Search results: lm1

Sort order

Counting matching models…

P
PrintablesPrintium 3D

LM8UU & LM10LUU Bearing Marker

Use this simple tool to accurately mark each LM8UU or LM10LUU bearing in your next build with a permanent marker for precise alignment every time. Prep Clean off the oil film on the outside of the bearings before marking with a permanent…

Print approx. €0.70–€0.86 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
155
Likes
34
Rating
5
P
PrintablesOsfald

UNI-T LM80 LM100 LM120 LM150 laser distance meter tripod mounting holder

I recently bought a UNI-T model LM100 laser distance meter. Unfortunately, this meter is not equipped with a thread for fixing it to a tripod. So I designed a suitable holder with 1/4" UNC thread which allows you to mount this meter on…

Print approx. €2.27–€2.77 excl. taxPreliminary estimate for one variant

Downloads
33
Likes
5
Rating
5
P
Printablesstegi

Prusa Mini Camera Mount Remix for Aukey PC-LM1E Webcam

This is a mount/adapter for the Aukey PC-LM1E Webcam, based on the Prusa Mini camera mount here: https://www.printables.com/model/142759-prusa-mini-camera-mount-remixed At first, I generated a holder with the OpenSCAD file, which turned…

Print approx. €0.48–€0.59 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
32
Likes
8
Rating
0
P
PrintablesDET-Man

CORE One Y-Axis Bearing Press Tool for LM10UU

This little tool helps you press LM10UU linear bearings into the aluminum housing on your 🥰 Prusa Core One's Y-axis assembly. It makes sure the bearings are fitted centered in the CNC machined housing. As you need to heat up the aluminum…

Downloads
1,243
Likes
33
Rating
5
P
Printablesstevehlau

Drylin Style Bushing RJ4JP-01-08 RJ4JP-01-10 (LM8UU and LM10UU direct replacement)

Original version is the exact same thing that you can download from IGUS website. I just enlarged the center hole for PLA printing. It should fit perfectly on a 8mm rod, at least for my MK2. V2 is the modify version from the original, I…

Downloads
925
Likes
74
Rating
4.8
P
PrintablesMrBojangles

LM8UU and LM10UU Lube Nozzle for Superlube

Nozzles to pack 8 and 10mm linear bearings plus caps

Downloads
804
Likes
165
Rating
4.92
P
Printablesuepsie

Grease / lube injector with cap for LM8UU / LM8 / LBBR (8mm) and LM10UU / LM10 (10mm) linear bearings

After producing quite a mess while trying to grease my bearings, I quickly designed this injector for LM8xx and LM10xx bearings which fits on the original SKF grease tubes. Just slide it in carfully, press and rotate the bearing - done…

Downloads
622
Likes
79
Rating
4.86
P
PrintablesHonza David

Prusa lubricant LM10LUU adaptor (Bearing pacifier)

This improved MK4 version has some new features you asked for - we found a few things we could improve, so we did, as we always do :-) Screw the printed tool on the Prusa Lubricant tube, carefully put the bearing on and turn it…

Downloads
545
Likes
68
Rating
5
P
PrintablesDockGuy

Super Lube 8oz v2 - improved linear bearing grease cap for LM8UU/LM8U and LM10UU/LM10U

Linear bearing grease cap for 8oz Super Lube Inspired by: https://prusacommunity.com/set-your-bearing-straight/ Improved version 2 adds these features: alignment notch so its easier to line up with the bearings tapered openings for a more…

Downloads
543
Likes
56
Rating
4.17
P
PrintablesJBoe

Lubricant LM10UU and LM10LUU adaptor for Super Synco Lube DE21030 with screw cap

Object description: Tools for lubricating LM10UU and LM10LUU bearings with a 85g tube Super Synco Lube DE21030 synthetic grease and a screw cap. The longer version for LM10LUU-bearings is available in two versions. Version 1 - with small…

Downloads
306
Likes
42
Rating
5
P
PrintablesFilip L.

Prusa Mini lubricant LM10LUU adaptor

The original adaptor for lm8uu including instructions can be found here . UPDATE - cover for adaptor added (fully compatible with original LM10UU version) - cleaning stick added for leftover lubricant to be removed

Downloads
301
Likes
27
Rating
5
P
PrintablesMikyner

LM8UU / LM10UU Linear bearings lubricator aplicator for luer lock syringe

Lubricant applicator for LM8UU / LM10UU linear bearings. Luer Lock syringe interface https://eshop.cbmedical.cz/diconex-jednorazova-strikacka-3-dilna--10-ml-luer-lock--sterilni/ Can be printed without supports.

