Counting matching models…
Simple tool for lubricating LM8UU bearings. Print instructions New version! We found a few things we could improve, so we did, as we always do :-) Screw the printed tool on the Prusa Lubricant tube, carefully put the bearing on and turn…
Purpose: Tool for lubricating LM8UU bearings with a 85g tube Super Synco Lube DE21030 synthetic grease and a screw cap. Are you looking for the same tool with screw cap for the original prusa grease tube? Look here:…
Original version is the exact same thing that you can download from IGUS website. I just enlarged the center hole for PLA printing. It should fit perfectly on a 8mm rod, at least for my MK2. V2 is the modify version from the original, I…
Replacement Linear Bearings for 8mm rods of Prusa printers Minimal friction surface Clean outside, no grooves or logos Print time: 39 minutes No support 0% infill The 3D Models found online where pretty low-poly and had other features I…
Nozzles to pack 8 and 10mm linear bearings plus caps
After producing quite a mess while trying to grease my bearings, I quickly designed this injector for LM8xx and LM10xx bearings which fits on the original SKF grease tubes. Just slide it in carfully, press and rotate the bearing - done…
As those that can be found on the net Print Settings Printer: JGAurora a5 Rafts: No Supports: No Resolution: 0.1 Infill: 20% Filament: Generic PLA Category: 3D Printer Parts
Other LM8UU bearings are modeled without much thought put into how the part will be printed. I modeled each of these to be printed with a their corresponding nozzle size using no infill, no top and bottom layers, and a wall line count of…
Linear bearing grease cap for 8oz Super Lube Inspired by: https://prusacommunity.com/set-your-bearing-straight/ Improved version 2 adds these features: alignment notch so its easier to line up with the bearings tapered openings for a more…
The applicator end is unmodified. Threaded end is enlarged and modified to have a 9/16-16 UN thread to fit an 85g Super Lube tube. Note: the thread dimensions were found by trial and error, so might not be exactly right, but seem to fit…
A Cap for the "Prusa lubricant LM8UU adaptor" Designed by Honza David. This is ONLY the Cap, for the adaptor check out David Honza´s Design. It is a loose fit . If you want it to be tight scale in down in the slicer. “With some trial and…
All printable parts for your RepRap Prusa Mendel i2. Source: https://github.com/josefprusa
A simple remix of the MKII applicator for superlube tubes. Like the MKII simply insert and then twist until resistance and then apply the lubrication. Use the lid to cap off the applicator end.
Little helper to inject grease into Misumi LM8UU and LMU8 bearings. The injector is designed to fit Nigrin 74145 multipurpose grease, which is one of the recommended lubricants for mentioned linear bearings. The thread size is M24 x 3 I…
This is a remix based on the two models https://www.thingiverse.com/thing:3440524 (base for the thread) https://www.prusaprinters.org/de/prints/32359-prusa-lubricant-lm8uu-adaptor-bearing-pacifier (adaptor) For a detailed instruction for…
Lubricant applicator for LM8UU / LM10UU linear bearings. Luer Lock syringe interface https://eshop.cbmedical.cz/diconex-jednorazova-strikacka-3-dilna--10-ml-luer-lock--sterilni/ Can be printed without supports.
Object description: Tool for lubricating LM8UU bearings. Since many people ask for a screw cap in combination with the bearing pacifier from David Honza, here it is. Handling Instruction from David Honza (nothing to add from my side):…
Modified to fit the super lube grease threads a little better and fit the LM8LUU. Print Settings Printer Brand: Creality Printer: Ender 3 Rafts: No Supports: No Resolution: 0.2 Infill: 20% Filament: Prusament PLA Category: 3D Printer…
I had bunch of CRC grease tubes in garage, and wanted to design LM8UU bearing greaser nozzle with caps, so you can keep them even in your home office drawer without cleaning them. Nozzle screws into 100 ml CRC grease tube. Top cap seals…
LM8UU lubricant adaptor (Bearing pacifier) based on the model from Ri3del that incorporate a cap over the injector when in storage. My remix is to implement an injector that locks into each bearing similar to the Prusa supplied bearing…
LM8UU Housing for Y-carriage MK3/S/+
This model has been adapted for Lucas White Lithium grease 8oz which is pretty common in US hardware stores. It has a cap so you can leave it on the tube and a plug so you can seal those thing up when removed. No supports needed.
