Counting matching models…
UPDATE: 15th September 2023 - Thank you all for the positive feedback for v3. I've now removed v2 as a result. UPDATE: 24th July 2023 - Whilst v2 was a lot better fit I understand some comments about smaller pieces going under the scoop.…
When I added a hexagonal mesh to the Voron's skirts, I also wanted that look and the added protection for the fan grills. So I designed this model to fit my needs: Provide a sturdy mesh that won't break accidentally Modular to play around…
Stealth Press 1 Important! As of November 26, 2024, this revision of Stealth Press 1 is considered a legacy version. We recommend downloading and building the Stealth Press 1S version. Stealth Press 1 revision will remain accessible for…
A small, strong case with a collection of optional inserts for different uses. Case Use a section of 1.75mm filament inside the hinge to connect the lid to the base. Depending on your printer/setup, this hole maybe be on the tight side or…
I wanted the nice mesh-style look for the skirts of my Voron 🥰 but without reprinting the complete skirts and especially without “meshing” with the slicer 😉. So I designed these plug-in mesh inserts which besides the awesome look also…
Hello all, here you can find a set of different inserts for an IKEA ALEX & MALM office cabinet . I love to organize and have been inspired by Alexandre Chappel in the creation ( Youtube ). He created the inserts for his homemade drawers,…
Do you like your Drippy Bucket but wish it had some compartments? This is it! It is held in by the “Drippy” component, prints with no supports, prints fast at .3mm layer height and gives the appearance that the interior of the Bucket is…
BEFORE STARTING THE IMPLEMENTATION OF THE PROJECT, READ CAREFULLY THE ENTIRE DESCRIPTION AND VIEW THE PHOTO GALLERY !!! This is a Remix “Filament Guide Sled and Filament Guide” for an amazing project " Filament Spool Switcher & Winder "…
Stealth Press 1S Stealth Press 1S: Latest version of precision DIY Heat Set Insert Tool Stealth Press 1S is a highly accurate, mostly 3D-printed heat set insert tool compatible with generic, TS100, and Pinecil soldering irons. New Stealth…
This is a compact heat insert press that utilizes the affordable and readily available 150mm linear rail with MGN7H block. Instead of the adopted used return with a counterweight found in many designs, a printed spring takes its place,…
When installing heat set inserts, a press tool can be a great help to ensure everything is aligned and straight in the end. And if you have a Dremel anyway, the Dremel Workstation can be a very versatile addition to your tool collection…
NOTE: This was designed for the charger that comes with the Steamdeck LCD. The charger that comes with the Steamdeck OLED is longer and may not work with this accessory! Not so much a remix but a reimagined insert for the back of the…
When the Inserts fits tight in the Honeycomb Wall, they are difficult to remove for replacing to another location. I tried with a screwdriver, but the PLA gets deformed. So I designed a removal tool. Stick the tool in the inner hex from…
This is a remix of the Z-motor mount for the Prusa CORE One 🥰. The key improvement is the addition of heat set threaded inserts in place of the original design that required the M3 bolts to thread directly into the printed plastic. Key…
This is a Heat Insert Mod of the great DIN Rail Bracket from Fabian. M3 Heat Inserts up to 5.7mm can be used. If you want to create your own mounts for it - hole distance is 52.5mm. I will also publish several mounts I created.…
About Stealth Press ZERO Stealth Press ZERO: Compact Precision Heat Set Insert Tool. Stealth Press ZERO is a miniaturized version of the original Stealth Press , offering a highly precise, mostly 3D-printed DIY heat set insert tool…
The source marked this model as adult content.
Rather than setting layer temperatures manually for a temp tower, just include one line of G-custom code in PrusaSlicer's “before layer change G-code" section to do it automatically. You can use the attached .3mf file as a starting point…
See update notes below ↓ 1-8-2026 This is to store a Milwaukee router inside the Packout Compact Organizer box by Milwaukee. The parts bin could use a lid but I don't plan on having much else inside this area other than the vacuum shroud.…
UPDATE: Added STEP file format. In this project we're building a rig for installing heat set inserts. Use 3D printed parts and hardware to build a solder rig with smooth linear roller action! Make perfectly straight inserts with precision…
This is a blank insert I made when I created My Router Case for the Milwaukee Packout Compact Organizer. I have this shared as part of the files but I figured I would make it a seperate model. 3mf, stl, and step files included.
