Counting matching models…
Intro: These are adapters to mount the Simagic P-HPR (Haptic Pedals Reactor) for the Heusinkveld Sprint Pedals . All 3 pedals (clutch, brake, accelerator) are included. Models: You will notice that there are 2 models per pedal, labeled…
Found this online thought was funny and came out really clean so thought would share, link to the creator and other models here. https://cults3d.com/en/users/MPPrints/3d-models
Additional parts needed: 4 M3x12mm screws (a little bit shorter or longer should also work) Print the mount and 2x each washer. Use 3 perimeters and 25% infill. Then mount the reactor the mount first with the included M4 screws. After…
Attaches to the nut on the top bolts for each pedal. These attach using the screws that come with the TT25. Print in the orientation they are saved in and use supports. Recommend you print with enough walls that the mount part for the…
There seemed to be no free Simagic HPR adapters for the Heusinkveld Ultimate+ pedals, so I made my own. One model for brake and throttle, separate model for clutch. Designed for M5 Ruthex inserts . Run a long M5 screw through the part…
General notes about the model This is an adapter for mounting a Dayton Audio TT-25 “puck” bass shaker to the back of Heusinkveld Ultimate Plus pedals. It should work on any of the pedals, but I only tried the accelerator and brake. The…
Just some small tweaks to these incredible adapters to make for easier printing and assembly. Printed in Jessie Elixir PLA on a MK4S.
Edit: 8/21/2022 Added USB plug support with zip tie slots. I wanted to secure the HE smart control to the back of my inverted pedal deck and the bolt pattern on the Smart control does not match 40 series profile, so I made this. It has…
I was not happy with the softest set of elastomers that came with my Simsonn Plus X pedal set, so I designed a softer set for use with socks. I printed them in Creality CR-TPU (95A shore hardness) with 20% gyroid infill. Adjust the infill…
Created a version of the Heusinkveld Sim Handbrake V2 grips with finger cutouts. Also made some extended versions ranging from one to four inches longer than stock. Print in the default orientation with supports on the unsupported…
Mount for the heusinkveld handbrake on 40mm aluminium profile using M8 screws. Hardware 2xM8 screws for profile 2xM8 T-nuts for profile 4x M6x20 screws 4x M6 nuts (4/8x 6mm washers) *Sorry for image orientation, I don't know what my phone…
Printed with PLA. Use supports on the Spring Adapter stl. I recently upgraded my Simjack UT pedals using the Heusinkveld Ultimate+ Upgrade Kit ordered from Trakracer in Canada. After placing my order, I realized additional hardware was…
i resin printed this model, then glued in 4 5x2mm round magnets. but should be able to fdm print it also.
Gives the original box from Dropoff510 15mm more of clearance. The box is a bit thicker to use 6x3mm disc magnets.
Bracket for mounting a Heusinkveld Sprint Baseplate to the pedal base of a Playseat Challenger rig. Materials A complete pack of 4 brackets requires the following new materials: 8x M6x35 bolt (socket head cap) 8x M6 washer [optional] 8x…
Heusinkveld V2 Handbrake support for the Playseat Challenge, following the long chain of remixes from jeoje's original design . This won't mount on its own, but rather requires this support system. The version I use, and I designed…
Shim for fitting Heusinkveld Sprint Pedals to 8040 Extrusion. I printed this in normal PLA as a test and its still fine with no noise or flex. I have not felt the need to print it in carbon reinforced anything or ABS.
This is a twist clip for a RJ9 extension cable. It's required if you want to space your Heusinkveld pedals further than the stock cable allows. Aliexpress RJ9 extension * Supports required (check image for details)
Mounting bracket for load cell/usb interface (Heusinkveld ultimate racing simulation pedals) to Trak Racer 160 pedal plate. Mount this ... https://heusinkveld.com/wp-content/uploads/AA_PCBhuis.jpg to to this ...…
My Simetik K2 pedal mounting plate does not have any holes to adapt the latest revision of the Heunsinkveld Sprint Pedal Plate (Old revision is 104mm hole spacing while latest revision is 110mm). So I decide to make a hole template in…
If you have Heusingkveld Sprint Pedals and want real ABS feeling, you can get it quite low cost. It's for this bass shaker https://amzn.to/3RGYA0O * to be mounted it needs 6 pcs M8x30 ISO 4762 Bolt 2 pcs M8x45 ISO 4762 Bolt 8 pcs M8 Nut…
Haptic Mount for Heusinkveld Ultimate (Simagic HPR / P-HPR GT Linear) Mount designed to install Simagic HPR and P-HPR GT Linear haptic devices on Heusinkveld Ultimate pedals, positioning the haptic as close as possible to the foot to…
A remix of the Heusinkveld Sprint Accessory/Tool Holder. I really liked the design so I remixed it to work for the handbrake. Category: Tool Holders & Boxes
Use Dayton BDS Exciters on your Heusinkveld Sprint Pedals. Use the IMS adapter that came with the exciters. Extra Hardware Required (per pedal): M2.5x12mm screws/washers (2x) https://amzn.to/3Ikf2A2 M4x25mm Countersunk Bolt (1x)…
This part (specially the brake) have to take quite high forces. Therefore I highly recommend to print it with Fibre reinforced filament (ie. PETG-CF or PA-CF). I finally used PA12-CF. Don't even think about PLA. 0.2 mm layer height 5…
A round grip for the Heusinkveld Handbrake and Magshift. Mounts with same hardware as the original grip so nothing is required beyond the printed grip. Same model works for both Handbrake and Magshift. Its smooth by default which is…
If you have Heusingkveld Sprint Pedals and want real ABS feeling, you can get it quite low cost. It's for this bass shaker https://amzn.to/3RGYA0O * to be mounted it needs 6 pcs M8x30 ISO 4762 Bolt 2 pcs M8x45 ISO 4762 Bolt 8 pcs M8 Nut…
____________________THIS IS A DIGITAL PRODUCT, STL FILES FOR 3D PRINTING_________________________________________NON-REFUNDABLE_______________________ Files to print Arkveld Cosplay Helmet from Monster Hunter. The supports required. Some…
Dual Rumble Motor Holder for Heusinkveld Sprint brake & throttle pedal Mount for the Heusinkveld Sprint sim racing brake & throttle pedals to mount 2 rumble motors each onto the pedals. Designed for the XBOX 360 Controller rumble motors…
