Counting matching models…
This model is a part of the conveyor belt collection , but can be used standalone. Printing instructions: - Print flat Assembly instructions: - Press 2 M3 threaded inserts in the holes on the side - Use 2 small M3 set screws to secure the…
Andor / Mandalorian s3 version of the DC15S carbine as seen in the flashbacks with clone troopers. I did my best to make it as accurate as possible given the limited reference material available at the time of uploading. This blaster…
Magnet of the Ohio State University Buckeyes Logo. This model has holes for 6mm x 3mm magnets. Base layer should be White. G-CODE has four layer pauses: 3.8mm: add magnets 4.0mm: color change to Light Grey 4.6mm: color change to Red…
I absolutely loved tacohittah's ornament , but I wanted a bigger version on a stand as a display piece. I closed the hole on the ornament, made it 300% bigger, and added a stand with the IOWA branding as an inlay. All of the pieces are…
Round Coin/Coaster of Brutus Buckeye. Could also be used as a game token or coin
Bring the Marvel universe into your collection with this highly detailed 3D printable figure of Hawkeye with Baby Groot perched on his shoulder. This unique collectible captures the perfect balance between action and charm — showcasing…
Remixed from https://www.printables.com/model/184911-iowa-hawkeyes-decoration by Dylan2868. Changes fixed thin walls made logo and border flush added some thickness to black layers to give it some additional heft added hole at top to use…
Part of my Marvel's Avengers Coaster collection where other Avenger coasters can be found. Also print the Avengers Coaster Holder to keep all your Marvel Coasters in! Designed these using Fusion 360 after my favourite comic book, movie,…
Ohio State Buckeyes Oversized Necklace Logo that I designed. I hope you enjoy!
Here is a coaster for the Iowa Hawkeye fan in your life! This is originally made by Dart31 on Thingieverse. I printed this with 15% infill using CookieCad PLA in Black and Prusament PLA in Oh My Gold. You can print this coaster with:…
Mount for Radiomaster Pocket and Hawkeye 3.5inch FPV monitor Requires screw (M3x12 works well) to fix monitor to mount. Mount snaps onto Pocket "To attach, put the bracket over the strap mount point on the centre or the radio at an angle.…
Made this for my sister. I sized it to my Ender 3 Bed and dropped it down to get about 2-4mm of bottom layers before doing a color change for the boarder and Hawkeye logo. Category: Art
I have a bunch of light switches that need to stay on (or off) all the time. Turning them on (or off) will cause issues. So I designed this cover, and gave you two options: one has a slit so you can use a small tool to slide the switch up…
Model of Subaru Impreza GD Hawkeye Dimensions Length: ~ 38mm Width: ~ 30mm Height: ~ 1.8mm Print settings Nozzle 0.4 mm Layer height 0.2 mm Material PLA If you want to see more of my Subaru projects, check out my profile !
Famous US Early Warning (EW) aircraft. Still in service and upgraded continuously. Designed by: http://logic-wizard.art.coocan.jp/fms_e.htm Hint: Glue: UHU hart, make "legs" from skewer (24mm).…
I wanted a coaster with a lip so made a negative image version. Much thanks to original designer. Print Settings Printer Brand: Monoprice Printer: Mini Delta Rafts: No Supports: No Resolution: 0.28 Infill: 20% Category: Decor
With Parametric Fusion 360 files. So stem could be easily modified to be taller or shorter No supports. Only brim needed for tall part Easy to disassemble Held by friction Stem must be printed in shown upsidedown orientation for it to be…
M.A.S.H. - Captain Benjamin Franklin Hawkeye Pierce - 1972-1983
This standalone Sockeye Salmon statue highlights detailed scales, flowing fins, and lifelike body shape. No base is included, making it ideal for hobby displays, desktop decor, or freshwater fish collections. Prints beautifully in matte…
M.A.S.H. - Alan Alda - Hawkeye Pierce - 1972 3D printable model.
This truck/bogey set can be printed out in multiple materials, snapped together without hardware or glue, and can use generic plastic or metal wheel & axle sets. The tongue on the crossframe has the tower with a hole through it to mount…
This is an easy printable mount support for Hawkeye thumb 4k camera. Must be in TPU material. For the installation you'll need 2xM2 screws, the one's in the pictures are perfect. Its suitable for all canopy Mobula style. Enjoy! Print…
*** PLEASE READ *** I’ve received notice from Printables concerning my helmet designs. I don’t agree with the notice, but have decided to move my helmets to my Patreon Platform. I’ve actually had multiple requests to offer an avenue to…
A small model of a commonly-sold 5V relay block to use when laying out electronics bays and the like. Not really intended for printing, rather to use as a guide for mounting hole placement and height clearance etc. It's as accurate…
Bracket for the Hawkeye Thumb 2, inspired by Painless360's thing: https://www.thingiverse.com/thing:6593421 .