From the original designer of Drippy Bucket and Drippy Pail comes… Drippy Drum! If you already have Drippy Bucket or Drippy Pail and wish they were less paint-y and more hazardous-waste-y, this is for you! Drippy Drum is the same basic…
3D print or lasercut pegboard and insert base. you can also use the insert baseplates as universal mount to glue or screw on already existing original tool holders like bit holders, drill sets and stuff. the insert base is designed for a…
This insert was designed to hold all available Spirit Island content with quality sleeved cards in the Base Game and Jagged Earth box. The insert is optimized for multi-person play, as trays such as energy, elements and other tokens are…
This is set of various inserts which fit into a standard Altoids tin (inner size ~90 x 55 mm). You can choose the layout to fit your needs. They can be used to store bolts and nuts, pills and other small components or for example as an…
UPDATE 24.09.2024 8x3mm Magnet Variant added (not tested by me as i dont have those magnets. These magnets may be too strong for this variant) UPDATE 20.09.2024 6x3mm Magnet Variant added INTRODUCTION v2 of my Magnet Insertion Tool, with…
remote holder update · added STLs with different sized inserts for fit and color photos show printed in matte black pla and matte beige pla 0.20mm layer height 15% adaptive cubic no brims or supports note > this model comes in two plates,…
A cool checklist / to do list in which you can insert paper and close the cover to secure! The model is print in place and comes off the bed with moving sliders and hinges. Comes in three variants, normal, one for hanging e.g. on a wall…
I liked the remix from ANBAL534 ( https://www.printables.com/model/207028-steam-deck-carrying-case-insert-for-eu-plugs-europ) but missed the option to use the case as a stand as well. Besides that I don't use full SD cards, I opted in…
Trying to stay organized as you explore and conquer Catan? Unsatisfied with the wasted space on the factory inserts and having to store everything in multiple boxes? Try these inserts designed to make setup, play, and storage a little…
A Flashforge AD5X tool insert to fit into the Flashforge Adventurer 5M Toolkit .
Print your own case for the CNC Kitchen Threaded Inserts Soldering Tips (M900 Style)! UPDATE: All NEW cases available here: https://www.printables.com/@CNCKitchen/collections/2867288 Update 2023-08-13 Added case for V2 tip with easy-grip…
This model gets a few downloads, I would love to see your end product, please post it as a make, it may motivate me to make upgrades or mods. Thanks! Overview The idea behind this case is to be simple to print in terms of setup, required…
Here's an insert for my Print In Place Mario Coin Block that holds 16 Nintendo Switch game cartridges. Are you interested in selling your prints of my designs? Join my Printables Club , and start making 💰 with your idle printers!
Put simply - So easy to remove they fall out. UNTIL you put something into them, then so tight they might even hold tighter than the original design. How? Magic of course. The inserts for attaching to the wall also have the same cuts to…
I added a new Resource Box design with enhanced edges to get the cubes out easily. Also the box is now split in half to have two trays with resource cubes if you play on a big table. Additionaly the box is held together by two 10x2…
For bambulab users: you can find the model including print profiles here on makerworld . I wanted a drill press for my Dremel, as well as a dedicated press for installing heat-set inserts with my soldering iron. Since there are already…
This Insert stores Frosthavens content in the original box without box lift and it is extremely optimized for fast setup. It is designed for the box with these dimensions: 16.14 x 11.81 x 9.84 inches or 41.0 x 30.0 x 25.0 cm The standard…
This Fitting Insert is inserted into the threaded end of the “Y” Adapter PC4-M10 PTFE Connector to reduce the chances of the filament getting stuck as the filament exits the “Y” Adapter and goes to the printer. I printed @EdJohnson's…
I designed and tested the insert with the German Sky Team version. It seems to be identical in size with the other available versions. Insert dimensions: 247mm * 177mm * 19mm I created different versions for larger and smaller printbeds.…
