1,011 models
This Sierpiński Tetrahedron makes a great desk ornament. And it's math-y, if you like that sort of thing. Print Settings In this print I used: PLA 0.2 mm layers Paint-on supports 0% infill (a Sierpiński Tetrahedron has no volume)…
Print approx. €5.33–€6.52 excl. taxPreliminary estimate for one variant
This model prints flat, then folds into a dodecahedron frame. The inner sides snap together (as shown in the video below) to hold the shape without any additional connectors. Print in PETG (as PLA is not sturdy enough) at 0.2 mm layer…
Print approx. €1.13–€1.38 excl. taxPreliminary estimate for PETGSource material: PET
Creating a geometrical model like this using only solid tools in Fusion 360 would've been quite difficult, which is why this was a good opportunity to practice using the surface tools available in Fusion 360. For printing this model,…
Print approx. €8.63–€10.54 excl. taxPreliminary estimate for one variant
The famous twelve-sided platonic solid, created in FreeCAD. A platonic solid is a body where all the faces are identical in shape and size, with identical edges and angles, and the same number of faces meet at each vertex. There are only…
Print approx. €0.34–€0.42 excl. taxPreliminary estimate for one variant
A quick and nice geometric shape for decoration or test prints. Ideally to be printed in vase mode (2 parts)
Print approx. €0.22–€0.27 excl. taxPreliminary estimate for one variant
A quiet unique take on an ancient artefact, that can use as a fidget toy or as a simple sculpture for your shelf, I need to add to print that model not smaller as given and try to print it slow - in needs quite a lot of support, but…
Print approx. €10.75–€13.14 excl. taxPreliminary estimate for one variant
This model prints flat, then folds along the edges to form a rhombic dodecahedron. The inner sides snap together, as shown in the video below, to hold the shape without additional connectors. If you change filament mid-print, you will…
Print approx. €2.39–€2.92 excl. taxPreliminary estimate for PETGSource material: PET
The famous eight-sided platonic solid, created in FreeCAD. A platonic solid is a body where all the faces are identical in shape and size, with identical edges and angles, and the same number of faces meet at each vertex. There are only 5…
Print approx. €0.77–€0.95 excl. taxPreliminary estimate for one variant
A truncated icosahedron, in simple words just the model of a football. For this print you will need 20 hexagons and 12 pentagons and they will click together, I like printing in detail so I printed this with 80% infill and 0.1mm…
Print approx. €2.86–€3.50 excl. taxPreliminary estimate for PETGSource material: PET
A tetrahedron solid created in FreeCAD. A platonic solid is a body where all the faces are identical in shape and size, with identical edges and angles, and the same number of faces meet at each vertex. There are only 5 platonic solids in…
Print approx. €0.38–€0.47 excl. taxPreliminary estimate for one variant
We have had this lamp proudly displayed in our home in our foyer for nearly a year now and we get lots of compliments on it! It is super easy to print. This lamp assembles from 12 sides all printed flat on the printer's bed, which then…
Print approx. €1.77–€2.16 excl. taxPreliminary estimate for one variant
If you've looked for a painter's pyramid before, you're probably aware of the variety of designs out there. I faced the same situation and, while many models had great features, none quite ticked all the boxes for me. That led me to…
Print approx. €3.40–€4.16 excl. taxPreliminary estimate for one variant
Self-assembling "virus" (dodecahedron). Demonstrates how viruses self-assemble via symmetric interactions of subunits that have favourable interactions with each other. Original model (self_assembling_virus) is adapted from…
Print approx. €0.45–€0.55 excl. taxPreliminary estimate for one variant
Dodecahedron Display (Solid or Vase Mode) Printing Instructions Vase Mode: .3mm layer height Solid Mode: Recommended: .3mm layer height and lightning infill.
Print approx. €2.30–€2.82 excl. taxPreliminary estimate for one variant
Tetrahedron brain-teaser Print instructions Print from PLA. It may be necessary to grind the parts gently with emery paper. 3bals.stl print 2x and 3ball.stl print 4x. Object: Assemble printed parts to the shape of tetrahedron.
