Counting matching models…
Bau einer sehr einfachen und günstigen Filament Trockenbox für rund 10€. Gebaut aus einer Vorratsbox und ein paar Teilen aus dem 3D-Drucker. how to build a very simple and inexpensive filament dry box for around €10. Built from a storage…
A physical version of the “good fast cheap” Venn diagram This is a redesigned mechanism for K2 Tech Designs' Good Fast Cheap slider. This addition uses a whippletree/rocker bogie mechanism to let you toggle any two switches, but not all…
Basic case for USB-C version of the ESP32 2432S028 2.8" module, also known as Cheap Yellow Display (CYD) / CYD2USB.
I wanted a Drybox that is as affordable as possible without compromising on features! There are already many designs out there that use the well-known cereal box as a basis, but none of them met all my criteria. I wanted to change that.…
This is an enclosure for the Sunton ESP32-2432S028R development board widely available from Ali Express, Banggood, Amazon, etc. The cost on Ali Express is only about $8 USD. The board includes an ESP32 WROOM-32 module and a 320 x 240 2.8"…
This edge banding trimmer is a lifetime tool that works pretty well. The tool make a perfect trim in seconds, is Very stable, especially on starting. You can reverse the blade when dulled. The trimmer allows up to 4mm thick banding. The…
This is a modular system with which many kinematic chains, aka robot arms, can be constructed. The modules can be seen in image 1. The chosen actuators are very cheap servo motors without gearbox, which brings advantages and disadvantages…
Remix of the enclosure designed by @mdkendall for the ESP32 Cheap Yellow Display (ESP32-2432S028R) found on Aliexpress & similar sites. Model adjusted for the USB-C board version, which does have slight variations of the connector…
This is a cheap FPV gimbal for pan/tilt axis. This is designed around common servo, easily found in every online marketplace. The camera used is a old Eachine 1000TVL, but a found the exact same with a different brand. Adaptator for…
This is a simple CYD enclosure designed for remix or for a custom adaptor mount to be bolted to the rear. A series of M4 sized holes are provided in the rear. The rows are spaced 27mm aparts vertically and columns 15mm apart horizontally.…
Summary This is a modular rework / remix of the original case design by ncmreynolds , licensed under the Creative Commons - Attribution - Share Alike license. Full credit to them for the original idea and base structure. What’s New? The…
The most compact tape dispenser yet! Can fit regular Scotch tape 20mm radius 20mm width. No support, no adhesion! Recommended Print Settings: ≤0.6 nozzle ≤0.2 layer height 3 walls 20% grid infill No support No Adhesion
Rugged box for my multimeter I bought for €5. It will probably not be too durable so I wanted a case for it. It fits great without rattling and the probes fit without disconnecting them (I fear the connectors are cheap and would break…
I loved the original design, but I wanted a holder for the little touch pen that came with my USB-C CYD. Here's the result! Requires 2-4 M3x6 screws. Socket-head fit flush, but others will still work. I'll add an adjustable 2020 extrusion…
The CheaPad : the most affordable DIY Klipper Pad ! Let me introduce The CheaPad, an incredibly cost-efficient alternative to all the Klipper pads out there! 🚀 I'm excited to share this minimalist yet highly functional solution for 3D…
I needed a case for the CYD (Cheap Yellow Display) that was thin enough to use 180° USB adapters. The existing cases was too thick so I designed my own one. The case have a cutout for the RGB LED on the backside and “buttons” for the…
Use whatever sheet you like with the BambuLab X1 X1C P1P, be detected as PEI sheet… Made a video about that beginning of 2023, just a few days after I received my X1C: The BambuLab X1C detects the “china” cheap sheet as original PEI sheet…
