384 models
Ready for summer! Easy-to-print Frisbee Disc. The Frisbee flies very stably and well through the air. The holes in the Prusament disc make it ideal for short-distance use. The compact build makes it very travel-friendly. The size and good…
Print approx. €0.61–€0.74 excl. taxPreliminary estimate for PETGSource material: PET
Simple Frisbee, maximum size printable on a MK2.5S/MK3
Frisbee disc with diameter 17.5cm. No supports are needed by printing the disc upside down.
Print approx. €3.66–€4.47 excl. taxPreliminary estimate for one variant
Hackers Lisbeth Salander and Elliot Alderson
Sport Lisboa e Benfica : Football Club : Logo : Spanish la liga. Curved so please do not attempt to color with change filament at z height.
Print approx. €1.76–€2.16 excl. taxPreliminary estimate for one variant
Intro This is a fun micro frisbee designed to be super compact and lightweight, yet it flies surprisingly well for its size . At only 18 cm in diameter, it’s perfect for printing on any 3D printer — even smaller ones like a Prusa Mini or…
Om dat ik plastiekzakken gebruik in de Ikea vluilnis emmers doe ik er een klem rond zo dat de zak beter blijft zitten. Comme j'utilise des sacs en plastique dans les poubelles Ikea, j'y ai mis une pince pour que le sac reste mieux en…
Print approx. €1.05–€1.28 excl. taxPreliminary estimate for one variant
There are plenty of displays out there, but almost all of them are designed to showcase objects that have a relatively flat bottom, such as a phone or a tablet and hence will stay put even when it gets slightly perturbed. However, these…
Print approx. €5.53–€6.76 excl. taxPreliminary estimate for one variant
I purchased a Meshtastic starter kit for a RAK19007 WisBlock (and RAK4631) with a 12x40x65mm battery, only to not be able to find a case that fit that battery. This is my solution. This case features thin spots over the LEDs so you can…
Print approx. €0.14–€0.17 excl. taxPreliminary estimate for one variant
This is a frisbee made in OnShape CAD in about 10-15 minutes.
Print approx. €2.72–€3.32 excl. taxPreliminary estimate for one variant
I bought the IKEA visbäck poster holder but found it was not attached sturdy enough to the wall as is it fell down when my kid pointed to something on the poster. The hole on the backside is quite big which is hard for a nail or screw to…
Print approx. €0.11–€0.13 excl. taxPreliminary estimate for one variant
Modelled scaled 1:1 with original, material may be any type, colour typically olive-green lower conical section, dull orange top screw-on section. Prototype in black PETG, overpainted with acrylics. Printed at 0.22mm, 68g material.
Intro This is an improved version (V2) of a super fun mini frisbee. Despite its compact size and low weight, it flies smoothly and stably , making it perfect for outdoor play anywhere — park, beach, garden, or on the go. Its lightweight…
AquaFlyer: The Ultimate Floating Mini Frisbee Thank you to PCBWay for reaching out and sponsoring this project:
These are printed in flexible TPU and are designed to be as safe and as harmless as possible while still being effective. Drop them from 200 feet or higher to allow them to reach terminal velocity and produce sound. The body has a hollow…
This is a remix of this model: https://www.printables.com/model/1222316-airless-volleyball/files
This project started with a simple idea: make a pocket-sized flying disc that anyone can print instead of buying a new ZipChip every time one gets lost. Version 1 of this project was a very simple test — basically a cylinder with a finger…
NOW UPDATED WITH SIMPLER UNIVERSAL POWER SWITCH DESIGN INTRODUCED IN BENDER2 Bender's bigger, badder brother is here! Meet Flexo, the most flexible Meshtastic powered node "case kit" available… and its FREE to print! Check out the intro…
Here is an Ultimate Frisbee I created based off the regulation dimensions provided by the U.S. Ultimate Frisbee Organization. The current model is 100% to scale but obviously can be shrank to fit your print bed! This is the 3rd rendition…
UPDATE: Please see the revised version that prints without supports and has better flight characteristics: https://www.printables.com/model/1305486-best-3d-printed-frisbee-v2…
This RAK19007 WisBlock case is designed to be super rugged and printed in ABS to withstand higher temperatures. Recommendations: Use 4 walls and 15% infill for all Top and Bottom Plates - Use supports Insert - Use supports Shell - Use…
