Counting matching models…
Update Oct. 14, 2022 : Missing files for 60 tooth gear added. These lathe change gears should fit most 7x10, 7x12, or 7x14 mini-lathes. These prints include all of the standard gears, plus some additional gears to make additional thread…
Print approx. €3.38–€4.13 excl. taxPreliminary estimate for one variant
Introduction A simple pair of magnetic holders for attaching flat bellows to a metal lathe as ways covering. I used this 5/8" tall flat bellows available from McMaster Carr: https://www.mcmaster.com/1320K111/ These bellows are made for…
Print approx. €2.13–€2.61 excl. taxPreliminary estimate for one variant
I found another (supposedly) M33*3,5 Thread lathe chuck holder on Printables that whas unnecessarily big and also had a wrong thread pitch. I did however like the idea and modelled my own. I prints in around 1h40min, PLA worked fine for…
Print approx. €1.25–€1.53 excl. taxPreliminary estimate for one variant
Tailstock Dieholder for Lathe.
Print approx. €2.56–€3.13 excl. taxPreliminary estimate for one variant
This Dial Indicator Holder fits to the Lathe Bed of my HBM 250 x 550 Profi Norton. Made for a Dial Indicator with 8mm axis. Additional Hardware: M6 x 50 Screw with Knob M6 Nut Small M3 Cap Screw
Print approx. €0.33–€0.41 excl. taxPreliminary estimate for PETGSource material: PET
This lathe change gears should fit most 9x10, 9x12, or 9x14 mini-lathes. This change gear makes it possible to cut metric threads on a lathe with an “imperial” (typically 16tpi) lead-screw. For details on using this gear, see this link:…
Print approx. €1.63–€1.99 excl. taxPreliminary estimate for one variant
I printed this in fillamentum PLA
Needed to get my new lathe tools off the countertop so they wouldn't bang into each other. Figured I had a huge peg wall in my shop so I used MGX 's peg board program…. https://www.prusaprinters.org/prints/34992-pegstr-pegboard-wizard…
Print approx. €2.18–€2.67 excl. taxPreliminary estimate for PETGSource material: PET
Needed to get my new lathe tools off the countertop so they wouldn't bang into each other. Figured I had a huge peg wall in my shop so I used MGX 's peg board program…. https://www.prusaprinters.org/prints/34992-pegstr-pegboard-wizard…
Print approx. €3.81–€4.66 excl. taxPreliminary estimate for PETGSource material: PET
This lathe spindle spider fits small lathes with a rear spindle thread of M27x1.5. This includes many 7x10/12/14 inch lathe models. Assembly There are 8 holes that need to be tapped M6x1.0 (the equivalent length ¼"X20 screws should work…
Print approx. €2.29–€2.80 excl. taxPreliminary estimate for PETGSource material: PET
Depth stops for a 5" (130mm) 3 jaw metal lathe chuck, specifically a Bison chuck. They might fit others. These stops help keep the work parallel at a specific distance from the face of the lathe chuck. I have included STL's for stops in…
Print approx. €1.08–€1.32 excl. taxPreliminary estimate for one variant
Mounting holes 5mm diameter, head 10mm diameter that are recessed 5mm. Distance 50mm. I printed mine in PETG 0.2mm layer height but any material and settings should work
Print approx. €3.61–€4.42 excl. taxPreliminary estimate for PETGSource material: PET
This lathe spindle spider fits small lathes with a rear spindle thread of M27x1.5. This includes many 9x20 inch lathe models. This is a modification of my 7x10 lathe design - resized to fit my 9x20 lathe. Assembly There are 8 holes that…
Print approx. €2.43–€2.97 excl. taxPreliminary estimate for PETGSource material: PET
This part is for quick adjustment of the height of the rotating chisel. You need the printed part, a 608 ball bearing, a steel round bar (must be turned to fit), and M5 bolts with nuts. Additionally you need a small spirit level, I use a…
Print approx. €3.56–€4.35 excl. taxPreliminary estimate for one variant
I like to split the bolts down the middle for increased strength. Using a flathead with a deep groove allowed me to easily install it in the shed. I'll do the same for the longer bolt too when I have the time. 6/24/25: Uploaded most…
Print approx. €0.42–€0.51 excl. taxPreliminary estimate for one variant
Many small lathes (such as my 9x20 lathe) have an internal Morse MT3 taper in the head-stock spindle. When using a center in this MT3 socket, it is very important that the socket is very clean to ensure maximum precision. This simple…
Print approx. €2.00–€2.44 excl. taxPreliminary estimate for one variant
Theses are gauges for easily set the support at usual angles. Make sure your printer is on the corner ! Print Settings Printer: Any Rafts: No Supports: No Resolution: 0,2mm Infill: 25% Notes: Verry simple to print. Make sure your printer…
Print approx. €0.57–€0.69 excl. taxPreliminary estimate for one variant
Jig for adjusting the Centerheight of Lathetools. You will will have to cut a rod and grind it to make it fit for the specific height of your lathe. Also used some small magnets. Which you have to clean carefully before using the Jig.
