453 models
We are thrilled to announce the release of our successor to KLAMMA, the culmination of countless hours of design work and dedication. This new version represents a significant milestone in our journey, building on the strong foundation…
Please don't forget to like - I want my Prusameters! 😄 If you update from a previous 3.x beta, make sure to read the Release Notes, contained in the download. If you update from an 2.x release, please read the Setup Guide, contained in…
Please don't forget to like - I want my Prusameters! 😄 What's new? New Process Preset: 50mms FINE , prints with 0.10 mm layer height. All first layer speeds set to 40mm/s , to make the presets work universal out of the box. If everything…
Use Calibration Bro to calibrate your printers X & Y E-steps, and Skew. Its a free alternative to the Califlower and/or Calilantern. Print Calibration Bro. Wait for it to cool down! Don't compromise the shape by removing it while hot &…
Activate firmware retraction in your slicer. Activate firmware retraction in klipper by adding this to you printer.cfg : [firmware_retraction] retract_length: 0.8 retract_speed: 60 unretract_extra_length: 0 unretract_speed: 60 Slice the…
I prefer this model better than the original. Lightweight, fast, & easier to read. Print: 1 Bottom layer 0.2mm layer height 1 Perimeter 0 Top layer 0 Infill Set all speeds to 100mm/s, except the first layer speed. Use your default value.…
A standalone download for the Klipper ringing tower so that one doesn't have to download the entire Klipper zip file.
Welcome to the Low Rider MMU. This Project has now been superseded by V2 ###### Please post your Makes ###### Please like this, download and post the make if you built it It helps us makers with feedback and gets us some Prusa meters as…
UPDATE The camera mount was working but when there were fast short movements with many direction changes it started to wobble. I added a V2, it doesnt look as nice but it is more stable. If you are into timelapse videos then you…
Rename all configs from .ini to .cfg ← Configs Rename Robin_nano.ini to Robin_nano.bin ← firmware Check the ReadMe.txt for more info Category: 3D Printers Comes from: https://github.com/nehilo/Klipper_KP3S
Welcome to the Low Rider MMU V2.0 ###### Please post your Makes ###### Please like this, download and post the make if you built it It helps us makers with feedback and gets us some Prusa meters as most people don't pay it forward Feel…
The CheaPad : the most affordable DIY Klipper Pad ! Let me introduce The CheaPad, an incredibly cost-efficient alternative to all the Klipper pads out there! 🚀 I'm excited to share this minimalist yet highly functional solution for 3D…
The main model here is a reverse bowden and cable support bracket, which is needed to make the KP5L capable of printing reliably. The printer as-shipped makes no accommodation for the filament path between the runout sensor and extruder,…
Have you noticed, that the printer is not working as expected? You can move the printhead without homing and it might crash somewhere. you can also move the base and its crashing if you reach the top. The reason is a not well programmed…
Cable duct for Voron V0.1 or V0.2 that houses the Klipper Expander. Klipper Expander allows you to add additional functionality to your V0 / V0.1 when using an SKR Mini or SKR Pio board. I'm currently using it for another NeoPixel plug…
Beautifully designed Klipper Expander Mount for the Voron V0.2, it replaces the Rear_Skirt_x1.stl to allow you to mount your klipper expander without taking up useful space in the MCU bay. This is especially useful for users who are using…
Did a quick OpenSCAD script to generate a simple pressure advance calibration tower for Klipper firmware. I had to add a part of a cylinder at the back as Prusa Slicer 2.5.0 doesn't place the seam in the middle when you choose “back”. So…
Elegoo Neptune 3 Pro Klipper Upgrade This page contains instructions for installing Klipper on your stock Elegoo Neptune 3 Pro and model to attach BTT Pi V1.2 inside printer's bottom housing. I wrote this instruction after upgrading my…
I designed my own case for Klipper / Klipperscreen with the following components: Raspberry Pi 4B OSOYOO 5" DSI touchscreen Geekpi Raspberry PI Aluminum Heatsink 4x M3 16mm flat head screws 2x M3 16-12mm button head screws 2x M2.5 screws…