I tried printing a classic frisbee, but I found out, that the standard edges won't be strong and flexible enough (the layer adhesion is too weak when flexed), so I've adjusted them, so that the frisbee is as flexible as possible without…
Subscribe Now! A very good model by schlossbauer Time-lapse print video : https://youtu.be/SE8nYbCxkXM Remix to support free and printed. Subscribe to find out more support free 4K Time-lapse video: Subscribe Now!…
🇵🇹 Bem-vindo a Portugal! Welcome to Portugal! This model was designed by Brian Mauricio Sánchez. The Torre de Belém is a fortified tower located in Lisbon , capital of Portugal. It is a UNESCO World Heritage Site because of the…
Intro This compact mini frisbee is small enough to fit in your backpack or pocket — but don’t let its size fool you! It delivers surprisingly stable flight and lightweight performance, making it a fun outdoor toy for parks, beaches,…
After making some other “airless” models, a commenter on one of my Tik Toks said he wanted to see an airless disc golf disc….it was so absurd that it needed to exist. After some time, this is what I came up with. It isn't perfect but I…
I added a V4 that has small mounting pads to stick the GPS and Bluetooth antennae in case there are no enclosure walls within reach, or if you just wanted to keep it self contained and compact. meshtastic.org Case and setup inspired by:…
This Ultimate Frisbee Disc Clip works with Discraft and EuroDisc Frisbees. I used a 0.4mm Nozzle and 20% infill. No support needed.
RAK19007 WisBlock Base Board mount with 4mm mounting holes that fits an electronics base board with a 5mm grid spacing.
Frisbee diseñado por mí mismo en SketchUp. Tiene caladuras en la parte superior. Medidas: 1cm x 20cm
Eisbär, Hexa Sculpture
This is a Set of Frisbee Golf Disc's Deigned by Gul. We have a Putter & Crazy Putter We have a Mid-Range We have a Fairway We have a Distance
Das Frisbee ist sehr leicht und hat tolle Flugeigenschaften. Ich habe es so konstruiert, dass es auch von kleineren Kindern leicht geworfen werden kann. Beim Wurf muss die die Seite mit dem Rand (der Erhöhung) nach unten schaue. Somit…
Printed without top an bottom layers and vase mode (I recommend using a 0.8 mm nozzle)
based on the flexi-rex with stronger links, i modelled the jaws based on an official disclip. any infill + wall count is fine, i did mine at 2 walls and lightning infill.
RWE (Rugged WisBlock Enclosure) is a remix of the open-source ruggedized T-Beam enclosure, now for the RAK19007 WisBlock base board with RAK4631 (LoRa) and RAK12500/1910 (GNSS/GPS) modules. This induces a couple important build and…
Wahoo KICKR CORE 1 Tennisball Rocker Feet to have a more dynamic and comfortable setup when riding. in addition you'll need two tennisballs per feet, so 8 in total. fits easily on 225 x 225 printbeds prints without supports make sure to…
This case is designed to elevate your low power radio device 30~40 in the air on top of a standard telescoping ‘painter’s pole' available at many hardware stores and keep it protected from the elements. An upgrade from the case I designed…
Introducing Halo! Halo is the ring-shaped Frisbee of the future! Stop wasting filament on full-sized frisbees and print Halo! Features: -90% less filament than a full-sized frisbee! -Sleek, futuristic design! Print Settings Printer Brand:…
Model of a frisbee (also called disc) for discgolf. This is a putter, which is easy to throw but does not go very far for beginners :)
100% Infill 0,10 Layer Make it in Geetech Glow in the Dark Green
When building my Voron 0.2 with a Rapido, I came across the oft-referenced Rapido mount by Maverick (https://mods.vorondesign.com/detail/dWZjGJ83RbTpRTdYYRwng), but I was not satisfied with it because: it requires printing a whole new…
Crafted with cutting-edge 3D technology, this innovative Frisbee ditches the traditional design for a sleek, futuristic look. Say goodbye to worries about punctures or deflation, as this Frisbee is engineered without air, ensuring…
Versatility in mounting. Disc golf wall hanger with multiple mounting options. Blended & modified @Steve_133368 & @hineswoodworks (thingiverse) two great designs. Any Material is fine. Can be used with Nail,Screw, or Command Strip.
