75 models
100x100 mm lithophane picture frame backlit by a Halvklart Spotlight What you need Printed parts (base, cover, button) Halvklart USB LED spolight 100x100 mm lithophane How to print your own lithophane Also, look under the section “Photos…
Print approx. €0.35–€0.43 excl. taxPreliminary estimate for one variant
To bring some light into my 3D Printer enclosure, I printed these sockets to hold IKEA's HALVKLART LED-Spotlights in there. I added a visor to avoid looking directly into the lamps when inspecting my prints. Printing: Per Lamp you have to…
Print approx. €1.15–€1.40 excl. taxPreliminary estimate for one variant
Non c'è molto da dire... per montarlo serve una vite M4x30 MATERIALE: ECO-SMART PRINTOLOGIST
Print approx. €1.77–€2.17 excl. taxPreliminary estimate for PETGSource material: PET
This model is for affixing a bottle cap bin to the top of the door handle on a Klarstein 201L Beer Fridge . Holes for the bottle opener were drilled and tapped, and the opener installed seperately. This model is only for the cap bin. The…
Print approx. €1.19–€1.46 excl. taxPreliminary estimate for one variant
Here is the XXL-version of the diffuser for the Klarus XT21X flashligt. :-) Handy when you need to turn all that concentrated lightbeam to the surroundings. Perfect on the kitchentable during that poweroutage, in the garage or on that…
Print approx. €8.33–€10.18 excl. taxPreliminary estimate for one variant
With this thing you can connect an exhaust air hose with ID = 150 mm to a Klarstein AireLux. The clip is optional. I attached it to our adapter with hot glue, but it also works perfectly without the clip. See also our wall mount:…
Print approx. €0.12–€0.14 excl. taxPreliminary estimate for PETGSource material: PET
This is a funnel for the Klarstein Amazonia Mini dishwasher (also known as Moulinex Studio MINID2SL ). I remixed the funnel's base dimensions of https://www.thingiverse.com/thing:4745580 with a wider opening. Print settings on my Prusa i3…
Print approx. €16.34–€19.97 excl. taxPreliminary estimate for one variant
This is a flashlightstand for the Klarus XT21X model if you ever need. It is a litle hard to get the flashlight to stand up right when needed. It is used in combination with the Klarus diffuser that you can find here. The Footstand is…
Print approx. €1.08–€1.31 excl. taxPreliminary estimate for one variant
Here is the diffuser for the Klarus XT21X flashligt. Handy when you need to turna all that concentrated lightbeam to the surroundings. Perfect on the kitchentable during that poweroutage together with the Klarus Fottstand that you can…
Print approx. €2.51–€3.07 excl. taxPreliminary estimate for one variant
Minimalist IKEA Halvklart LED mount for Prusa Mini. Printing time from 20 to 30 minutes depending on the settings. No additional fasteners are required, you just need to remove the protection from the adhesive layer of the lamp and stick…
Print approx. €0.44–€0.54 excl. taxPreliminary estimate for one variant
Mounts the Ikea HALVKLART lights to the top corners of a Prusa Lack Enclosure using the included adhesive back. V1: Top surfaces, when mounted, were a bit sharp, and if you don't have very short screws, you can't use this. V2: Offset…
Print approx. €0.77–€0.94 excl. taxPreliminary estimate for PETGSource material: PET
This model extends the shelves of the Klarstein frides by 5mm, exactly the same length of the ledge they normally sit on. That means, if the shelves start to slip off the ledges of the fridge, these extensions will fit perfectly, and keep…
Print approx. €1.32–€1.62 excl. taxPreliminary estimate for PETGSource material: PET
Die Klarheit des Originals lässt zu wünschen übrig. Zusätzlich wird das glasklare Filament, das selten benutzt wird, eingespart. Der Rahmen wird in der Wunschfarbe in PLA gedruckt und erhält eine zugeschnittene starre Klarsicht-Folie mit…
Print approx. €0.46–€0.56 excl. taxPreliminary estimate for one variant
Kezdő vagyok! Nemtudom miért vannak a 3D-s nézeten csíkok, a termék tiszta.
