Counting matching models…
Microwave Cover for Food / Anti-Splatter / Finger grips. Both are 65mm tall. The 210mm dia is the largest it can fit on MK3S. Material: Transparent Polypropylene (PP) or PETG
Print approx. €7.94–€9.71 excl. taxPreliminary estimate for PETGSource material: PET
Hauptcharakter aus dem Videospiel Splatterhouse
Print approx. €4.22–€5.15 excl. taxPreliminary estimate for one variant
A splattered Wile-E Coyote
This is a simple shield to prevent dust, debris, coffee splatter, etc. from entering the Gaggia Classic / Pro / Evo water tank. As a result, the water stays fresher for longer and biofilm takes longer to build up. There are 3 variants.…
I liked this model a lot, but the first print I noticed the scraper edge wasn't as clean and sharp as id like. I found it to be the bottom edge of the model was slightly beveled and as such, the first layer of the scraper was printing…
Surely you noticed the hole in the center of the round garden table ? It's there for a reason! Meet two additions that will expand the capabilities of the table! Protect a covered table from rain or sun? Easy as pie! With an amazing…
This a remix of Machvolum's model which comes from visle's original model. This version add's rounded corners to Machvolum's model. The theory is that on sharp angles (such as 90 degree corners or similar) the extruded filament tends to…
This model was originally created and posted by JamesThePrinter. Thank you for making this. I personally was having one issue though. The tail section kept coming loose from the build plate. I noticed that it was essentially printing a…
The Church of Jesus Christ LDS Temples. Remixed.
IF YOU LIKE THIS MODEL, CHECK OUT MY OTHER MODELS AND SUPPORT MY PAGE Patreon at https://www.patreon.com/pixelchronicles ! Pokemon inspired, Tatsugiri Order Up platter, Tabletop DnD miniature This model is meant to be printed individually…
Choose between 9 unique splatters! I printed in PLA Infill: 15% Layer Height: 0.20mm Supports: No If you like my work consider Buy me a coffee 😊
Splattershot in Splatoon 3. It is a one-piece model and cannot be disassembled into parts. Also note that the rear cap joint is a bit thin.
Today I've got something new for your coffee table or garden picnic table. A modern ribbed cake stand – just the right piece for presenting and serving your homemade treats and baked goods. This model is simple and quick to print and…
I recently posted my "derSchraderFlatter" Schrader valve deflator - a screw on replacement for a tire valve cap that holds the valve open so the tire can be deflated when needed for service without the need to manually hold it open with a…
A splatter cover for outlets or switches. 0.4mm nozzle, 0.2mm layer, PLA, Sovol SV01
This is just a simple cloud platter that I used as a base for a ring holder. You can adjust the size in your slicer if you want it bigger or smaller. Print Settings Printer Brand: Prusa Printer: I3 MK3S Rafts: No Supports: No Resolution:…
This simple 3d print was created to cover the gap between the water tank and Gaggia Classic body and prevent coffee splatter from entering the water tank. Doing this prevents gunk buildup at the bottom of the tank considerably, keeping…
I made cookie Cutters that looks like a Paint Splatter from Splatoon. If you love this design and want to see more fun projects like it, consider joining my club on Printables to help me keep adding free models for everyone to enjoy. If…
This is more of a personal project for me, but if you want me to fix some things don't hesitate to reach out! This version is split up even further so that every part can be printed with one color without painting. All the parts come…
A stackable wash paint palette that doubles as a deviled egg serving platter. Printed in PLA with a combination of 0.1 mm and 0.2 mm layer heights with ironing for a smooth surface and fine curves.
Haven't had a chance to print yet, will update here once my printer is up and running again. THIS IS NOT MY ORIGINAL DESIGN.
This model is a small version of Splatoon 2 Splattershot weapon (170x120x60) designed for childs and can be printed relatively quickly. You can customize colors as your wish. Some parts à screwed but others needs to be glued. Print…
I needed a flat edged cable clip for 2020 extrusions on a Voron 2.4. I found the original design by shadokyn but needed something which let me remove the panels without removing the clips. A few minutes later, this remix was born.