Brutus Buckeye shelf sitter. Print in place, definitely needs supports for the hat.
*** PLEASE READ *** I’ve received notice from Printables concerning my helmet designs. I don’t agree with the notice, but have decided to move my helmets to my Patreon Platform. I’ve actually had multiple requests to offer an avenue to…
Hawkeye logo for the University of Iowa on an Iowa background. I included a color change in the slice so the logo was a different color than the state. Space for a small magnet on the back. Printed with Hatchbox PETG bright yellow and…
I recently purchased a Craftsman 109 lathe off of Craigslist. Unfortunately, not all of the gears were present. After a LOT of hunting, I finally found all of the information I needed to create DXFs for the gears at…
It uses a real airfoil. In fact with 1 wing on it'll roll to the side without the wing.
This file is for the Xshot Hawkeye blaster. The file is to fill in the deadspace of the Xshot Hawkeye plunger.
A remix of clubclays AudioEngine A2+ volume knob from ThingyVerse. I found that the original slipped on the volume knob, so I created a version that replaces the stock knob. Slide off your original knob and press this one into place.
Iowa Hawkeyes Oversized Necklace Logo that I designed. I hope you enjoy!
Use a M3 screw to mount the sensor. The outer diameter is Ø21mm. I have used the sensor for my clubs g scale (LGB) indoor layout to control some signals
Recording Artists - Alicia Keyes
Remix of another project I can't remember
Fusion 360 file included! It's a magnetic mount for TX16S and Hawkeye 3.5inch FPV monitor Short demonstration video: https://youtu.be/c1FKlvVu_cY Printing: Open stl, split to objects/parts (there are 2 parts), orient as in photo and…
Presenting a purpose-designed base or platform crafted to accommodate the Keyestudio KS0429 Total Dissolved Solids (TDS) Sensor. This rectangular base ensures a stable and secure foundation, facilitating the integration of the TDS sensor…
This switch cover was designed for Prusa MMU. In PrusaSlicer use “smart fill” to select the different contours. Each section has a .001" height difference to allow for easy color selection. Print face down.
Fit tightly to the inside of a lynx muzzle and keyed for 40cm. Alternatives provided if your barrel pushes the notch too far forward (marked as the tenths of a mm it's moved).
box for a Keyer. -variable speed -PS2 keyboard as input -16X2 LCD screen -Side Tone (speaker) -built-in battery with charging port -on/off switch -input for Iambic Paddle -output for driving a Transceiver i have not taken pictures of the…
Bear with me here. I have a 8500 BTU rated portable air conditioner from Hisense (Lowe's: https://www.lowes.com/pd/Hisense-500-sq-ft-115-Volt-Grey-Portable-Air-Conditioner/1000537611). As is often the case with disposable electronics, the…
This mounting system was originally designed to be used with Manfrotto Magic Arms in laboratory environments, but can be adapted to all sorts of applications. The camera rails have a fixed distance to the center of the ring-lights and the…
The Grumman E-2 Hawkeye is a carrier-based early warning and control aircraft used primarily by the United States Navy. Introduced in the 1960s, it features a distinctive rotating radar dome mounted above the fuselage, allowing it to…
Update April 23 2025 On the Nylon Set Screws The threads don't necessarily hold strongly within the hole. I've had success with them though in a couple ways While the knob is off, turn the set screw to the minimum depth needed to hold the…
A remix of W6IPA's Mega Keyer enclosure design so that there is now a printed bottom, top and sides. I also added the "engraving" for the port names. There is a video on YouTube of the keyer in action https://youtu.be/KYbplGL4TiI Encoder…
A mount fot the Hawkeye Thumb 4K
Cut the blaster at just before the line just above the grip, install the new plunger rod. Cut the rear plates to fit, gluing the right side on the ledge and using it to line up the other side. Print the plunger rod with 3 walls, 10 top…
ESP32 Keyestudio Dev Board Caddy Tray This caddy/tray has been designed to protect the ESP32 Keyestudio Dev board. Printed on 0.2mm PLA, no need for supports. 4x silicone self adhesive feet hold it firm on the workbench. I've included a…