Print approx. €2.96–€3.62 excl. taxPreliminary estimate for one variant
Description: This is a DnD/TTRPG inspired bin I made for my partner. I first tried to make this with vase mode, but due to the angles the walls would begin to bend inwards. I will include the vase mode STL if you want to give that a try.…
Print approx. €18.88–€23.07 excl. taxPreliminary estimate for one variant
The famous twenty-sided platonic solid, created in FreeCAD. A platonic solid is a body where all the faces are identical in shape and size, with identical edges and angles, and the same number of faces meet at each vertex. There are only…
Print approx. €0.59–€0.72 excl. taxPreliminary estimate for one variant
Slightly inspired by this model (https://cults3d.com/en/3d-model/naughties/foreplay-dice), except when you try print text that is embosed to an angled side of the dodecahedron it looks like shit unless you make the dice really huge. Only…
Print approx. €0.49–€0.60 excl. taxPreliminary estimate for one variant
A truncated icosahedron is the only Archimedian solid that does not contain triangles and squares. It is often used to make geodesic structures by subdividing its faces into triangles. The icosahedral polyhedron can also be created using…
Print approx. €1.24–€1.52 excl. taxPreliminary estimate for one variant
The faces are printed one by one and connected using pieces of 1.75mm filament threaded into the hinges. The diameter is roughly 21 cm. For testing purposes I uploaded a small version. The fusion360 model can be easily modified. Read…
Print approx. €1.02–€1.25 excl. taxPreliminary estimate for one variant
I remembered this simple toy/trivial conundrum from my childhood, when it was quite well known but I realized I didn't see it around for a while. I got it first time from a fair and I still remember my 6-years old being so proud for…
Print approx. €1.80–€2.20 excl. taxPreliminary estimate for one variant
Used Fusion360 to determine the angles needed to modify Bob_East's SCAD file to produce connectors for other polyhedrons. I've included: Tetrahedron (4 faces), Hexahedron (Cube - 6 faces), Tetratetrahedron (regular octahedron - 8 faces),…
Print approx. €3.93–€4.80 excl. taxPreliminary estimate for one variant
I was interested in the Reuleaux Tetrahedron. You can find in the internet information in many places: i.e. https://en.wikipedia.org/wiki/Reuleaux_tetrahedron Also here is an interesting video: Also many models are available. There are…
Print approx. €7.08–€8.65 excl. taxPreliminary estimate for one variant
Malý hvězdicový dvanáctistěn Kepler-Poinsot mnohostěn
Print approx. €1.03–€1.26 excl. taxPreliminary estimate for one variant
Stellated octahedron (as same as the FCC lattece) Stellated octahedron, which is also called the stella octangula (eight-pointed star) is same as the face-centerd cubic lattice in material science. The face-centerd-cubic (FCC) lattice is…
Print approx. €1.77–€2.17 excl. taxPreliminary estimate for PETGSource material: PET
Icosahedron (20 sided polygon) with face divisions for class 2, frequency 10, spherical projection per method of “Geodesic Math and How to Use It” by Hugh Kenner 1970. This model can be printed with out supports. Also added a smooth faced…
Print approx. €12.20–€14.91 excl. taxPreliminary estimate for one variant
A pentagonal trapezohedron, a popular shape for 10-sided dice. Dimensions are based on adding pentagonal pyramids to a regular dodecahedron.
Print approx. €0.39–€0.48 excl. taxPreliminary estimate for one variant
Vytisknout ,očistit a slepit vteřinovým lepidlem.
Print approx. €0.46–€0.56 excl. taxPreliminary estimate for one variant
The Chestahedron (as described by Frank Chester) is a polyhedron with 7 faces. As described by Chester and in various construction diagrams, all the faces have the same area. Even though I used the same mathematical construction, I…
Print approx. €0.70–€0.86 excl. taxPreliminary estimate for PETGSource material: PET
The points of the star print in vase mode. Sometimes glue is needed.