Downloads
278
Likes
47
Rating
5
P
PrintablesKevin

LM10UU, LONG LM10UU (MK4 Z Rod Bearing), & LONG LM10UU CAP

Please try the original authors version before trying the altered version. I had a little trouble with the original 10mm diameter being a little too big, so I used some of the new features in PrusaSlicer 2.6.0 to change it up a little.…

Downloads
266
Likes
37
Rating
5
P
PrintablesTankerTech

Ryobi P306/RGLM18 Glue Stick Holder

General This is a remix but I ended up re-drawing it from scratch with that model as inspiration when I realized I wanted to change several things. Mine has smaller holes to accommodate my 6" long glue sticks which are 7mm in diameter…

Downloads
234
Likes
105
Rating
4.88
P
PrintablesBaGooN

X-axis linear rail upgrade and LM10LUU 10mm rod Z-axis for MK3S/ MK3S+/ MK3.5

This mod is a modification that incorporates X-axis linear rail upgrade and adapts MK4's 10mm rod X-axis parts and Z-axis parts to the size dimensions of MK3S, MK3.5. In addition to the difference in rod diameter of 10mm, there are other…

Downloads
202
Likes
63
Rating
4.83
P
PrintablesPred

MK4 x-end-clip for LM10UU or drylin RJUM-01-10

I have igus drylin bearings with the matching rods on my MK3S+ and now that the MK3.9 upgrade is on the way, I'd like to keep them and use it on the new Z axis rods. Unfortunately the elongated version is not available from Igus, so…

Downloads
189
Likes
6
Rating
5
P
PrintablesNekurok

LM8UU / LM10UU Lubricator for Luer Lok Syringes

Lubricant applicator for LM8UU / LM10UU linear bearings (8 mm / 10 mm nominal inner diameter). Luer / Luer Lok interface for syringes at the back. can be printed without supports. 0.2 mm layer height recommended for best printing of the…

Downloads
188
Likes
32
Rating
5
P
PrintablesJames J

LM12UU PTFE Linear Bearing

This is a LM12UU PTFE linear bearing based on romanz' LM10UU linear bearing. I.D. with PTFE Tubing: 12mm (nominal) I.D. without PTFE Tubing; 14mm O.D: 21mm at 4mm each end and 20.5mm in middle Length: 30mm Need 4mm O.D. x 2mm I.D. PTFE…

Downloads
162
Likes
17
Rating
5
P
PrintablesTom Johnson

Aukey Webcam Mount For Ender 3 S1 Pro (Aukey LM1E)

The model is designed to mount a Aukey LM1E webcam to the ender 3 S1 Pro. I have included the standard version of the model and a version where the mounting angle is more intense. The steeper model will point the camera angle further…

Downloads
127
Likes
14
Rating
5
P
PrintablesVOID

Charybdis PMW3610 LM18-LSI lens adapter

Adapter that secures the LM18-LSI sensor lens, for the PMW3610 sensor, when used with the original BastardKB Charybdis trackball assembly.

Downloads
126
Likes
17
Rating
0

LM10LUU SuperLube adapter remix (for Prusa Mini Z bearings)

Took the existing LM10UU adapter into Blender and extended the open area by 26mm.

Downloads
107
Likes
14
Rating
5
P
PrintablesNanodesigner

Cuscinetti lineari LM6LUU- LM8LUU- LME10UU- LM12LUU- LM16LUU- LM20LUU- LM25LUU- LM30LUU- LM40LUU- LM50LUU

Cuscinetti lineari serie lunga LM6LUU - LM8LUU - LME10UU - LM12LUU - LM16LUU - LM20LUU - LM25LUU - LM30LUU - LM40LUU - LM50LUU. Creati con solidworks con passaggio semplificato. per le misure complete consultare il file inallegato LM_LUU…

Downloads
105
Likes
5
Rating
0
P
PrintablesTim Ropp

Wall mount for Netgear LM1200 LTE modem

I wanted to mount my LM1200 LTE modem on the wall, but I hate the keyholes it has on the back. They're too small and require small screws. Instead, I made a quick model. This has two holes for screw mounting (and clearance between the…