If you have Umbilical Mod, you probably saw you are not able to mount an input shaper where it's supposed to be attached. Worry not ! This mod will help you doing your input shaping on the Voron V0 ! There are 2 files here : a miniSB…
This is a frisbee, the diameter is approximately 210mm. It is maybe also a toy for you dog. You throw it, and he should catch it, or the other way around :). If you like it, give me a like please.
Frisbee thrower which do not requires assembly and supports. Step file is provided. Print Settings Printer Brand: Prusa Printer: I3 MK3S Rafts: No Supports: No Resolution: 200 Infill: 20 Category: Mechanical Toys
This is an improved version of: https://www.printables.com/model/430552-worlds-best-3d-printed-frisbee This frisbee easily flies 100+ feet on a good throw. Prints well and plenty durable with PLA+, PETG or ABS. Never be without an outdoor…
A frisbee flinger is a handheld device designed to launch frisbees with high accuracy and speed. Take your frisbee skill indoors. Instead of hitting trees outside, break valuable stuff inside with the redesigned, recalibrated, recharged…
if you use these on a Frisbee, use as many as you like,on top side, spaced evenly to keep frisbee balanced, furthest out as you can, round end facing direction of spin and slightly angled toward direction of flight, experiment until you…
Version 2.0 Out Now! Flies double the distance! This is a mini frisbee modeled off of the Zip Chip toy: https://www.zipchipsports.com this is my first version hopefully I will be able to follow it with an even better model! When thrown…
No changes at all! Just created a working .stl
** You can purchase this already printed/assembled from my store by clicking HERE ** Build a complete Mestastic Node with a RAK starter kit and Altoid tin case. Made cutout for OEM Lora antenna that comes with the kit, or left space to…
An improved Qidi Q1 Pro duct that has better nozzle visibility and (with my testing) better airflow due to its split airflow design! You must print this out of ABS, ASA or PA6/12-CF for the best results. PETG will most likely have issues…
Just another Eisberg Napkin holder, but made this with thinner walls (strong enough)... Print settings: 4 walls 4 top/bottom layer 15% infill Happy Printing…
Inspired by existing clips I made a new design featuring the shrimp from the Go Throw logo. Go Throw is a tournament held in early 2022 organised by the Gothenburg Ultimate Frisbee team La Bamba. I printed mine using normal PLA in the La…
created this Box for a Garage door opener using an ESP D1 Mini Controller and a Relayboard. Stepfile is included to make your own Version. Layer Height: 0,2mm Infill: 30% Material: PLA M3 Heat inserts used for mounting the Boards and the…
Note: Here is an updated version ! On my Wahoo Kickr Core, mounted on Tennisballs, I always felt that my hands have a lot more stress, as on the street. After a bit of thinking it was clear to me that I raised the backend by about 50% of…
On my Wahoo Kickr Core, mounted on Tennisballs, I always felt that my hands have a lot more stress, as on the street. After a bit of thinking it was clear to me that I raised the backend by about 50% of the height of a Tennisball, but not…
This is a water resistant enclosure for RAK19007 Wisblock. Its powered by a user removable 18650 battery. This case aims on modularity, the core module where the radio is mounted, is removable and can be mounted on different appliances.…
Public domain model of a frisbee by twin97 . Originally uploaded to Blend Swap .
