Counting matching models…
News 2024-04-10: Please also check out my new Blade Dispenser for this Bed Scraper: This is the XL version of my popular Optimized Bed Scraper with quick-change blades. The cutting edge of the blade is 45 mm, a full 30% longer! Each blade…
Print approx. €2.16–€2.64 excl. taxPreliminary estimate for one variant
Strong shelf brackets designed to hold a 300mm deep shelf board! These were made with Fusion 360's topology optimization feature for the unique look, but they're definitely not too shabby in the strength department, either. Each one holds…
This Project is Outdated! For the latest Revisions check out: Stackable Storage Boxes – 2024 Update The following description is no longer updated: Discover my specially designed storage boxes, meticulously optimized for 3D printing.…
Enjoyed this model? Support me at buymeacoffee.com/fifindr to keep the designs coming! Tip is thinner, handle with care! Keep your charging ports spotless with the Port Cleaning Tool V2! This optimized version is specifically designed for…
Print approx. €0.04–€0.05 excl. taxPreliminary estimate for one variant
I love the look of these shelves, check how Tom created them: However, I wasn't a fan of the uneven and paper-thin back (even though I believe mechanically it doesn't matter). So I've made it completely flat and a bit thicker. I also went…
Print approx. €7.17–€8.76 excl. taxPreliminary estimate for one variant
Update 25/08/2023 v1.2 added - access for heat break setscrew created, small amount of material added on the fan-side of the grille near the bottom to ensure proper clearance to heatsink fan. Update 11/04/2023 v1.1 added - probe bracket…
Print approx. €0.08–€0.10 excl. taxPreliminary estimate for one variant
The balloon powered car is intended for teachers and students as an aid in explaining the terms "energy conversion" and "Newton's 3rd law". To make a car you need: -3D printed car model -3D printed wheels (4 pieces), wheel V2 (3mm hole,…
Print approx. €0.68–€0.83 excl. taxPreliminary estimate for one variant
This is the 2024 update of my storage boxes system, with the latest revisions (D, E) of the storage boxes. For the older revisions, please have a look here . Discover my specially designed storage boxes, meticulously optimized for 3D…
The GT2 Timing Belt Holder/Clip is a simple and efficient solution for most 3D printer projects. It is designed to securely hold GT2 timing belts, which are commonly used in 3D printers and other CNC machines. The model comes in two…
Print approx. €0.17–€0.21 excl. taxPreliminary estimate for PETGSource material: PET
Steve5092 made a pretty good tripod, but his sleek design also needs more supports. Since I gave away my old one, and had to print a new I thought I'd make one with flat sides so it's easier to print.
Print approx. €6.18–€7.55 excl. taxPreliminary estimate for PETGSource material: PET
Info: for those who likes it REALLY long more info about print at long millipede print introduced spiral curve, so it can be much longer added also variant for Prusa MINI 200 vertebras print is in the end about 117cm long. Lengths: 200 or…
Print approx. €12.16–€14.86 excl. taxPreliminary estimate for one variant
Do you hate wasting toothpaste? I wanted something to help extract all the toothpaste from the tube and still look nice
Print approx. €1.95–€2.38 excl. taxPreliminary estimate for one variant
Important Update 2025/2026 Das Filament changed from 800 g to 1 kg. The old Masterspool is no longer compatibel with the 1kg spools. The NEW Das Filament1 kg Masterspool:…
I have made a garage for small cars! Especially made for Hot Wheels -sized cars, the garage is available in two sizes. The small one for most of the cars, and the tall one for taller cars! It can be stacked upwards, so it can be displayed…
Print approx. €1.44–€1.76 excl. taxPreliminary estimate for one variant