Print approx. €0.08–€0.10 excl. taxPreliminary estimate for one variant
The model has been designed for a multi-color printer, but it's easy to limit printing to a single color by printing only the Dodecaedre v9.STL file contained in the Dodecaedre v9.3mf project file. For moncolor, all other STL files must…
Print approx. €4.33–€5.29 excl. taxPreliminary estimate for PETGSource material: PET
The classic Reuleaux Tetrahedron , which is NOT a solid of constant width. You can print the solid in the given orientation with 0 infill and the aid of very few supports (see the print file for my recommended settings). Printed at a 100%…
Print approx. €1.81–€2.21 excl. taxPreliminary estimate for one variant
A compact and functional holder for all sorts of memory devices. I was inspired by @3DHACKS's post (Cults). Although it was a bit big for me so I modelled a smaller version as scaling it would probably not work well with the holes. It…
Print approx. €3.51–€4.29 excl. taxPreliminary estimate for one variant
For the Prusa MK3/S, print 12 pentagons in either PETG, PLA or use the STL file to slice for your printer. I used PETG at 20% infill. Print time 41 minutes. Assemble the Dodecahedron using 60 small zip ties , 10cm in length. The angled…
Print approx. €0.51–€0.62 excl. taxPreliminary estimate for PETGSource material: PET
This project was created in Mathematica. It's trivial to create the STL file. Just evaluate these two lines of code (which can be done in one line a bit cryptically to someone who doesn't know Mathematica). Here it is: image =…
Print approx. €1.01–€1.24 excl. taxPreliminary estimate for one variant
I printed with 2 perimeters, but I think it is more durable than in vase mode. Material: Filament PM - Pearl Red PLA Nozzle: 0.4mm Layerheight : 0.2mm Support: No
Print approx. €1.05–€1.29 excl. taxPreliminary estimate for one variant
WARNING - CHOKING HAZARD! SMALL PARTS! KEEP AWAY FROM SMALL CHILDREN! INTRODUCTION This is a very satisfying sphere using the Hoberman mechanism. It is a truncated icosahedron, with 12 pentagons (5 sides) and 20 hexagons (6 sides) that…
Print approx. €6.73–€8.23 excl. taxPreliminary estimate for one variant
A connector for making a truncated icosahedron out of straws. The two sockets with flat bottoms are 108° from each other and form the outside of one of the solid's 12 pentagons. All pentagon edges are connected via one of these two…
Print approx. €0.12–€0.15 excl. taxPreliminary estimate for one variant
you will need 12 hubs and 30 sticks to assemble one complete icosahedron. The sticks should fit tight. The large flat face points towards the center. Seems to work well with 0% infill and 2 perimeters
Print approx. €4.14–€5.05 excl. taxPreliminary estimate for one variant
A connector to make an icosahedron out of straws. Uses the white part of the straw from boxed milk.
Print approx. €2.23–€2.72 excl. taxPreliminary estimate for one variant
I wanted to 3D print the five (5) Platonic solids for my granddaughter, but could not find on this site. Decided to create and share. Learned a ton by doing it this way. I encourage you to follow this (or similiar) vidoes. I sped up the…
Print approx. €13.58–€16.60 excl. taxPreliminary estimate for one variant
Paper drinking straw C60 connector can be found here: https://www.printables.com/model/204151-paper-drinking-straw-dodecahedronc20truncated-icos @ jmckeand did provide many toothpick connectors here ……
Print approx. €4.38–€5.35 excl. taxPreliminary estimate for one variant
dodecahedron
Print approx. €1.31–€1.60 excl. taxPreliminary estimate for one variant
08/24/2025 - V2 Update, now with cleaner printing. Tweaked the orientation of the key switch holes to both provide better support for the top side and avoid the bad overhangs on the outside. I also adjusted the interior of the model so…
Print approx. €1.55–€1.89 excl. taxPreliminary estimate for one variant
I came with this tetrahedron while learning the basics of Fusion 360. Supports were quite hard to remove, but I'm happy with the results. Could be used as a sturdy painters pyramid or as keychain. If you need modifications or have any…
Print approx. €0.18–€0.22 excl. taxPreliminary estimate for one variant
I printed @jgentry's model and the tee failed even with a brim. The can fit and the surface finish wasn't to my liking and I thought the ergonomics could be improved. I found Steen Winther 's golf ball model and remodeled the koozie…
Print approx. €27.96–€34.17 excl. taxPreliminary estimate for one variant
A connector to make a tetrahedron out of straws. Uses the white part of the straw from boxed milk.
Print approx. €0.15–€0.18 excl. taxPreliminary estimate for one variant
Inside this Dodecahedron there is a maze that has to be passed with a small 5mm ball. Print instructions Print without support standing on the "End" hole.
Print approx. €3.60–€4.40 excl. taxPreliminary estimate for one variant
Carved Elk Skull with Bonus Cattywampus Ornate Icosahedron. Because why not. All AI Generated.