Atlas Baseball Stand - A Legendary Display for Your Prized Baseball Imagine the mighty Atlas, the titan from Greek mythology who carried the weight of the world on his shoulders, now holding onto your cherished baseball instead. This…
IMPORTANT: The panels are difficult to source so I don't recommend using this model anymore unless you can find the exact panel. I have a new version in the works with a more reliable supplier. My goal was to create a durable solar…
** You can purchase this already printed/assembled from my store by clicking HERE ** UPDATE: New STL uploaded with threaded posts for the new PCM model from voltaic enclosures UPDATE2: New STL uploaded with GPS location moved to point…
I found this transparent ring from a lamp and it flew quite well when I chucked it. I desgined a replica for y'all to pint yourselves. Print in material with decent toughness but I printed in PLA and it worked fine with me. Be careful and…
This is a great flying, Frisbee-style disc made using an upcycled NEW Prusament spool component. Design goals included: Strong flight performance Comfortable handling — no sharp edges, burrs, or protrusions Clean, appealing appearance…
Do not place any supports inside of the ball or else you won’t get them out. I added them manually
I have had heard about something like this already and have seen a buyable version on Amazon Germany for about 80 € without Tennisballs, that was way to expensive for buying 3d printed parts for me, therefor I quickly designed this part…
Have you ever tried to play throwing a regular coaster? They are not easy to control and tend to flip, losing their trajectory. Try with these mini frisbee-shaped coasters instead! Dimensions: Diameter 83mm; Thickness 11mm (⅓ of a U12…
Nutzen: Um alte Tennisbälle weiter zu verwenden, werden sie oft aufgeschnitten. Mit diesem 3D Druck können Tennisbälle einfach und sicher halbiert werden. Purpose: In order to reuse old tennis balls, they are sometimes cut open. With this…
Frizerator H4A1 Frisbee Launcher Pistol Remix of Dave Delay's Fizerator H-4, https://www.thingiverse.com/thing:693465 New feature of the remix: Powered by easily available rubber bands (30 mm ... use 2 or 3 to achieve desired power).…
So you've got an LGX lite and wanna show it, or other cowlings are not your style? Try this one! I remixed the official version for the bowden version of the v0.2, making it suitable to be used with the LGX lite. This model also works for…
V6 Mount for Mini Stealthburner Features E3D V6 style mount in 2 parts. Available in both normal mount & fan-saver mount type. Easily holds together using screws (and heat insert nuts) Important Note: Please be informed that due to the…
This is a little organizer for the boardgame Lisboa by Vital Lacerda (also includes all deluxe components). The stock inlay is quite good, I just felt the need to organize the resources, player pieces, and city tokens a bit. Player: Print…
V2 is outWhistles are now inside and the name is on it V3 soon it will have better whistles and a more flush design
2025-04-10 Update - Version 1.2 In response to several folks whose games have much thicker tokens than my game has, I have redesigned some parts of this insert to better accommodate these "thick tokens," as well as made some minor…
This is still a work in progress, planning to make versions with dedicated mounting options and higher water resistance. This is an enclosure/case for the rak wisblock 19007 module, a 16340 button top battery, and n-female fitting.…
I had a friend who had some special frisbee golf discs they wanted to hand on their wall. I designed this for them. This is my first ever design after having my printer for about 2 months. The top back area will need some support but…
This is a Mini SB mound for KP3S. The nozzle was centered. Various extruders can be used. M3
"Your tasbih, always within reach." 33-piece Tasbih (Prayer Beads) that easily transforms into a stylish wearable bracelet. Updates: V2: Enhanced Flexibility V3: Tightened snap-fit mechanism V4 (Major Update): Replaced snap-fit joint with…
Simple Dog Disc V2 made from TPU.
Tisk z PETG Pro větší pevnost tisknout s max infill.
Schloss Johannisburg der Stadt Aschaffenburg Print instructions Printed in Prusament PLA with Supports
V2 Published - https://www.printables.com/model/964355-overengineered-frisbee-v2 I tried printing a classic frisbee, but I found out, that the standard edges won't be strong and flexible enough, so I've adjusted them, so that the frisbee…
Halterungen zum Anschrauben der Märklin Gleisbox man benötigt zwei der Halterungen diese wird dann mit jeweils 2 Senkschrauben Durchmesser 3 befestigt Brackets for screwing on the Märklin track box you need two of the brackets this is…
Fysetc Portable Input Shaper has specific locations for mounting holes, this mod allows you to attach it to your Voron V0.2. It needs 2 M3x6 screws so it can be secured to your carriage.
Lamellar plate for armor, which is viking styled. Remnants of original armour is found near Visby.
This compact, 3D-designed disc is built for accuracy and strength, guaranteeing smooth, steady flights every time. Whether you're at the park, beach, or just chilling in your backyard, the Mini Flyer is portable and suitable for all ages.…
This is the Cowling for the Mini Stealthburner on a Voron 0.1 or 0.2 with an added slot for the PINDA sensor. So you can enable probing on the Voron0 >> You will not loose any print area, as the pinda sensor is now located on the back…
Inspired by Brisbane Tiny Doors series designed and created by local artist Mace Aragorn , I recreated a 3D and mini version of his first public tiny door (first version) using few old photos as reference. Dimensions: 122.8 mm height 68…
Eisbären mit Kerzenlicht 2
This is the mini-stealth burner tool head, modified to use the Orbiter v2.0 extruder. Print it like any other Voron parts, 4 walls, 40-50% infill in ABS/ASA. Other than the extruder, this should be compatible with all the stock mini…
