Counting matching models…
This is the full kit to raise the Creality K1C lid to minimise/ eliminate the issue of cable chain bumping onto the lid when printing at the left edge (when viewing the Creality K1C from the front). It also eliminates the issue of…
Update 8/9/25- Based on some feedback the starting gcode was not mimicking the original profile from the K1 Max. I changed it and uploaded v8. PLEASE PLEASE PLEASE leave feedback! I want to make sure this is working and not useless to…
Liked? Like for the sake of decency, do you think it’s easy to create modifications? Modification for belt tensioner Creality K1, K1C, K1 MAX Gives greater stability to the tensioner; with its help, possible distortions are eliminated.…
The names of all files include the number of parts needed !!!ATTENTION!!! LOW version fits all k1se, HIGH-only for printers with 4 m3 holes in the top of the frame. I cut out the panels from 3mm acrylic and printed other parts from PETG,…
This handguard for the BK1S/2S replicates the look of the LVOA AR handguard in a 9.5" length. It is compatible with the handguard nut that comes with the blaster, as well as the original screw and nut. All MLOK slots are functional. The…
h/t to @SeeMaxx for the design and including the STEP files. Tool tray for mounting around the left front rubber foot of the printer (48mm). Pull the handle to rotate the tray for easy access. Designed to hold all K1/K1C/K1SE tools that…
Corners must be printed without supports, oriented small hole down Panels-3mm acrylic (or not acrilic, but 3mm) BOM: 16 m3x6 screws 4 m3x8 (or m3 shorter than 20) 2-4 magnets 6x2mm I guess that you need to use it with cable chain (I don't…
Before you start: Shrinkage compensation - This model was tested in PETG without shrinkage compensation and with ASA with shrinkage compensation and both fit perfectly. Use https://www.printables.com/model/480907 to calculate shrinkage if…
Poop Tray to catch all those poops and then easy to empty into the trash etc. Its 20mm high Which build plate will hit if its lowered to its lowest level. 10mm version which build plate will clear but doesn't hold enough poop (in my…
The base pan tray is designed to provide a sturdy and stable surface for a 3D printer or other machinery, ensuring that debris generated from the CFS filament poop process is neatly contained and easily removable. This is my first model…
The Tingkat is a stackable HEPA filter and acid-free activated carbon (pellet) air scrubber is designed from scratch up for the Creality K1C. It should work for the K1 and K1 Max as well. Less the mounting base, the Tingkat measures 116mm…
The tool tray fits nicely under K1 series printers and is held in place around the front left foot. There are subdivisions for the Creality toolkit, glue, nozzles, screws, and various other tools. Print with PLA. No extra settings like…
Click here to download RIGHT SIDE belt tensioner
Print Install 2x 3*3*5 heat inserts Attach an SSR with 2 M3 screws Attach the mount on the rib next to the motherboard. BOM: 2x 3*3*5 heat inserts 2x M3 screws Creality K1 series heatbed upgrade - Graphite Bed available on Aliexpress: K1…
Lowered down and turned left. So you can see a larger surface of the bed. I printed it with hyper abs. Layer Height: 0.1 mm 1st Layer Height: 0.12 mm Infil: Cross Hatch - 50% (for mor strenght). Supports: Tree(Auto) 30^
Got my hands on a BK1s but felt it looked too realistic so made this mod kit shroud has a thumbscrew knob that allows for tool-less removal; also has cross compatibility with the provided M-lok rails in the BK1S package body cover and…
🔧 BELT TENSIONER UPGRADE FOR CREALITY K1 SERIES Compatible with Creality K1 series machines - K1/K1C/K1SE (not tested on K1 Max) and fully compatible with the 2025 CFS multi-color printing update. The upgrade improves belt tension…
full lid remixed and assembled from the quadrants mode by JEng. Just made in to full lid originally posted by JEng. v2 has the seams more refined
I kept having issues where the bottom eye would snap off due to the layer lines. Since the OG model is printed with the back of the model to the bed, the layer lines cause a weaker join between the chain eyes and the rest of the body.…
Adapter for moving the display to a lower position - so door can be pure rectangle.