Hi, this profile works perfectly for my printer and I get really good quality prints. Make sure you calibrate yours and double check my settings for compatibility issues according to your mods or others. Check my other CR10 Smart Pro…
Drei einfache Kabelhalterungen zum Kleben oder Anschrauben. Bietet Platz für mind. 3 Strom und diverse dünnere Kabel. _________ Three simple cable holders for gluing or screwing on. Provides space for at least 3 power and various thinner…
…Please be sure to hit like & post a make, I'd love to see your prints! UPDATE: Model for BTT TFT50 PI SCREEN V2.1 ADDED!! LATEST VERSION!! IMPORTANT NOTE!!! The newer V2.1 screens have 3 buttons instead of a switch & brightness wheel.…
I love the Knomi V2, the added features are very useful. However, I will never put it on my printhead. So I wanted to make it more versatile allowing anyone using Klipper to use it in a meaningful way. That's how this project started. Why…
UPDATES 2025.08.08: Testing v2 Troubleshooting the problem with PID config (removed control = pid from [extruder] section) Fixed problem with position_endstop error (changed position_min in [stepper_z] section to -3.5) Improved clarity of…
Case for raspberry pi 4 with 5 inch display for Klipper. The design revolves around the display: CUQI brand 5 inch DSI touch display from amazon . I am using this display since a couple of days with a Klipper installation. This is not a…
Adapter used to mount a Klipper Expander board to a standard DIN rail. Useful for voron 3d printers in particular. Print using supports on the two overhanging tabs
I saw TT's video about this display and the CYD Klipper project and immediately thought about how it would be neat to have a battery powered version that I could carry around with me in the workshop as I go from machine to machine. Thus…
Better print with the angles that I set up. M2.5x5 for the Pi, M3x5 for the screen.
Anycubic Vyper PEI ADXL345 Y-Mount Mount for KUSBA ADXL345 and ADXL345
For one of the most common generic type of ADXL345, see picture (15mm screw hole distance and about 20x16mm PCB dimensions) Print the M3x4 or M3x6 model, once the print is done, set the bed to stay hot (don't let it cool too much or…
Edit 30 Jun 22 - Tightened tolerances for heatset insert holes for both E5/Pro and E5 Plus models. Reduced diameter from 5mm to 4.7mm. Edit 17 Oct 22 - Added mirrored versions for the Ender 5/Pro version for users who have done a dual Z…
This macro automates the heating delay time for large print beds, making it ideal for 3D printers with significant bed sizes. It intelligently adjusts the delay based on the actual bed temperature and the target temperature, ensuring…
Print with PLA on a flat side without supports, so it looks like an L from above. Use M3 or similar screws to mount the accelerometer to the part and itself to the extruder (check picture 1)
The tablet i was using to control my Klipper system died. I picked up a 7 inch Waveshare LCD on amazon, linked below, and built a mount to attach it to my printer enclosure. https://www.amazon.com/dp/B096KL11X8
This is my take on a case for an RPI 3B+ attached to a BTT TFT50 v2.1 screen with ventilation and access to the screen buttons. Useful for a remote klipper screen install, Homeassistant dashboards or anything a little touchscreen computer…
My changes: closed SD card slot, widened USB access hole for USB-C Printing instructions: PLA or PETG is OK pictured is 0,2mm layer height NO SUPPORTS needed Version history: v1.0 5.4.2024 initial release
Mit meinen Beutelclipp kannst du schnell und problemlos angebrochene Beutel verschließen und wieder öffnen.Mit meinen Beutelclipp kannst du schnell und problemlos angebrochene Beutel verschließen und wieder öffnen.
INFO My Neptune 3 Pro configuration files. It consists of multiple files, some have essential macros, some have macros to make it more userfriendly and there's a central file with variables to control most macros. My hardware: Skr 1.4…
Slicer settings: Vase mode 1 botom layer or brim 0.2 layer height max speed: 100mm/s Prepare for the test by issuing the following G-Code command: SET_VELOCITY_LIMIT SQUARE_CORNER_VELOCITY=1 ACCEL=500 This command makes the nozzle travel…
case for 7 inch 1024x600 IPS touchscreen and raspberry pi 4. case uses m2 screws to hold everything together.