➡️ Check out also mega long millipede Info: for those who likes it long in original from @Loubie3D (thanks for the model!) is only 1 length of the centipede/millipede/catterprillar (the other is just a scaled variation, with the same 17…
Print approx. €1.55–€1.90 excl. taxPreliminary estimate for one variant
06/01/24: I have released my UNIMOG RC Chassis (model U5023 - 2014) at 1/10 scale . Remixed for my Unimog RC design (in progress). See my Diff #4 for mounting instructions. You need 8 MR63ZZ ball bearings per differential (for Unimog 16…
Table vise - 100% printable - no support - optimized orientation Rock solid: this optimized 3D-printed vise effortlessly withstands a 1 kg load thanks to its high-strength design. Create your own using the included STEP files. Dimensions:…
Print approx. €0.05–€0.06 excl. taxPreliminary estimate for PETGSource material: PET
Customizable Parameters: Tooth Profile (GT2, HTD 3M, HTD 5M) Tooth Count Tooth Width (Belt Width) Bore Size Snap-Ring Size Grub Screw Size What you need to know: Printed in two parts. A metric snap ring/retaining ring (DIN 471) is…
I used PLA material with a granite motif for printing. I adjusted horse back where the mane ends. I also added a tail from another project. He removed the horse fur and added his own version. The original model had a lot of problems with…
Print approx. €14.47–€17.68 excl. taxPreliminary estimate for one variant
Introduction This accessory will be used in one of my projects currently being developed for the PRUSA Mk4. What is this for? This serves to limit the tightening force on the nozzle when it's being changed. However, please so use it with…
Print approx. €0.60–€0.73 excl. taxPreliminary estimate for PETGSource material: PET
Based on the idea I found in a German forum, I have created an optimized version of the Qi charging tray for the CUPRA Born. If you are receiving messages that your smartphone cannot be charged by the charging cradle of your Born, this…
Print approx. €0.57–€0.69 excl. taxPreliminary estimate for PETGSource material: PET
A replacement scroll wheel for the Corsair Scimitar pro. If scrolling does not work on your corsair scimitar pro and the wheel moves without resistance, this might be due to a broken pin on your scroll wheel. This replacement part can…
Print approx. €0.38–€0.46 excl. taxPreliminary estimate for one variant
A headphone stand for desks etc optimized for 3D printing. Inspired by SaSSY Design's “Headphone stand and holder - simple modern design” but redesigned from the ground up to increase print speed, remove bulk, and reduce tipping over from…
Print approx. €4.11–€5.02 excl. taxPreliminary estimate for one variant
Topology optimized shelf bracket for a small shelf with a depht of 10 to 15 cm. You can mount it to the wall with 4-6mm screws and secure the board with a short screw through the top. The model can be printed perfectly without supports.
Print approx. €2.47–€3.02 excl. taxPreliminary estimate for one variant
Welcome to GlennovitS3D. Join the Club on Printables.com to support creation of new models , get access to exclusive models , and get commercial rights, to sell prints. Join today - GlennovitS3D - or check out my model collection or my…
Print approx. €1.13–€1.38 excl. taxPreliminary estimate for one variant
Combine this with any credit card-sized wallets to store Euro coins. This can store two items of each Euro coin in a wallet that can hold credit cards, like https://www.printables.com/model/766390 or…
Print approx. €0.75–€0.91 excl. taxPreliminary estimate for PETGSource material: PET
This model contains the three initiative tokens needed to play Star Wars Unlimited. The first player token is the only token needed for 1 vs 1. The multiplayer “ Twin Suns ” game mode needs the “Plan Counter” and “Blast Counter”. These…
Print approx. €0.60–€0.74 excl. taxPreliminary estimate for one variant
