Counting matching models…
Hello, Bazukino, a toy soldier sculpture. Thanks for your download, enjoy the print!
Print approx. €6.69–€8.18 excl. taxPreliminary estimate for one variant
A large, easy to read score tracker for Crokinole. The tracker makes use of the spare, thirteenth disc that comes with most Crokinole disc sets. Simply move the disk to the appropriate slot to track score throughout a match to 100. The…
Print approx. €7.95–€9.72 excl. taxPreliminary estimate for one variant
Meet NokiNoki , the ultimate 3D-printable espresso knock box designed for coffee enthusiasts and home baristas! With a large capacity for used coffee pucks, a built-in splash guard , and an optimized design for support-free 3D printing ,…
Print approx. €13.77–€16.82 excl. taxPreliminary estimate for PETGSource material: PET
Crokinole score tracker meant to fit inside a crokinole disc hard carry case from Brown Castle Games or Amazon. You can pick 0-95 or 5-100 point sets depending on your preference. As requested, there's a tournament variation too to track…
Print approx. €2.84–€3.47 excl. taxPreliminary estimate for one variant
Please leave comments and photos of your print
Summary This is a (almost) fully 3d-printable kit of rings to connect the Samyang/Rokinon 135mm f/2.0 lens onto a light and small star tracker (such as the Sky Watcher Star Adventurer) or an equatorial mount (such as the Sky Watcher EQ6).…
The table I use for playing crokinole is barely bigger than my crokinole board, so there's not much room to keep your discs as you're playing. I designed this disc holder for this purpose. It hangs off the rail of a round tournament-size…
I was looking for a good solution to make the focuser motor work with my Samyang 135mm lens on the OAT. I decided to just design my own. I think this ended up working well. There are two sets of rings, small and large. The small rings…
A simple cylinder to hold crokinole discs remixed for a Mayday board. This sleeve will hold 8 discs above the rim of the gutter.
Note: Due to differences in the shape of the Nikon vs Canon version of the lens, this file will need to be slightly modified if you wish to use this with a non-Nikon Roki/Samyang 135. Specifically, the raised lip on the inside of the rear…
Based off of Crokinole Canada's specifications, this is a dimentionally accurate Crokinole Disc. If printed on the PEI Smooth Spring Steel Sheet, the bottom of the disc will be smooth enough to play successfully! Made as the "Traditional…
A tabletop holder to store your your 20s in Crokinole. Accommodates up to 8 discs for those perfect games, or use one holder for all players. A cutout in two sides of the holder allows you to easily keep track of how many 20s have been…
Quick prototype for a 110 film holder to elevate the film when scanning with a DSLR. Model parts should snap into place. Tested on a Prusa Mini using 0.15mm nozzle under SPEED settings in Prusa Slicer with a 20% infill If you want this…
A tube with a twist on lid to store one set of tournament sized (1 ¼" x ⅜") Crokinole discs. As many sets contain a spare disc, this tube is designed to accommodate 13 discs. Tolerances are pretty loose in order to account for variations…
A 20s holder for Crokinole. The holder mounts onto the side rail of your board. It is meant for boards with a typical ¼" width sidewall. Windows on four sides of the holder allows you to easily keep track of how many 20s have been sunk…
Rack to hold 12 Crokinole disks. There are 2 versions: a Tournament Size (1-1/4" Disks) and a Traditional Size (1-1/8" Disks).
This is a cribbage-inspired box I made to hold my crokinole disks printed in white at .2mm layer height. There's a point tracker on the lid along with a round/game tracker at the top. The holes are sized for the pegs in the project, which…
Crokinole-finger flicking fun Easy to lean, but hard to master Find rules on the internet This one for an examble Print instructions Watch first couple of layers are perfect , as this will be the playing surface.(Up side of the board)…
(tpu recomended, might to adjust sizing for rigid plastics) A lens cap is an essential accessory for any camera lens to protect it from dust, scratches, and other environmental elements. A 3D printed lens cap for a 14mm Rokinon lens…
Ersatz-Kurbel kompatibel zu DUX KINO 68 Meine DUX KINO original 68 Kurbel ist leider zerbrochen, daher habe ich sie rekonstruiert. Gedruckt, Mat: PLA (PETG, ABS oder PC, auch denkbar) Füllung 100% Getestet, funktioniert. P.S. Der kleine…
Crokinole trophy. Print at 10-15% infill. Put letters on the base if you would like. I recommend using the emboss tool. It prints in 2 parts without supports. Use super glue to attach.
Update 2026-01-01: As some people play with 12 discs in a 2-player game, I added two different files to support 12 discs: a 6x2 tray and a 4x3 tray. The 6x2 tray may not fit on smaller print beds, but the 4x3 tray should fit most. - - - -…
A mod to Arca Swiss Plate and Top Bracket to use m4x6x6mm threaded inserts. Also focuser mount for a NEMA17 motor. Included step and fusion file for the NEMA mount since it is a complete redesign. Could be easily modified for different…
Board for Crokinole score keeping (non-tournament scoring).