Remix of the excellent tool by @aldabest with a longer rod so it can remove both bearings on the Y-axis mounts on the Sovol SV06. Print Settings Layer height 0.2mm Sturdier settings, e.g. 1.2mm walls and stronger top/bottoms, 20% infill…
Experimental floating LM8UU linear bearing mount using printed leafspring for stabilization. My stock Anet a8 linear bearing has a grinding problem that leaving a pixie dust on the linear rods that after a few hours of printing, replacing…
Lubricant applicator for LM8UU / LM10UU linear bearings (8 mm / 10 mm nominal inner diameter). Luer / Luer Lok interface for syringes at the back. can be printed without supports. 0.2 mm layer height recommended for best printing of the…
Após algumas pesquisas decidi-me por fazer a minha própria peça. O ficheiro STL já tem a tolerância de 0,2 para ficar com o diâmetro interno de 8mm e externo de 15mm. Basta fazer o slicing com as definições a baixo e deve sair tal como a…
Instead of using two LM8UU bearings on the top X-rod, the carriage parts have been changed to make use of a single LM8LUU/LMUW8. A more cost-effective and overall "better" solution. A single Misumi LMUW8 costs less then two LMU8's. Plus…
One of the original bearing holder of my Anet A8 broke, so I printed this replacement. The bearing holder from https://www.thingiverse.com/thing:2791727 was quite similar but I had to modify some small details to make it fit.. Print…
Print settings: Material: PLA. Resolution: 0,15mm Infill: 100% Perimeters: 2 Brim: no Support: no
Hello everyone! I'm bad at modeling! I threw together yet another grease applicator, but this one has a 90 degree bend so there's no need to remove the bearings from the Y-carriage to reapply lubricant. For 8mm bearings, 3oz / 85g Super…
Printable bearing carrier for 3D printer or CNC. This is modeled after the aluminum bearing carriers for the 8mm bearings with a 15mm outer diameter that shipped with the original Anet A8 and many other 3D printers. When I bought my Anet…
Use this simple tool to accurately mark each LM8UU or LM10LUU bearing in your next build with a permanent marker for precise alignment every time. Prep Clean off the oil film on the outside of the bearings before marking with a permanent…
Hi! There are plenty of presses, but I wanted to create one based on linear rods since I had some spare ones. Hardware required: 4x M3x12 screws (M3x10 work well too) 4x M3x36 screws or 4x M3x20 screws (depending on version) 4x LM8UU…
First idea was to create a thread in adapter but this one is much simpler…
Disclaimer: it's a really minor modification, but this is untested . I haven't put this to use myself (I went straight to a 10mm Z-axis in my upgrade/mod-endeavors). Instead of using two LM8UU bearings in the X-ends, the X-ends have been…
LM8UU housing for BLV MGN12 MOD MK52 carriage. Screw holes spacing is 20x20mm. Print Settings Printer: whatever Rafts: Doesn't Matter Supports: No Resolution: 0.2 Infill: 20 Filament: whatever PETG, ABS, ASA whatever Category: 3D Printer…
i only tested the fit in my syringe but didnt test the real application. I can't rule out that it won't work (could be too much pressure on the threads while pushing).
Had my own grease in the box and only one syringe on hand, so i remixed it to fit the syringe.