Roll into flavor with this adorable Sushi Gnome Master! Clad in a traditional chef’s coat and tall hat, he wields a sleek sushi knife (yanagiba) in one hand and delicately presents a wooden platter piled high with nigiri and maki rolls in…
This is not my design - I found it and resized it for the very common 6" exhaust tubing. It was much smaller which is maybe common in another area, but in the US - the common size of the exhaust piping for portable AC's is 6" diameter…
In 2016 I took a family tradition of a crafty little Christmas tree with Scripture themed ornaments each with a lesson about Jesus Christ and made a 3D printed version. While that version was okay, the tree was too fragile, and there was…
Shell for making mirrors from your 3.5" HDD drive platter collection. Shells for 0.6mm, 1.3mm and 1.8mm thick platters.
I was looking around for a Pumpkin lantern to print for Halloween and really liked UserS' one, but I had to split it into two separate models so it would fit into my 220mm square print area. While I had the model in Tinkercad I decided to…
Consider following me on Instagram (@SMACKMAX_). I try to post all of my projects to build a portfolio of my projects, often in advance of publishing the models. https://www.instagram.com/smackmax_/ Spacy Serving Tray, A serving tray…
Zusammen mit einer 3,5-Zoll-HDD-Platte ergibt dieser Druck einen nerdigen Untersetzer. Together with a 3.5 inch HDD platter this print gives you a nerdy coaster.
Remix of Anycubic wash and cure plate holder by Kyntak999. I made it shorter and cut a bigger hole in the middle to be a bit more efficient on filament used. Function is unchanged.
Great design with holder, just scaled down to fit on my Prusa mk4s platter, all in one go.
Like many people, I had a stack of hard drive platters piling up. Each one is a highly polished aluminum mirror. I thought that there must be a 3D printed use for them. So I fired up 123D Design and made 2 different drink coaster/display…
This is the classic splattershot from splatoon
Designed for 0.4 nozzles. Print at 100% infill with a layer height of 0.1mm with a base layer of 0.2mm The Model is 150x200.62mm in size You may print at higher layer heights below the Min Depth of 0.5mm The Max Depth is 2.2mm and the…
Turntable platter for dyi turntable project. Belt driven Designed gimble headshell and pivot for gimble join tone arm base to motor base with rubber/foam tape to isolate motor noise from tonearm base or make wooden base and use pre-made…
Stand for 2.5" und 3.5" HDD Platters for use as Mirrors 1 M3 bolt and nut is required. Suitable for 20 mm (2.5") and 24.7 mm (3.5") ID Platters Print instructions Category: Bathroom Summary Stand for 2.5" und 3.5" HDD Platters for use as…
The name says it all! Printed with ABS and chemically welded with acetone. Fully tested on Wolf Spider https://www.prusaprinters.org/prints/2689-wolf-spider File names tell you how many of each part to print. This is 17.5" long (44.4 cm).
As per suggestion, updated the V1 model to be flatter, and now it slots directly into the wall
Mini platter / low-sided bowl / serving dish - whatever you want to call it, with stand. Great for holding nuts, grapes, candy, biscuits etc. Multiple uses of course, not just for food. Note: If you use this for food, be aware most…
Simple spindle for your hard disk drive platter collection
The Endless Gears Busy Board model is fantastic. I found that as I had printed the base board with .300mm layers, the interior holes were tight for the gears. I took the 48 tooth gear in the set and scaled the pin down by 5% and also made…
GWAR 90's splatter logo fridge magnet designed from scratch. Add nine 6x2mm magnets and slap it on your fridge.
This is a 5in1 Kumiko Lantern of my first 4 designs. The full lanterns are to come. There are 3 different bottoms for different LED tea lights. Print Settings Printer Brand: Creality Printer: Ender 3 Rafts: No Supports: No Resolution:…
Easy print for a paint splatter shaped bubble wand. I drew the splatter, it's not meant to be uniform because I think it makes it more…splattery?! The file prints one at a time, but I have printed 4 and had no issues. Tested with bubbles…
I love the design, I really liked the idea. What bothered me, however, was that the button protruded too far out of the box, which didn't look so nice. I reduced the depth so the button doesn't stick out that far out of the closet. In…
A square of mounting tape on the flat side is more than enough to hold it.
Four sided Owl Lattern Tealight for Halloween! Prints faster with 0.6 nozzle, and even better with MK4 with new firmware (RC). Needs support for mouth and lower top edge. Larger is probably better.