Hi, this profile works perfectly for my printer and I get really good quality prints. Make sure you calibrate yours and double check my settings for compatibility issues according to your mods or others. Check my other CR10 Smart Pro…
EDIT: Initially this was just aimed at the Micron+, but I have added parts to make it more robust. There are now 2 varieties of 2020 mount (front face of rail, and bottom face of rail). There is a variant of the case that has a cutout for…
If you want to support my work, just buy me a coffee: paypal.me/predypavlovic A housing that protects the Klipper Expander circuit board For mounting outside the printer, e.g. on an aluminum profile BOM M3 heated inserts (2x) M3x6 screws…
Klipper expander mount to with vhb or screwing it to your extrusions. remixed to use 2 m3x6-8 for securing the expander
A raspberry pi + screen mount on the Ender 3. It attaches to the front of the 4040 extrusion using existing fasteners. Required fasteners: 2x M5x8 - attaches mount to extrusion 4x M2.5x4 - attaches pi to mount The example shown is using…
WARNING Use flush cutters to cut out a piece of the “Cover” that presses against the SD Card. When modelling this i did not account for the SD Card protuding, so the cover will press against it and that can break the SD Card Slot.…
The CR-10 Smart has its issues. But after a bunch of tinkering and fixing, I was able to eke out a reliable printer with a nice sized build plate. Specifically, I added a MicroSwiss hot-end , pretty much tightened every screw, and…
Wanted to mount raspberry pi outside the printer, at least until I design a board with IO openings (board itself could be housed inside but wifi adapter has to be outside and it would be nice to have access to LAN/USB ports from the…
This is my edited version of neopixel script that is making automatic Neopixel led bargraph. Original author is “digitalninja-ro”, i have rewritten parts of scripts, so now it is working in automatic mode. When printer is in IDLE,…
A mounting bracket for the Klipper Screen ADXL sensor to the extruder stepper motor. Requires 2× countersunk M3×20 screws to replace two of the the stock stepper motor screws. This works specifically with the sensor included with Sovol…
This is an improved version of the Nozzle Cleaner for the Ender 3 V3 SE (A1/A1 mini combs) , optimized for easier use and compatibility with Klipper firmware. This cleaner works efficiently with silicone combs to maintain a clean nozzle…
I wanted to print this clip without support, so I added chamfers where necessary and closed the opening.
This is WIP! I'll post more links and instructions soon. this case was designed to for my raspberry pi 4 and Osoyoo 5 inch screen to my Creality ender S1 printer (on the front left side) to run Klipper with Klipperscreen on it. Buy me a…
I needed a case to fit the BigTreeTech PiTFT50 v 2.1. There are several cases out there for prior versions of the screen, but I couldn't find one to fit the latest version that I liked. There are a couple of key differences in v2.1 versus…
Klipper AIO Console For SKR3EZ ****10.11.2023 Updated Bracket For TFT50 and Corrected the Orientation, Please Re-Download**** ****10.13.2023 Updated Bezel and front shell (Added notch for TFT50's ribbon cable)**** ****10.30.2023 Updated…
Anycubic i3 Mega S mods This is a collection of mods of the Anycubic Mega S 3D printer. Feel free to experiment with them! Files are on GitHub! This collection contains 3D models and configuration files made by different people (all…
This is a remix of the Klipper Pressure Advance Tower by davorin. I liked their OpenSCAD tower, but made my own customization to allow for indents on every level. This is achieved by a simple subtraction using the difference() method in…
The excellent locking cable clip by @bequ3 was missing a mounting base for 3M VHB tape, which is my favorite for mounting things screwless. I thought some other people might need it too, so I have shared it for your convenience.