Better, Faster, Cheaper. Pick any two. Or actually, write whatever words you want on the front. Represented as a physical card that you can toggle the toggles, and one will always be off. If you can, print the “Short Switch” and “Top…
The Polymaker Reusable Master Spool is great, but having the holes modeled into the part means the slicer has to create a lot of perimeters (which makes for slow printing). The slicer is optimized for creating sparse infill patterns that…
Ein Gehäuse für den Marauder auf Basis von einem CYD Display mit externer oder Interner GPS Antenne mehr infos dazu unter meinem Github A housing for the Marauder based on a CYD display with external or internal GPS antenna more info on…
After using a few sub-$100 usb c docks with my MacBook Pro (M1), I could not for the life of me get them to work correctly. I always had to plug / unplug multiple times, etc to get my external monitor to display anything. I don't wanna…
Alternative solution for BMW E46 Double Din AC Relocation Bezel. After a Double Din radio replacement you have to move the AC unit on the lower frame but the unit doesn't fit that well. This is a simple solution that uses your original…
I recently purchased two used Tina 2 3D printers from ebay, and learned their motors protrude bellow the bottoms of them, and the driveshafts grind on the table! I quickly made this 3D model and printed it on my Tina 2 whilst it was…
made these for my Star Trek clock they are intended for these cheap movements or clockworks from e.g. china Print at 0.2 and… Arachne wall generation ON! biggest problem might be the second hand, so I made 3 versions from loose to tight…
Filament dry boxes based on https://www.printables.com/model/634289-filament-dry-box-cheap-and-simple I started building dry boxes using the original parts and saw lots of opportunities for improvement. I re-engineered almost all the…
Having done away with the polished rods and linear bearings to simplify assembly of my previous thing ( https://www.thingiverse.com/thing:5229492 ), I was proud of myself. But, clearly, with all the plastic-on-plastic sliding surfaces in…
Description: These are adapters for Submersible pumps. 2 have odd sizes which fit my cheap Amazon pumps Printables wouldn't allow me to have the “.” in .526 (meaning ½") in the file name. So if your curious what 526 means. thats why. I…
I made slider slots 2mm shorter so it seem to work even better - triggered sliders now does not end in the middle of the slot, but at the left end. Instructions: Download this base Download large and small pivot from Kenneth's model…
Two-part 3D printable enclosure case (base + lid) designed for the ESP32 2.8 inch display module (ESP32E). Features a screen window on the lid, ventilation slots, USB port cutout and screw posts for assembly. Footprint 96.4 × 60.4 mm.…
CYD enclosure/case that can accommodate both USB C connection and Micro USB. Can also use a right-angled USB cable
A compact version of my earlier CYD case available here . This version supports an external antenna. Supports are required for the base only, print both parts flat side down. I also have another version here . The supports can be hard to…
Here's how to build a simple RGB LED cube using cheap 8x8 WS2812 / Neopixel LED panels. The design is a single 3D printable piece, printed four times, that screws to the panels and forms a frame to hold them in place. Parts Needed: 4 x…
I designed this bracket after I dug out my old dual-monitor arm desk clamp for my partner. I had 2 monitors for her but I could only locate one of the mount plates for it. I trawled the internet and even asked Chat GPT to search for me…
When looking for the Cheap Yellow Display online, look for ESP32-2432S028R. It is a 2.8inch display with resistive touch screen that comes with a ESP32 onboard. With the Arduino IDE it is very easy to use it for own applications. There…
After many comments that the words “Better”, “Faster” and “Cheaper” should be modelled rather than written on. I threw this together quickly.