Print approx. €1.30–€1.58 excl. taxPreliminary estimate for PETGSource material: PET
1.- Introduction This puzzle was introduced by David A. Klarner in the early 70s. The legend says that he gave a Christmas quest to students when he was visiting professor at Utrecht University. His quest consisted in writing a computer…
I broke the opening handle of my refrigerator. I couldn't find a spare part, so i build a new one. Maybe someone can need it ;D The model of the refrigerator is or some others. Klarstein Cool Cousin (HEA9-C.Cousin) (80L) The original…
Replacement for the hose connector of a Klarstein Kraftwerk AC unit. Fits 150mm hoses just as the OEM part. Do to the high temperature at the exhaust, please do not use PLA but at least PETG or another heat resistant material. Printed…
Little cheap led usb lamp, when you just need a little more light on your (home) office desk. It is small enough to not be in the way. It has a glare free angle so easy for your eyes. It has a large on/off button and a cable pin for a…
Modeled this to better connect an insulated air hose, instead of the standard air hose, to the hot air outlet. The threads are mostly there to add some grip, I have fastened it with some tyraps. It gets hot enough that PLA will deform, so…
Klara is an elegant and modern lampshade designed for E14 bulbs and printable in vase mode. With its vertically ribbed design, it diffuses light softly and warmly, creating a cozy atmosphere. For optimal printing, set layers to 0.2 and 6…
This is a remix of Baleks “Offset funnel for Klarstein Amazonia Mini dishwasher”: https://www.thingiverse.com/thing:4745580/ This is basically just a longer version of the original, since my machine stands below a longer cupboard. It will…
This mount is designed for the left front corner of a Voron 2.4. It is suitable for the Halvklart / KAPPLAKE LED from Ikea. Printed everything with the usual Voron settings. As a negative volume, the Voron logo was added , modified and…
Portafilter inside diameter is 51mm. Alongside Klarstein Espressionata Gusto and Swan Retro I saw also Oster Nova PrimaLatte and Gevi being mentioned (could be of the same family of espresso machines, but can't confirm, mine is from…
Adapter plate for Klarstein New Breeze (10032511) AC and for the New Breeze 9. no support needed. Print with PETG or other high temperature filaments. PLA will maybe melt or get soft because the exhaust air can be up to 50°
This is a copy of the Time-to-Change magazine follower, aka Maklarbak magazine. The idea of this forgotten tech is that the follower will lock the bolt open before the last round is fed, you then drop the bolt and reload with peace in…
Transform your indoor garden with GRIDFINITY Seedling Grow Light, designed to work seamlessly with IKEA’s HALVKLART and KAPPLAKE Lights. This 3D printable model is the perfect solution for growing seedlings indoors while keeping it…
Adapter for Klarstein food dehydrator to use for drying filament spools. It is also compatible with other food dehydrators with the same rings (a lot). Print with a temperature resistant filament like PETG, ABS, ASA…
I-Dog adapter for Ikea Halvklart, since the Ikea Ledberg is not available any longer. Just print the I-Dog and this adapter, in my case it holds together nicely but otherwise it can be glued also.
A very simple zip tie holder for Ikea halvklart LED.
A remix of my webcam holder that mounts to the X carriage that will hold an IKEA Halvklart LED lamp on the right side of your Ender 3 v2. I find that this angle is ideal to light the print bed when my webcam is on the right hand side of…
Suitable for FFF or SLA It is suitable to use double-sided adhesive tape for wall mounting.
This is my solution for lighting up my office desk. It uses a simple Halvklart light from ikea, and may work with the new design. I added a switchable USB hub to my desk to turn the lights on easily. I gave the lights a long tail in hopes…
This thing connects the exhaust hose from our Klarstein AireLux AC to a 150 mm ID hose. I printed this with PETG. The threads for the AC hose need supports, and they are nasty to remove. See also: https://www.printables.com/model/1354997…
Simple holder for this specific Klarus battery charger. There's a hole at the bottom to use the USB input and output. The charger fits snugly while the inserts are a bit tight. Everything shouldn't move so you can easily add and remove…
Dieses LWL Kabelbeschriftungsschild besteht aus zwei Teilen und wird mit einem P-Touch Beschriftungsgerät beschriftet. Es wurde entwickelt, um eine gut lesbare Beschriftung zu ermöglichen – auch für Menschen mit eingeschränktem…
Spotify keychain - Playlist KlareKante Rock
This is a tray for a Klarstein ice machine. Category: Replacement Parts
Here's a funnel attachment that fits directly onto the Klarstein Amazonia mini dishwasher. That's all there is to it! :)
Klarstein wonderwall heater remote holder
I would like to share my experimental holder for KLARK TEKNIK MIC BOOSTER CM-1. It is prepared for two small screws (2,5 milimeters diameter) (https://www.klarkteknik.com/product.html?modelCode=0838-AAT)
Yüzüklerin Efendisi Hobit Çoçukları
A slim diffusor for the Klarus G15 flashlight. Use a transparent PLA. I also tried with black PLA on the bottom part, I thought it looks better, but does not affect the functionality. .20 layer height and supports is recommended, rounded…
Replacment of factory quality issue with Klarstein box. Too weak plastic. It has broken in both of our boxes. With the first one we were lucky and got new improved design. With the second one there were no new products already :-( See…
A simple clip-on protection for the Klarus G15 flashlight to prevent pressing the button when the flashlight is in a pocket or a bag.