English The idea was to create a tunnel portal similar to the detailed Noch Profi Tunnel. It is designed and scaled to nicely fit two tracks in H0 scale. I recommend to print it horizontally (obviously) and use only one or two bottom…
Print approx. €5.48–€6.70 excl. taxPreliminary estimate for one variant
If you've looked for a painter's pyramid before, you're probably aware of the variety of designs out there. I faced the same situation and, while many models had great features, none quite ticked all the boxes for me. That led me to…
Print approx. €3.40–€4.16 excl. taxPreliminary estimate for one variant
GT2 pulley by 20 compared to a T2.5 or MXL pulley, the tooth profile of the GT2 pulley eliminates backlash. The rounded teeth of this wheel and belt are more closely connected, which ensures a smoother transition between the teeth... ;-)
Print approx. €0.34–€0.41 excl. taxPreliminary estimate for one variant
This optimized Prusa Mini MINDA-holder manages the heater cables more loosely in the space between the minda holder part and cooling fan. Even without the second screw in place, the part doesn't bend outwards like the original minda…
Print approx. €0.61–€0.75 excl. taxPreliminary estimate for PETGSource material: PET
A simple joiner that allows you to connect two ends of a length of 6mm wide GT2 timing belt. The joiner is shaped so it does not interfere with the teeth of the belt. Print with largest surface down. Slip the ends of the timing belt into…
Fitness accessory engineered using FEM analysis and topological optimization techniques. This design combines structural integrity with lightweight construction, resulting in a sleek and organic form that maximizes performance and…
Print approx. €9.65–€11.79 excl. taxPreliminary estimate for one variant
A unique gyro-style fidget spinner designed to rotate freely in all axes . Thanks to the internal guide rails, the inner elements can move and spin in seemingly unlimited directions, creating a smooth, continuous, and highly satisfying…
These baseplates provide a fixed place for your insertboxes: in your workspace, cupboard, drawer and all sorts of cases. The interlinkable systems allows bigger sizes than any printbed. Besides the injection-molded industrial/trade type…
Print approx. €0.25–€0.31 excl. taxPreliminary estimate for PETGSource material: PET
Border fixed manually, point by point. Total surface 10500 Km2 → 99% accurate. Z exaggerated x3.
Print approx. €1.21–€1.48 excl. taxPreliminary estimate for one variant
Print it laying flat on the built plate and use supports (Like shown on the image with the built plate). Use PETG as PLA has grip problems while opening!
Print approx. €0.53–€0.65 excl. taxPreliminary estimate for PETGSource material: PET
Support with and without hooks for the Wowstick S1 electric screwdriver. This is a remix of the user obuslive. https://www.thingiverse.com/obuslive/designs -The size and use of filament for printing has been reduced. -It has been added…
Print approx. €7.30–€8.93 excl. taxPreliminary estimate for one variant
Fast‑Print 3D‑Printed Desiccant Box with Infill Ventilation Grid This 3D‑printed desiccant box is designed to efficiently hold moisture‑absorbing material while printing fast and using minimal filament . Instead of traditional perforated…
Print approx. €0.19–€0.23 excl. taxPreliminary estimate for one variant
Topology Optimized Corner Brackets. Used for a Printer Enclosure with 20x20mm Aluminium Strut Profiles.
Print approx. €3.81–€4.65 excl. taxPreliminary estimate for one variant
I designed this box to enclose ESP module and relay board I use to control my pool. It includes holes for cables (Pump, robot and temperature sensors) and mini USB connector for ESP power supply Box includes as well nuts to close and…
Print approx. €1.80–€2.20 excl. taxPreliminary estimate for one variant
Scimitar of the Seven : Legend of Zelda : Tears of the Kingdom.