Print approx. €0.36–€0.44 excl. taxPreliminary estimate for PETGSource material: PET
This is a lathe spindle spider to hold long pieces of work on the outboard end of the spindle. Threads onto a 34mm x 1.5 spindle. You will need (4) 8mm x 1.25 bolts and nuts. The spindle spider is threaded for the 34mm x 1.5 but only has…
Print approx. €1.89–€2.31 excl. taxPreliminary estimate for PETGSource material: PET
This is a Spindlestop for a Lathe with 26mm Spindlebore. Extend it with M8 threaded Rod to the length thats needed. I added a 300mm Rod. For stabilisation you can screw one of the stops with M8 thread somewhere in the middle of the…
Print approx. €0.61–€0.75 excl. taxPreliminary estimate for PETGSource material: PET
To protect the lathebed of my Emco Maximat Super 11 a made a cover mainly from old leather (idea by Stefan Gotteswinter ). It uses two existing holes in the headstock casting and mounts on the DRO X-cover on the other side. I cut the…
Print approx. €0.77–€0.94 excl. taxPreliminary estimate for PETGSource material: PET
Die holder for lathe tail spindle with 22mm diameter and dies with 25mm diameter.
Print approx. €2.90–€3.55 excl. taxPreliminary estimate for one variant
Mount to stabilize the galvo-style LaserPecker 1 on a drill press Jacob's chuck. Easier to manage focal distance and avoid bumping the lightweight tripod it ships with. Optional “flex pad” model can be printed in TPU or another material…
Easy access to Quickfix holder, various holes for mounting options. Over head or fixed to a wall, or even on a shelf - everything is possible.
Print approx. €0.99–€1.21 excl. taxPreliminary estimate for PETGSource material: PET
Minimal through-bolted mount I designed for my Robust live center and ring drive center attachments… https://www.turnrobust.com/product/live Also fits similar ¾-10 centers by OneWay, Savanah, etc. The weight is on the through-bolt or wood…
Print approx. €0.70–€0.85 excl. taxPreliminary estimate for PETGSource material: PET
When I make the final print of this part I will be using PLA + CF and 100% infil for strength. This is a mechanical part for a metal cutting lathe “Atlas 10d” It should not see high stress but I do not want to take any chances. I did have…
Print approx. €8.47–€10.35 excl. taxPreliminary estimate for one variant
This is a replacement knob for the small levers on a Shoptask 1720 XMTC combo mill and lathe. It is modeled to be fairly close to the original knob, with a M6 X 1 internal thread. If slicing from the STL file, it would be best to rotate…
Print approx. €0.36–€0.44 excl. taxPreliminary estimate for one variant
Gridfinity Bin for 4 Lathe Tools SNR0010K11 S10K-SCLCR06 SCLCL1010E06 SSSCR0810D06
Print approx. €1.58–€1.93 excl. taxPreliminary estimate for PETGSource material: PET
Basic Tool caddie to keep the bits that come with it, with it :-) Fits using the stock bolts (the ones that would mount the extension bed). Probably better to print in PETG if your garage gets hot, but PLA is what I had…
Print approx. €2.41–€2.95 excl. taxPreliminary estimate for one variant
This is a case for all of my hooked lathe chisels. Das ist ein Gehäuse für alle meine Haken-Drehmeißel. Fits for/Passend für HOLEX 297145 16 HOLEX 297120 12 HOLEX 297120 10 HOLEX 297120 8 HOLEX 297120 6
Print approx. €9.74–€11.91 excl. taxPreliminary estimate for one variant
Grate or vent for dust collection hoods you might use behind a lathe or miter saw. Mine is sized to fit a PSI Woodworking “Big Gulp” dust hood that mostly I use on the lathe or behind my belt sander, but this might work for other hoods…
Print approx. €3.49–€4.27 excl. taxPreliminary estimate for PETGSource material: PET
Hard to print with ASA, even with brim. I recommend PLA or PETG I improved the model with a wider slot for a scale and also widened the boring for the pencils in the uploaded version. SEE also Insert for Keys and additional Hexkeyholder…
Print approx. €5.91–€7.22 excl. taxPreliminary estimate for one variant
This is a simple thread protector for a lathe spindle. Fits a 34mm 1.5 threads. Printer: MK3s, Filament: Inland PETG Red.