20, 30, 40 degree fpv mount for Hawkeye FireFly Micro 2 ! U can use zip ties for a more secure hold. Lot of mounts for OLD VERSION of this camera is lying around, but it won't fit as Micro 2 is bigger! Added 20, 30 and 40-degree version…
Celestial BCAR but with the mount adjusted to fit snugly into a Lynx and be secured by the pin. Existed before in the original files, but in very limited configurations. It just seemed a little moot at the time since a standard lynx is…
Hawkeye 4K Thumb case to protect the camera.. Print this in TPU Category: R/C Vehicles
Keyestudio mks base gen 1.4 board cover and stand.. some holes for cables or airflow.. you chose.. reset button for case included Print instructions Category: 3D Printer Accessories Summary Keyestudio mks base gen 1.4 board cover and…
This is a cookie cutter of Hawkeye's comic's mask
This Hawkeye pirate file will include a highly detailed sculpture of this character on a base. Each file will work in a resin or FDM printer. Feel free to scale this up or down accordingly. This is a personal use-only file. Use it to…
3D model description [The minifigure is not included in the purchase! In case of misunderstanding, I do not assume any responsibility] Minifigures compatible LEGO base plate for Hawkeye + blind dog minifigures Hawkeye is an American…
Default print profile, mounted with M2 hard drive screws. Product page: https://www.keyestudio.com/products/keyestudio-esp32-plus-development-board-woroom-32-module-wifibluetooth-compatible-with-arduino
TDS metre KEYESTUDIO TDS metre Sensor (.f3d / .step) TDS metre board (.f3d / .step) link: AliExpress
Attach a cleat and hang containers where you need them to keep yourself organised. Centre key on the cleat locks it in place and prevents sideways sliding. Can be used to hang anything from parts containers to picture frames. If you…
Joystick handle for Micro:bit module from Keyestudio https://wiki.keyestudio.com/KS0296_Keyestudio_Joystick_Breakout_Board_for_micro_bit The handle has the ability to mount a basket for 18650 1pcs batteries and a power switch. You need…
Camera Keyence and light holder Camera CA 200M Light CA-DRW13M
Printed with PETG Perimeters min: 4 the holder has been designed to be as small as possible, but at the same time strong.
Full lean angle for the thumb camera and comfy place for a small gps module.
Summary Wall mount casing for the Keyes DHT22 / AM3202 module. Enjoy! Watch the making off @ YouTube: https://www.youtube.com/watch?v=jPjaodAKAKo Instructions You only need 3 x M3x8 to enclose the DHT module.
V2 Hawkeye mount design with Fusion 360 files No supports and no brim needed Held by friction Requires 3pcs M3x12 (2 screws for TX16S and 1 screw for monitor) 3 slots in radio mount currently has no use but it's left in case later mounts…
Easy to use Adjustable bracket for keyence sensors or any sensor with M18 threads. Uses ¼-20x1 ½ bolt with nut for the hinge and a 5/16 bolt to mounting bolt.
Keyence LR-TB2000C bracket with hole for 4mm countersunk head screw. The sensor is held on a M3x32 screw. recessed nut M3n from the side.
This object was made in Tinkercad. Edit it online https://www.tinkercad.com/things/j4mshWYzBS2 Added a "D" keyed hole for the USB-C entry, and changes the right-most port to accept a HDMI connector. Print instructions Category: 3D…
A module for the Keyestudio W5500 board to be mounted in the 19" DAP 2U rack frame . To use the front plate you have to remove the power jack of the board. The front plate has three 3mm holes for LEDs. Use M3 screws to mount the board…
I wanted a way to hold down my keyer, especially since this AME key has exposed parts that make it difficult to support with the other hand. The base allows a passthrough for the cable or installation of an audio jack, and then can be…
(UPDATED 096-06-2020) Created a smaller version that still fits perfectly. Tried the others but would not work with My Emax Hawk 5, with a capacitor. So I went to Fusion 360 and modeled this up. Fits like a glove. Everything is keyed, and…
I wanted a cheap CW keyer for my G90 radio and found one on thingiverse but when I went back to download it; it was gone so i had to 3D model a new one.