Print approx. €22.00–€26.89 excl. taxPreliminary estimate for one variant
Hello, Welcome to my profile, full of models and miniatures :-) I have for you Imitation of .22 Long rifle cartridges. For small-bore rifles, small-bore weapons and others. The cartridge is suitable for exhibition, decoration, or perhaps…
Print approx. €0.24–€0.29 excl. taxPreliminary estimate for one variant
Modelo original, Consta de una base fija en la pared con una bisagra en la que se acopla una madera o impresión 3D plana y otra bisagra con el puntal articulado y completamente escamoteable. Se pueden poner los ejes pasadores impresos…
Print approx. €0.50–€0.62 excl. taxPreliminary estimate for one variant
Update 2024-11-17: After ~3 years of near daily use, it broke. I've made a few subtle updates to the model that should both strengthen the fracture point, and clean up a model a bit. I had used an older design daily for a year, before it…
Print approx. €0.27–€0.32 excl. taxPreliminary estimate for one variant
I recommend using a layer height of 0.15mm or smaller to give the print a smooth finish. This way it will nor wear off the headphones somewhat delicate padding. Using selective support recommended (see 3MF file). No further requirements.…
Print approx. €2.40–€2.93 excl. taxPreliminary estimate for one variant
About Remix of Aneng Multimeter stand, added 2x2 gridfinity base with magnets and a box on the back to keep probes in it add magnets and it will be even more stable added version with more ‘flat’ angle for better reading the screen,…
Print approx. €3.54–€4.33 excl. taxPreliminary estimate for PETGSource material: PET
I couldn't find a crayon or pencil extender for my kids' crayon scraps. The commercial ones were either too expensive or too difficult for kids to handle. So I designed one myself. Advantages : Easy and fast crayon change. Optimized for…
Print approx. €0.16–€0.20 excl. taxPreliminary estimate for one variant
Hello, Welcome to my profile, full of models and miniatures :-) I have Jimi Hendrix for you - a great world guitarist and excellent musician. Unfortunately, this print is quite complicated and I didn't succeed at all :-(... I hope you…
Print approx. €4.37–€5.34 excl. taxPreliminary estimate for one variant
I read through the comments on the original design before I was going to print it and decided to make a remix that is more sturdy and easier to print. This is an optimized version for 3D printing with added durability, print speed, and…
Print approx. €1.91–€2.33 excl. taxPreliminary estimate for one variant
Have you ever noticed how tuna fish is totally ignored during Christmas? It's like they don't even exist! But carp fish, on the other hand, are everywhere. They're on the Christmas tree, in the stockings, and even on the dinner table!…
I want to introduce you to a dinosaur brick set, see also my Building Blocks System . Model Info | Introduction I created a brick system (see here ) adapted from (analogue to) Lego and optimized the dimensions for easy printing with PLA…
Print approx. €4.07–€4.97 excl. taxPreliminary estimate for one variant
I created this model to be used when playing Star Wars Unlimited . This token is used mark units which have +1/+1 experience or have a shield (written in Aurebesh ). My goal in creating this token was to create a token which was double…
Print approx. €0.17–€0.21 excl. taxPreliminary estimate for one variant
The small cubes has sides of 15 mm and the s hinge doesn't have rounded outer contours.
Print approx. €1.69–€2.07 excl. taxPreliminary estimate for one variant
This redesigned body prints in 3 parts same as the original. It is theoretically optimized for rigidity to weight ratio so it should still be strong while also looking very cool. This will definitely need supports and should be glued…
Print approx. €4.26–€5.21 excl. taxPreliminary estimate for one variant
you can find here the detailed description. this version requires more intervention, but is fully integrated and actively exchanges the moist air with the ambient air. I remixed “ Sunlu S2 base with ventilation ” to have an seperate and…
Print approx. €0.94–€1.15 excl. taxPreliminary estimate for one variant
This variant supports the stock hex key that comes with the cutoff tool, and other minor improvements. Changes from the original: Hex key retention slot to hold stock M12 hex key that comes with the cutoff tool Arbor retention moved to…
Print approx. €0.18–€0.22 excl. taxPreliminary estimate for one variant
Hello, Welcome to my profile, full of models and miniatures :-) I have for you a Primitive Warrior, a prehistoric man for an exhibition or diorama. Very nice figures. It is suitable for coloring. My children absolutely love it :-).…
Print approx. €9.75–€11.92 excl. taxPreliminary estimate for one variant
Mimic : Borderlands : Weapons Chest Trap Gcode and 3mf come as split model so you will have to glue parts together.