I don't know who else needs this but I found myself juggling around with 2 records when I'm changing on my turn table. This will hold your record firmly on a flat surface while you change the record and are ready to put it back in the…
EN: allows a better diffusion of the heated air in order to better dehydrate the spools use a 5 litter bucket to allow up to 3 spools FR: permet d'avoir une meilleure diffusion de l'air chauffé afin de mieux déshydrater les bobines…
This set includes four unique designs: Trick or Treat coaster (black with eerie yellow text) Spider Web coaster (white with black detailing) Double Spider coaster (creepy black spiders on white) Skull coaster (bold red and black skull…
Parts needed: 4x 36 mm or longer M6 bolts with hexagonal heads 4 wing nuts for the M6 bolts 1 drive bolt (M6). Should be longer than the others 4x 608-style bearings Silicone tubing ~5mm ID (or smaller ID) and 10mm OD. Assembly: Push the…
This is a 5in1 Kumiko Lantern of my second 4 designs. The full lanterns are to come. There are 3 different bottoms for different LED tea lights. Print Settings Printer Brand: Creality Printer: Ender 3 Rafts: No Supports: No Resolution:…
The ejector is (depending on the filament you used) bendy, meaning it can block itself instead of sliding smoothly upward. I added a leftmost “handle” and modified the platter to avoid this problem. Platter keeps the two (currently…
Enhance your entertaining with this 3D printed hexagonal appetizer tray featuring a modern honeycomb design. Designed with six interconnected compartments arranged within a hexagon, it provides a practical and stylish way to serve and…
Keeps a need stack of to coasters repurposed harddrive platers. Instead of throwing your end-of-live disks to the public garbage. And perhaps spending time making sure your data is not thrown away with them. FYI It's pretty easy to open…
We had some material from an old acrylic visor lying around, so I upcycled it into a splash guard for our Keurig K-Slim coffee maker. You can use pretty much any clear acrylic film for the splash guard. The groove for the acrylic is…
This is the first of my Kumiko inspired tea light lanterns. There are 3 different bottoms for different LED tea lights. Also includes "half walls" for a shorter lantern. All my "half wall" and "full wall" designs are interchangeable with…
The goal of this project is to fix an issue I've noticed with my Victrola Eastwood Record Player. The partial platter used is lightweight and cheap, and I believe the overhang the record makes contributes to some pitch distortion I…
Allows you to store your microwave cover anywhere you desire. Designed for Nordic Ware splatter cover. May fit other manufacturers. Assemble with #6 screws (~3.5mm). I added felt stickers to increase the friction. Material: Any
This is a Splattershot for for LEG0 minifigures. It can fit a LEG0 stud, if you want it to. Then, you can put a LEG0 bar into to make it shoot out ink! This is a remake of Splatoon ink gun by Splatoon ink gun by Tmaxinlava - Thingiverse,…
Feel free to Print them in different colors, like in the game If you love this design and want to see more fun projects like it, consider joining my club on Printables to help me keep adding free models for everyone to enjoy. If you don't…
This is a remix of the Fold 4 Quick Swap plate to recreate the standard kickstand insert found on the Samsung Back Flip Cover with Pen for Samsung Galaxy Z Fold4, but with the added benefit that it is nearly completely flat. I may update…
An updated "silver platter" for "That's Pretty Clever" plus a simple insert to hold the dice and pens. The regular STL files have an engraved fox. Also included are versions for dual color printers, see 3mf files for setup. If you like…
I was collecting HDD platters for couple of years for no particular reason but I ended up the idea for making a small lamp with them. I used 12V led strips and roll it around the led stick like a lightsaber. Led stick have too parts for…
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm The Model is 200x200mm in size You may print at higher layer heights below the Min Depth of 0.48mm The Max Depth is 3.6mm and the Actual Depth is 2.6mm…
The source marked this model as adult content.
Printed with PETG at 15%. Check out the video on my Youtube channel for the instructions on how to make the targets. Variety of stencils and more to be added.
It's an alternate platter for @RagingRoosevelt 's horizontal spool holder
Warning: Before printing make sure that this mount will fit under the platter. Your turntable will probably have to be partially disassembled to route the wires in a correct manner. The mount itself is held in place with double sided…
Flat(ter) platform to put your scale on, the distance from the platform to the lower end of the brew group is about 145mm. It's easy to print upside down without supports. I never remodelled the front because it's working fine for me, but…
Designed to be printed horizontally to improve strength of the bendy tags.