Needed a small tackle box to organize fishing gear. I really didn't need my full tackle equipment for every fishing trip. Made these two tray inserts with nesting hinges that fit perfectly in standard Altoids tin. Used 8 M2x6 screws for…
Get the CAD and STL models of our inserts, to use them in your designs! Purchase original CNC Kitchen Inserts in our store CNCKitchen.STORE , at Prusa, or at a ton of resellers ! Get suitable soldering iron tips at CNCKitchen.STORE , at…
The case is based on my parameterizable " Rugged Box ". Inner dimensions: 130 x 185 x 65 mm (Bottom height: 50 mm) Support my work For non-Prusa parts and filaments, check out 3DJake ( International , UK , Germany , France ). I'll get a…
its just a rough approximation of the inside of the Milwaukee Packout compact organiser case for you guys to edit for specific things you wish to put in it. I think i have seen something online but this is modeled by me and is far from…
I wanted a zero clearance insert for my DeWalt DWE7485 jobsite saw and printed another I found online but it didn't fit my saw very well so I set out and whipped this one up. The insert fit well enough and was fairly straight forward to…
About Not a Key-Bak® (alternative) mount for Stealth Press 1 / 1S Made to be a less expensive retractable device alternative for Stealth Press , this is, definitely, not a Key-Bak®, but it sure works like one. Stealth Press is a highly…
This handy little piece turns a regular M3 nut into a T-nut that fits into a 2020 / 2040 extrusion ( e.g. Ender 3 frame ) in order to attach anything. Some pictures show an original Ender 3 M4 T-nut for comparison. Prints best with no…
From the original designer of Drippy Bucket comes… Drippy Pail! If you already have Drippy Bucket and wish it was less round-y and more square-y, this is for you! Drippy Pail is the perfect companion to Drippy Bucket and is ready to help…
The organizer includes the following components: 4 player boards (identical models except for using different letters: D, U, N, E) These can be printed in different colors, using a color swap to make the iconography more visible. Inspired…
An insert/organizer for the Oink Games version of Scout. Has a slot for all scout tokens, individual slots for each scoring token besides 1, a tray to hold all 1-scoring tokens, and an inset for the first player token. Since I've had…
The inserters from Factorio are ready to be printed. Inserters share the same scale as all other official Factorio models. You can find here all shapes of inserters in opened and closed variants. Inserters can stand alone or could be…
Plugs for original wall-attaching inserts can be rotated while pushed into the inserts. And I didn't like it at all :) So I designed a version that will always be in the correct position. Designed for ~4 mm diameter countersunk screw.…
Rescale this model as needed, I made the walls a little bit thicker than needed in the default scale, so unless you scale it to be very small, it should still get at least 1-2 perimeters. Check the preview after scaling! If you change the…
I made this remix of the design made by HD_Creator ( https://www.prusaprinters.org/prints/42971-t-nut-for-pursa-mini-extrusions-groove-8-type-b-m4/comments ) because it feels safer to screw against a metal nut instead of the plastic. Also…
Also uploaded my 2 x 1 size inserts: https://www.printables.com/model/672541-gridfinity-1-x-2-size-inserts-can-be-closed-indivi [Update 2024.01.01] Added new parts upon request: 1 x 1 x 4, 1 x 1 x 6 and 1 x 1 x 8 Gridfinity inserts with…
Everyone who is traveling with a Caravan knows it. The grassel and bollards in the fridge because the bottles bump into each other all the time while driving. With the help of this spacer, you can easily determine the size of your…
"As a 3d printing nerd, one doesn't buy plastic things one can design and make" The only plastic I buy now comes on spools. So I hit up Fusion 360 and made this little guy. THE NEED++++ Was getting hangups on my magazine changes on the…
A modified version of the 35mm DIN Rail bracket by Fabian. Uses heat inserts (M3 x D4.6 x L4.0). Hole spacing is 51mm. Step file included. A springless version is available here .