A magical keycap inspired by Usagi Tsukino, the beloved Sailor Moon herself. Featuring her iconic hairstyle and cheerful expression, this design embodies her playful yet heroic personality. Perfect for fans of classic anime and collectors…
I designed a system to hang my Ferti Crokinole on the wall. It consists on 2 bottom hooks and 1 top hook. You have to tilt the board to introduce the crokinole slot in the top hook, rotate it to make it vertical and slide it down to the…
Crokinole 20 point disk holder fits snuggly on 5mm edge and holds 7 disks, or use optional stand to sit on table. My design has a floor so no gap for disks to fall through. Images shown using clear PETG filament Easily print with PLA or…
Disk Holder that can be used sitting on the rim of a Traceys board or used on the table. 20 holder should be printed with support. No supports needed for the disk holder.
Welcome to a wonderful little wall mount designed specifically for the Tracey Tournament boards. You do have to do a little drilling in the back of the board but that's easy enough and it'll make the mount extra secure IMO. You will need…
WIP Remix of arca swiss plate and top bracket for better heated insert fit. Inserts are pressed into opposite side from which they will be pulled to help avoid pullout in case you have junk inserts like me. After pressing in the heated…
Just a peg you can use for your Crokinole game. Either for the board, or for your scoring device if it uses those pegs. I had some extra colors of discs, but they didn't have any pegs for the scoring track. The custom Disc Holders in the…
This doohickey makes it easy to pull a crokinole disk out of the 20 hole. Fits Brown Castle boards, 1.38" diameter, 0.15" height.
Message me if you have an older Tracey board and need a 6mm gap. Or feel free to edit the file yourself.
💖 Support Me If you like this model and want to use it for commercial purposes, you can support me on Patreon and get a commercial license: https://www.patreon.com/cw/MonsieurPierre A delicate and elegant figurine inspired by Usagi…
Bring Crokinole anywhere you go! with this mini table top version.
Found lots of options for ZWO EAFS but no Gemini so I made one It bolts to the top of a dovetail bar. The horizontal slot for the motor screws allow tensioning of the belt. Printed out of PETG-CF with lots of walls and infill. Check .3MF…
I remixed this from something I found (though don't remember anymore where). This is a flats panel for taking flats used in astrophotography. Simply insert the 5" EL Panel (circle) into the base, glue the insert into place. The cap should…
Ersatz-Film-Deckel kompatibel für DUX KINO 68
Just a modification to my useability but thought it could be useful for others. To use, please make sure to download the other parts from danibor09's page. 80mm top/bottom knob top plate
This is an old model of mine that I'm finally uploading. It is a disk for the game Crokinole . With the right number of perimeters and infill percentage, it can match the weight of the wooden version.
💖 Support Me If you like this model and want to use it for commercial purposes, you can support me on Patreon and get a commercial license: https://www.patreon.com/cw/MonsieurPierre A graceful and iconic figurine inspired by Usagi Tsukino…
I don't usually need to use the kase filter holder at the same time as the lens hood on my lenses. But - I use the Samyang (or Rokinon - seems to be the same lens) 135mm f2 lens for astrophotography - and in certain situations I am…
Crokinole 13 Disk Holder/Dispenser v3 modified from my original version Difficult to remove support material from CROKINOLE text. If using PrusaSlicer you can add support blocker for the CROKINOLE text while keeping support for window…
This is a model of a Makino V56i CNC machine Print Settings Printer Brand: LulzBot Printer: TAZ 5 Supports: Doesn't Matter Notes: rotate model 90 degrees on the Y axis to minimize supports Category: Machine Tools
Holds 8 Crokinole discs in a stackable holder. Print multiple and stack them for compact storage
Wanted to add a fan to the front of an Okinos Aqua 3 that I use for testing some PC components to increase airflow at the expense of long GPUs. I printed the first 2 layers in transparent and swapped to white in order to display my RGB,…
Everything is printable without supports. Print all parts labeled TPU at the end out of TPU, print the Lid_insert with 0 top layers, 1 perimeter and 10% gyroid infill. You will need 6x M3x20mm screws for the hinge and latches. If you are…
Mounting rings and a Bahtinov focusing mask designed for the Samyang 135mm f/2 ED UMC / Rokinon 135mm f/2 lens. Update June 6th, 2026: Added fron and rear top rings parts for the focuser holder Added focuser holder The Bahtinov mask…
Po zakoupeni LabBoxu jsem zjistil, že potrebuji odmerit množství chemikalii. všechny výtisky jsou tisknuty s plnymi stěnami. Nastavení upraveno podle navodu Průši na vodotesný tisk. koule.stl slouží k namichání chemie v poměru 1 ku 25.…
Halter für Handtasche am Getränkehalter im Kino, Halter für die Handtasche ist extra abgerundet, um die Handtasche zu schonen. Die Handtsche im Bild hat 2,8 kg gewogen.