Print approx. €9.10–€11.12 excl. taxPreliminary estimate for one variant
Vor- und Nachteile auf einen Blick: + verbindung oder verlängerung von GT2 6 mm Zahnriemen + schmarl/klein/minimalistisch + Druckerfreundlich (Überhänge >55°, keine Brücken, etc.) + wiederverwendung von defekten Zahnriemen Einkaufsliste:…
Print approx. €0.33–€0.40 excl. taxPreliminary estimate for one variant
Model does not need supports. The model can be printed on a regular bed. For extra resistance against deformation, consider printing the part under the tube that inserts in the hole with solid infill. (see attached project file)
Print approx. €1.98–€2.42 excl. taxPreliminary estimate for one variant
This is optimized for Prusa printer. The original did not immediately size well onto a Prusa and I was an idiot in getting it to easily size well for my MK3. I wasted 3 prints before I realized how best to maximize the sizing for both…
Print approx. €9.11–€11.14 excl. taxPreliminary estimate for PETGSource material: PET
Hello, Welcome to my profile, full of models and miniatures :-) I have for you Imitation of 5.7x28 cartridges for P90. The cartridges are made exactly according to the machine documentation, so they are fully authentic. I have 2 variants,…
Print approx. €0.50–€0.61 excl. taxPreliminary estimate for one variant
I created this set for my 3 years old niece who loves carrying a little purse like her mom. Children enjoy imitating adults, and I thought having a complete set of all the things that mom and dad always carry around, would be a lot of…
Print approx. €1.02–€1.25 excl. taxPreliminary estimate for one variant
A minimal case for the Framework Mainboard. Prints in only two pieces, unlike most, and fits on a standard MK4 print bed (or equivalent size). In the name of minimalism and size, this case has no support for the USB modules, audio board,…
Print approx. €1.97–€2.41 excl. taxPreliminary estimate for one variant
Hello, Welcome to my profile, full of models and miniatures :-) I have for you an Imitation of 7.62x51 Nato cartridge. For the Steyer AUG submachine gun. The cartridge is suitable for an exhibition, for decoration, or perhaps as a…
Print approx. €0.93–€1.14 excl. taxPreliminary estimate for one variant
Should be easy to print using petg/pla and other materials that does not warp too much, No supports needed, if you print in correct orientation. i have printed with 0.2 and 0.3 mm layer height 0.2 offer better Each file contains a…
Print approx. €6.78–€8.28 excl. taxPreliminary estimate for one variant
You need a square nut M3 and an Allen screw M3x6mm
Print approx. €0.68–€0.83 excl. taxPreliminary estimate for PETGSource material: PET
Minimalistic coin stand / display for 30x1,25mm coin.
Print approx. €0.09–€0.11 excl. taxPreliminary estimate for PETGSource material: PET
Yes - believe it or not, Stanford bunny had a brother! Few years back when Printables was not a thing I was browsing Thingiverse for yet another model of low-poly bunny, because my GF thought that Stanford felt lonely. And what I fould…
Print approx. €3.55–€4.34 excl. taxPreliminary estimate for one variant
Hello, Welcome to my profile, full of models and miniatures :-) I have here for you Imitation of .357 Magnum cartridges. I share 2 versions, one classic 1:1 and the other with a hole for the neck or on the handle. It prints really well.…
Print approx. €0.65–€0.80 excl. taxPreliminary estimate for one variant
Andy's model modified to fit the Mini+ printer specifically: 1) increased the height to 25mm 2) widened the base to 23mm In this way the two risers fit perfectly into the slot left by the hinge of the display and even if you move the Mac…