Just another paint splatter style Hueforge that I put together and hope you can enjoy as well! Colors and layer settings: Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm The Model is 200x200mm in size You…
Noticed a disturbing lack of cool death-metal logo signs. At the 3mm Z-height the model is at now, add a color change at Layer #8(1.60mm) Can be scaled to whatever dimension you'd like.
Sometimes when you go to quickly blend something with an immersion blender it can be a bit messier or splashier than you anticipated. This guard blocks small splashes when using the cup that usually comes with these blenders. Modeled for…
A fun little dice tray with filleted corners to prevent cocked dice. Will need to convert from mm to inches in bambu slicer. If need be, I can attach or send the dwg on request.
The Model is 150x150mm in size You may print at higher layer heights below the Min Depth of 0.48mm The Max Depth is 2.2mm and the Actual Depth is 2.3mm Filaments Used: PLA+ Sunlu Black Transmission Distance: 0.6 PLA+ Sunlu Blue…
Mój indywidualny projekt z trochę innym wzorem niż wszystkie dotychczasowe ścięte lub pochylone paski. Może komuś się spodoba, po za tym to fajna poręczna miseczka na przekąski, może również stanowić element dekoracyjny.
Holders for splatter screen (IKEA STABIL). Was able to get the screen out of the way when utilizing the empty space under the shelf. You need to print two sideholders to keep the screen under the shelf. I created the stopper later as…
This tray is for the dice game Twice as Clever! The game uses a platter to place discarded die you choose not to score. It does not come with the platter but has one drawn in the inside of the box. I created this one for the game just…
I have a Soehnle kitchen scale which has a glass platter on top which is glued to a adaptor which is screwed into the base. The glass detached from the adaptor and after failed attempts of gluing it back on with superglue and epoxy, which…
A marvelous 3d picture to add to your home, office, or as a gift The First Presidency , also called the Quorum of the Presidency of the Church or simply the Presidency, is the presiding governing body of the Church of Jesus Christ of…
Simple 2 part holder specifically for the IKEA KLOCKREN Splatter Screen. This keeps the splatter screen from falling while still making it easy to reach. Contains a slot to allow it to be fixed to the wall with ~2mm-thick tape.
The piece on which the glass platter is screwed broke. After failed attempts of gluing it back together with superglue I designed this replacement part. To install it, you must unscrew all the bolts under the scale, 4 are hidden under the…
The Model is 150x150mm in size You may print at higher layer heights below the Min Depth of 0.48mm The Max Depth is 2.2mm and the Actual Depth is 2.3mm Filaments Used: PLA+ Sunlu Black Transmission Distance: 0.6 PLA+ Sunlu Blue…
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm The Model is 175x175mm in size the Model uses 4 filaments in this order : White, Tan, Red, Black Start with White At layer #9 (0.8mm) swap to tan At layer #15…
A bust of Donald Trump, remixed by literally adding Trump's head to Putin's body. Interpret that how you will.
These are the three models I used to paint a splatter effect on a blaster I built for myself. 1. Load the part you want printed 2. Right click the model, "Add Modifier", "Load" and select the paint splatter STLs 3. Position how you want…
This Pumpkin Snack Tray is a fun seasonal organizer designed in the shape of a classic pumpkin with multiple divided compartments for keeping treats and small items neatly separated. The bright orange interior, contrasting dark border and…
Best to use PETG which won't warp or get hot
This is a simple bracket designed to mount an IKEA KLOCKREN splatter screen. The holder itself is made up of two identical parts , affixed using 12 mm wide double-sided adhesive tape. To prevent the screen from sliding out, the two parts…
Hook to hold platter on Wall, my wife wanted this platter hunk on the wall but also wanted it removable. Print two hooks with hole for the bottom and one without holes for the top and use command velcro strips to hold the top one on.
A sitting platypus named platter I made in a basic cadding software
Say goodbye to messy mealtimes! Our Cat Splatter Guard is designed to fit standard 7.5-inch plates , preventing food from splattering while allowing your cat to eat comfortably. Whether your feline is a messy eater or just loves to dig…
LED TEALIGHTS ONLY. These are printed plastic cups. Never use a real flame, burning candle, hot wax, oil, incense or a hot metal insert in them. This is a decorative LED holder for Diwali, not a fire-safe diya. Untested prototype: no…