Print approx. €0.58–€0.71 excl. taxPreliminary estimate for PETGSource material: PET
Just a handle with a 1/4 in x 1/4 in square slot (30mm deep) to hold lathe cutting bits with a 1/4 inch shank. Handle is 100mm long with a 16mm diameter. To secure the bit, drill a small hole to fit your retention screw.
This is a boring bar tray to organize boring bars.
Print approx. €3.81–€4.65 excl. taxPreliminary estimate for PETGSource material: PET
Updates 23/10/2024: Uploaded main base and headstock files 29/10/2024: Uploaded STEP file and tooling files, added (most of ) the BOM with links. 10/12/2024: Uploaded main body build guide, replaced: -back right lower, added a slight…
3D Printed Dremel Lathe Precision lathe for most Dremel models intended for fine hobby work (dolls house spindles, model locomotive funnels, wargames canon barrels, etc). Only tested with a Model 800 but should work with any Dremel with…
A simple but effective lather bowl with spiral ridges and brush rest. Very easy to print without supports. There are three sizes, a medium (approx. 110mm internal diameter), with the brush rest not as deep. The large version is…
A flathead engine, also known as a sidevalve engine is an internal combustion engine with its valves contained within the engine block, instead of in the cylinder head, as in an overhead valve engine. The boxer configuration with two…
A flathead engine, also known as a sidevalve engine is an internal combustion engine with its valves contained within the engine block, instead of in the cylinder head, as in an overhead valve engine. Printing and Assembly The parts…
Originally made for cheap tiny lathes like those sold on Amazon ( like so ). Remixed from mdkendall's excellent design that provided the basis for this smaller version. Thanks mdkendall! This version mini-fies the design to: work within…
Introducing our Desktop Lathe Chuck Extension – a versatile tool designed to work seamlessly with your desktop vice's C-clamp, elevating its capabilities for precision work. This innovative extension offers a secure and stable solution…
A flathead engine, also known as a sidevalve engine is an internal combustion engine with its valves contained within the engine block, instead of in the cylinder head, as in an overhead valve engine. Printing and Assembly The parts…
This tool guides a threading die with the tailstock on a lathe. It consists of a 3D-printed handle with a large knurled section for a good grip and individual, swappable die holders. What you get: 3D files (.f3d, .step, .3mf, .stl) of all…
Version 4 of my 3D printed wood lathe. This version fixes a few small things and introduces the newly designed tool rest. Video: https://youtu.be/A2ODwkK4meQ How to video: https://www.youtube.com/watch?v=iUjqbcIMym0&t=4s Project video 1:…
Modelin videolarını izle m3 screws were used to fix the parts to the aluminum profile. other screws and nuts M6 straight shaft and linear bearings 8 mm
This is kinda remix or thing inspired by: http://www.thingiverse.com/thing:1751658 I started with different way of Dremel attachment and decided to redesign the whole thing. I added a knob to threaded rod. There is slot for a small piece…
Designed by: ericthepoolboy Hardware Kit and Build Support by MakerRx Before overhead valves took over, there was the Flathead V8 - raw, simple, and legendary. This 3D printable scale model brings that piece of history to life with moving…
Dremel 4000 Mini Wood Lathe My good friend Zdenko asked me to modify his project, which he failed to implement Materials: 1 set of printed 3D parts PETG, PLA... 2 steel rods 10mm x 600mm 1 steel rod 10mm x 40mm 1 theaded steel rod 10mm x…
If you have a 9x20 lathe then you know what change gears are, and if you bought a used 9x20 lathe some of those gears may have gone missing. These 3D printed gears can be used to replace missing gears. Even if you have the original metal…
I made these jaw holders to wall mount my midi lathe jaw sets. There are 4 mounting holes for #8 wood screws. There are two different versions, only the support depth differs between the two. I included pdf drawings files with some key…
Originally made to hold my mid sized Easy Wood tools, I modifed the design to hold the pro sized hollower I recieved as a gift. The block measures 2.68” X 2.43” X 2.5” (68.1mm X 61.7mm X 63.5mm) A loose slip fit dovetail joint allows the…
This is a 3d printable self centering lathe chuck. It is a great tool for your everyday machinist, or simply as a decoration for those fond of lathes and how they work. This model is great to help you understand how a self centering lathe…
The “universal” mount will work with most dial indicators and fit's into most tool holders. The all-in-one model fits an AXA quick change tool post and replaces the back of your dial indicator. That way you're not tying up an expensive…
The chuck stop was made for my Hare & Forbes AL-320G / L141 metal lathe (Model available within Australia) to locate shorter parts beyond the chuck jaws to provide clearance for facing operations. It has been designed for the standard…
Could not fit part A on my Dremel Model 395, but part B fit. I also wanted some better support in the toolpost holder, so I used 2x part B and connected them together with a longer piece for the toolpost holder. I have a BXA size…
As requested. A modified version of my lather bowl design without a brush rest. Please post your makes. Enjoy 11/28/2020 Update: Added STL file "Lather_Bowl_V4a.stl". This version does not have the in-turned rim. Print Settings Printer…
I designed a simple 3D-printed mount that allows me to store my wood lathe chucks on the wall or any other vertical surface. I mounted mine on the wall of my wooden lathe stand. The mount is designed for 1″ 8TPI thread, but if you like…
made for a genera purpose multi function tool to hold whatever part you need it to.