Remix of turbett1's Ender_3_S1_Pro tray insert. Have added: A long slot for printer nozzle needles Extended the front left slot to fit the USD card reader (the back section is still long enough for tools) Added fillets to all sections so…
Modular Corner Jig with option of changing corner Radius Inserts. How it works? Very simple! Just choose insert with needed Radius, put it together with Main Jig Body and secure the insert with a Lock screw. Main Body has a threaded hole…
The rugged box and inserts are based on my parametric “ Rugged Box ”. The size of the inserts (and box) can be modified in Fusion 360 (f3d file available in the files section). You can increase the “InsertDummies” parameter to add…
I really liked nobodyinperson 's idea.. I didn't like that the notches were visible and decided to make my own remix. CONCEPT The concept is as follows (for those who are seeing this for the first time): The insert is slotted in 6 places…
This is an insert / organizer for Star Wars Outer Rim with the Unfinished Business expansion. It supports premium sleeves on the cards (Paladin Gawain sleeves shown in the images), supports vertical storage, has no lid lift, and was…
Updated: Added Name Tags (v2) that include Silver Surfer for those that have that expansion. This insert allows you to condense a Marvel Zombies All-In pledge (minus Galactus) into just three boxes (core box, stretch goals box and x-men…
I liked this command strip mount for the honeycomb wall , but I prefer that the command strips be mounted to the side of the wall (vertical) rather than the top (horizontal). Also, I use 4 wall segments in a grid, and needed a double…
UPDATELOG: 02.09.2024: 6x3mm Magnets are now supported. 6x2 Picker 24.08.2024: 8x2mm Magnets are now supported. Tip got simplified to a blank bottom surface so it can be used for all magnet sizes 8x2 Picker 20.08.2024: 6x2mm Magnets are…
A new organizer with little waste of material that actual fits everything. I really like the ideas behind some organizers that I saw at Thingy, but they use very thick walls and big filling blocks that add time and material in excess. So…
A tool to easily insert cables into split wire loom tubing. I created this tool for a friend in sizes 8.5mm, 10mm and 13mm. If you need another size you can just take the 10mm version and scale it. Please leave a like if you enjoy my…
Edit 12/18: I added a split version of the alternate player cards tray to accommodate smaller beds. I included a small connector area for basic stability, as the tray typically stays in the box. Ark Nova has been sitting on my shelf for…
Updated 05/18/2022 Added new 79x1 (in three fits) to support season 2 minatures Added new labels for Season 2 Updated Instructions for Season 2 Updated 03/28/2022 Added new medium fit files (see “Optimizing Fit” section below) Updated…
I took inspiration from another design that has two parts. However, it didn't align perfectly with my printer. Although it might seem similar, I created this design from the ground up. It's 1 mm shorter in height, 1 mm broader, and has a…
03-01-2023 small update Added some pictured to display that Watch holders are optional and some of the assembly. ----------------------------------------------------------------------------------------------------- Drawing inspiration…
Update 1-6-26 With the combinations of mats and sleeves and expansion, what to print is confusing. Here's a chart to help: Update 10-22-25 I have made new files that allow for storage of the Dragon academy cards, tokens and other…
Habe einige Modelle gesehen die ähnlich sind aber nicht ganz nach meinen Vorstellungen waren z.B. wollte ich gern die Form eines Kronkorkens mit eingebaut haben so habe ich dieses Modell Entwickelt und mit freunden getestet ! Zusätzlich…
Reversible cupholder insert for slim RedBull sized cans while keeping the slot available for normal sized drinks too! Have not seen this style before so decided to make my own. Designed for a Tacoma, but will fit other cupholders with…
This is a remix of Arduino Case by 3DP . I've added a button to access the reset switch, removed excess material to make it slightly thinner, added a groove between the top case and lid to prevent any possible wobble, widen the tolerance…
16 different insets which can be used with my basic tile. Update 8th of February 2022 added two new insets as requested by an excited user of my design ;) (1 straight, 1 long corner & 1 straight, 2 long corners) Pick the ones which you…
Fits this case: https://www.milwaukeetool.com/Products/48-22-8435 https://www.homedepot.com/p/Milwaukee-PACKOUT-5-Compartments-Small-Parts-Organizer-48-22-8435/303005752 Make a custom organizer for your stuff!