Designed to fit the Sovol SV06 platform to elevate and strengthen original injection molded parts. This set stiffens and tightens the rod tolerance as well as offer a more refined version of the original parts. This elevates the build…
A simple axial bearing dummy for help on your creation needs. Category: 3D Printer Accessories
Cuscinetti lineari serie lunga LM6LUU - LM8LUU - LME10UU - LM12LUU - LM16LUU - LM20LUU - LM25LUU - LM30LUU - LM40LUU - LM50LUU. Creati con solidworks con passaggio semplificato. per le misure complete consultare il file inallegato LM_LUU…
It was recommended that there should be a space in between 2 of the bearings on both left n right Z axis. As many know that the fitting is super tight, and therefore its a lot of work just to make a space in between. So i decided create a…
The creator assumes no responsibility for any damage or accuracy that may occur. All work is carried out at your own risk. This guide is not a recommendation but only describes how the author uses the process for himself. My process was…
Imprimir en PETG, ASA, HIPS o ABS, usar un relleno del 50% y altura de capa de 0'2, no son necesarios soportes
Image is of the raised by 5mm block. This is a remix of models of the LM8UU bearing and block. Rather than print them separately, and have the problem of sanding and fitting and tolerance etc. I combined them into one object. Also…
I wanted to upgrade my LM8UU to IGUS Drylin. First attempt was to just swap LM8UU in the existing aluminium SC8UU by IGUS Drylin RJ4JP-01-08. Result was a lot of bearing clearance. According to datasheet, the IGUS drylin bearings need to…
This is a remix of the LMU Bearing Grease Packer with a nut on the end to firmly hold the bearing while packing it with grease. While I liked the design, I had some frustration with the 4mm thread, finally cross-threading it. I copied the…
This is a tool designed for removing the LM8UU bearings from the Prusa MK3(S)(+) z-axis. Reduces the chances of damaging the bearing because of the flat surface used to push on the bearing. Print in PLA or PETG.
After looking around, I could not find the right linear bearings for my Anet A8 Clone, so I designed my own. these work great with https://www.thingiverse.com/thing:2640562 as the bearing holder. I Hope you find them useful! Print…
este bloque esta diseñado para el rodamiento lineal LM8UU, para sujetar la base movil de el eje "Y". Si bien se puende adquirir unos rodamientos SC8UU que ya biene totalmente hecho para ensamblar la base movil sobre ella, pero, tenemos…
This is a hybrid of Lubricant LM8UU adaptor for Super Synco Lube DE21030 with screw cap and Linear Bearing Greasing Cap for 12g Super Lube Tube . I wanted to screw on the popular 20130 (85gr) adapter/cap on to a 21014 (12gr) tube, because…
Remixed from the Zaribo design - using common DIN 912 M3*16 screws and nylon locking nuts instead of square nuts Print: PETG 0,20 Infill 10-20% no supports needed What you need: 6x M3*16 DIN912 screw (2 per bushing) 6x M3 nylon locking…
Grease injector for standard LM8UU and the longer LM8LUU linear bearings with M15 thread. Fits on LiquiMoly LM47 tubes for example.
I tried to remix something in case of my need but it won't work for me. Anyways i designd my own one in Fusion360 for a german syringe seller (Braun) This is a little helper to lubricate your Original or Misumi LM8LUU bearings. You need:…
Prusa I3 Steel LM8UU Bed holder
have spare lm8uu? recycle them in a spool holder. i designed this as an exercise for a future spool holder. but i noticed that it runs perfectly. 2 frames, monolithic (not yet printed) and divided in four pieces, basements and rod…
This is a grease injector for LM8UU/LMU8 linear bearings. It fits the Nigrin 74145 multipurpose grease with a M24x3 thread on its tube. This is the grease I use for my bearings which is easy to get and quite cheap in Germany. Support is…
Printed in PLA with 3 wall loops, 3 top and bottom layers. 15% infill Needs 1x M3x16 Socket head screw and 1x M3 nut They are this tall because my Leadscrew is too short EDIT: lengthened clamp edge by 2mm to stop the captive nut from…
WARNING This carrier works exclusively with the Cordobesa this is a modified version of toolsons mk2 x carrier for 4x LM8UU Bearings, stretched 1mm, to fit on the cordobesa X axis Print instructions Category: 3D Printer Parts
A simple tool to press bearings out of (and back into) mounts, housings, etc. I needed to replace one of the X-carriage mounts on my A8 to accommodate a replacement idler pulley that was wider than the original; this made quick work out…
Adapter to fit grease tubes with M10 thread. Specifically Permatex 80345 White Lithium Grease.