This gear should work on numerous 9x20 lathes available from Grizzly, Central machinery (Harbor Freight), Jet, and many others. This is an 80 tooth "sacrifical" gear - so called because the idea is that in the event of a head crash or…
Softjaws for my HBM 250x550 Norton Profi Lathe with 125mm Sanou 3-Jaw-Chuck K11-125.
This is a simple tool holder for BXA size quick change tool holder for any lathe. This similar to other tool holder designs uploaded, however this is specifically for lathes with a backsplash panel of 25mm width - the dimensions not…
Like the band Devo says “Whip it, whip it good”. The handle is optional, but it feels much more natural than just holding onto the bowl itself. In addition to your choice of two different handles, you can also choose which style of…
Problem: Need to turn small metal and wood parts but don’t need the accuracy of an expensive machine but need something better than the drill lathes seen on the internet which are made of scrap wood. Notes: Fits a Black and Decker 10 mm…
20230110 added Cast iron file and review the stainless steel with 15° 2021227 updated updated R1 stl file optimized for HSS 10x10mm or 12x12mm, more or less :) 20210528 original Hello, this is an angular tool gauge to check if your are a…
This chuck key holder for my Central Machinery Model 45861 9x20 Lathe is based on an original design by "Clough42" (available here : https://www.thingiverse.com/thing:4392251 ). That design was made for a different model lathe, so I…
I do some hobby lathe work, and spent some time printing tool organizers for everything. This is a simple holder for carbide insert boxes and the torx wrenches associated with them. The holes for the torx wrenches are a bit snug, so…
Update August 26, 2022 : Added files for larger diameter (50mm) Dremel 4000 and similar. See print instructions for more details. Update August 29, 2022 : Although the files in the above update work, I decided that some minor improvements…
This wall mount holds your wood lathe chuck at angle, so there's no need for a threaded stud. Just slip the chuck on and off. There are 4 mounting holes for #8 wood screws. You will need to open the chuck to clear the stud. The wall mount…
A wood lathe upgrade for my milling machine. IMPORTANT: This is an UPGRADE for this project, you will need parts from it: https://www.thingiverse.com/thing:4621593 Build video coming soon hopefully. UPDATE 1, 10/11/2020 : Re uploaded…
Since I didn't have a spare motor, I decided to use my Dremel 4000 to power the Lathe until I get a proper motor. It works well, but make sure the Dremel does not overheat, as it is not designed for prolonged continuous use. It is secured…
OUTDATED, USE THIS VERSION INSTEAD: https://www.thingiverse.com/thing:4678844 Taking down this version because the new version is much safer. many parts are the same as this version, the bed and tailstock have both been replaced. Video…
sherpa micro with: changed filament path to front stronger arm stronger rear housing
Vhorlath Realms – Season I The Gorefang Berserker Warlord is an Orc champion driven by rage, strength, and the hunger for conquest. Towering over lesser warriors, he enters battle as a living storm of iron and fury—an unstoppable warlord…
The machine of the USSR 1 Collection | Verts:524,748 |Faces: 519,546 | Tris: 1,045,237 | Objects: 106 Ready for comments) готов учиться вместе с Вами I am ready to study with you)
This tool is a huge help to centre the piece before you start to work on it. I've printed it in petg and the pin holds the bearing in place without the need for glue. If you print it share here the result in the make section. Enjoy.