Print approx. €18.35–€22.43 excl. taxPreliminary estimate for one variant
The cuboctahedron is unique among polyhedra as the only shape with all edges equal to each other and equal to the circumradius. Buckminster Fuller referred to it as the unit singularity
Print approx. €1.96–€2.40 excl. taxPreliminary estimate for one variant
The Jewel Dodecahedron is a variation of the Face Turning Rhombic Dodecahedron twisty puzzle, with cuts which expose internal pieces that would usually be hidden. The cuts give the puzzle a crystal appearance, hence the "Jewel" name. Want…
Print approx. €1.74–€2.13 excl. taxPreliminary estimate for one variant
A very simple yet fascinating fidget desktop toy. A perfect sphere trapped inside a hollow dodecahedron, sometimes called a ball in cage. The sphere is just about bigger than the dodecahedron windows giving the illusion that the sphere…
Print approx. €3.96–€4.84 excl. taxPreliminary estimate for one variant
OpenSCAD model of a Sierpiński Tetrahedron, inverted, and 3D-printable without supports! Out of four prints, I've had one break during printing, when using a 0.1mm layer height, which was likely just poor clearance and maybe a bit of…
Print approx. €1.26–€1.54 excl. taxPreliminary estimate for one variant
This is a geometrically accurate Tetrahedron modeled in Autodesk Fusion360. The model is provided as two versions with either 0.75mm fillet or 0.75mm chamfer placed on all edges. Two gcode files are provided for each, a single model and…
Print approx. €0.73–€0.89 excl. taxPreliminary estimate for one variant
This stellated regular polyhedron prints flat, then folds along each edge to the dihedral angle for a regular dodecahedron. You can hold the sides together (except the last one) by securing them with zip-ties through the holes as shown in…
Print approx. €4.02–€4.91 excl. taxPreliminary estimate for PETGSource material: PET
Print and fold I designed this as a cat toy, but the cats seem to prefer a plain dodecahedron or icosahedron prints with no supports, 0.2mm layer height, 2 perimeters and low or no infill, 5 top/bottom layers - use more perimeters and…
Print approx. €2.62–€3.21 excl. taxPreliminary estimate for one variant
A connector to make a dodecahedron out of straws. Uses the white part of the straw from boxed milk.
Print approx. €0.19–€0.24 excl. taxPreliminary estimate for one variant
A connector to make an octahedron out of straws. Uses the white part of the straw from boxed milk.
Print approx. €0.16–€0.20 excl. taxPreliminary estimate for one variant
This is followup on creating regular dodecahedron with 12 regular pentagon faces, with edges of toothpicks: https://forum.prusa3d.com/forum/english-forum-awesome-prints-hall-of-fame/toothpick-polyhedra-fullerenes/#post-606910 Dodecahedron…
Print approx. €1.75–€2.14 excl. taxPreliminary estimate for one variant
Magnetic spheres are used to make 3D printed polygons that can be used as an educational math tool, a fidget device, or a unique set of magnetic building blocks. The polygons can be used to make polyhedrons and other fun shapes.…
Print approx. €0.21–€0.26 excl. taxPreliminary estimate for one variant
Printed as flat surfaces with connected segments that can be built up into three-dimensional geometric figures. Construction of the hinge is shown in the picture. I wish a lot of fun with the model and good luck with the reconstruction!…
Print approx. €0.63–€0.76 excl. taxPreliminary estimate for one variant
Star Dodecahedron (Solid or Vase Mode) Printing Instructions Vase Mode: This can be printed at .3mm but it creates an interesting decorative defect at the bottom of the bottom star. This may not be for everyone. If you don't like the…
Print approx. €2.35–€2.87 excl. taxPreliminary estimate for one variant
A model of a truncated icosahedron sliced at 5/9ths of the diameter. The fractions may be confusing since the diameter is typically measured point to point rather than face to face; joining a 3/8 dome will form a complete truncated…
Print approx. €0.61–€0.74 excl. taxPreliminary estimate for one variant
This model is a 2 frequency breakdown of an icosahedra. The procedure I followed was from “GEODESIC MATH AND HOW TO USE IT” by Hugh Kenner, 1970 edition. Method is chapter 10.