Its a standard size buffer tube as the original one with the blaster is a little smaller then i'd like. Print with attachment point on the plate and print upwards. Good for getting some brighter colours on the blaster and its free. Use an…
18mm from holes. Print ABS/ASA with 30-40% infill. Supports may needed. In printer.cfg use x offset=-33,y=-5. 260,295mm(for K1Max). Maybe u can change differently. My Z-offset= 1.6 on Volcano brass Trianglelab nozzle 28.02.24 UPD: more…
This holder was developed based on the experience gained during using of “Creality K1 & K1C top mounted filament spool holder” . Main characteristics of the holder: Quick installation and dismantling of the holder on a 3D printer with…
For this conversion you will need either a dremel, hacksaw or flush cutters to make the cuts. You will also need 2x 4mm M3 heat sets and 2x 8mm M3 screws. Keep in mind if you are using talons you will still need to trim/file down the back…
The BK1s is a great AEB and great blaster overall, with one extremely annoying flaw: the extremely fragile stock lugs. The thin plastic of the BK shell and the high stresses at the small stock attachment lugs usually cause them to shear…
This is a barrel collet for the zius bk1s/2s that uses the sillybutts collet design.
Print with whatever Material you want. I used tree supports. Take one screw from bottom of camera where the mount connects if you dont have any on hand. This will screw into corner of the printer where the original camera goes. Search for…
Барашек на гайки стола Creality K1se, Creality K1С для легкой регулировки стола. Нужны еще пружины 20х8х4
I couldn't find a suitable bracket for the existing k1se holes, so I modeled my own. among other things, I added a 10 degree rise to compensate the sagging chain additionaly mirrored variant to fix wire inside bracket
An extended chain link riser for the print head of your Creality K1SE to allow you to add a drag chain with clearance. 📌 QUICK OVERVIEW • Designed for Creality K1SE • Enables clean cable chain routing similar to the K1C • Replaces the…
Моя разработка улучшенного обдува для сопла принтеров Creality K1, K1C ,K1SE, Использовал тугоплавкий пластик ABS CF, угленаполненный температуру держитб, можно использовать ABS со стеклонаполнением, тоже будет термостойким.
A version of the PTFE tube guide compatible to the HSW from @Leo For the other parts see original model: https://www.printables.com/model/955415-creality-k1-k1c-k1se-360-ptfe-tube-guide. This version was made to use with the HSW for the…
This 3D model is still under development! ########################## Update 28.10.2025 Aded models for Cartographer 3D mount for Stock and BCJ X Carriages ########################## Hi everyone! I made 5015y Anniversary MK1. This is a…
Had this file with me for a while now but have not released it. This design is a remix of a Salient Arms GRY handguard commissioned by someone, which itself was a remix of the BK1S valiant shroud. I have realised SAI does not refer to the…
Attention!!! I do not know the distances from the back wall to the new silicone brush and the plastic drop-off point when CFS replacing filament. At the moment, I can assume that for the modifications with rails, it will be necessary to…
The adapter model for moving the display to a lower position. For those who make a door on the K1SE or want to replace it with a door without a cutout (other K1 series). After the modification, you will only have 6 mm between the floor…
Tired of the stock barrel on your Zius BK1S/BK2S? don't have a 13.4mm chambered barrel? Well, this may help. If you do need this, the tolerances are pretty tight, i've shared 2 unthreaded variants below depending what tolerances you get…
A squared-off remix of KingDeeddee's Bk1s/2s talon magwell sleeve . Instructions to assemble are identical to the original. Print magwell base facing down, with supports.
