Print in Place Chevy K5 Blazer
print took around 13 hours. You'll need good cooling it has 22 degree overhangs. I even had a little drooping with a 5015 fan.
- Downloads
- 653
- Likes
- 89
- Rating
- 5
874 models
print took around 13 hours. You'll need good cooling it has 22 degree overhangs. I even had a little drooping with a 5015 fan.
I printed in PLA Infill: 15% Layer Height: 0.10mm Supports: Yes, snug but only to support oring If you like my work consider Buy me a coffee 😊
The speed will depend on the machine and the type of PLA you are using. I always recommend that the first layers be printed at a speed between 10% and 20% (although if you are confident and know that the bed is perfectly leveled, you can…
Jednoduché a nenáročné řešení chlazení střídače Solax X3 hybrid G4, které za pomoci tří ventilátorů a termostatu W1209 umožní vyšší průtok vzduchu přes žebra střídače. Držák rámu je upevněn za neosazené průchodky CAN1/2 a DRM/OFF. Na…
UFO as described by Bob Lazar
Lazy Sue is my first attempt at a "turntable" to aid my airbrushing work. It's still pretty much work in progress but it's usable - just stick your model onto the “plate”, fire up your airbrush and use one of your hands to slowly rotate…
Quick print target pin with extra pins for holding the face in place for archery targets. With a .6mm nozzle it's printable in a few minutes, slow printing in 12m als my example gcode that printed the green pin shows. No support needed,…
Práctico llavero con el logo de Chevrolet para la camioneta tipo BLAZER. NO requiere soportes. Impreso en PLA con cuatro capas de colores : blanco, gris, negro y rojo. Fácil y rápido de imprimir.
Lusail Plaza Towers are a set of four office towers on the Al Sa'ad Plaza, Commercial Boulevard, Lusail, Qatar. The two buildings are 301 metres (988 ft) and the two others 215 m (705 ft) high and has 220 floors in the four towers…
Caja adicional para aprovechar el espacio superior disponible en la consola central de almacenamiento de la SUV - Blazer RS - Chevrolet. Solo ocupa una parte por lo que deja visible la parte inferior. Lo diseñé en dos partes por lo que NO…
This is an adapter for inflating a Forclaz Trekking MT500 Air mattress from Decathlon with an inexpensive electric mini air pump from Pacoone (square version with lamp). The adapter is simply inserted between the pump outlet and the…
The Forclaz Headlight from Decathlon is super bright and has a rechargeable battery. For emergency, it can also be operated with non-rechargeable batteries. The holder is designed to be easily fitted with zip-ties to the handlebar or the…
Scientific name -- Ursus magnificus cotnami Size -- 1400 lbs. Utility belt adds an additional 40 lbs. Monkeys are about 12 lbs. each. Diet -- mostly in the liquid form From the dark reaches of Canada comes a superhero dedicated to truth,…
The model is a 100-mm-diameter lazy susan turntable with a swappable bore hub - just lift a bore out and push another in. It's designed to allow a 3D printer to draw filament when the spool is rotating around a vertical axis. It's useful…
Gcode is a Garmin twist-compatible mount for the Blackburn Dayblazer 800 bicycle light. STL is just the light section, needs to be mated to a suitable Garmin-compatible model, as referenced in this design. 4mm width zip ties to secure.
Používal jsem už původní model, ale přisávání horkého vzduchu od výtisku zhoršovalo kvalitu tisku a tak jsem si stáhl vylepšený, který tiskl přeci jen lépe. Ovšem i ten jsem si upravil odstraněním horní části, aby se lépe chladil motor…
A shortcut tool for avid KSP players - simply hold it up to the screen and time-warp until planets are aligned. This was a quick and dirty model that I made because I was lazy and didn't want to look up the angles for planetary transfer…
Montura para capsula TSB-165A de 16mm del micrófono BM-800. Permite el cambio de plano del micrófono de vertical a horizontal, mediante el reemplazo de la montura original. Impreso con Biqu B1, boquilla de 0.4, PLA, capa de 0.2mm, 30% de…
🔥 BlazeTooth : The Fiery Fusion of Toothless and Flames! 🔥 BlazeTooth is a unique 3D model that combines the spirit of Toothless with blazing flames. With fiery wings and a flexible body, this dragon is ready to join your collection.…
A whole lot of Sonic the Hedgehog characters. For characters like Tails who float above their platform plate, there’s a version with a connection. Includes: Sonic Tails Knuckles Shadow Silver Rouge Espio Charmy Vector Classic Sonic Blaze…
We feel this way sometimes. A great 3D print to represent those lazy moments!! :) Scale it up if you wish with the .stl file!