Print approx. €8.51–€10.40 excl. taxPreliminary estimate for one variant
Own construction according Video of George Hart http://georgehart.com/sharp/. 6 rhombi and 12 kite-shaped faces. 300 years ago invented but never constructed in the meantime until this days. stl files of 3 different sizes made from a cube…
Print approx. €0.35–€0.42 excl. taxPreliminary estimate for PETGSource material: PET
Make a Truncated Tetrahedron structure from 4 identical L-shaped pieces made with Rhombic Dodecahedrons. The pieces can be printed without supports and have a 0.25 mm spacer between the rhombic dodecahedron units, so they stay together…
Print approx. €1.57–€1.92 excl. taxPreliminary estimate for one variant
A model of a truncated icosahedron sliced down the middle.
Print approx. €0.50–€0.61 excl. taxPreliminary estimate for one variant
Velký dvanáctistěn Kepler-Poinsot mnohostěn
Print approx. €1.25–€1.53 excl. taxPreliminary estimate for one variant
What would our standard cube packing puzzles look like if we used cuboctahedrons as the base unit instead of cubes? Obviously, when you are cutting wood, cubes are much easier, but we have 3D printers now! Stewart Coffin's Half-hour…
Print approx. €7.11–€8.69 excl. taxPreliminary estimate for PETGSource material: PET
You will need 12 hubs and 24 popsicle sticks to assemble the cuboctahedron. the fit should be tight and the sticks won't slip out. There is also center facing slot for optional radial sticks. The large flat face points towards the center…
Print approx. €4.27–€5.21 excl. taxPreliminary estimate for one variant
Printing: The cube should print without support with proper bridging. I separated the objects and laid the tetrahedron flat on the print bed with my slicer. Design: This is a well known puzzle. I designed a new SCAD program in Rust and…
Print approx. €2.28–€2.79 excl. taxPreliminary estimate for PETGSource material: PET
Customizable top, screwed cap on bottom, clip-on two pieces from a perfect dodecahedron . You can see my other banks-o-box and her swiss front side style too ! Warning , to beward top mesh, mount the box top on the table and bottom on the…
Print approx. €0.60–€0.74 excl. taxPreliminary estimate for one variant
I made this for a larger printer but you can scale it down as i did to 50%
Print approx. €2.57–€3.14 excl. taxPreliminary estimate for one variant
A model of a truncated icosahedron sliced at 8/9ths of the diameter.
Print approx. €0.90–€1.10 excl. taxPreliminary estimate for one variant
A model of a truncated icosahedron sliced at 3/8ths of the diameter. The fractions may be confusing since the diameter is typically measured point to point rather than face to face; joining a 5/9 dome will form a complete truncated…
Print approx. €0.40–€0.48 excl. taxPreliminary estimate for one variant
WARNING - CHOKING HAZARD! SMALL PARTS! UPDATE There is an updated version of this model: https://www.printables.com/model/1123105-truncated-icosahedron-v20-hoberman-sphere I have wanted a Hoberman sphere since forever. Now, in this…
Print approx. €6.54–€8.00 excl. taxPreliminary estimate for one variant
Eight (8) equilateral triangles are joined at vertices. Used Fusion360, and help from demonstrations on Youtube. It is fun and easy to print. Material does not matter. No support nor brim needed
Print approx. €1.20–€1.47 excl. taxPreliminary estimate for one variant
3 variants of Tetrahedron puzzles, each made of identical pieces.
Print approx. €0.83–€1.01 excl. taxPreliminary estimate for one variant
Magnetic spheres are used to make 3D printed polygons that can be used as an educational math tool, a fidget device, or a unique set of magnetic building blocks. The polygons can be used to make polyhedrons and other fun shapes.…
Print approx. €0.13–€0.16 excl. taxPreliminary estimate for one variant
I decided to make some miniprints models for fun.
Print approx. €0.14–€0.17 excl. taxPreliminary estimate for PETGSource material: PET
Part 2 of the geometric series. It will be a great addition to your desk, showing all the cool things 3D printers can do
Print approx. €2.25–€2.75 excl. taxPreliminary estimate for one variant
I use CHEPs fast profile with a .28 layer height. Mine is done on an Ender 3 PRO If you want to scale it up, consider thickening the walls.
