Counting matching models…
I put together this hanger to have a place to store all of the attachments for our KitchenAid stand mixer. The pieces press-fit together... I secured mine to our cabinets using 3M double-stick tape, which serves two purposes... keeping…
Just a hanger for kitchenaid mixer attachments. You'll need #6 countersunk screws to install them. (I only had #8 screws on hand so the screw heads are sitting a bit proud in the photo) Edit: added the step file for anyone who wants to…
I have a pedestal drill, but it is guarded by two fearsome miniature goats, and it's not suitable for every project. I wanted a way to use my hand drill accurately for quick jobs, by adding a way to ensure holes were straight/square, plus…
Stärke: 6mm Gedruckt auf Prusa MK4 Print: 0.2mm Nozzle: 0.4mm Support: Not needed Brim: Not needed Infill: 15%
The vice can be adjusted in two different angles and there are several attachments that you can easily change, if you don't like the attachments I have made you can make one yourself, with the drawing with the dimensions as a PDF in the…
The must have tool for your workbench !!! Only 3,52 gram's !!!
This is a full remix of the excellent Dyson tool wall mount bracket by richieclarkie ( https://www.thingiverse.com/thing:4097193 ). I needed a stronger version because the brackets with screw holes had a 90-degree angle which was a weak…
— Updates — 27/08/2023 - Okay, I've had quite the busy year 😅 So I'm finally getting around to creating lower flow versions as well as looking at different threads and integrating washers for a tighter sealed fit. Should be around a month…
router attachment for dremel
Intended to be mounted under kitchen cabinet for storing mixer attachments. Secured with 2 screws. Intended to be printed on its side with supports.
Although these are standalone accessories, they were created with my "Gutter Square Downpipe Diverter Twin Access" in mind : https://www.printables.com/model/1637492-gutter-square-downpipe-diverter-twin-access Parts Required To Purchase :…
Osteranhänger für den Osterstrauß weitere Modelle: Osterei mit Schneeglöckchen Küken im Osterglockennest Osterhase mit Pinsel Osterhase mit Eiern Ei mit Tulpen Osterhase mit Schmetterling Osterei mit Maiglöckchen Küken und Maiglöckchen…
attachments for the Kaercher WD series vacuum cleaner. the head attachments slide on and off so no alteration needed. will also fits any unit that uses 35mm attachments support needed for most of the attachments. step fil include feel…
This simple attachement will let your Benchy float in less than an hour of printing time! I printed mine with NO INFILL , and i recommend using tree supports , they are very easy to remove. Please make sure to check out my other benchy…
The current mount contains very thin walls, therefore it is very fragile, I redesigned the mount, now it is monolithic.
Holds 4 panels together.
Reccomended model: Medium Flow Try printing in TPU/PEBA or other flexible filament for a good seal, otherwise, I cut a small gasket out of paper which worked well. I have also included a Gasket model which can be printed out of flexibles…
I used Lucky 13 part “armature abdomen” for the tail segments, but you can use whatever part you want! You can even just use it by itself to make a cute little bunny tail.
Hose adapters for the Dyson V6 series. Options are: 1"(25.4mm) to 2"(50.8mm) Nozzle attachments of various sizes and shapes. Wall thickness of 2mm Straight, 30deg, 45deg The V7+ Dyson's have a more complicated connector on the nozzle…
I was looking for an Raspberry Case that could fit the Pi and a Stepdown (Buck) Converter to power the Pi directly from the power supply of my MK3S. I couldn't find anything I like so I decided to create my own. I designed 2 versions of…
The hek lok requires no hardware to attach to the belt, but can use standard tek-lok hardware or M5 nuts/bolts to attach various items to the clip. Print instructions: PETG is an ideal material for the repeated flex of the clip, though…
This small model will make your benchy look much cooler in less than 20min of printing time! Please make sure to check out my other benchy attachments as well!😊
This scope attachment allows you to shoot and record scope view simultaneously. It uses a semi-transparent mirror to send part of the light to the camera and the rest to the shooter's eye. The attachment is a modular design consisting of…
Description This upload contains several CAD models of electrical switch components compatible with Busch-Jaeger Reflex SI . All parts were independently modeled based on real measurements of existing components. They are not original…
Butterfly bodies in which a folded banknote can be put as fanned wings. The butterflies can be stuck into a flower with a wooden skewer (shish kebab or similar). The wooden skewer used in this case is about 3mm thick. Suitable for all…