Category Part Quantity Fixings M5 Nut 6 Fixings M5 Washers 10 Fixings M3 x 10 CHS 10 Fixings M3 x 20 CHS 2 Fixings M3 Washer (optional) 8 Fixings M3 Nut 10 Fixings M3 x 8 CHS 1 Fixings M5 x 30 BHS 6 Fixings M5 x 8 BHS 10 Fixings M5 T Slot…
Wyrmspan, a Wingspan game, takes the core elements of Wingspan and adapts them to a new theme for a familiar but fresh experience. This insert is primarily to assist with setup and teardown and includes a card market tray that can be…
Please heart, comment, and post makes! Seeing what you all use and how you use it makes it worth making more designs! V2 Update info at bottom: I've been wanting to print a case to hold Switch Cartridges anyway, but I decided rather than…
The great idea of the dry brush add-on for The Army Painter palette got my attention - since i was not satisfied with the provided models, i came up with my own solution. There is some headspace under the lid of the palette, which is…
Corner radius router jig with changeable inserts. Can be clamped to the work piece to use with a handheld router. The base is design to accommodate track saw clamps (slots for the clamps are 12mm wide, 7.5mm deep) Inserts are available in…
IMPORTANT NOTICE: This model was made for the previous version of Tony Youngblood's Dragon Egg. This is not (yet) compatible with the updated 2025 version; Tony has kindly re-released the older version, clearly labeled as “old”. I'm…
For better utilisation and stuff organisation of space in Ikea Alex drawer. Print instructions Print settings: First layer height 0.25 Layer height 0.25 (only joints printed wit layer height 0.15) Minimum travel after retraction 0
Print box twice. Optionally, print also lock. Once as it is and another one mirrored. Stick locks into grooves in the bottom. Small boxes will be fixed in corner positions but you can still take them out. Look at Ikea TROFAST box insert…
A practical and flexible storage system consisting of stackable boxes in three different sizes, created to bring order and clarity to everyday spaces. Each box follows the same clean geometry, allowing all sizes to stack securely and…
7x Blank box OR Fraction boxes 1x Bank 1x Box HIGH 3x Box LOW 1x Small cards
This is an insert / organizer for Earth, including the Kickstarter upgrades (wooden soil tokens, wooden leaves, wooden active player token, and calendar cards). It all fits in the base box, has no lid lift, supports premium sleeves on the…
BOM: Printed with ROSA3D High Speed PLA Signal Violet This model set includes three 3D-printable nut inserts designed for 40×40 T-slot aluminum extrusion profiles . Each insert provides a clean, reliable way to mount M3, M4, or M5 nuts…
These are literally just the original insert-hollow-for.stl [sic] duplicated, rotated and aligned by eye in PrusaSlicer exported as an STL. I needed them for connecting the pieces of my Honeycomb-Honeycomb Storage Wall variant.
3D printed holes often turn out too small, which can make installing heat-set inserts a bit tricky if the pilot end doesn't fit the hole. These blocks are designed so you can determine the right diameter to use in CAD, ensuring that your…
This is an insert / organizer for 7 Wonders (Second Edition) with the Edifice, Leaders, Cities, and Armada expansions. It features: * Separate and labeled trays for all of the cards. * Two trays for the money and debt tokens, one tray for…
A box I remixed for my multimeter. The lightning bolt was just a random .SVG I found and put in bambuslicer. Will require 6x M3x20mm screws for the hinges and latches. I super glued the insert in so it stays in place. I printed mine out…
Osteranhänger für den Osterstrauß weitere Modelle: Küken im Osterglockennest Osterhase mit Pinsel Osterhase mit Eiern Ei mit Tulpen Osterhase mit Schmetterling Osterei mit Maiglöckchen Küken und Maiglöckchen Osterhasen unterm Baum Osterei…
I've worked on two editions of remix of the excellent push block design by Trobinou (January 23, 2017). One of my remixes does not make use of threaded inserts, while the other (this one) does. (I have not yet posted the…
TL;DR: No-lid-lift, suitable for vertical storage, fits sleeved cards (see last page of pdf), fast setup, and teardown insert for the boardgame Dune Imperium including its both published expansion. Pro Tip: shuffle the required components…
This is the second set of various inserts which fit into a standard Altoids tin (inner size ~90 x 55 mm). You can choose the layout to fit your needs. They can be used to store bolts and nuts, pills and other small components or for…
I redesigned the scraper so that a Voron-sized M3 heat-set insert fits correctly. The hole diameter is 4.7 mm in the CAD model. The new design is extremely rigid, and the blade can be replaced as often as needed without degrading the…
A modified version of Fabian's DIN Rail Bracket to push some M3 threaded inserts into the holes. The holes are now 4mm wide and I added some material around one hole, so the inserts won't stick out.