Print approx. €8.98–€10.98 excl. taxPreliminary estimate for one variant
I wanted to 3Dprint phone stand based on simplest 3D polyhedron, the tetrahedron. It turned out to be too difficult for me doing “pipe edges” with Freecad, so I used OpenSCAD, and was surprised how easy this model was if you get it right…
Print approx. €0.82–€1.00 excl. taxPreliminary estimate for one variant
All about truncated tetrahedron can be fined at Wikipedia .
Print approx. €0.43–€0.52 excl. taxPreliminary estimate for one variant
LIKE SHARE COMMENT AND LEAVE A TIP OF COURSE this is designed for connecting tubes 50mm OD when printed 1:1 scale, this way you can form large dodecahedron lettice molecule-like structure for kids and silly grownups. it is easily scaled…
Print approx. €5.33–€6.51 excl. taxPreliminary estimate for one variant
An ornament made from a Pentagonal Icositetrahedron. This was printed with a brim but without support.
Print approx. €2.42–€2.96 excl. taxPreliminary estimate for one variant
This model works just like the Dodecahdron it is remixed from, though it is necessarily a bit smaller to be able to fit 20 faces flat on the print bed. Once printed, the shape folds along each edge to the dihedral angle for a regular…
Print approx. €3.45–€4.21 excl. taxPreliminary estimate for PETGSource material: PET
This model prints pretty well, however I found that if you want to have a good glue seam when combining the pieces to form the compound of dodecahedron and icosahedron it is worth sanding the edges on each side of the triangular pieces.…
Print approx. €4.06–€4.96 excl. taxPreliminary estimate for one variant
While learning Fusion 360 I tried to model a tetrahedron. I decided to build upon that shape to try more advanced functions of Fusion 360 and to model something for the Eyeglass Holder contest. This modern / futuristic and abstract object…
Print approx. €3.73–€4.56 excl. taxPreliminary estimate for PETGSource material: PET
A model of a truncated icosahedron sliced at 2/9ths of the diameter.
Print approx. €0.18–€0.23 excl. taxPreliminary estimate for one variant
Simple flower pot cover with eight walls outside. Inside dimensions: diameter 100mm, height 72.5mm
Print approx. €9.37–€11.45 excl. taxPreliminary estimate for one variant
Magnetic spheres are used to make 3D printed polygons that can be used as an educational math tool, a fidget device, or a unique set of magnetic building blocks. The polygons can be used to make polyhedrons and other fun shapes.…
Print approx. €0.36–€0.44 excl. taxPreliminary estimate for one variant
A dodecahedron node with a threaded hole in each of its 12 faces to screw a fizzy drinks bottle into. If you are a bottle thread enthusiast the standard is PCO 1881. If you are not, then all you need to know is that it will work with…
Print approx. €7.03–€8.60 excl. taxPreliminary estimate for PETGSource material: PET
The Concave Rhombic Dodecahedron is a novel version of the well known (convex) Rhombic Dodecahedron and inherits many of its amazing mathematical properties: Universal: One shape does it all, print as many as you want! Stable: The pieces…
Print approx. €4.67–€5.71 excl. taxPreliminary estimate for one variant
The rhombic dodecahedron has, as intimated by the name, 12 faces, which are rhombi of which the major axis is longer than the minor axis by a factor of 1.414.. (sqrt(2)). Similarly, when 30 golden-ratio (1.618...) rhombi are assembled…
Print approx. €3.37–€4.12 excl. taxPreliminary estimate for PETGSource material: PET
Build an open top 12 sided model with these panels. Tie together with zip ties.
Print approx. €0.61–€0.74 excl. taxPreliminary estimate for PETGSource material: PET
Alternative set of hollow pieces for HedronStack balancing game. You can see through them, if you print with transparent filament, you may be able to see through the sides partially as well. You can either replace original pieces with the…
Print approx. €2.33–€2.84 excl. taxPreliminary estimate for one variant
This is a stacking game where players carefully place complex 3D pieces onto a growing structure, judging alignment, weight distribution and stability. While the goal is to build higher than your opponents, pushing the structure too far…
A very useful tool when treating surfaces, e.g. woodworking. With these tetrahedrons both sides of the board can be treated immediately. Only minimal traces are left at the contact points. They are about 20mm high and as it is a…
Hello everyone, thanks for stopping by! The aim of this project was to create a dual color chainmail and I really like tetrahedron (three sided pyramid) so I decided to go with it. The chainmail consists of lower hexagon link piece and…