Meet the Flexi Lazy Raccoon – the ultimate chill buddy for your desk, shelf, or backpack! This cute, poseable raccoon lies completely flat on its belly, looking adorable while being fully articulated. Whether you love raccoons, fidget…
L.E. by mistake initially i uploaded an old version of the inferior piece. I corrected this mistake. I apologize to all who have downloaded and printed the part. To make the design work unfortunately you need to reprint the inferior…
'Tis the season, Die Hard fans… Welcome to the Nakatomi Plaza building! *TRY WITHOUT SUPPORTS FIRST* - experience has shown that it prints cleaner than with supports, and also avoids the difficult removal, where the pillars may break.…
This is a follow-up to my earlier posting of Lazy Susan mechanisms. I had a few comments about conical bearings and decided let's see if it is better and how much better. So here it is... Video at... https://youtu.be/1lg1n2SvySI More…
Jesus Raising Lazarus. Apologies for this being such a huge file. Anything less than a million tris and the model would just go garbage on me. I may come back and see if I can get it down to 500,000 but for now this is what I could get to…
Air Ventilation Grille / Grid - Collection (rectangular - round) - Griglia di ventilazione misure varie (rettangolare - tonda) Dimensional measures: Hex 100mm Ø100mm 100x100mm 100x200mm 100x200mm Vertical (NEW) 125x150mm 150x150mm…
This is a just-for-fun mini turntable or coffee mug lazy Susan. Pretty straightforward, similar to my other lazy Susan designs using conical bearings. Please see the notes and details at... https://logicalplanet.com/ I appreciate any…
With its cute and friendly appearance, this delightful creature is designed to print easily and flawlessly, whether you're using a beginner 3D Printer or a fancy pants one! And, thanks to its articulated joints, you can pose your axolotl…
This was designed to work for installation in my 2007 Chevrolet Trailblazer SS. Dash kit prints FACE DOWN with tree supports. I printed with 25 percent rectilinear infill and 4 walls / 4 top and bottom layers on my Bambulab X1C. Be sure…
A cute and of course tired panda resting on the pages of a book. Make this bookmark for yourself or as a cool gift
Lazy Grim Reaper – Multi-Color 3D Print Even the Grim Reaper needs a morning coffee break before harvesting souls. Meet the Lazy Grim Reaper , rocking cozy bunny slippers and clutching his favorite mug! A perfect, humorous desk buddy,…
You'll need some 6mm BB gun ammo. (The ones I used had a real diameter of 5.9mm, measured with calipers.) If you want to check that your BBs will work with this print, you can print the top and bottom sections from the “Test prints”…
Thank you to the Voron Design team for all the hard work and amazing printers. Feedback on this mod is appreciated! I think this is a “must have” mod for the V0. Model C is the current LazyCam, but models A and B are here as well. I can't…
A turntable or lazy susan for popular deck building card game, Dominion.
