Counting matching models…
This Hacksaw Blade Handle is one of several versions of my popular Hacksaw Blade Handle. It securely holds a standard 10" hacksaw blade and transforms it into a compact, durable cutting tool ! It provides a rigid and ergonomic extension…
Backstory My makerspace tends to be the warmest room in the house. In the winter, I can just open my window and let in some cold air. In the summer, I have the choice of being uncomfortable in my too-warm makerspace, or being…
This is a bottom enclosure for StageHacks FADER_8 MIDI/OSC Controller : https://www.stagehacks.com/store/p/fader8 I was a bit worried by the "all open" design and wanted something more protective for the components. To install it, you…
This Hacksaw Handle (no inserts) is one of several versions of my popular Hacksaw Blade Handle. This version doesn't require heat-set brass inserts or a soldering iron to install them. Instead, the female threads are printed in the handle…
This Hacksaw Handle With Guard (no inserts) is one of several versions of my popular Hacksaw Blade Handle. This version features a slip-guard band and finger grip bumps , and it doesn't require heat-set brass inserts or a soldering iron…
This handle features an ergonomic shape with finger grooves and a curved profile, providing a comfortable and secure grip during use. The blade is fixed using a snap-fit locking mechanism, allowing quick installation without additional…
This Hacksaw Handle With Guard is one of several versions of my popular Hacksaw Blade Handle. This version features a slip-guard band and finger grip bumps , and it uses heat-set brass inserts to provide you with a tool that should last…
Made a guide to get straight cuts when using a hacksaw. Added different version and one that sits better in the vice Gap for hacksaw is 1mm
Saw Stop Hacks @ MKE Gadgets #166 If you are like me, when you place a dado blade set. In your Sawstop the over the blade dust collection hood has to be removed. One of my hack is a 3d printed plug for the hose that is left dangling…
The mini hacksaw blades are just the right length and stiffness for pumpkin carving! Steps: Slide the bottom pin of the blade into the bottom horizontal slot of the printed handle Use filament scraps to secure the blade at top and bottom…
A handle for holding shortened hacksaw blades for use in confined areas. Drawn specifically to cut the hole required to change the heater flap on a Peugeot 407. The basic dimensions of the handle are similar to the generic cheap…
-PETG -No border -No support Print two model. 4 x M6 20mm 4 x wing nuts M6 After print : you need to lightly file the holes to easily fit the nuts
This is a Gridfinity bin designed to hold your Hacksmith Mini Saber Designed in tinkercad No Supports needed 2 walls 3 top/bottom 10% infill
You will need a snap to push this into. Also add supports please.
I ordered an original “Hacksmith bottle opener” but i couldn't wait for it to arrive so i printed one but just for design reasons it doesn't work here you can buy the real one: https://hacksmith.store/collections/essentials/…
This Hacksaw Blade Handle is one of several versions of my popular Hacksaw Blade Handle. It securely holds a standard 10" hacksaw blade and transforms it into a compact, durable cutting tool ! It provides a rigid and ergonomic extension…
Check the model here: https://a360.co/3GXgjM9 BOM: 3 x M4 x 10 mm 3 x Hex nut M4
Replacement for broken Gearwheel for Kläger hacksaw printed in PCCF
THERE IS A PDF GUIDE YOU CAN DOWNLOAD Slicer for fusion is a super useful tool that I've used a lot, it can be used to generate very complex models with a very simple ui, I thought I would share this laser cutting hack as it is a game…
A hacksaw frame that takes 6-inch "junior" hacksaw blades. Unlike full size 12-inch blades which have a hole at each end, the junior blades have a small pin at each end. In this design two M3 x 8mm socket head screws guide the blade and…
Backstory My makerspace tends to be the warmest room in the house. In the winter, I can just open my window and let in some cold air. In the summer, I have the choice of being uncomfortable in my too-warm makerspace, or being…
This is a compact 3D-printed wall mount designed to hold a standard metal hacksaw and spare saw blades together in one clean, accessible location. 🔧 Features : Two M4 wall mounting screws securely attach the holder to any vertical…
Easy to use mini hacksaw, No screws needed only a gentle push
This is a cover for StageHacks FADER_8 MIDI/OSC Controller : https://www.stagehacks.com/store/p/fader8 It just clips on top of the controller to protect the faders during transport... The typeface used for the writing is OpenSans-Bold,…
This is a bottom enclosure for StageHacks FADER_8 MIDI/OSC Controller : https://www.stagehacks.com/store/p/fader8 I was a bit worried by the "all open" design and wanted something more protective for the components. To install it, you…
Schubladenbox mit 2 Unterteilungen für kleine Handsägeblätter. …………………………… Drawer box with 2 compartments for small hand saw blades.