Print approx. €1.23–€1.50 excl. taxPreliminary estimate for one variant
Hello, Welcome to my profile, full of models and miniatures :-) I have for you Imitation of .45 Colt cartridges. For Colt 1911, Glock .45 cal. and others. The cartridge is suitable for exhibition, decoration, or perhaps as cosplay. The…
Print approx. €0.74–€0.91 excl. taxPreliminary estimate for one variant
Munchkin Box Insert: Optimized for Small Printers I wanted to play around with Tinkercad and I made a box insert for the game “Munchkin”. This fits the box of German “Munchkin 1+2” (I do not know whether other boxes share those dimensions…
Print approx. €3.89–€4.75 excl. taxPreliminary estimate for PETGSource material: PET
This is a variation of https://www.printables.com/model/1202146-wall-mountable-housing-for-dht-22-sensor for smaller sensors without own housing. See attached pictures for assembling. Please remember to insert the cable into the housing…
Print approx. €0.18–€0.22 excl. taxPreliminary estimate for one variant
A 75mm deep shelf bracket designed using topology optimisation to support 25kg. Created using SolidWorks topology optimisation tool for an organic, unique look. Each bracket has been designed to hold 25kg, so for more weight add more…
Print approx. €3.31–€4.05 excl. taxPreliminary estimate for PETGSource material: PET
A doorstop topology optimised for force on the top and back surfaces. Printing Should print with fairly standard settings. I recommend printing upside-down so that the sloped top surface will end up being flat rather than stepped (see the…
Print approx. €1.64–€2.01 excl. taxPreliminary estimate for one variant
Quagmire and Kimi Couples Retreat *meh. figures were designed separately and added together and they don't match as well as I hoped.
Print approx. €19.22–€23.49 excl. taxPreliminary estimate for one variant
Hello, Welcome to my profile, full of models and miniatures :-) I have here for you Imitation of 7.62x39 AK-47 cartridges. The cartridge is suitable for an exhibition, for decoration, or perhaps as a cosplay. I used Anycubic PLA Basic as…
Print approx. €0.80–€0.97 excl. taxPreliminary estimate for one variant
I used the Tutorial from CNC Kitchen. I hope you like it. If you like to, check out my other designs too!
Print approx. €5.23–€6.39 excl. taxPreliminary estimate for one variant
The nozzle connects the hose to the vacuum cleaner. According to multiple websites it is compatible with devices from Siemens, Bosch, Grimi, Krups and Pitsos. For 35 mm Ø hose (Hose outer diameter 40mm). I personally used it for the…
Print approx. €1.47–€1.79 excl. taxPreliminary estimate for one variant
Only 1mm thick, print in colours you like.
Print approx. €0.99–€1.21 excl. taxPreliminary estimate for one variant
This is a slight remix of DANCAN13's remix timing cover. I just added a engraved bevelled chevy logo and dual colours (with single extruder). Files and setting the same as the one from DANCAN13. Also trimmed the sensor holder as it does…
Print approx. €4.14–€5.06 excl. taxPreliminary estimate for one variant
READ! TEETH MODEL IS WITHOUT TOLERANCE! SET AN APPROPRIATE ELEPHANT FOOT COMPENSATION ACCORDING TO YOUR NOZZLE AND LAYER HEIGHT SO THAT YOUR TEETH FIT TO THE CHEST! I printed with 0.4 Nozzle and 0.20 layer height and set elephant foot…
Print approx. €14.17–€17.32 excl. taxPreliminary estimate for one variant
I just moved the cylindrical part under the surface of the support and created a small area for a good adhesion of the first layer. No supports needed. Use 0,1 mm layer height for best results. It works also with 0,2 mm height.