I wanted to improve dust extraction around my lathe so I made this simple hood. It pushes into a 100mm hose - I control where the hood sits with a an arrangement that attaches to the hose. The opening is 220mm by 140mm and can be printed…
Egg Lathe For painting eggs. Not for turning them! See also 'Egg Lathe UPDATE' for alternative parts that replace the gears for a smoother rotation at https://www.prusaprinters.org/prints/153374-egg-lathe-update NOTE: Now includes STL…
I designed this organizer for the change gears for my mini lathe. It holds a full set of 2x20, 21, 30, 35, 2x40,45,50,55,57,60,65, 2x80 tooth gears. Print Settings Printer: Sidewinder X1 Rafts: No Supports: No Resolution: 0.3 Infill: 20%…
Precise drilling was a must for what I plan with my minilathe… but I didn't want to shell out for a tailstock DRO Handweel … so I decided to build this. Inspired by a couple of youtube Vids I designed my own version. It angles the…
Chuck holder for you wall. Is suitable for M33 x 3,5 thread on your chuck. I used mine for Teknatool Sepernova and NOVA G3. Print settings: Infill: 30% or more Material PETG Botom layers: 0,3mm Thread layers: 0,15mm
Just a quick holder for my most used lathe tools. It sinks down into the 1.5" gap between the ways on my lathe.
Parametric Chuck Key Holder for Lathe For my lathe (Vevor YS-2260A) the dimensions of the backsplash are: wBackPlate = 13.8; // mm hBackPlate = 9.8; // mm If the backsplash of your lathe has different dimensions, change values in…
Vhorlath Realms – Season I The Ironhide Warg-Reaver is a mounted Orc raider riding a savage beast into the heart of dark fantasy encounters. Clad in rugged armor and driven by raw momentum, this Orc rider brings speed, weight, and feral…
Lathe tool holder There's a right and a left tool holder. Print standing with 10% gyroid/grid infill, and grid support from build plate only. The tool holder module couples with the attachment plate module, print one of each and you have…
Vhorlath Realms – Season I Human Lionguard Warrior, Shieldbearer of the Iron Covenant 3D printable STL miniature for dark fantasy tabletop RPGs, wargaming, painting, collecting and display. The Lionguard Warrior stands among the sworn…
The Harrison M250 is a metalworking lathe, now out of production, but popular second hand in the home workshop. Change gears to cut different thread pitches are very hard to come by, and most lathes do not come with a full set. This print…
I had bought this kit from Swarf Rat way back when and they only sent me the clamp system along with the drawings for the brackets... I never got around to machine them and now decided to print it out. Turns out it wasn’t a good fit for…
Vhorlath Realms – Season I The Whisperveil Shadowblade moves where moonlight breaks beneath ancient branches, unseen until the final strike. Cloaked in silence and sharpened by years of forest warfare, this Elf rogue is a deadly wanderer…
Vhorlath Realms – Season I Human High Mage of the Veiled Star 3D printable STL miniature for dark fantasy tabletop RPGs, wargaming, painting, collecting and display. The High Mage of the Veiled Star walks the battlefield not with brute…
This model(set) is for those who want to connect, firmly but detachable, something round between 1 and 16 mm diameter to their print. A collet then is a good option. have an ER25 collar holder and nut system but in their collet collection…
Small tool holder that's great for holding tools for a benchtop lathe, mill, or drill press. 6 holes sized for MT2, one of the most common taper sizes. Also has smaller holes between the MT2 holes for smaller tools (chuck key, tightening…
I printed this in PETG-CF, for strength and a nice texture. See the photos for recommended supports. It's printed angled to maintain strength and to keep a consistent surface finish. I can provide customized versions of this model for…
Storage for import lathe tool holders.
This is a tool that fits on the bull gear of a Craftsman/Atlas lathe to assist with removal of the chuck. I measured and modeled this to fit my Craftsman/Atlas 12" lathe. It may fit other Atlas lathes. I've included the stl file of what I…
This is a CAD model I did for my SIEG mini lathe in order to look at the spacing of components on the main spindle when upgrading it to NSK tapered roller bearings. All dimensions were measured from my actual casting, which is from a…
Complete lathe assembly from my flexispeed model lathe with 4 jaw independant chuck. Modelled manually in solidworks.
This is an organizer for square-shank lathe tools, as well as boring bars/drill bits.
Vhorlath Realms – Season I The Skullmaul Warchief is an Orc commander shaped by conquest, blood feuds, and countless battlefield victories. More than a simple brute, he stands as the iron will of his warband—leading from the front,…
Vhorlath Realms – Season I The Wraith Revenant, Herald of the Black Throne is an Undead dark fantasy 3D printable STL miniature depicting a cursed spirit bound to an ancient throne of death and ruin. Neither fully ghost nor corpse, this…