I just wanted to clean up my drawer. Organize your hacksaw blades (open holder on left, to allow this to print under 250mm), 9-inch and 6-inch sawzall blades (4 slots), and 14 slots for JigSaw blades. All are 10mm wide. The tall ones are…
Just a simple model to hold a the Gen 1 Mini-Saber from Hacksmith Industries upright. Holds it surprisingly stable and secure. I made the bottom of it 100% infill using a shape modifier in PrusaSlicer to try and make it a bit more bottom…
This is a hacksaw handle that accepts a standard 12mm / 1/2 inch wide metal hacksaw blade. It's very useful to get into small spaces and for flush cutoffs. Last but not least it allows to recycle broken or partially worn blades. Mount the…
This Hacksaw Handle (no inserts) is one of several versions of my popular Hacksaw Blade Handle. This version doesn't require heat-set brass inserts or a soldering iron to install them. Instead, the female threads are printed in the handle…
Features Ergonomic handle 2mm preload to keep the blade under tension stiff connection to allow for precise use Tested BOM 300mm hacksaw blade 2x D4-M3-L12mm Binding screws Print settings Insert solid layers: 33,34,35,42,43,44 0.2mm layer…
This Hacksaw Handle With Guard (no inserts) is one of several versions of my popular Hacksaw Blade Handle. This version features a slip-guard band and finger grip bumps , and it doesn't require heat-set brass inserts or a soldering iron…
The original design has a very nice feel in the hand, but I didn't understand the final assembly. This remix has 2 threaded holes for 2 M3x8 screws. One fits through the blade to ensure no slipping.
I designed this because i have a few blades but no fitting saw for them. Works not as nice as a metal one, but its still working very well. Designed to use 25mm blades with 300mm hole spacing (1-2mm thickness). Others might also work but…
I have the Hacksmith Mini-Saber Gen2 but i also had one of those cheep tool walls you can get from Amazon so modified the holder to fit it.
I made this blade protector for my Stanley Junior Hacksaw because I kept carrying it to university and it was always awkward to store safely in a bag or toolbox. I was constantly improvising temporary covers for the blade, so I decided to…
A small box to store hacksaw blades on the HSW system Thanks to RostaP for the Honeycomb storage wall I used PLA, most other materials should work OK. It needs 30 grams of filament, and takes about one and a half hours on a BBL A1.…
This handle features an ergonomic shape with finger grooves and a curved profile, providing a comfortable and secure grip during use. The blade is fixed using a snap-fit locking mechanism, allowing quick installation without additional…
Parts include pieces for a finger, motor bracket and pulleys for the motor.
This Hacksaw Handle With Guard is one of several versions of my popular Hacksaw Blade Handle. This version features a slip-guard band and finger grip bumps , and it uses heat-set brass inserts to provide you with a tool that should last…
The original model was reduced to half size in x and y, and then the ends extended to the maximum length printable on a Prusa Mini. The saw slots are suitable for a junior hacksaw or other fine kerf saw. The box may be bolted down to a…
I have a desk with Ikea's ALEX Drawer Unit underneath and a short BILLY Bookcase stacked on top. So many small items have been pushed onto the shelves, I decided I needed some extra drawers. This template was aimed at allowing drawer…
this is a really simple hacksaw mechanism designed in SolidWorks for a first-year machinery students project. I used a servo motor with a controller, it's a 360-degree rotating servo the SolidWorks files are also uploaded so you can go…
Tape cutting sleeve for 50mm (2") wide tape rolls. Read reviews of PLA only versions that didn't do a good job a cutting the tape, so designed one with a serrated blade. Material : PLA Layer height : 0.20mm Supports : No * *Printed mine…
Garage Set 8 : Handle for hacksaw blade Update : U1 : Screw with little head U2 : Nex Gcode and print successfully Please vote for me !!! Dje See also in pratical contest: Bathroom Set :…
I desgined this mount for my hacksaw and spare blades. It needs two srews to mount it at the wall. (max diameter 4.5mm9 For the spare blades you need one M4x20 screw and M4 nut.