This video shows how this Lazy Kate is used. A lazy kate is generally used to hold bobbins while you ply yarn on a spinning wheel. This design is a colapsable design that fits pieces together and uses magnets to make them more user…
From my experience, only Prusament rolls fit properly in the grooves under the Mini. And even then, it doesn't turn super smoothly. I made this lazy Suzanne so that I can use it with any filament brand, no matter how wide the center hole…
This keychain is very easy to print Just change the color of the filament at a height of 2 mm. For this, select the" panda"file No other special settings are required. There are two other files named "Panda A" and "Panda B", the colors…
Enhance your dining table with our 3D Printable Customizable Rotating Serving Tray . Designed for easy access to shared dishes, this turntable lets you smoothly rotate items around the table, making it ideal for family meals and…
This adorable 3D-printed sleeping panda is the perfect blend of cuteness and craftsmanship! Made with dual-color filament, this design showcases smooth curves, crisp details, and a high-quality finish that will melt any animal lover's…
I made this model so I can use Railblaza Rod Holders as well as aftermarket rod holders and accessories. You only need to change the teeth part to fill your needs. Print with 4 parameters and 45% infill. I used PETG because the layers…
a lazy susan to put spices, vitamins, or whatever... i fixed the roller pin problem. Category: Organization
This is a setup for using Railblaza accessories. Print with 4 parameters and 45% infill. I used PETG because the layers bond better than PLA and it has some flexibility that PLA doesn't have. The gasket must be printed on flexible…
Bob Lazar supposedly worked at S4 near Area 51 back in the late 1980's on a reverse-engineering program that he claims began there in 1979. The "Sport Model" is one of nine flying discs at the S4 facility. Some were recovered crashes, and…
ℹ Tips for printing Multicolor: Filament: PLA Supports: Yes! Tree Auto Layer height: 0,2mm Wall loops: 3 Infill: 15% Seam position: back Wall generator: - Detect thin walls: - Brim: No! BuildPlate: - Info‼: Do not scale the Teddybear any…
Update! Added a new model that adds a lip to the lower piece to add just a bit of drag to the spool so that it does not unwind too freely. This is a lazy susan, or a rotating table to let the filament spool turn freely. Hanging the spool…
Ricks Lazer Gun : Rick and Morty
In case you need to turn a table! Snap together, LazySusan mechanisms in 3 sizes. Uses printed pin bearings. 2024-03-08 update: I have created a version 2.0 of this with conical bearings. It is much better. Please see it at….…
⚙ RECOMMENDED 3D PRINT SETTINGS Material: PLA or PLA+ recommended Layer Height: 0.16 mm for finer detail; 0.20 mm for faster prints Infill: 10–15% recommended for most models Wall Loops: 2–3 Supports: Enable where necessary based on model…
Ventilation Grille - Duct Cover - Griglia ventilazione a bocca di lupo Dimensional measures: 105x105mm 105x210mm 210x210mm 210x105mm Ø105mm Resize to adjust dimension All our designs are free to download and use. Your support fuels our…
Follow us on Patreon & Instagram for the latest models. ❱ Instagram: https://www.instagram.com/sektor7_studios_3d/ ❱ Patreon: https://www.patreon.com/sektor7_studios (commercial license & more beautiful designs) CUTE CATS SCULPTURES 🐱…
Here is a model that fits into Railblaza Rod Holder mount. Now You can design whatever You like on top, and model Your own custom accessory for the boat, kayak, belly boat etc…
The source marked this model as adult content.