Downloads
80
Likes
5
Rating
5
P
Printableskuhnikuehnast

Hypercube Evolution Z-Axis Ball-Screw Mount with LM12LUU Axis and rods

This is a remix for the Hypercube Evolution I created to fit Ballscrews for the Z-Axis. Z- Axis: I trimmed the Z-Carriage a little to give more space on the upper extrusions. I also redesigned the top Z-Brackets to use countersunk screws.…

Downloads
76
Likes
7
Rating
0
P
Printableskoenitec

LM10U Linearlagerböcke mit Sicherungsring

Als Ersatz für die schlechten Lagergehäuse und der Lager für eine billige CNC2418 damit nichts mehr hakt. Print Information: Printer: Prusa-Mini Filament: PRIMASELECT PETG Grey Nozzle: Bondtech 0.4 Layer high: 0.2 Infill: 60% cubic Rafts:…

Downloads
71
Likes
12
Rating
0
P
Printablesfaultedlogic

Bearing Carrier for LM10UU Bearing

In the process of upgrading the Y axis of my Anet A8 Plus from 8mm rods and bearings to 10mm rods and bearings, I needed carriers that mounted identically to the LM8 carriers, but would fit LM10 bearings. This is somewhat of a “quick and…

Downloads
70
Likes
6
Rating
0
P
PrintablesReva

LM10UU Lube injector

Adapter for the lubricate tube, you recive with your prusa for LM10UU insted of the LM8UU

Downloads
69
Likes
5
Rating
0
P
PrintablesDustmuffins

LM10UU and LM10LUU Extractor for SVO6 Plus and SV06 10mm Z rod mod

This is a larger design of LM8UU extractor for the SV06 that is designed to fit LM10UU style bearings. I recommend triangle infill. Instructions from original post: Print Settings Layer height 0.2mm Sturdier settings, e.g. 1.2mm walls and…

Downloads
68
Likes
17
Rating
0
P
PrintablesAakaar Lab

LMF12UU (convert your LM12UU Linear baring to Flange type)

Hai friends, This is my another small work to convert existing LM12UU linear bearing to LMF12UU using 3D printer. The design is quite simple and matches the exising LMF12UU dimensions expect the outer diameter of the LMFUU. However this…

Downloads
67
Likes
10
Rating
0
P
PrintablesAlex A.

LM10UU bearing housing

LM10UU bearing housing It was designed to be backwards compatible with SCS8UU. Use M4 screw nuts(there should be a tight fit). The bearing can be connected to the housing using an zip-tie. I suggest using 0.08/0.10 layer height, should…

Downloads
58
Likes
7
Rating
0
P
PrintablesJGFTW

LM10UU holder

The design is based on Prusa Bear Y axis bearing mounts. Its use case does not limit to Prusa Bear machine and even Y axis.

Downloads
53
Likes
4
Rating
0
P
Printableskaje

123A CR123A LM123A Mock/Model Battery

Note : 123A batteries may also be named as CR123A or LM123A. I made this print to use as a “stand in” battery for another project. As you can see from the included photos, the specified battery dimensions allow for some variations in size…

Downloads
52
Likes
3
Rating
0
P
Printablesmikrom

LM8UU / LM10UU Linear bearings lubricator aplicator for Microlube GL 261 (40g tube)

Printed from PLA at .15 and worked as expected. There is a sacrificial layer you must pinch with a screwdriver - therefore no supports needed.

Downloads
51
Likes
8
Rating
5
P
Printablesneutronned

Core One LM10UU Bearing Mount

I wanted to reuse the original LM10UU bearings from the MK4S on the Core One and designed this bearing mount. The outer dimensions are identical to the mounted bearings that came on the Core One with the exception of the clamping tab. The…

Downloads
50
Likes
12
Rating
0
P
PrintablesJur

HyperCube Z-carriage and clamps for LM12LUU and LM12UU bearings and 12mm rods Clamp

HyperCube Z-carriage and clamps for LM12LUU bearings and 12mm rod clamps. Added carriage for LM12UU. can use the normal clamp. Print Settings Printer: Hypercube Rafts: No Supports: No Resolution: 0.2 Infill: 40% Category: 3D Printer Parts

Downloads
48
Likes
4
Rating
0
P
Printablesdturak

CX80 - LM8UU and LM10LUU Bearing Lubrication adaptor

LM8UU & LM10LUU Bearing Lubrication Adapter 🔧 A simple and practical lubrication adapter for LM8UU and LM10LUU linear bearings , designed to make applying lubricant quick, clean and precise. The adapter allows lubricant to be delivered…