Crokinole is an awesome game where you try to get the buttons in the hole – shooting from the outside of the circle.
I needed a way to hang my new Crokinole board on the wall. Print Settings Printer Brand: Prusa Printer: Prusa Clone **Supports:** No Resolution: .2 **Filament:** sanSmart TPU and MG Chem PetG TPU and PET-G Blue and Clear Notes: Printed…
Lens hood cap created and located here: I have produced two new versions of my Rokinon/Samyang CineAF lens hood. These models are designed with reversible bayonet mounts (one inside and one outside the hood) this allows the hood to be…
I used these clamps to mount my image-train to a dovetail, that gets mounted to my Astrophotography Goto Mount. Printed in PET-CF Part was scaled to 102% to fit Printed slow and high wall count The 3mf shows orientation and print details
Fits 1.5 inch board Original design only fit 1 inch thick boards, I remodeled it to fit mine. Now my board has a spot thats not on the floor leaning against the wall.
This is a set of accessories for the Samyang / Rokinon 135 f/2 lens: Lens hood Bahtinov mask Flat panel for flats and darks Extra meterials: You will need some self-adhesive flocking material if you're not OK with the lens hood reflection…
A simple little insert for the card game Kinoko. Fits the included dice and tokens underneath the cards. the instructions fit on top. Holds everything in place and organized. There was a slight amount of pressure to push it down into the…
Die Maße sind ca.: Höhe: 4cm Länge: 9,5cm Breite: 7,5cm Gedruckt mit PLA.
This is a gridfinity bin designed to store the Samyang or Rokinon 14mm f/2.8 wide angle lens for the Nikon Z mount system. The bin is 3x4 gridfinity units and 10U high. The cutout is at 5U height. I also included a version with cutout for…
A replacement focus ring for the Rokinon 35-70 "P" lens. The fit is snug enough that friction should keep it in place, but a drop of glue would keep it from falling off on you. Tested with both PLA and ABS and the tolerances seem just…
If you have multicolour print I recommend to give a different colour to the last couple layers so that the letters are a different colour and are more visible. I made it in full white pla and then painted the top black as I don't have…
I realized that my Rokinon / Samyang CineAF reversible lens hoods needed a cap so I designed this one. Here are the lens hoods this cap was designed for: Mine was printed in Gray Polymaker ASA on my Qidi X-Max 3. The edges on this are…
Theese are mini models of Russin rock group KINO most popular guitars (I added pictures for comparison)
Introduction I’m sharing a travel version of the well-known skill game, Crokinole. The objective is to flick discs toward the center of the board while trying to ensure your opponent scores fewer points. It’s worth noting that this…
Wanted to add a fan to the front of an Okinos Aqua 3 that I use for testing some PC components to increase airflow at the expense of long GPUs. I printed the first 2 layers in transparent and swapped to white in order to display my RGB,…
Fits two full sets with room for a spare of each color. Needs to be scaled to 2540% because I'm dumb and didn't export it correctly.
I used these clamps to mount my image-train to a dovetail, that gets mounted to my Astrophotography Goto Mount. Printed in PET-CF Part was scaled to 102% to fit Printed slow and high wall count The 3mf shows orientation and print details
Purchase the Rokinon 135mm f/2 lens - https://amzn.to/3QN8Uko Consider supporting my work on Patreon: https://www.patreon.com/c/Designbydave EDIT 1-28-25 New “generic” version of the rig included. This version removes the non-standard…
A template to determine the location of the posts on a Crokinole board I'm building.
Fits two full sets with room for a spare of each color. Needs to be scaled to 2540% because I'm dumb and didn't export it correctly.
This is very similar to and inspired by, but not a remix of, another excellent crokinole disc holder by @Strider460_271212 . That design can be found here: https://www.printables.com/model/200655-crokinole-disk-rack . I wanted to learn…
Imported the cover from Last Hero and sketched over it. Print instructions I used M600 in Marlin to perform the filament change at layer height, but Cura also has an option to do the filament change.
DUX KINO 68 Erstz-E10 LED-Birne. Gedruckt, Mat: PLA (PETG, ABS oder PC, auch denkbar) Das Teil wird mit einer möglichst hellen, weißen 5mm LED bestückt Auf Polung achten! Füllung 100% Getestet, funktioniert
Replication of a crokinole board with a model that can be used as an ornament. Printed on MINI with multiple filament changes. Print file includes filament swaps.
Created this both to mount the 4 standing boxes to my wall and the center box is hanging below the TV board with my beamer.
This Crokinole disk holder is made with friction fit cap which can be twisted to open slot for dispensing disks, one at a time, during game play. Cap can be easily removed to fill container with disks. Easy to print with PLA or PETG 0.2…