In the area that I live, various attachments, such as spray heads, for commonly used drinking water bottle can be found in shops. Hence, I was inspired to make a spout attachment for watering plants. I took the easy way in designing this…
🌊 🐠 Welcome Under the Sea! 🧜 🔱 You have the honor of visiting King Triton's Palace Under the Sea!! A majestic building of towering spires and impossible arches awaits your gilled friends. Dive in to learn about the features of this…
These are mounting blocks to mount your makpac boxes to something. I built them to mount my makpacs to a roller board. They are designed to fit on a 300x400 mm board. To mount your makpak just press in the front side, and the push down…
Designed based on the handle of a Dewalt DCF787. I cannot confirm whether this will fit other Dewalt tools. Features Positive retention on the bits so they do not fall out Produces a satisfying snap when bits are inserted into the holder…
UPDATE 14.12.23 Added supportless=true settings in insertAttachToWallEmpty(), which allows printing the model without supports. Description This is updated version of OpenSCAD library for HSW attachments - added metric nuts inserts from…
This is a simple mod for your MK3 to use it as a penplotter. The main design objective was for it not to interfere with printing and to not have to assemble or disassemble any parts to change from one to the other. I tested multiple…
Since I did not manage to adapt the parts well to my caliper by scaling, I have designed them from scratch. It now fits for my caliper which is 3mm thick. Because I noticed that there is a slight offset to the reference plane (zero…
I was inspired by a recent model upload to create a parametric paint mixer. This model with associated Fusion 360 CAD file turned out really well. You can customize the width, height, blade thickness, bore hole diameter, bore hole length,…
My wife needed a way to securely hold her Airwrap attachments and wasn't finding anything she liked here or for purchase so I designed and printed these. I hope they work for everyone. I printed the shelf with the hooks on it's back with…
NOTE: Please honor and adhere to the license of these models. Commercial use is prohibited and not allowed. Three router attachments for Dremel rotary tool, with different stabilizer bases. These models were inspired by the design on…
I wasn't paying attention and put the wall anchor in the wrong cell… Printed a new variant of the 4-Insert Countersunk piece, with the attachment portion in a different location. I believe between the original and this modification, all…
🐉🔥 WallArt – How to Train Your Dragon 002 Take to the skies and bring the magical world of How to Train Your Dragon to your wall! This detailed WallArt is inspired by the unforgettable world of dragons, Vikings and epic adventures. The…
Summary Customized attachments for the Wolfbox MF50 dust blower for individual areas of application (keyboard, notebook cooler, all types of filters, etc.) Print 0.16mm layer height 3 outer walls / perimeters 15% infill supports are…
The perfect print to customize your benchy and make it look cooler in less than 10 minutes! I recommend using support for the flag itself It's also perfect for testing your bed adhesion! Please make sure to check out my other benchy…
ryobi_shaft_protector.stl A protective cover to attach to the battery, protecting the contacts from short circuit. ryobi_shaft_with_contacts.stl A shaft attachment to hold 8mm contacts onto the battery for use in other projects. The…
The butterfly prints on it's back. I've used the textured sheet to give the wing a nice texture. MMU for inner wing: The inner wing parts are designed to be translucent with just 0.4 mm thickness. If you want to make it thinner, feel free…
This allows you to attach a pen to your ender 3 S1 extruder. This enables you to let the printer write or even "draw" on a piece of paper. 2xM3 screws are used clamp the pen down This project works with any pen with a diameter smaller…
Watering Attachment Options for the Moss Pole ( Original (118mm) & Petit (70mm) ) by MochPoch Decided to separate the optional accessories of the climbing support system so that the original listings are not cluttered. New Bamboo moss…
Hi, to download Moser Hair Clipper Attachments, and adds attachments: 2mm 4mm 7mm 10mm 14mm 17mm 20mm Hair Clipper is my production from the beginning of the planning stage to the final stage, printed, corrected until satisfactory results…
This case can house a Raspberry Pi 4 together with an buck converter (stepdown). That way you can easily connect the Pi to your 3D Printers PSU or any other device that supplies between 5V-40V. I designed 2 versions of the case, one that…
Improves grip on string launcher handle. Can pull the loop or just hold as normal with some more surface area. Snaps on and off if needed. Let me know your thoughts or suggestions!
The build plate drip attachment is compact and avoids touching the VAT below it, so there's no need to remove it.
Cutter holder that holds up to 3 pliers/cutters based on the 1 and 2 holder designs by @Horacio.