WARNING: Disconnect your printer from AC power before proceeding. Death or serious injury may result from attempting to work on your printer while it is plugged into AC power. How to install a chamber heater the safe way My main gold is…
This is a ADXL345 hotend mount for the Anycubic Vyper to make use of Klipper's Input Shaping automatic calibration. The Vyper seems to have a unique positioning for the hotend, and I couldn't find anything to fit it, so I'm uploading what…
This is a cooler for Sovol Klipper Screen on Sovol SV07 Plus. I dont have any personal experience with non plus SV07 but I do believe the screen and the mount is the same. This model uses the original mount and is connected to the fan…
Benefits of this design: 1. ADXL components protected from shorting against mounting bolts' heads & nuts. 2. ADXL components protected by walls from shorting against filament knob. 3. ADXL securely sandwiched in place giving it a very…
These connectors allow you to use the excellent kliptt cable holders https://www.printables.com/model/424351-klippt-locking-cable-clip with your multiboard.
print settings: PLA works fine! Happy printing :)!
Bei der Text datei einfach .txt gegen cfg tauschen. Die Laser config hab ich noch nicht getestet und kann darum nur vermuten das sie funktioniert .(der richtige pin fehlt auch noch)
Consider tipping me 100g of filament for prototyping if I've saved you some time :) really appreciated You know you printer has 2 heated bed zones right? Let's make it work with OrcaSlicer automatically! Guide [ If you haven't created a…
Snap-in mount for klipper expander designed for Voron 0, and probably most 1515 beam. No preloaded nuts required. I found that all mounts reuired nuts and were blocking access to part of compratment. So i designed it to have klipper…
WARNING : This Upgrade requires you to basically gut your printer and rebuild the electronics from scratch. As such, it is recomended for Advanced 3D Printer Users with some electronics skills only. If you would like to keep your OEM…
I had a couple of scripts installed so don't just copy paste. Use it to compare your settings and mine and fine tune them. My printer works very well like this!
Neatly organize the individual cable strands that span between the back of your CM Qube 500 and a ( height adjustable) desk. Every single time when I found the endurance to finalize a fixed cable management solution for my setup, It…
UPDATES 26.07.2025: Added a Klipper macro for the nozzle brush and a version for the Neptune 4. INFO A nozzle brush holder that mounts to the metal plate under the heated bed. There are three versions: One for 10mm plastic spacers…
Screws that you need: 4x M3x10; 4x M3x15; 4x M3 Nuts; I have printed with PETG, but also PLA is good.
have installed klipper in a semi original CR-10, this is what I changed in my CR-10: extruder (the dual gear red that you can find on amazon) the bed, the PEI bendable that you can get everywhere an all metal hot-end clone I have…
Ich habe einem Kumpel einen Displayhalter für den X1 gecaddet und dachte es wäre zu schade wenn nur ein Mensch auf der Welt dieses Model hat. Sicherlich kann sich noch jemand daran erfreuen. Leider lag die Datei jetzt über ein Jahr in…
Hey All, if you cheap like me and didn't want to pay the $200 for sonic pad and opted to buy the $50 LCD screen off amazon then this is for you. this is the start of the project as I still need to design the back part but the front has…
Kabelhalter Klipp 2020 V-Profil 20 Ender Hier zwei Kabelhalter für 2020 V-Profile damit die Kabel geordnet am Drucker befestigt werden können Passend z.B. für Ender 5 Für die Schraubvariante benötigt ihr noch eine passende Schraube mit…
…Please be sure to hit like & post a make, I'd love to see your prints! Turn your Rasberry Pi equipped printer into a solid state machine! These drives are faster & more reliable than any SD card which have a very limited times they can…
Swap out the very limited Stock touchscreen & UI for full Klipperscreen & make your printer look sleek AF! EDIT: Suits v1.0 & v1.1 screens only! UPDATED version on the way for v1.2 screens! BOM 4x M3 Heat inserts Voron Spec! 4x M3 6-8MM…
Hi, this profile works perfectly for my printer and I get really good quality prints. Make sure you calibrate yours and double check my settings for compatibility issues according to your mods or others. Check my other CR10 Smart Pro…