I'm building a Hypercube Evolution with a Prusa MK52 Heated bed. Trying to use the new Prusa MK3 design that has the cables neatly tucked away. I mashed together the Hypercube and Prusa X-Carriages together but had to widen the carriage…
Printed from PLA at .15 and worked as expected. There is a sacrificial layer you must pinch with a screwdriver - therefore no supports needed.
WARNING This carrier works exclusively with the Cordobesa this is a modified version of toolsons mk2 x carrier for 2x LM8LUU Bearings, stretched 1mm, to fit on the cordobesa X axis Print instructions Category: 3D Printer Parts
If you want to take this thing off the tube and prevent the remaining lubricant from getting everywhere, now you can! Just use this bottom cover, together with the top one and keep the remaining lube contained. The model has a lip around…
Being in the US I have an abundance of US size hardware but everything on thingiverse is in metric (which is honestly superior). Since i already have US size hardware and the ability to modify the parts I print it is a lot cheaper to make…
Remix of Float LM8UU bearing mount for Anet a8 by ksdj55 : https://www.thingiverse.com/thing:3601845 I've added holes for straps and seats for M4 nuts also works on the Anet A8+
LM8UU & LM10LUU Bearing Lubrication Adapter 🔧 A simple and practical lubrication adapter for LM8UU and LM10LUU linear bearings , designed to make applying lubricant quick, clean and precise. The adapter allows lubricant to be delivered…
New LM8UU Bearing Holder for the Bet Print Settings Printer: Prusa I3 Rafts: Doesn't Matter Supports: Doesn't Matter Infill: 25-40 Category: 3D Printer Parts
X back plate for the MZ76v2 to use Lm8Luu Bearings (45mm) I printed in ABS and removed the square nuts to use 5 m3 heat set inserts with 4mm od's Print Settings Printer Brand: Prusa Printer: Prusa Clone Resolution: .2 Infill: 25 Filament:…
I created this to pull the lm8uu linear bearing out of the carriages on my Monoprice Mini Delta. It also worked well to seat the new bearings by pulling them in. It will probably work for other configurations using lm8uu linear bearings.…
I made this so that I could better use plastic bushings on the bed of my Tronxy P802E instead of the noisy ball bearings. If plastic bushings are misaligned slightly they will bind and cause motor skips and getting them aligned can be…
bearing holder for 8mm linear bearing (LM8UU)
Basic block to add tension to igus bearing, prolonging viable lifespan, and reducing play. Work in progress, I haven't actually printed this yet. Too many projects, so little time. I'm printing up yet another emt8 out of petg and will get…
Inox MX6 LM8UU Grease Applicator – Bearing Pacifier Adaptor A grease applicator ("bearing pacifier") for LM8UU linear bearings , modified to thread directly onto an Inox MX6 30 g grease tube . Slip the LM8UU over the nose, give the tube a…
Adaptador LM8UU LM8LUU a casquillo de 14 12 8 LM8UU LM8LUU adapter to 14 12 8 socket Print instructions Este fichero no lo he impreso todavía. Mi recomendación sería usar boquilla de 0.4 y 0.1 en altura de capa sin soportes. I have not…
Klüber Microlube GL 261 (40g tube) LM8UU applicator needs supports
Improvement of http://www.thingiverse.com/thing:19127 Optimized SCAD Code Dimensions for Prusa Mendel Y Axis Instructions Read http://www.thingiverse.com/thing:19127 for instructions I just added the requested sub-frame for the screws and…
I found that the LM8UU bearings would wobble in the factory pillow block due to their being too much play in the bearings. I created a design that will hold the bearings in place much better and gives a tighter fit and has eliminated the…
This is a remixed version that works on Prusa i3 MK3 bed carriage and probably also for the MK2 bed carriage. EDIT: I personally really like these printed bushings from @aeropic : https://www.thingiverse.com/thing:2537701 Which need a…