blaze · planter an elegant modern minimalist planter designed for contemporary spaces. this planter features a clean, geometric silhouette with a wrap-around drip plate that seamlessly extends from the base. The elevated design allows for…
This is a spinning spray bed i knocked up to prime and lacquer some models. Its a little unstable, if anyone wants I can extend the legs or add an outer circle. Works fine as it is though There are 3 1.75mm indents in the top incase you…
Ventilation grille 120mm built-in I created a ventilation grille to replace some old damaged grids. Conical joint. Print Info Without supports. layer: 0.2mm infill: 15-20% material: PETG or ABS for better outdoor strength maybe ASA would…
This is a replacement emblem for the front of a Chevrolet Trailblazer. Mine fell off of my 2007 Trailblazer SS. It's designed to have 2 M5 brass threaded head inserts installed on the back, you will need 2 M5 screws and washers, too.…
Lazy Chonky Monkey – The Ultimate Vibe Statue Meet the Lazy Chonky Monkey – a delightfully chunky, emotionally complex primate who’s clearly had enough of everything. Few supports are needed. I used organic-style supports, which peeled…
This is a Lazy Kate that is compatible with bobbins from the EEW 5.0, EEW 5.1, EEW 5.2, and EEW Nano. The little hole and slot allows you to add a piece of elastic so you can tension the bobbin. For more fiber tools see our store at:…
Lazy Susans for plants or spools or plates or cakes - with optional clip keeping it together
A nice remix of this panda keychain: https://www.printables.com/model/937189-no-you-do-it-panda-keychain/files
This is a mount with clip for the Railblaza brand hardware. Mount and clip to be printed separately. Mount will also work with original clip. Clip was printed at 100% infill. Mount was printed at 60% infill. you may have to cut to…
The original model wasn't quite suitable for printing and assembly, so I cut it up some more, and made some inserts to add strength at the joints. You will need to print multiple of some inserts and I labelled those files as needed. This…
An easy printable model of Palazzo Ducale (Doge's Palace) and Basilica San Marco from Venice, Italy. “The palace was the residence of the Doge of Venice, the supreme authority of the former Republic of Venice. It was built in 1340 and…
So while working on modifying the Open Ball Vise to use fewer metal parts, I wanted to include turntable/lazy susan with it. Prints and works great, though I did sand the ball tracks. Works without lube, but I prefer it lubed, as it's…
From the episode of Adventure Time - Angel Face, Season 7, episode 17. Full model or separate pieces for easier painting
Inspired by this commercial product: https://www.youtube.com/shorts/DahWUlaQY_0 Which is basically Chinese thing available on aliexpress (like all their products). No supports, PETG, 0.6 line width recommended.
Remixed MarvinPunds nice turntable design (https://www.thingiverse.com/thing:2806615) for use with the very common 608 bearings (the ones that are used on skateboards amongst other things). It should be a nice tight fit on the bearing.…
This is for the card game Dominion, by Rio Grande Games. It's a large (~60cm in diameter) tray designed to be place on a "lazy susan" base so all players can spin the tray and reach all the cards easily. It can hold both sleeved and…
WELCOME TO THE PARTY PALS!" I designed this X-Mas Tree Topper in tribute to one of the GREATEST Christmas movies of all time! Yes, DIE HARD is a Christmas movie!!! It's a super easy project. and yes, there may be some Nakatomi Towers out…
This is a knob cover for the Blazer GT8000 Big Shot torch, made to allow for easier 1 hand usability. Feel free to remix and change the fins to your liking.
This is a re-upload of my low-effort hinge mod that I posted on TeamFDM.com. These models were derived from two excellent hinge mods that I very haphazardly slicer-spliced together. At the time of initially posting this, I had no CAD…
Overview No CAD skills required! Everything is handled via easy-to-use spreadsheets. Smart modularity: up to 8 user defined modules, where each module can have fully parametric: up to 4 pillars for PCB mounting one rectangular hole on the…
This is a simple Lazy Susan bearing design I made for a future project. It currently is 5" in diameter, but I intend on making it much larger, so this is really a proof of concept. You can buy Lazy Susan bearings in the 20" range, but…
a simple lazy susan design simply place rollers into slots in bottom and the top place top on rollers . this is an improved version. no supports
A reindeer character designed to print with supports on build plate only. Scalable & Paintable DND figure. Designed to print with Tree Supports on build plate only for EZ removal! Powered by image-to-3D from MakerWorld…