My manual Z-axis ( https://www.thingiverse.com/thing:5145644 ) works quite nicely but is overkill for a light-weight laser module. It can be a pain to assemble if the printed fits are particularly tight and requires polished rod and…
I've made a simple yet functional printer enclosure to protect it from dust, and drafts, and it also helps to stabilize the temperature inside - your big models will warp much less. The “front door” is fixed with clips at the top, and…
A third, and probably final, version of my earlier CYD cases available here and here . This version is the smallest. Supports are required for the base only, print both parts flat side down. Here is a list of the parts I used. These are…
This is a design for a "Stream Cheap", an inexpensive DIY version of the Elgato Stream Deck. Although I made this to take the place of a Stream Deck, it's really a mini macro keyboard that can be used as a hotkey board for any program.…
I REALLY liked a lot of the modular hexagonal drawers that you can find here, but after I printed some of them I learned that they're SO EXPENSIVE to print. I spent 40 bucks in filament just printing the hexes themselves, not even…
This is a minor remix of the Cheap Yellow Display horizontal stand listed on the github page. Instead of needing heat inserts, this instead uses M3*6mm self-tapping screw. The original file doesn't have a lot of meat around one of the…
I printed the original stand, but it was too wobbly and jank, so I remixed it. Parts needed: 2x M4 countersunk screws L=12-20 mm 4x M3 countersunk screws L=8-12 mm 2x M3 button/socket head screws L=12-20 mm 2x M3 countersunk screws…
Edit: I now have two alternative CYD cases here and here . I tried several different cases for my CYD devices (USB C versions) but I could not find one I liked. Either they were a poor fit, had too many holes, were too flimsy, or did not…
If you have a service shop, you need this sign: We Offer 3 Kinds of Service GOOD CHEAP FAST You Can Pick Two Good & Cheap - Won't Be Fast Fast & Good - Won't Be Cheap Cheap & Fast - Won't Be Good Assuming a 0.2mm layer height, color color…
Background I was using an inductive sensor as my main Z_min sensor. I was unable to use it as bed leveling sensor because I was using a very thin and soft steel plate under the glass. This lead to several issues: the glass itself is not…
Snap-together version of https://www.thingiverse.com/thing:5233648 . Slight internal structural differences to accommodate other mounting options but otherwise much the same. Fits directly on Fokoos and Eleksmaker A3 laser machines.…
A sequential adapter to turn the inexpensive USB shifter (can be found for $50-100 on Aliexpress or Amazon). To install: Move shifter to left (inbetween 1st gear and 2nd gear) Place Sequential Adapter in shift gate, between 3rd gear and…
Adding a little bit of grease smooths the action.
Set besteht aus Bodendüse, Schlauchverbinder (32mm) und dem Anschluss an die Ansaugdüse der Filterpumpe. Als Saugrohr dient ein 32mm HT-Rohr aus dem Baumarkt! Ich habe alles aus PLA gedruckt, da die Druckteile bei mir nicht dauerhaft im…
Two cases for the CheapinoV2 split ergonomic keyboard designed by tompi . PCB footprint was obtained from the keyboard designer's GitHub, linked above. Disclaimer: I am completely self-taught so far as 3D modelling goes, so there are…
4 new variants : #1 lsi-fan-bracket-v4-Finished Bracket No holes in the pillars v2.stl - Only holes in the pillars removed, for a Noctua fan #2 lsi-fan-bracket-v4-Finished Bracket Noctua Raised pillar v1.stl - For a Noctua fan, holes in…
This is an extremely cheap filament guide I made to prevent filament from grinding on the runout sensor on the CR10S Pro V2. I've used mine for hundreds of printing hours, though. It's bent a bit, but still works. I intended to replace it…
Does not account for ABS shrink! Edit: The [as of May 2025] upcoming Voron Trident R2 will include double shear! Rejoice! It also improves the belt path. Rejoice again! :) I suppose the Voron 2.4 eventually catches up, too (we all know &…
The CYD easily lifts off for access to ports and buttons on the back. The stand is mostly hollow. I printed at 15% infill, no supports needed and no screws or other fixings. I recommend a 0.8mm layer height to get good definition on the…
Needed a outer corner trowel for my garage isolation project. Couldn't find anything that would fit my needs, so I created this. No supports Quick print (around 2 hours) Can be easily printed in .28 layer height to reduce print time…
I created this collection for the cerealbox i use ( Link ) A scound reason for this was, that i hadn't found a good drybox with a easy and robust rewind function so i had to create this. A third reason for this was, that all the dryboxes…
Could be printed without support.
Case for the Cheapino ergonomic split mechanical keyboard with basic tenting. I do not know how to do CAD 3D modelling so it is a bit crude. There is no clip that holds onto the PCB for example. It relies on friction from the tight…
If blobs are seen on the strings between the posts, the filament is definitely wet. Strings are ok as long as they are smooth and fine.
The majority of razor stands are big, heavy and expensive to print. I designed a cheap and minimalistic one for my Mühle Rasierhobel/ Mühle razor plane. Instead of the original Mühle one, that costs around 25 Euro, my alternative costs…
Full credits to trutheframe ! I only did a quick change of the hole sizes to fit 10x3mm magnets I had at hands! The original is made for 6x3mm magnets in case you have these. Just fix it to your Bambu Lab AMS, your filament box or…
All the caliper holders I could find for the HSW were designed around the digital varieties. My analog version is much slimmer and didn't fit very well, so I came up with my own. Fits the Mastercraft Vernier Caliper ($10 at Canadian Tire).