Printed upright in Creality Print using a Creality K1C - CF PLA with a support threshold angle of 10 should generate supports just on the bottom section which will comes out easily. I didn't require brims or anything, your mileage may…
I Made a more comfortable charging handle, its shorter than the original one on the BK1s or BK2s. To install it remove the original charging handle and use the screw to fit this new one
Goes inside shroud to make the barrel and shroud more solid. V4 is looser on the barrel iirc
This 3D model is still under development! ########################### Update 28.10.2025 Upgraded all models. There was an issue with Cartographer mount distance. ########################### Update 27.10.2025 A new model has been added -…
Держатель для латунный щётки, который прикручивается к poop shoot от cfs kit . Щетка расположена достаточно близко и задевает его при поднятии стола латунной частью, на печати никак не сказывается, только перед чисткой нужно будет…
Got tired of seeing thick/bulky side panels plus seeing you needed extra screws and hardware to mount them. Designed this to be applied without any extra hardware or screws needed. All you need to do is remove the support bars on the…
Welcome aboard. Design inspired by Kanrog's Kobra S1 bed frame. Actively managed and updated by IDOLABS, also on GitHub . I only have basic tools to build this - Easy assembly guaranteed. It shines more when you swap the board. I am on…
I have been running the V1 lid riser from @LEO_app for a while now and I'm happy with it for the most part. It was one of my first prints after getting the printer. The chain used to smack the side wall which was tolerable but after…
Use 92x92 fan for this upgrade
Antivibration legs I made this mod wery long time ago. First for Tevo Tornado and they proved themselves well, not only significantly reducing the noise of the printer, but also positively affected the print quality, since they removed…
This part addresses a mechanical wear issue in the stock Creality K1 / K1 SE toolhead PTFE inlet design that became exacerbated when used with the CFS. Print Use PLA or PETG Print as oriented, no supports 50% infill (gyroid) Screw and…
Speedseal plunger head I scrapped together while waiting for a better replacement and haven't worked out a secure mounting method for. Speedseals allow the plunger to move without a seal during priming (which is important for allowing the…
Hi! I was quickly being fed up with the Creality solution to flushing filament. While dropping inside little poops works, it is a cumbersome and non-elegant solution. So, here I come with the hacksaw, around an hour of printing time and a…
Attention!! I do not know the distances from the back wall to the new silicone brush and the plastic drop-off point when CFS replacing filament. At the moment, I can assume that for the modifications with rails, it will be necessary to…
This model is a top lid support designed specifically as an add-on for the “Creality K1/K1C/K1SE Lid Riser V3 (Frame Extension)” by Printables Model #951012 . Provides better cooling during printing with PLA, PETG, and other filaments…
Creality K1 Series Wide Body Kit WIP. Kickstart your printer's upgrade journey with the Creality K1, K1C, and K1SE Wide Body Modular Starter Kit. This foundational kit includes all the essential frame panels needed to easily expand the…
This is remix to allow you to mount a K1/K1C tool holder to the same printer' Side Panels created by @LEOTE_approach for the K1/K1C/K1SE. I also have a Multiboard compatible version in my profile. Printing 0.20 Layer Height No Supports…
The Zius BK1s / BK2s High-Capacity Battery Stock is a replacement stock option kit for Zius’ AEBs. This upgraded stock can be installed toollessly and fits higher capacity 3S batteries to allow for extended gameplay sessions. This was my…
Bought a door for my K1 SE and the door would not close flush with the frame. This helps the door stay closed. It is a tight fit but after a couple of closes and opens, its perfect. Use at your own discretion.
K1SE Rear drying box PTEF smoother Filament sensor holder
I don't why couldn't find any mount for nebula on k1se so I decided to make one and buy it :D you're gonna need 2 of the 3 screws you removed from the bed/z axis when you bought it(i didn't wanna goi outside look for the same size of the…
This is a remixed of Jian He Zhuang mag sleeve for the Zius BK1s. His version can't be used with a flared magwell and also was a little too tight printed with my Ender 3 v3 SE. I made the top tapered so that it can be used with a flared…
This part strengthens the thin plastic barrel position lips on the BK1s / Bk2s shell or if the these lips have broken then the part with the raised section can replace these lips.
This is an improved version of my original bk mag https://www.printables.com/model/1219069-bk1s-bk2s-magazine-short-10-dart-12-dart-max I have multiple lengths for different print bed sizes 180mm, 220mm 250mm. Only 180 has been tested due…
K1C Chain riser to be used with K1C Lid Riser setups. The design allows for nozzle swaps without having to remove the chain riser. To be printed in ABS or other high heat filaments. Use 1x M3x30 socket head bolt, to secure the chain with…
Adds pre extension to the return spring to improve cycling reliability. Won't seat the end cleanly for stronger settings. Backing off the screw a little can make it a little cleaner.