Bring your favorite designs to life with this high-quality, layered keychain! Designed with 3D printing in mind, this model features distinct height levels for each color, making it incredibly easy to achieve a vibrant, multi-colored look…
Created with Fusion 360 then airbrushed. The individual parts were glued (cyanoacrylate) to the base after printing (& painting). The following Vallejo airbrush colours were used to complete the look. Marvel Studios Logo - White (71.001)…
This block was designed to fit the Ks0308 keyestudio Motor Drive Breakout Board for micro bit and the BBC microbit.
inspired by marvel universe Category: Games
Hawkeye nameplate, kinda of experimental if you give it a shot and it doesn't work I would love to hear how it turns out! For more cool 3d printing stuff check out my Instagram: @djs_3dprinting Category: 3D Printing
Ultimate Iowa Hawkeye fan set for when the game is close or a Cyclone fan shows up. Completely my design. Three separate pieces. Never find another set like this gem. Be cool on a desk or in a man-cave on the bar.
This remix was created to correct the dimensions of the original model. The issue was that the TPU part was about 1 mm wider than the slot in the top plate, causing fitment problems. The remix was completely re-created parametrically…
My boss asked for a project box for the Keyestudio W5500 , with holes for zip ties and enough space for a short Arduino hat. The board slides into the grooves on the interior walls and bridge across the top is for wire harness strain…
This cover protects the buttons and potentiometer on the Ultra PicoKeyer, a device that adds iambic keyer functionality and CW message memory to any radio. Some users have had their batteries die due to the device being put into beacon…
Fuddled my way through Fusion 360 to make a keyed rotary switch for my Schumacher Battery Charger. This also fits my crockpot, so it might fit a bunch of things. I printed mine with fuzzy mode, and didn't remove the support in the arrow,…
Spiderman LED Light Box I use the 6.5' Monster brand LEDs. They are available on Amazon for about $10 each: Amazon.com: Monster 6.5-Foot Color-Changing LED Light Strip, Multiple Combinations and Modifications, Remote Control, 5-Volt USB…
I created a mount for the MakerHawk Camera. I attached it with 2 M3 screws. If there are any wishes/ideas or changes that should be done. Please let me know.
I knocked up this little mount so I could attach a little Hawkeye Little Pilot 3.5" monitor onto my TX16S Transmitter. It has a stepped 3mm mount hole (so you can use small washers if required) and uses an M4 bolt and nut to clamp it to…
Decidueye x Hawkeye pokemon x marvel Check out my other designs.
Case for Keyes Endstop Switch to use it as 1.75mm Filament Sensor. Still working on a mount for CR-10. Print Settings Printer: Creality CR-10 Rafts: Doesn't Matter Supports: Doesn't Matter Resolution: .15 or lower Infill: 100% Notes: WIP…
Case for the CW QRS keyer of the Telegram channel, https://cwqrs.it/ , designed by me for 3D printing, inspired by the original Software and hardware development: Alfredo, IK4POF PCB design, hardware development and assembly: Walter,…
This is a Din Rail mount for a KEYESTUDIO Pico breakout board. The board can be used with Raspberry Pi Pico Versions one and two. You will need to print one tab for this design. It can be found at https://www.thingiverse.com/thing:3401942…
Token Arrows for the Hawkeye Ally in marvel champions No supports, change colour at 10 and 11 when printing with a 0.2mm layer. (I recommend starting with red, changing to black at layer 10, changing to white at layer 11) Create layer…
its a benchy. has more over bridging than most so some supports may make it better but its very possible with tunes settings you wont need them. good luck . if you print it i would like to see what it come out like with your settings and…
If you like vinyl records and Hawkeye, you will appreciate this 3D printable model of a 45 record adapter with a Hawkeye logo design. This adapter lets you play your 7 inch records with a larger hole on a standard record player. It also…
Funkce detekce stěn využívá senzory k detekci přítomnosti překážek v okruhu 180°, jako jsou stěny a další objekty v dráze vozu, a umožňuje vozu automaticky zastavit nebo změnit směr jízdy, aby se vyhnul kolizi. Tato funkce může být…
NOT A PERFECT FIT! Was designed in a hurry for it's intended use only on a rally car. Was printed in TPU and glued (sikaflex) into bumper as the driver smashed the vents out almost every event as can be seen in photos. The final version…
This thing contains a mounting plate and a drilling guide for the “Keyes Mosfet Power Control Board”. The base plate is 1.5 mm thick. M2 5 mm or 1/4″ 4-40 screws are needed to fasten the board to the mounting plate. The mounting holes are…
Part of the OpenScan Benchy 3D Scanner comparison, see https://github.com/OpenScanEu/OpenScanBenchy/ We publish all the original files (send by the participants) as well as the aligned version shown in the final rendering. Feel free to…