Could use for LMU8 and same diameters bearings. Nice fitting for 10x bearings. Ease to print, easy to use. Safes fingers and bearings for damage. Please use PETG because of the use in isoprop. alcohol. Works nice. If you want to clean the…
LM8UU bearing object with exact dimensions for prototyping and mockups Category: 3D Printer Parts
This allows you to utilize your grease gun to grease the bearings on the prusa rather than buying the .5 oz packs from prusa. I printed this in ABS with a 10mm brim. No supports needed. The bottom collar has a spot for an O-Ring, though…
The necessary configuration changes to make one that fits round an E3D all metal hot end. Because someone requested it. Print instructions Category: 3D Printer Parts Summary The necessary configuration changes to make one that fits round…
Ever print some mechanical parts and only later realized that it requires LM10LUU bearing and not LM8LUU ones you had prepared? This might be useful for you. An adaptor to fit LM8LUU bearing (dia. 15mm) to fit on LM10LUU (dia. 19mm) slot.…
M8x1 fitting adaptor for use with professional grease guns - for 8mm linear bushes like LM8UU
I recently bought a UNI-T model LM100 laser distance meter. Unfortunately, this meter is not equipped with a thread for fixing it to a tripod. So I designed a suitable holder with 1/4" UNC thread which allows you to mount this meter on…
Um die Linear-Kugellager frisch zu schmieren, verwende ich eine Einhandfettpresse. Diese Einhandfettpresse während der Pressung zu halten und das Lineargleitlager gut zu positionieren ist eine Kunst für sich, somit ist mit diese Lösung…
This is an extended version of the scarou's LM8UU bearing mount. This version is extended by 10mm to accommodate for big couplers on the Z axis. Print Settings Printer Brand: Prusa Printer: Prusa Clone Rafts: No Supports: No Resolution:…
This is a long bearing holder that can be mounted with four screws with standard spacing. It can take two bearings but only needs one set of mounting holes. This should also ensure that two bearing are perfectly aligned with each other. A…
Built this for my Bosch GLM 80 laser distance measurer, might fit other models too. Press a ¼"-20 nut into the base to make it compatible with any standard “photo” mount monopod. Set your monopod to a known height - 4'-0" works well.…
I took the linear bearings out of my ender 3 v3 se bed since I upgraded to the linear rail y-axis. I printed this in PLA since I ran out of PETG. Dimensions seem to be correct at least with my print settings and filament. I’m probably…
lm8uu bearings are 8mm at center. 24mm long, 15mm wide
con questo pezzo ho potuto mantenere i cuscinetti sotto al letto riscaldante avendo una maggiore stabilita
Got sick of the low quality stock SV06 bearings, so purchased some sintered brass bushings to replace them. These need a shell to adapt to the LM8UU cavity. This is printed in halves, the bushing inserted and then the other half pressed…
Linear bearings for the CTC i3 Pro. The LM8UU with the 5mm bed, holes 32mm separation. The LM8LUU is modified a bit as well. The rails have a gap on the middle to avoid pivoting and friction reduction. Category: 3D Printer Parts
This bearing block mount is designed to use LM8UU bearings secured using cable ties. The mount can be used as a replacement for the Sunhokey Prusa i3 2015 small bearing blocks. (Imported from Thingiverse. Originally published: 23 Sep…
The original Plastic bearing did not work very well in my place. So i got it working with LM8UU Bearings instead. But two pieces need a replacement. You need 1x drawing_machine_y_end2_v3.stl 1x drawing_machine_z_stage_face_v3.stl 2x LM8UU…
Fair warning: I found this thing quite sensitive to changes in bed temperature, I guess the Y carriage warps somewhat as it gets heated by the bed. I'm now using an alternate mounts that's a bit, but not a lot better. A mount for the…
![Sovol SV-06 Reinforced Y-Axis Components (+7mm Elevation) [LM8UU Set]](https://media.printables.com/media/prints/727854/images/6385196_83479a1d-618a-4456-956d-4c8a23418ad7_6dcc93ad-97be-4526-b501-dcebaeabd34b/20240303_143619.jpg)