Wlasny model z odwzorowaniem oryginalu rozmiary 1:1 Pogrubiona zostala konstrukcja na calej dlugosci regulacji
Yüzüklerin Efendisi Ent Çoçukları
Yüzüklerin Efendisi Cüce Çoçukları
No special settings, I needed to print the L with a healthy brim to keep it from curling. I made the bushing thing with a slot so you could slide it in without dismantling the damn thing, but in my case it was too much of a hassle to…
Yüzüklerin Efendisi At Lort'ları Çoçukları
These are replacement parts for the Klarstein ice machine. Print Instructions: Material - TPU Walls - 2 at 0.4mm Top bottom layers - 3 at 0.2mm Infill 8% gyroid Both should be press fit. If you need them stiffer then print more walls /…
Yüzüklerin Efendisi Elf Çoçukları
Yüzüklerin Efendisi Kral Soyu Çocukları
Whether you are pouring a thick, dark glass of vintage Kanar or unwinding with a cup of hot red leaf tea, your surfaces deserve the unyielding order and discipline of the Cardassian Union. Presenting the Reklar coaster—a striking piece of…
My wife didn't have the strength to move it, so I came up with the idea of attaching wheels to the Klarta Store 2 air. Printed on a 0.28 layer with three strokes and 25% infill. You need to print the right and left (they differ in the…
Eine Klemme zum Personalisieren deiner IKEA 365+ Gläser. Wer kennt es nicht; auf dem Tisch stehen 5 benutzte Gläser und es ist nicht mehr nachvollziehbar welches Glas zu wem gehört. Auftritt: der Trinkglaserkenner!!1 Einfach ein paar…
As usual - does what it says on the label :-) You will need two of the M2.5 Skadis T-Nuts by @6d6178 and two M2.5 DIN912 screws for mounting the holder.
Yüzüklerin Efendisi Doğulu Çocuklar
Yüzüklerin Efendisi Khandlı Çocuklar
Yağmur Damlacıkları Litophane
Yüzüklerin Efendisi Haradrim Çocukları
Yüzüklerin Efendisi Org Çocukları
Modèle compatible : Klarstein Max Breeze Smart 15000 Rehausseur à fixer entre le bas du climatiseur et les roulettes pour le rehausser de 54mm. Utilité : Rehausser le bouchon de vidange
Model should be printed on the side just to overcome the layer adhesion issue. I have printed mine from PA6GF with 4 walls and 40% infill and it does bend less then the original one. To change the handle you need to partially disassemble…
This is a door gasket for the Klarstein Amazonia 8 Tabletop Dishwasher. Its printed in TPU 95A and keeps an almost perfect seal. The guys i printed it for told of a few drops each washing cycle, nothing a towel below the dishwaser cant…
Well, what else is there to say. It's a holder. It holds a bottle of “KlarPilot” anti-fog spray. You will need one M2.5 Skadis T-Nut by @6d6178 and one M2.5 screw (I use DIN912 ones).
Modèle compatible : Klarstein Max Breeze Smart 15000 Utilité : Bloquer le réservoir d'eau lorsque le cache de base n'est pas utilisé (par exemple lorsque le rehausseur de flotteur est utilisé) : Requis : Nécessite 4 vis à insérer dans les…
Modèle compatible : Klarstein Max Breeze Smart 15000 Utilité : Surélève le flotteur du réservoir d'eau afin d'avoir un débit d'eau suffisant pour refroidir le climatiseur. Requis : Nécessite d'utiliser le bloqueur de réservoir car le…
The lid of Klarstein aurora. It is 15cm. Closes very good, modified to be tight fit, so it doesn't vibrate or make noise.
This mount is designed for the left front corner of a Voron 2.4. It is suitable for the Halvklart / KAPPLAKE LED from Ikea. Printed everything with the usual Voron settings. As a negative volume, the Voron logo was added , modified and…
The lid of Klarstein aurora. It is 15cm. Closes very good, modified to be tight fit, so it doesn't vibrate or make noise.
Adapter for Klarstein food dehydrator to use for drying filament spools. It is also compatible with other food dehydrators with the same rings (a lot). Print with a temperature resistant filament like PETG, ABS, ASA…
Adapter plate for Klarstein New Breeze (10032511) AC and for the New Breeze 9. no support needed. Print with PETG or other high temperature filaments. PLA will maybe melt or get soft because the exhaust air can be up to 50°
Klara and Svarog from Honkai Star Rail. STL file with separated parts (with key to connect together)