Downloads
46
Likes
5
Rating
0
P
PrintablesShorco

Gridfinity Bosch GLM165-40 laser measure holder with tether slot

Gridfinity organizer for the Bosch GLM165-40 with a slot to hold the tether

Downloads
43
Likes
7
Rating
0
P
Printablesjuha_j

SC10UU / LM10UU bearing block

This is replacement to aluminum bearing block. I used these on heated bed movement, with printed blocks you can reduce 160 grams of moving mass. Bolt grid matches on Reprap Trespa carriage plate sod here:…

Downloads
42
Likes
3
Rating
0

generative z slider for railcore mini with lm10uu (2 versions)

There are two versions available a 19.00 mm and a 19.05mm bore. Try the 19.00mm bore first and if you're able to press the bearings in (they will be tight as this is likely an interference with how printers work) go with that if it is…

Downloads
38
Likes
7
Rating
0
P
PrintablesFilagain

CUT LM10LUU TO LM8LUU BEARING ADAPTER

Ever print some mechanical parts and only later realized that it requires LM10LUU bearing and not LM8LUU ones you had prepared? This might be useful for you. An adaptor to fit LM8LUU bearing (dia. 15mm) to fit on LM10LUU (dia. 19mm) slot.…

Downloads
35
Likes
2
Rating
0
P
PrintablesDavid Kahler

Netgear LM1300 LTE modem rack mount

Rackmount for LM1300 LTE bridge using the esrack system

Downloads
31
Likes
2
Rating
0
P
PrintablesiFimo

spy protection Aukey_PC-LM1E Webcam

Spy Protection Flap for Aukey_PC-LM1E webcam. For mounting the door on the frame, u will need a splint made of a cheap Paperclip. Cut that paperclip intro 2x 6mm straight pieces and insert them vrom both sides. Alternatively, it can also…

Downloads
30
Likes
5
Rating
0
P
PrintablesPrzemek Grondek

CX-80 Lubricant adapter for LM10LUU

Adapter for CX-80 for LM10LUU bearings in Prusa Mini/MK3.9/MK4 Printed in PET-G, Layer Height 0.2mm Remix of CX-80 lubricant adapter for LMU08

Downloads
28
Likes
1
Rating
0
P
PrintablesPlexi

HyperCube LM10UU Z Axis Carriage

I remixed the original Z axis carriage to add longer arms and an additional set of holes. I also opened up the bearing location by 0.1 mm. Clamps and Bearing Rod Supports are the same as the original design but presented here for…

Downloads
27
Likes
3
Rating
0
P

Mount for LM12UU V2 (Shorter Z)

used in anycubic kobra 2 neo DIY liner rod

Downloads
25
Likes
1
Rating
0
P
PrintablesiGoX

Aukey LM1 WebCam holder for Ender 3 (Z-Axis) - 2025-01-16 v2

Hi, 2025-01-16 UPDATE v2 I totally reworked the attachments between the parts. Instead of relying on solely 2x2mm diameter cylindric plugs, there's now much more stronger rectangular bounds. You can easily put cyanoacrylate glue in the…

Downloads
22
Likes
0
Rating
4
P
Printables123Dprint!

Aukey PC-LM1E Webcam Mount for Articulating Camera Mount

This is a combination of the Rasperry Pi Camera ball joint adapter and the remixed part for the affordable Aukey PC-LM1E

Downloads
22
Likes
3
Rating
0
P
PrintablesPhailboy

LM15-350 air filter compressor cap

Cap which houses the airfilter for an LM15-350 compressor. I printed this in colour changing PLA, infill of 15%. The original cap broke quite soon after purchase so I added a version which has a thicker top plate. It might need a…

Downloads
22
Likes
2
Rating
0
P
PrintablesMarsell Walis

The cutting blade disc of the NAC RLM1800G2-T robotic mower

The mowing robot in my garden has difficult working conditions ;) From time to time it smashes the blade discs on a root, curb or a stick, or simply breaks the blade from the socket. Instead of buying a new blade disc from NAC, below is a…

Downloads
21
Likes
2
Rating
0
P
PrintablesVico Günther

Case for Four PS-BLM1 Camera Battery

This is a practical case for 4 PS-BLM1 batteries, for example, for the Olympus E-500 and other camera systems.