Easy to print, will need support. The second piece glues on and the magazine will load in
Od válce doporučuji odsadit spojovacími maticemi (viz foto) ať se "pacičky" neroztečou. Osobně jsem vždy tiskl z PETG, ale to není příliš dlouhodobé řešení, doporučuji tepelně odolnější materiál. Tiskněte pacičkami na printbedu, takže od…
Fifth set of Sonic figures featuring two future furries Set includes · Silver · Blaze (May update this in the future with Super SIlver and Mephiles if I ever make them) All my figurine and statue models will always and forever be free! If…
Print with a resin printer on its edge and about 45 degree angle. One piece. There is pie section cut out so you can see inside. With the opening pointed down to drain. The other cutout is the door as he described. Make it a Christmas…
My wife has recently begun volunteering at our local Humane Society, caring for the cats and kittens. She really wants to bring one home, but for now it's on hold. I thought she would like some Cat Cookies to tide her over. As always I am…
Remix on a remix , used for packing the 53 mm or stubby or dog walker joints from Blazy Susan. Not the prettiest, but she fits real good like. Ayyyuup. Post any comments, concerns, or makes k thnx bye. <3 Standard .2 layer height works…
I made this so I can use my Railblaza accessories. Print with 4 parameters and 45% infill. I used PETG because the layers bond better than PLA and it has some flexibility that PLA doesn't have. The gasket must be printed with a flexible…
I made this adapter to replace the unused ash tray with a USB/AUX cable (paid link) so I could connect and charge my phone. I used it for a 1990 Chevy Blazer, but I believe it should fit Chevrolet and GMC trucks from 1973-1987 as well as…
Add 1x 608 bearing to turn old prusament spools into a useful tool. Added a pin + Made it stronger & more printable.
A happy Kirin! The tail is a separate part, and is designed to be connected with a wire with 1.2mm diameter.
This is a lazy susan I designed a couple years ago to help organize our spices. It's small, holds about 6 spice containers. It might feel a little wobbly at first, especially if you load only one side of the rack, but it has stabilized…
UPDATE 2025-09-09: I've added the missing lazy susan files. Thanks for letting me know! I got impatient waiting for the lazy suzan to arrive from Amazon so I designed a printable version. While I was at it I remade the fractal vase to…
A Lazy Susan what for da paintin' aand whatnot of my tree D prints n'at. Use 608 bearing.
⚙ RECOMMENDED 3D PRINT SETTINGS Material: PLA or PLA+ recommended Layer Height: 0.16 mm for finer detail; 0.20 mm for faster prints Infill: 10–15% recommended for most models Wall Loops: 2–3 Supports: Enable where necessary based on model…
I was looking around and unable to find a good version of a Lazy Susan. I made this one fully parametric. You can adjust multiple parameters depending on what you requirements are (see picture). Number of bearings Bearing OD Top and…
All the outfits look so good! Each character has one NRC key and one dorm key part of their blazing jewel uniform. These models are designed for a MSLA printer. Print in resin! COSPLAYERS PRINT AT 125% to make the keys pop against the…
FMS FCX24 Chevrolet K5 Blazer bottom protector. Works with my FPV camera mount . Needs 8 small screws to mount (make sure they don't stick from other side because they can scratch steering servo). You need to print: 1 Left protector 1…
Turn table that uses glass marbles for a smooth rotating experience. Ball diameter is around 15-17mm (Glass marbles toys). I suggest putting a wood panel on it so you can screw on it. Ender 3 v2 0.8 nozzle Works great for photogrammetry…
I had a lazy susan for the kitchen/fridge and used it to hold tea bags and drinks. It got a bit messy so I made these are compartments to keep it organised. These have been designed for a 22cm diameter circle. Scaling it up to fit your…
Update to my Lazy Grid Clock: https://www.thingiverse.com/thing:3241802 (v1 removed from thingiverse. Note: Just uploaded/imported this to prusa printers to try and get a feel for the editing capabilities here... so layout/images/whatever…
Needed a mount for my new bike and since there was no space on the saddle pole left for the default BLAZE mount, I decided to design one. The BLAZE light snaps into the mount, so no extra fixation is required and it can easily be removed…
Follow us on Patreon & Instagram for the latest models. ❱ Instagram: https://www.instagram.com/sektor7_studios_3d/ ❱ Patreon: https://www.patreon.com/sektor7_studios (commercial license & more beautiful designs) CUTE DOG SCULPTURES 🐶…