Hello I created a print in place door hinge for the Bambulab P1P ( YouTube ). Right now I'm still testing those panels, so it's far from perfect at this stage. But it keeps the raw and industrial vibe the P1P offers, for a cleaner look…
Hiii just go into the parameters and adjust anything you like. I've included a 4x4 and 6x6 pre-exported vial holders for 11mm and 15.5/15.7mm vials
Another VR Gun stock for Onward, Pavlov, BAM, Battle Royal… Parts you will need: One inch wooden stick or PVC tube (approx 45cm is fine, but you can adapt it to suit your preferences) 2 x M4x20mm screws + 2 M4 Locknuts 2 x M3x16mm screws…
Watch your prints fail in incredible detail! After two entire iterations, here it is! I can't believe this monstrosity is the first thing I actually decide to share with the world. This allows the mounting of incredibly cheap USB…
This print is designed to be as cheap and easy as possible so you can spend less money on wall mounts/shelves and more money on Funko pops. Print as 3 separate parts then clip together and mount to the wall using a command strip.
WIP: work in progress, only for testing. With these parts you can upgrade your i3 MK3S+ (and similar) to MK4S with only printable parts: you can reuse all the 8mm rods, LM8UU and stock MK3S X-carriage (Toolhead). LM8UU spacer - print x2…
Last night I was stirring ~500ML of epoxy with a popsicle stick… Suffice to say it was not fun at all… 20 minutes later this adapter was born. This simple adapter allows you to use popsicle sticks with your drill. Sure, there are lots of…
We had to join 14 spot lamp wires - this custom 3D printed housing with 4x Wago 221-415 terminal blocks was the cheapest solution.
The printed ones on ebay have gotten quite expensive. This is intended as a cheap (temporary-ish) fix to get your walkman powered quickly. It was printed with no support or brim. 2mm layer height. PLA only so far. - Does not Fit Sony…
Hi, I have constructed my version of Xiaomi Mijia Bluetooth Thermometer Hygrometer bracket for my SAMLA drybox. It is also compatible with cheap popular chineese noname thermometer/ hygrometer. Just print, use double-sided tape and stick…
Outdoor Pet Fence - Cheap Cage Solution We looked for an bigger outdoor fence for our guinea pigs. I saw the cheap Wire Storage Shelves and construct save, strong connectors to build a unlimited fence out of them. The wire shelf with the…
Selbstbau einer Mähroboter Garage (Carport) für weniger als 20€ Materialkosten. Die Garage ist für den WORX Landroid WR165E und ähnliche Modelle zugeschnitten. Eine Anpassung für Roboter Modelle anderer Hersteller ist leicht möglich. Für…
Enclosure/electrical box for common cheap-o solar charge controller. The box fits the controller, place for optional 4010 fan(s) (on both sides) and 3 inlets for wires (fit for 20mm diameter wire hose). Box has ventilation holes on both…
Test for 0.4mm nozzle. Calculation example on screen shot.