Mounts for allowing the attachment of the Rev 2 EX BCAR on to the barrel shroud of the Zius BK1S AEB blaster. V1 model is stand alone V2 model uses the Silly SCAR Collet system
Brooklyn Tony's stock lug but with a larger od section added to the stock interface to retain the stock more firmly and eliminate wiggle.
you can use this with the factory bearings or f695 you will need 8 in total 2 for each hole just use m3 bolts as normal and they will work fine you may need a 1 mm washer/shim for the two bottom holes aka the ones you can see from outside…
Due to having no bin available near my printer I made this very simple filament trash bin, which hangs on the metal bar on either side of the printer. The hook is scaled to fit the metal bar perfectly. I have uploaded 2 sizes, one is…
If you have modified your Creality K1C printer by adding a glass plate, you have lost the ability to index the build plate using the original screws. With this additional component, you can set up the build plate as before. Recommended…
This riser elevates the chain by 12mm from its original position without altering the original bolt placement. ______________________________________________________________________________________________________________ /////LINKS FOR…
The "Old Friend" is a single board CW transceiver kit for amateur radio operators. Designed by Dave Benson (K1SWL) and sold by Midnight Design Solutions, it is a fun and rewarding kit to build. However, an enclosure is highly desirable.…
This model is a two piece design that uses the plastic spool holder that came with the Creality K1SE, to mount the spool to the center (metal) cross member bar on the side. This design allows you the ability to mount as far back or…
A simple build from the 3d print perspective BUT! you will need to solder an extender for your battery cable. Ive used an XT60 connector with around 100 to 140 mm of wire to reach the battery pack, (any junctions you add can be hidden…
k1se cabin extension 150 mm. The original was 40 mm. I extended it.
I was inspired by Articulating Camera Mount models by @Sneaks and @Mathieu_340410, but needed a way to mount the setup on my K1SE frame. This is a quick snap-on model I managed to create in half an hour in freecad. Print with automatic…
its a extended charging handle for the bk1s/bk2s
I wasn't sure about cutting up my BK shell for a talon mod, so designed a magazine. I have an Bambu a1 mini so this mag is the limit of print bed size, it uses a talon spring so easy to get hold of. I've made multiple revisions and tweaks…
string: added douple mounting holes for btt sfs 2.0 redesigned for more firmly assembly corner: redesigned for more firmly assambly, smaller holes for fixing with self-tapping screw
The original Tingkat uses active carbon pellets (acid free). I was not able to find them, so I create this remix to use the Anycubic Photon / Elegoo carbon filter instead. All other parts are the same.
damit man mit dem K1 SE noch mehr tolle Sachen machen kann ist ein geschlossenes Gehäuse von Vorteil hier mein Entwurf PS …Wird immer noch verfeinert Wer Vorschläge oder Wünsche hat darf sich gerne melden Für die DXF Daten bitte kurz…
!USING STEP FILES! The project is a 3D printer exhaust system designed to remove harmful fumes and particles. Materials used: 1. M3 bolts for securely fastening all components of the system. 2. 4010 12V fans (2 units) that provide air…
One of my favourite blaster is the BK1s. When I made the super drum, I was thinking what if there is a version I can use on it. So here is my attempt. DO NOT use more than 3 drum springs as I found that it can stop the piston from…
Print in TPU, PLA or PETG I printed mine in TPU with: 5 Walls 75% Infill
The Zius BK1s Decorative Barrel Shroud is a stylized replacement to the black barrel shroud included with the Zius BK1s AEB. Featuring top and Bottom Picatinny Rail and M-Lok side holes, this 3D part replicates the function of the…
Just changed the base to accept the Prusa bayonet style of spool holder Also I recommend adding the K1SE filament sensor mount that changes the filament sensor position to the side. It's honeycomb and found somewhere on Printables, I think…
A side mounted buildplate holder for Creality K1/K1c/K1se, screwed to the side of the printer. Stores up to 5 buildplates. It attaches on the bottom 4 side panel mounting points with m3x8 screws Files available are as one part and split…
I designed a TPU anti-rattle seal that sits right between the lid and the frame on Creality K1 (possibly K2) printers to stop any annoying vibrations while printing. I measured everything out and modeled it in Fusion. The file is provided…
I don't why couldn't find any mount for nebula on k1se so I decided to make one and buy it :D you're gonna need 2 of the 3 screws you removed from the bed/z axis when you bought it(i didn't wanna goi outside look for the same size of the…
k1se cabin extension 150 mm. The original was 40 mm. I extended it.