Downloads
20
Likes
0
Rating
0
P
PrintablesMarsell Walis

Front wheel robotic lawn mower NAC RLM1800G2-T Robomower

A replacement for the front wheel of the mower. Designed to work with two 608ZZ (8x22x7 mm) bearings, I used an 8mm rod and two nuts as the axle. Two spacers will also be useful to prevent the wheel from slipping on the axle, I used two…

Downloads
20
Likes
1
Rating
0
P
PrintablesHans

PC-LM1E Webcam Case and Holder [Rook 2020 MK2]

I made a case and holder for the cheap Aukey webcam PC-LM1E. The webcam costs only 15 € in Germany and has a quite decent image quality. I am very happy with it. I didn't liked the big original case with a lot of air in it, that's why i…

Downloads
20
Likes
6
Rating
0
P
PrintablesGherebean

La Marzocco LM1 Funnel and Tamp expander

I think a lot of people bought this La Marzocco single shot basket after Lance Hendrick posted about it. It really is quite nice but I didn't want to spend more on accessories like tamps and funnels as I did on the portafilter basket…

Downloads
19
Likes
3
Rating
0
P
PrintablesScarecrow

LM12LUU Holder for Anet

LM12LUU Holder for Y carriage or whatever. Simple clip on fit over the bearing. Holes are spaced 24mm on center for M4 nuts and screws. Print Settings Printer Brand: Prusa Printer: I3 MK3S Rafts: No Supports: No Resolution: 0.2 Infill: 20…

Downloads
18
Likes
0
Rating
0
P
PrintablesDiscoDed

LM8UU with LM10UU outer diameter

I needed it to build a Frankenstein bedslinger out of my printer graveyard's parts… well, it works well!

Downloads
17
Likes
2
Rating
0
P
PrintablesFederico9292

LM10UU-10i-12.3o

Customized version of http://www.thingiverse.com/thing:120441 Created with Customizer! http://www.thingiverse.com/apps/customizer/run?thing_id=120441 Instructions Using the following options: outer_diameter = 12.3 split_bearing = No…

Downloads
17
Likes
0
Rating
0
P
PrintablesMarsell Walis

Front bumper robotic lawn mower NAC RLM1800G2-T

I designed a new, more solid front bumper. In this model, the front case likes to crack from constant impacts. Post-Printing Category: Outdoor & Garden

Downloads
17
Likes
0
Rating
0
P
Printableswolfone

Netgear LM1200 Case/Shell

Made this based on my NRadio enclosure to allow for some airflow and mounting options for modems in my belabox IRL backpack. Printed in PETG with .6mm nozzle Board is press fit, and case is sealed with 4 M3 screws, optional 30mm fan…

Downloads
17
Likes
0
Rating
0
P
PrintablesRadek Fryšták

Interior - calm1936

TT interier - calm Category: Models

Downloads
16
Likes
2
Rating
0
P
Printablesjandi

Webcam holder and arm for Original Prusa - Aukey LM1E Adapter

This is an Adapter to mount a Aukey LM1E Camera to the following webcam arm: https://www.printables.com/model/53393-logitech-c270-webcam-holder-and-arm-for-original-p It propably also works with all other cameras that have a M6 thread.…

Downloads
15
Likes
3
Rating
0
P
PrintablesFoden

HEVO Y_Carriage_(v1.3) xDia8_LM8UU / xDia8_LM10UU / xDia10_LM10UU

This is based off Scot 3D's HEVO design Nut and bolt sizes are M5 not M3 - sorry I'm not a fan of the brass inserts so replaced them with nuts Have not printed this set out yet, waiting to complete my HEVO This version has replace all the…

Downloads
15
Likes
2
Rating
0
P
PrintablesRCFD

LM10UU bearing brace

Soft mount with zip ties for a LM10UU brace below a heated bed

Downloads
14
Likes
6
Rating
0
P
PrintablesMarco

Cutting rotor 6 blades NAC RLM1800G2-T

Material PET-G, infill 5%, modyficators infill 20%.

