires…
This is an improved fan duct with shroud for the Modix Big 60 (& 120) printer, with the Hart Smart Products "Premium Printhead", which consists of a Bondtech BMG-M extruder and Slice Engineering Mosquito Magnum+ hotend. Exceptional…
Replica of .44 Magnum bullet in 3:1 scale. I made it as box with srew top. I printed it from silk PLA with 0,12 layer In raw files u can find original dimension of bullet.
The Shattered Glass Ultra Magnus figure includes parts from the Legacy G2 Laser Optimus Prime, including a red Matrix. However, there isn't a good place to store that piece in robot or vehicle mode. This adapter piece allows the Matrix to…
A headphone holder designed to fit in the frame of a Secretlab Magnus Pro desk with USB for easy charging of headphones. The holder just slides in the end of the frame with a slight press fit replacing the original end cap. The design has…
In this video we will be upgrading the Creality Ender 3 MAX to make more efficient use of its large build volume. You can easily cut print times in half and this is a massive time saver when making use of the larger build volume. To do…
An upgrade hotbed thumbwheel. There's a very tight clearance at the back of the Anet A8. Used these spring bushings: https://www.thingiverse.com/thing:2146448 Print instructions Category: 3D Printer Parts
Ladebrett zu Wiederladen 9mm und .357 Magnum für 100 Hülsen
.338 Lapua Magnum stacking loading block. This is a work in progress, so check for updates before printing. Category: Tool Holders & Boxes
Tool for tightening plastic toilet seat wing nuts deep socket for long seat bolts long (150mm) and short (75mm) versions Add “Fuzzy Skin” modifier for extra grip! (shown in picture)
I needed a dozen or so of these, and there was no reason to purchase the metal ones from Secret Lab when I could knock together a quick model print and attach magnets. I printed these on my X1C using some generic PLA to test, and will…
SAY NO TO BORING LUG NUT COVERS!!!! I’ve wanted to do this for a while, so here it finally is ;) My very own Semi Truck or any class A vehicle lug nut cover xDDD This is V10. THIS HAS BEEN TESTED AND WORKS It was designed to be printed…
Simple print for sports shooters and hunters.
The Halo series, developed by Bungie, holds a special place in my heart. Halo was one of the first games I got on console when I was younger, and I’d followed the series and many of the books for far longer than I’d stuck with most…
VW lugnut cover, round one is for antitheft lugnut
This is a scare and dimensionally correct print of a 338 Lapua Magnum cartridge. Category: 3D Printing
This mod converts your Nerf Mega Bigshock into a 4 short-dart capacity Halo Magnum pistol that you load from the rear. There is some shellcutting required but keep the original screws as you can use them to screw the two halfes together.…
Reloading tray for .357 Magnum ammunition created for my friend who's reloading ammunition a lot. He asked me to create this one based on his requirements - with precise holed tolerances and height of every step just enough. This is the…
Ender-7 Mosquito Magnum/LGX Lite Hotend Adapter Finally decided to upgrade my ender-7 stock hotend, the best flow rate i was getting before the flow started degrading was about 14mm^3/s (0.4 nozzle), so the best benchy time i had was just…
High Standard Derringer DM 101 Magnum
I made this thing to replace the worn out velcro strap that came with my Stihl Magnum blower. I designed it for nylon; YMMV with other materials. It secures to the nozzle with a small ziptie, and hooks to the top corner of the blower (as…
7mm Remington Magnum stacking loading block. This is a work in progress, so check for updates before printing. Revision History: 05/12/2023 - Text vertical adjusted. Category: Tool Holders & Boxes
My wife has an Anker PowerWave 7.5 Wireless Car Charger . It has a ball-and-socket swivel joint with a wingnut to tighten it. The original wingnut split, rendering the phone mount useless. Rather than buy a new wireless charger / phone…
Slip on barrel accessory for the Nerf DoubleStrike, minor shell cutting required (Cut the front sight post and corresponding bottom barrel post flush to the ridge). Features a single length of nerf tac-rail on the top Length approx ~150mm…
This is a headphone holder designed for use with the SecretLab Magnus Pro sit/stand desk. The under desk post cover is removed and the holder slides into the “U” channel underneath. I personally use it on the up/down control side.
"The most powerful handgun in the world!" —Inspector Harry Callahan (1971) It is based on a custom Smith & Wesson Model 29 but as its development progressed it became more of its own thing, a Wiimote Edition, I guess. I forgot to add that…
Ender-7 Hotend v2 Mosquito Magnum/Lgx Lite Extruder This version has a more modular design with the mounts for the fans and the adxl345 separated so the can be customized. It also enables better visibility of the hotend nozzle included…
A positive battery terminal cover for a Dodge Magnum. They no longer make the part. Supports are needed. A small piece of 1.75mm filament is used as the hinge pin. Printed at .2mm Infill was 20% Was printed in PLA and has held up just…
The design is resized to fit perfect M5 nut as shown on photos. Design is a remix from https://www.thingiverse.com/thing:4809805 done by https://www.thingiverse.com/Standart - original all credits to him :-) Print Settings Printer Brand:…
I got a request for a .300 Norma Magnum ammo 10pcs case. The spacing is 10pcs/14,9x91,5mm. The shell was so close to the .338 i made before so i used that as template and just made the bullet 1,5mm longer. I wanted to use the latches i…
Secret Labs offer a magnetic headphone hook for their desks, and its fairly cheap! However I didnt want to wait for the postage, and so I made my own. I started off with a headphone holder for the bose QC35s, and modified it to take some…
Soft jaws to fit the 125mm Magnussen vice. Magnets are to be be fitted in the back to hold the jaws in place. F3D file attached if you need to adjust this design to your own vice. I have a horizontal groove through the whole softjaws to…
This is a remix with more space for the new wingnuts of the Anet A8 Model 2018, also I reduced the size of the inner wheel because it collided with my frame. Don't forget the support because I added a little extrusion to distance the…
This is Spiral Vase Mode .38 Special and .357 Magnum stacking loading block. Print Settings Rafts: Doesn't Matter Supports: No Resolution: .2 Infill: none Notes: Print in Spiral Vase Mode with double your regular Perimeter Extrusion Width…
Inspired by the classic manga knights of zodiac
Sci Fi Movies - The Black Hole - U.S.S. Cygnus - 1979 3D printable model.
I made this 3/8" wing nut about 5 years ago using a model on Thingiverse . The original model includes Fusion 360 design code to allow you to create any size wingnut. I've waited for the designer to import it here, but that hasn't…
This is a the same robot from the US comic series “Magnus Robot Fighter” but in a different pose than the one I published a few days ago … this one also appears in the 2010 published US comic book series. Since this model has not been…
I needed a fan duct that would work with the Mosquito Magnum+ hot end. I remixed this from the Eva Volcano triple duct. After a few tries, I realized it was just too fragile for me (I'm a bit clumsy) and so I added a few crossbars to…
I designed this after upgrading to the Bondtech LGX Lite Arrow on the CR-10 Smart, with a Mosquito Magnum hot end. There were quite a few designs out there already for mounting a 40mm fan over the Slice Engineering 25mm fan that's…
Tahač Renault Magnum 1:53 Pro tisk je důležité dbát na přesnost (užší tryska) a nastavení tiskárny (pro detaily je dobré zvýšit intenzitu chlazení a snížit rychlost tisku aby se detaily neslily) Po výtisku odstraňte podpory (je lepší…