Zusätzliches Material: für die Messstab-Halterungen werden 2x Sechskantschrauben M6x20mm benötigt nach Bedarf ein O-Ring für den Staubsauger-Adapter Hinweise: Alle Teile können ohne Stützmaterial gedruckt werden Die Gewindestutzen auf der…
I made this originally for my significant other who's stethoscope loves to wander away from them when they float around the hospital. Their may be others like them out there, so hopefully this comes in handy for them as well! For those…
A nerf bipod attachment that I made a few years back, not my best work but it serves its purpose
This is a set of chess pieces originally designed by Herman Ohme in 1953. Models were made with the most careful reproduction of the original design and taking into account the easiness of printing. The height of the tallest figure (king)…
Ive designed something to clamp over the existing guard on a bosch 115mm angle grinder then clamp your angle grinder to a bench to sharpen 12mm, 10mm, 8mm, 6mm, 5mm, 4mm drill bits 2x 90mm 8mm bolts & nuts required. mine are my usual CF…
It goes by many names, but it’s a timeless classic all the same. This design draws its aesthetic from the iconic M203 and fits cleanly under the already popular MK18 Mod 1, making it a devastating upgrade for your Dummy 13 military units.…
Gnome who operates Norman's left leg Shmebulock with a bottle, download here: cults3d.com/en/3d-model/art/shmebulok-gravity-falls
Simple grinding attachment for Dremel. I need to grind some pins and tubes so they have as much perpendicular ends as possible. This simple tool helps to support my freehand grinding. The mounting face is printed separately because it is…
This tool is to hold the laser focus spacer used on the Falcon 2 22w laser engraver from Creality. I wanted to make sure I didn't misplaced the tool - attaching it to the front of the unit is the obvious choice as it's accessible event…
Festool Mobile drilling attachment MB 40 - Accessories Do you already know our Mobile drilling attachment? The MB 40 mobile drilling attachment is your companion when precision is required. Print your own Festool Accessories for the MB 40…
This is a remake of the original, linked. You will need the cable mount to attach the chain. This is the part that mounts to the frame of the Elegoo, that you then glue the cable chain mount to. Comments/suggestions are welcome. Thanks!
Introducing the Milwaukee Leaf Blower Gutter Cleaning Attachment, your ultimate solution for maintaining clean gutters without the need to climb onto your roof. This innovative printable file is designed to make gutter maintenance easier…
An attachment to use with a shop vac with a 35mm nozzle (eg Kärcher, but possibly others), useful for wet cleaning carpet and upholstery. The attachment area is conical so it creates a snug fit. Print with 100% infill, this needs to be as…
Update 2-16-24: I recommend using gorilla glue clear polyurethane glue to attach the TPU gasket to the main collector. Other glue types don't really like to stick to both PLA/ABS and TPU. update 11-17-23: I have added an adapter to make…
Edit 2023-06-15: Added tolerance parameters to make it easier to fit your parts into the wall. I wanted to create some of my own attachments for the excellent Honeycomb Storage Wall, and I'm primarily an OpenSCAD user. Here are some parts…
Track your furry friend with ease using this collar/strap attachment designed to hold an Apple AirTag. The ergonomically rounded corners ensure that your pet won't experience any irritation, and the minimal profile prevents the attachment…
Attachment for vacuums to collect dust when drilling. Sticks to the wall while vacuum is on. Made for Ryobi portable shop vac (R18PV-0), but probably fits many others. Contact med for STEP files if you want to modify.
If you like my work and want to support me bringing you new content please consider supporting me on Patreon https://www.patreon.com/FotisMint Pre-Supported .stl and .lys files for resin included by Charro Zuck support services.
Is the wand on your Dyson vacuum all loose and jiggly? Well, this is just the fix. Designed to fit into the wand end and take up some of the slack. Over time my Dyson vacuum has worn out and become quite loose. I designed this spacer to…
Made an attachment for the cheap helmet I found online. It has the tactical railings and NVG holder so I wanted to try to make an Oculus helmet of sorts just as an experiment. V1: The locking mechanism for the NVG mount just slots in…
This is a shortened dryer lint vacuum attachment to clean out lint that gets past your dryer lint trap. I just did it on my Samsung dryer and got a little bit out that looked kind of old so I'm glad it's clean in there. I used my older…
Hey hey fellow Nerfers! I present to you the Pick-Rocket 2 (or the “Tactical Brick”, as I like to call it). This is a reshell of the Xshot Micro 1.0 (the previous version). You can use it as its own blaster or as attachment for your Nerfs…
These wheels should be much cheaper to make and more practical than the Dolly Trolley as you can lift the whole stack of cases and the wheels will stay on the stack. I have a stack of 4 cases and it rolls without any problem, I would not…
Ikea brought out their gaming range of products, including the LÅNESPELARE, which is a mug / cup holder that mounts to a desk. I figured I could do better, so here it is. This takes an M10 hex-head bolt and has two different sized holders…
Holder for Bosch Professional 12V GSR Drill FlexiClick Attachments (Drill chuck, L-piece, etc.) Also see my other Holder for the 12V Drill iteself. Printed with Prusament PETG (Prusa orange). No supports, I printed with 25% linear Infill…
A good looking Creality K1 Max Carbon Filter Attachment that fits most sponge type activated carbon filters that can be cut to size. There is also an option if you'd like to do a sponge type filter as well as carbon pellets. Hardware: -6…
Behold the ultimate mashup of music and miniatures – a Funko-style Marshmello model that’s ready to drop beats on your shelf! This quirky 3D print captures Marshmello’s signature look with an oversized head, minimalist mask, and a playful…
Print with 0.15 mm layer height in PLA or PETG. 15% Infill. A small amount of post processing might be necessary to get smooth attachment and detachment. See drawing for dimensions. Revision Notes: R06 - original release. (Photos) R07 -…
Recommended size is about 6 x 6 cm for 0.4 nozzle. Smaller sizes should also be possible. I printed it as name tag with an 0.25 nozzle.