Profiles for the Sovol Zero in OrcaSlicer, PrusaSlicer and SuperSlicer, generated from one source so all three slicers ask for the same speeds and accelerations. An optional Klipper macro pack adds bed boost for the chamber preheat, a…
A mount for a Raspberry Pi to replace the default screen and mount on the Elegoo Neptune 3 Plus - for those using Klipper. It might fit other Neptune 3 variants, I am not sure. I used a Raspberry Pi 4, but the mounting holes are in the…
This is an adjustable shell for the Seleadlab Klipper Camera USB CAM 130° 2MP 1080P camera sold on Aliexpress (https://www.aliexpress.us/item/3256806655761594.html). The enclosure is specifically designed for this camera. Three locating…
Da ich die Camera auf den obersten Profil vom Drucker montiert habe machte ich diese Klipps um das Kabel am Gerät zu befestigen (Bringt auch ein bisschen Farbe ins Spiel für die Optik). Gemacht wurde es für den Artillery Sidewinder X4…
WARNING: I am not responsable for any damage to your printer, check ALL the settings/configs and verify by yourself before printing, specially with klipper configs Sharing my OrcaSlicer settings for Anycubic Kobra Neo with Klipper…
The original project was “watering". My remix eliminated these flaws. Made, as per the original project with 25% infill. All merits go to the original project of dalpek @ https://www.thingiverse.com/dalpek/designs who is the original…
This is a "KlipperScreen Box" for the Ender 2 Pro to replace the stock display. The box can be inserted and fixed to the printer's original mounting holes. The Raspberry Pi (2) Zero and the Raspberry Pi 3.5" LCD touchscreen are mounted…
CREALITY ENDER 6 UPGRADE LCD 5" IPS KLIPPERSCREEN 5inch Capacitive Touch Display for Raspberry Pi, DSI Interface, 800×480 https://www.waveshare.com/5inch-dsi-lcd.htm https://www.aliexpress.com/item/1005004930844232.html…
Hi this is a simple guide to use klipper on your super racer you only need a raspberry and a cable to connect it to the printer You must know what board in on your printer!! you can do that by open the top of the printer and looking to…
Hello. This case is designed to cover the electronics of the Raspberry Pi 3B+ when using the AliExpress 5 inch touch screen. This case only allows for the 4 USB ports and the USB power in. The display I am using is this one :…
I needed a simple way to mount the Klipper Expander board in my Voron v0.1 electronics bay, so I created this bracket to allow mounting it on any extrusion. Tested with 1515 extrusion but will work with any other that can accept M3…
Raspberry pi display (official) - 7 touchscreen Support for Flsun SR on Klipper For the mainboard spacer you can find'it here https://www.thingiverse.com/thing:4936100
Klipper's SCREWS_TILT_CALCULATE shows minutes to turn the screws. This gauge has a quarter hour on it and the hole has space for the allen-key to freely rotate.
This a Frame/Stand/Mount for a 3.5inch Waveshare GPIO Screen on PiZero 2 which can be clipped directly in the original LCD place or used as serperate stand. The Pi is powered from LM2596S stepdown converter placed on PSU. You need 3x M3x6…
Multiboard created a cross piece for Klippt using this piece with multipoint to use Klippt on their board. I am using OpenGrid and I wanted to use Klippt, so I made these pieces. David D already has multiboard compatibility snaps, but not…
No print support needed Screw and heat inserts are totally optional for the actual case and even screen , this can hold on it's own as is, just sliding the pieces together, and screen can just rest there (as long as there is no risk of it…
A simple mount to bolt the klipper expander board to your aluminum extrusion. Updated the design so the board can be press fitted in the mount, no heat inserts needed! You’ll need: 2x M3x8mm 2x M3 t-nuts OPTIONAL: 2x M3 heat insert…
take hotglue to mount it
Use a Klipper macro to fully automate nozzle cleaning with this parametric mount for 2020 extrusion and a brass brush. I have modeled for a specific brass brush (link at the bottom) but you can edit the f3d file to use any brush…
Klipperised my mini, still having some dramas getting a decent bed mesh with defined bad spots for the magnet locations, designed this spiral with concentric chamfers so it has no little spots to extrude on and takes a nice path, when…
![Sewing machine spool & bobbin clip {Fadenrollen Klipp} [V2] (size:= M; L) // more powerful inner clip effekt](https://media.printables.com/media/prints/900668/images/6887835_da70503f-32a6-473b-9e4c-5a68c096e3aa_526eaf59-464b-4738-b9ee-614b38f723b5/2024-06-02_23h26_07.png)