Hacksaw Katana Handle for conventional hacksaw blade. A hacksaw cannot cut more than the width of the frame, but with a side handle, it can cut as long as a saw. The hacksaw blade will break if pushed too hard, but if used with care, it…
A saw blade holder for most common hacksaws. The lids clip on and will stay on even if you turn the holder upside down and shake hard. Your saws won't fall out even if you toss your toolbox around. Chamfers make inserting and removing the…
This saw handle is compatible with standard hacksaw blades that can be secured with an M4 nut. near the top of the grip. The saw is super comfy to use and surprisingly useful in many situations where the top bar of the normal hacksaw gets…
Da die Hackscheiben für die Zauberette immer in der Küchenschublade unauffindbar waren, habe ich einen Halter konstruiert, wo diese reinpassen :-)
this is a hacksmith keychain logo fits nicely on a bag please like and add a make infil 25% resolution .2 no supports
Plastic sawguides are great… except that often they're softer than the materials being sawn. Now make square cuts with confidence : this tool is reinforced with hard steel dowels *. Interchangeable jaws accept different material shapes.…
i forget the size of bolt i use but its long m6 insert the m6 bolt in the handle have to press fit it and on the knob press fit the m6 nut drill holes on your hacksaw as per your comfortable position and use as per your hand type left our…
This is a holder to hold the Hacksmith Mini Saber. https://hacksmith.store/en-au/products/hacksmith-mini-saber I just use a bit of double sided tape to stick it to the wall so i can hang it up. Category: 3D Printing
This is a 1x5x7 gridfinity bin to store the Hacksmith Mini-Saber . This is designed to store it with the switch face down without being touched to make it impossible to accidentally trigger. I recommend using mouse ears to prevent…
[Deutsch - German] Du hast gerade dein neues Hacksmith Mini-Saber Gen. 2 erhalten und möchtest es nun ansprechend an deiner Lochwand präsentieren? Dann ist dieser Print die Lösung. Die Halterung nimmt das Hacksmith Mini-Saber Gen. 2 auf.…
A holder for your Hacksmith Industries Gen2 Mini Saber to be mounted onto your honey comb storage wall.
I wanted a way to display my mini-saber and the backer coin that came with it, so i made this.
Wall mount for the Hacksmith Mini-Saber Gen 2. Slot on top is for the backer coin to be mounted. mounts to wall with a single screw. I've had best results printing the mount upside-down with no supports with the blue highlighted surface…
Print the two halves of the handle, remove the supports and glue them together. Fastening of the canvas with native screws with nuts (M5x16). Print PETG or ABS or other but the most strong materials/
I designed this because I lost my original one and think every toolbox should have one. This is made in two pieces with interlocking features to ensure both sides line up and the blade can’t ride up through the clamped faces when pressure…
Should be updated to reflect final model, contact me for any questions
Hackspace magazine published a project in issue 48, using a round cheesebox to house a MIDI controller driven by a Pico microcontroller. Although the article mentioned a printable cheesebox, the link to Github included only a box for the…
This is my version of a 3D printed Milwaukee Packout insert that will hold the Milwaukee M12 Hacksaw. I used the Milwaukee Packout Compact Organizer insert designed by @ChadBaker_317227,…
Hacksaw blade handle for 300mm metal saw blades (hacksaw). Print-in-place, efficient and heavy duty. Nothing extra needed. Everyone at my work had a hacksaw blade wrapped in tape in their toolbox. The tape handle was often inconvenient to…