A fishing line spool with a drill bit attachment.
Additional Hardware: 2x Heat Insert M4 1x Screw M4x12 or longer The lower thread is for attaching optional Guides or Grips.
This is the shard attachment and sheath upgrade to the Anduril/Narsil dice blade. You will find the original blade and the rest of the parts here: https://www.printables.com/model/335226-andurilnarsil-rpg-dice-blade
Update: Unfortunately, I've received word from the original designer that the print in place tracks are no longer available for use in my remix. However, you can still find them for purchase on Cults3d. Despite this setback, I believe…
Screw this puppy onto your dremel, adjust your bit depth, and route away to your heart's content. I liked the attachments that Cooch made in http://www.thingiverse.com/thing:5819 but wanted something that would screw firmly to the dremel.…
A hanger for Stihl motor head attachments. Print instructions Category: Tools Print Settings Printer Brand: Prusa Printer: I3 MK3S Rafts: No Supports: No Resolution: 0.1 Infill: 30% Notes: Printed with 0.4 nozzle and four perimeters in…
Hi all lovers Easters time I maked cute Bunny /Rabbit with Flower, Butterfly with Stand. New model coming soon :-) Happy printing Do you want this model sell? Write me :-)
Tis model doesn't utilize the external mounting points (used for plant supports and circular lighting upgrade), instead clamps on around the tower itself. Thus you can easily adjust its position. It can also be installed alongside with…
About An attachment that holds Loop Mute rubber inserts, compatible with original Loop Earplugs case. I have always wanted a way of carrying the Mute rubber inserts to further reduce noise when needed, so I designed this attachment that…
The SKADIS Universal Mounting System (SUMS) is build upon the IKEA SKADIS board and used a standardized peg system. With this system, you can use one type of peg to attach various types of attachments. If an attachment is no longer…
1:16 scale weapons pack for F-16 This is a pack of additional weapons to supplement this f-16 scale model that includes a somewhat accurate model of the following: AIM-9L Sidewinder AIM-9X Sidewinder (same as included in the F-16 model)…
Dyson Supersonic Hair Dryer Stand With Attachment Storage 2x Din 988 45x55x0.5 (neds to be glued in place) 2x Ruthex M4 short 1x Ruthex M4 2x M4 x 12mm (countersunk screw) 1x M4 x 8mm (countersunk screw) 0.4mm nozzle - 0.2mm layer height…
These are two paint mixing drill attachments that will use the power of your drill to mix spray can paints/primers, as well as model paints. They are inspired by one of Adam Savage's favorite tools: The spray-can mixer model can accept…
Description: Enhance your drilling operations with this attachment that ensures a dust-free working environment. Its sturdy construction and integrated grid effectively prevent the spread of drilling waste. It’s the perfect addition for…
This is an easy-to-print, ultra micro table saw attachment for most hand held rotary tools; ideal for ripping PCBs and other thin or delicate materials. Distance between the cutoff-wheel and rip fence can be adjusted to anywhere between 0…
Corner attachment for small clamp I'm using it to hold small boxes while gluing or nailing them together. Very handy!
This needs 2x M3x6mm SHCS and 2x M3 nuts, print all parts without supports. Press the M3 nuts into the inside of the stock point, then screw the SHCS through the picatinny, through the stock point and into the nuts. This attaches to the…
This is an attachment for the Makita trim router for edge band trimming. It is designed to use with a 0.5" bit. The mounting plate allows for micro-adjustments to allow for a perfect trim. I use a bullnose router bit to avoid an edge…
This is used to attach a Honeycomb Storage Wall (HSW) tile to a wall using M5 bolts. It's very similar to the M3 attachment object included in the HSW project, but with larger holes and a “cone" used to convert the countersunk holes into…
I use the Fast-Operation Vise for soldering circuit boards but wanted to lock down the vise to my table. I generated two cutouts in the left and right base parts along with a 3mm hole to pin down the vise. This way you can attach the legs…
I needed a very strong basket to hold various things like LIPO Battery and oil, spray bottle, etc.
Scissor holder front load with full size hex attachment. The original stl has a 6mm front slot, which fits my scissors. I added a second stl with a bigger 10mm slot just in case your scissors are a little thicker.