I was inspired by Articulating Camera Mount models by @Sneaks and @Mathieu_340410, but needed a way to mount the setup on my K1SE frame. This is a quick snap-on model I managed to create in half an hour in freecad. Print with automatic…
🔧 BELT TENSIONER UPGRADE FOR CREALITY K1 SERIES Compatible with Creality K1 series machines - K1/K1C/K1SE (not tested on K1 Max) and fully compatible with the 2025 CFS multi-color printing update. The upgrade improves belt tension…
Got tired of seeing thick/bulky side panels plus seeing you needed extra screws and hardware to mount them. Designed this to be applied without any extra hardware or screws needed. All you need to do is remove the support bars on the…
K1C Chain riser to be used with K1C Lid Riser setups. The design allows for nozzle swaps without having to remove the chain riser. To be printed in ABS or other high heat filaments. Use 1x M3x30 socket head bolt, to secure the chain with…
designed to mount 120mm fans on the bottom of a k1SE. Mounted and tested Fully functional with Printers that have been well dialed in or just basic set up. making this kept my mcu under 50c even with 100c bed temps on long prints. i do…
In der Modeldatei sind alle Bauteile hinterlegt. Nicht geänderte Dateien müssen noch vom Originalautor herunter geladen werden. Der Bumper für die Kette und die Ventilschieber, für die Seite und für vorne, sind auf Grund der Größe…
3D model of the K1|K1C printer for anyone who wants to develop new products for it. *Just the Body and panels FORMAT| STEP
*If you have any issues with printing or assembly, feel free to message me, and I'll do my best to assist you 😉. *There is a version made for the K1 SE that allows keeping the original reinforcements that come with the printer. /////LOGO…
The other Feet Adapters I made work pretty good, but at highest speeds, I did feel the printer swayed more than i wanted, mainly because they are right under he printer, and the printer is tall, and the movement is happening in the top...…
*If you have any issues with printing or assembly, feel free to message me, and I'll do my best to assist you 😉. *There is a version made for the K1 SE that allows keeping the original reinforcements that come with the printer.…
![[IL.00 | K1SL] Creality K1 / Max Superlight Bed Frame](https://media.printables.com/media/prints/33487bd5-4c8b-4bee-a8de-80c4ceef478d/images/11567964_7680d05f-fcae-4248-a30d-b1034d02d72c_4b4f0a47-6e2f-4e3c-a28c-a4c0dffdb619/imiji_2025-12-31_130803295.png)
![CREALITY K1 | K1C | K1SE - FRONT CHAIN RISER [12mm] Standard nut M3](https://media.printables.com/media/prints/0e99fdf3-bf6b-45e6-875c-1c8df6d7446f/images/11323368_404f4ccf-1bd3-4e82-b116-f62fe9a5d086_71e5f742-acdc-4da1-8a85-658bf23a6fb1/photo1.jpg)
![CREALITY K1 | K1C | K1SE - LID RISER V2 [now 65mm height] [Original by LEOTE]](https://media.printables.com/media/prints/54cf1abf-e01f-48de-8607-c7e01d896aa0/images/12763660_ecd14738-7bbe-4a15-8ce2-44ee762f57b5_a8aaaa2a-e350-4230-9304-761f5a4baebb/riser-5-img_20260425_203911.jpg)
![CREALITY K1 | K1C | K1SE - SIDE PANELS [CLOSED + SPOOL HOLDER]](https://media.printables.com/media/prints/1191358/images/8999912_a1196bcb-e87c-4ad4-bcbd-72f9a4dd8923_2e0fccde-c1dd-4894-a20f-c4f2ded9bc40/k1_k1c_k1se_side_panel_00s.jpg)
![CREALITY K1 | K1C | K1SE - SIDE PANELS WITHOUT LOGO [CLOSED + SPOOL HOLDER]](https://media.printables.com/media/prints/1205288/images/9053805_37d7af3d-3764-4f07-b69e-81118d63cf2e_2159a592-91c5-4d86-8fa6-cc82274b00d1/k1_k1c_k1se_side_panels_without-logos.jpg)