Print approx. €0.38–€0.47 excl. taxPreliminary estimate for PETGSource material: PET
I bet that all of you have already come in touch with famous Stanford bunny. Actually, for me, its low-poly version was the first print that I ever made back in a day in the university on an overpriced Makerbot machine that was just shit.…
Print approx. €3.22–€3.94 excl. taxPreliminary estimate for one variant
The active air flow via fan is installed in the wrong direction of the Sunlu 2. The fan mostly blows the air onto the back wall, and in some devices onto the front wall where the circuit board is installed. As the Sunlu is round, the air…
Print approx. €0.91–€1.12 excl. taxPreliminary estimate for one variant
Introducing the Tsunami SUP Paddle Clip Set, designed to securely hold paddle pieces together for enhanced stability during your paddleboarding adventures. Optimized for Tsunami SUP paddles, this set features a parameterized design for…
Print approx. €3.39–€4.14 excl. taxPreliminary estimate for PETGSource material: PET
Since my ears are in a pretty standard position I don't need the earcup hinge to be able to fold 360 degrees. I like my earcup to be pointed inwards because that's where my ears are. This snap on addition limits the range of the earcup…
This is a hexagon shaped dice tray, 29mm high (1.16") and 150mm wide (5.94") with a raised edge and thick wall for rolling your dice inside. Inside the tray, there is text and an image that says "Definitely Not A Mimic" and that's about…
Print approx. €6.02–€7.36 excl. taxPreliminary estimate for one variant
Hello, Welcome to my profile, full of models and miniatures :-) I have for you an Imitation of the 20 x 138 B Solothurn cartridge. For Flak Cannon caliber 20mm. The cartridge is suitable for exhibition, decoration, or perhaps as cosplay.…
Print approx. €4.89–€5.97 excl. taxPreliminary estimate for one variant
I created these tokens to be used to mark damage on cards in the card game Star Wars Unlimited. The tokens are designed to be printed with a filament swap from red to white to red. These tokens can be used in other games where damage…
Print approx. €0.28–€0.34 excl. taxPreliminary estimate for one variant
If you own a lamp like this, you know how over time the springs on the stem get tired and no longer keep the lamp straight. This is a simple bracket designed to keep the lower arm straight, so it doesn't scratch the wall behind it. The…
Print approx. €1.57–€1.92 excl. taxPreliminary estimate for PETGSource material: PET
Y-Axis Limiter / Stopper for dual MGN12H linear rails It is being sold under: “Upgrade Ender-3 V2 - Y Axis Dual MGN12H 300MM Linear Rail Kit Linear Mod ” Similar are to be found on aliexpress and others. After the chinese sellers: 2) For…
Print approx. €0.37–€0.46 excl. taxPreliminary estimate for one variant
This model has several unique features including The threaded driver rods have a triangular cross-section which maximizing build surface contact while minimizing filament use and build time. This configuration ensures there are always 3…
Print approx. €1.18–€1.44 excl. taxPreliminary estimate for one variant
Should be printed în PETG (PLA is too britle). You can buy cheap UM2 collets pack (10 pcs - $2) here https://s.click.aliexpress.com/e/_oBiPN3h Also checkout the model with PC4-M6 Pneumatic Connector…
Print approx. €0.37–€0.45 excl. taxPreliminary estimate for PETGSource material: PET
HTD5 Timimg Pulley with 60 T for a 12mm Shaft (with 4mm Keyway) fitting on a dividing head. Printed with PETG and 100% infill.
Print approx. €4.98–€6.08 excl. taxPreliminary estimate for PETGSource material: PET
Here lies the instructions to build, assemble and program a compact, modular and fully enclosed 3D printed split flap display.
Print approx. €2.19–€2.68 excl. taxPreliminary estimate for one variant
The stock limiter that comes with the RIA VR60/VR80 9rd shotgun magazine is designed to only allow 9 shotgun shells maximum. However, if you reduce the size of that limiter you can actually squeeze a 10th shell in the magazine. So I give…
Print approx. €0.62–€0.76 excl. taxPreliminary estimate for PETGSource material: PET
Hello. This is a Glasses Holder made for the Glasses Holder Competition. Enjoy. —————————————————————— Print Information: Print in Vase Mode , all testing was done using PLA , but the Print is very simple , with it having no Overhangs and…
Print approx. €0.33–€0.40 excl. taxPreliminary estimate for one variant
![Quick, 29 Minute Print — Optimized Glasses Holder [Vase Mode]](https://media.printables.com/media/prints/362302/images/3066076_5a4789e5-e52d-4726-ab23-905b09babbe6/img_9903.png)