Downloads
14
Likes
2
Rating
0
P
PrintablesFurkan Basoglu

Rostock Carriage (LM12LUU) long version

Center to center 60mm. M5 and M3 screws and nuts needed. Suitable for LM12LUU and LM12UU Print Settings Printer: Rostock Rafts: No Supports: No Resolution: 0.3 Infill: 30-40 Filament: Uzaras3D PLA+ Category: 3D Printer Parts

Downloads
14
Likes
1
Rating
0
P
Printablesdiegotrap

Hypercube LM10LUU Z carriage

Z axis carriage substitute for using LM10LUU (long, 10mm linear bearings) in the Hypercube 3D printer. Use it in conjunction with this 10mm Z axis mod: http://www.thingiverse.com/thing:1950819 Category: 3D Printer Parts

Downloads
13
Likes
1
Rating
0
P
PrintablesiGoX

Aukey LM1 webcam mount for Artillery SideWinder X2

HI, I created this very basic webcam mount to hold my cheap Aukey LM1 webcam on top of my printer and monitor my prints. 1-2-3 easy peasy steps: Print Attach the webcam to the mount with zip ties Insert the webcam mount into the slot at…

Downloads
12
Likes
0
Rating
0
P
PrintablesDan Pinkard

LM12UU to LMH12UU Adapter

When you have LM12UU bearings but wish you had LMH12UU bearings, this solves your problem. You could replace the inset nuts with heated press inserts, but these work better under compression so the hex nuts are recommended. Fits M3 screws…

Downloads
10
Likes
2
Rating
0
P
PrintablesFoden

HEVO Y_Carriage_(v1.2) xDia8_LM8UU / xDia8_LM10UU / xDia10_LM10UU

This is based off Scot 3D's HEVO design Nut and bolt sizes are M5 not M3 - sorry I'm not a fan of the brass inserts so replaced them with nuts Have not printed this set out yet, waiting to complete my HEVO

Downloads
10
Likes
1
Rating
0
P
PrintablesNikki81

E3D v6 LM12UU x carriage

LM12UU x carriage for a E3D v6 hotend and a 18mm dia inductive/capacitive proximity sensor I HAVE NOT YET TESTED THIS DESIGN Category: 3D Printer Parts

Downloads
9
Likes
1
Rating
0
P
PrintablesPanPiotrAdamus

Rook MK1 Mod for LM10LUU bearings

This mods accepts very same priting and assembling instructions as the original Rook MK1. Instead use 10mm linear rods and LM10LUU bearings.

Downloads
8
Likes
1
Rating
0
P

Mount for LM12UU

Can be used for Y axis bed

Downloads
7
Likes
0
Rating
0
P
PrintablesZbyněk Král

Linear Bearing Cleaner (LM10LUU)

Among the regular maintenance tasks for a printer is the lubrication of its linear bearings. However, before applying new lubricant, the bearings should be thoroughly cleaned. This will remove old grease and any potential contaminants.…

Downloads
7
Likes
3
Rating
0
P
PrintablesJudicibus

Centauri Carbon Mornsun LM150

Ive laying around a Mornsun PSU and want to switch the one that came with my printer and make a wisssss sound. Before explode ( joke ), I decide to switch. The new one is smaller, yet have more power, and some sources indicate that…

Downloads
7
Likes
3
Rating
0
P
PrintablesQidi q2

Lüfterhalter für 120mm Lüfter Lüftungsgitter LM100 Wohnmobil Hymer Wohnwagen

Lüfterhalter wird in den rahmen eingehängt man braucht min 120mm abstand zum lüfter.Waagerechtereinbau Lüsterklemmen halter für 4qmm klemmen

Downloads
6
Likes
0
Rating
0
P
PrintablesDahliamoth

Sun Joe 24V-CRLM15 Mower Height Adjuster Arms

Reverse engineered a replacement for a coworker's broken lawn mower. Seems that this part is unavailable from the manufacturer as a replacement and looks like it's only used on this one model. The original part is PA6-GF, but I think that…

Downloads
5
Likes
0
Rating
0
P
PrintablesLucas

Lineair slide bearing for Leapfrog Creatr Y-axis. Uses IGUS GSM-1214-15 bearing sleeves to replace LM12UU

LM12UU are round but the space they fit in on a Leapfrog Creatr is square, so these replacements are square. They print in 2 halves. IGUS GSM-1214-15 should fit between 2 of these halves without pinching it against the axle. It should…

Downloads
1
Likes
0
Rating
0
P
Printables

Lüfterhalter für 120mm Lüfter Lüftungsgitter LM100 Wohnmobil Hymer Wohnwagen

Lüfterhalter wird in den rahmen eingehängt man braucht min 120mm abstand zum lüfter.Waagerechtereinbau Lüsterklemmen halter für 4qmm klemmen