This is a custom-designed enclosure for the Sunton ESP32-2432S028R development board, a popular and affordable (~$8) module available on AliExpress, Banggood, and Amazon. The board features an ESP32-WROOM-32 module and a 2.8-inch 320 x…
Deutsche Version am Ende. First I want to note some things Requires a printer that can print parts with a length of 300mm. The board is very cheap (sometimes below 50€) but has some issues, like the placements of the connectors and often…
Frankly I dont know why this design by Martin_au isn't the most popular mod for all 3D printers. It detects jams and filament runout without needing fancy LED motion detectors, special code etc., and only uses one microswitch For my remix…
!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! WARNING !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! Laser is very dangerous! NEVER use it without safety protection!! Even a cheap 250mW Laser can harm your eyes badly!!! If you dont have any safetygoggles, use at…
This is a Remix of the popular Enclosure for Sunton ESP32-2432S028R Cheap Yellow Display by mdkendall and the ESP32 Cheap Yellow Display (USB-C version) Enclosure (ESP32-2432S028R) by Michał that fits the Mini CD Drive Printer (V2.0) by…
Installation and Build Assembly parts per the instructions here: https://help.prusa3d.com/category/original-prusa-mk4-kit-assembly_1967 Notes for build: X-Axis belt will need adjusting, as the stock MK3S+ (Non-MK4) belts and extruder body…
Print 100% infill. Measured existing buckle and tongue from my cheapo kids watch and designed this. The picture shows only a replaced buckle and not the tongue, but I've tested the tongue as well (just don't have a picture). How I…
Use case This folding knife uses the ultra cheap “break-off” blades that are made for the sliding knives sold in home improvement stores. These blades are significantly cheaper than the trapezoidal blades that I saw being used in similar…
Modified backplate with larger clearances
This is very cheap (50-60eur in components) and very powerful power supply for laboratory/workshop use. It's made from 3 printed pieces from PLA/ABS or any other material, except flex. It will output adjustable 0-45.00V and 0-5.000A in…
Work in progress: I wanted to design the cheapest possible automatic plant watering system. You should be able to make this from things you have around the house plus less than $10 worth of parts. This design only requires a few purchased…
It's an adaptor for a cheap focuser to fit the Hadley telescope. In particular: https://www.aliexpress.com/item/1005003139555248.html?spm=a2g0o.order_list.order_list_main.16.65901802TIfIGr Uses m4 nuts and bolts 20mm - 35mm
housing for the cheap HU, wanted to make a portable tool battery operated player but it wasn't fully developed due to lack of time It could be at least used for a template, I have made a head unit model (fresh, not scanned) my other…
This Saddle replaces the rollers in @Extrutim 's Drybox | Cheap Filament Storage Box | Polydryer Compatible Dry Box to work with my Auto-Rewinder for Ultimate Filament Drybox to eliminate problems with tangled filament due to MMU ejection…
I've an old IKEA style, build it yourself, dresser. Unlike the ones they produce now, the bottom of the drawers is not made of MDF but is instead stiff cardboard. Over time, having had the drawers over-stuffed on occasion, the bottom…
Simple and easy to print. No support, 0.4mm nozzle, 0.2mm layer, material is PETG, infill 15% The result from the MK4S printer is very impressive. Not comparable to real linear guides but inexpensive, sufficient for simple applications…
A simple case, for a simple breakout board This ESP32 breakout board on Aliexpress : https://es.aliexpress.com/item/1005004476867346.html (Color: Adapter 38P) Onshape CAD link:…
This is a remix of a remix of the encoder cart in the Enraged Rabbit Carrot Feeder to act as a standalone filament motion sensor for your 3D printer. Unlike other filament motion sensors, it adds very little resistance. Also unlike a…
gap should be bridgable but I printed with supports. Scale model to 1000% if it seems too small. .16mm layer height works well. It has some ridges for some extra grippyness but you can't really feel it with a 0.4 nozzle. maybe lower line…
Remix of the enclosure designed by @mdzi to close of the side and bottom peripheral ports (except the USB ports) for a cleaner look when not using external IO devices. Huge thanks to @mdzi for providing STEP files which made remixing this…
Very cheap wedding rings. You can always say in your defense, that love has no price. Instructions Print in gold or silver plastic if you live in the hills. That filament costs as much as real gold! Category: Rings
Made in Tinkercad and rendered in Fusion 360 My YouTube Channel PARTS: You will need a 3D printer, Filament, Computer, Tinkercad account, GRBL CNC controller, Stepper drivers, 4 Nema 17 Stepper Motors, Stepper Motor Couplers, 8mm Linear…
Expand your small and cheap train track as far as you like with these clip-in track pieces. Use cutters to get rid of the support for the rail on the smaller end. Use 0,15mm Speed settings and 20% infill. Suggested material is PLA, but…
Designed Case for Cheap Lighters - Easy Print - No Supports Fits cheap lighters with dimensions ~ 65x23x11mm Printing Settings: Printed on: Elegoo Neptune 3 Pro Filament used: Devil Design Violet PLA Layer Height: 0.20 Parameters: 2…
