747 models
This is to help you get that perfect first layer and determine where you need to make adjustments on your 220x220 bed. The Model is pre-offset in slicer will print perfectly aligned with 220x220 build plate. Run Brim test first to dial in…
Print approx. €0.05–€0.06 excl. taxPreliminary estimate for one variant
I made this dock for my Apple Watch Series 4 with 44mm and it fits like a charm. I also tested it out with the 40mm version (3rd image) and it also fitted very good. It also fits all other Apple Watches (also Ultra), cause the format…
Print approx. €3.36–€4.10 excl. taxPreliminary estimate for one variant
This is my Travel Soap Box. This has been tried and tested on many of my travels by both myself and my son. The pictures are of my actual well travelled Soap Box, over 2 years old now. The box holds a full normal size bar of soap, the…
Print approx. €1.88–€2.30 excl. taxPreliminary estimate for one variant
Motivation I recently purchased a P2 Laser Cutter and AC Infinity 6” Inline Duct Fan intending to attach 4” ducting to the inlet side. But the outlet of the P2 was too small for 4” ducting. Additionally, the weak stock internal fan would…
Print approx. €1.73–€2.11 excl. taxPreliminary estimate for PETGSource material: PET
Recommended print settings: Material: PLA Layer Height: 0.10 Infill % : 15+ Supports: No Print Orientation: Flat side down Vectors image by SVG Repo : https://www.svgrepo.com/svg/477542/pointing-glove
Print approx. €0.37–€0.45 excl. taxPreliminary estimate for one variant
Test your bridging/cooling settings! Check if your bed adhesion is good enough for small footprint parts. Prints in minutes and uses less than 1 gram of filament. Category: 3D Printing Tests
Print approx. €0.07–€0.08 excl. taxPreliminary estimate for one variant
Edit 9.8.2024: One of the screw tabs of my holder snapped, so I uploaded a more reinforced one that should definitely last without issues, also added a cutout for tightening the bottom screw after deciding it wouldn't look that bad after…
Print approx. €4.30–€5.25 excl. taxPreliminary estimate for one variant
This is built around standard outdoor North American outlets and is meantmeant to protect the outlets from excessive damage from the elements. The screw holes are 0.9cm in diameter. IfIf you have any questions or concerns, please feel…
Print approx. €7.44–€9.09 excl. taxPreliminary estimate for one variant
𓊍 THE HARMONY CODEX I came here searching for something But I don't remember what that thing is anymore Did I dream you? Or are you dreaming me now? I love Steven Wilson's music, and so I created a set of 3D printable abstractions to…
Print approx. €0.71–€0.87 excl. taxPreliminary estimate for one variant
I searched for an enclosure for my MC 1022 but found nothing, inspired by Vienna3D's Case for the MC 102 ( https://www.thingiverse.com/thing:4292874 ) After making this, I wanted it to stand on my Desk and get the cables somewhat sorted…
Print approx. €4.46–€5.45 excl. taxPreliminary estimate for PETGSource material: PET
For one of the pictures I used Crealty Hyper White. For the more defined white I used eSUN PLA Basic Cold White. Approximate TDs: Crealty: 7 eSUN:3 Swap Instructions: Start with Black At layer #8 (0.72mm) swap to Purple At layer #13…
Print approx. €2.81–€3.43 excl. taxPreliminary estimate for one variant
The Remote Learning Tower allows remote homework with a smartphone and wifi/mobile data. Executive summary: The Remote Learning Tower hold a smartphone that will stream like a videocall the desk area from above. With the loudspeaker…
Print approx. €7.43–€9.09 excl. taxPreliminary estimate for one variant
🌌 THE OVERVIEW I incline myself to space There was no ghost on the moor No open window No monkey's paw I love Steven Wilson's music, and so I created a set of 3D printable abstractions to represent his discography. This can be used as a…
Print approx. €0.29–€0.35 excl. taxPreliminary estimate for one variant
Just another impossible spiral design. I wanted an hourglass style cone and a longer one so drew normal hourglass cones and pyramids as well as dubbel length versions ;-) I'd love to see some makes ;-) Printer settings I used: PETG 0.4mm…
This is the first of four Cartoon-Style Christmas Candles, that you can use for your christmas decorations! NEW: I have added new Variants, including A Smaller Version, and Support vor Electric Tealight Candles. Here are the Models which…
SE3D Toolhead Cover for Elegoo Centauri Carbon Before you grab this version, check out v2.0 . This is a redesigned toolhead cover for the Elegoo Centauri Carbon that improves both print quality and day-to-day usability. Key improvements:…
I modeled this vase after i did the luxury vase, because i wanted one thats easier to scale. I also made a tripleversion of this, and changed the design a tad for that. Looks also amazing printed. :) Prints best with an 0.6 or 0.8mm…
This is the third of four Cartoon-Style Christmas Candles, that you can use for your christmas decorations! I Hope you like "Grumpy, the Candle" :-) NEW: I have added new Variants, including A Smaller Version, and Support vor Electric…
This is the second of four Cartoon-Style Christmas Candles, that you can use for your christmas decorations! NEW: I have added new Variants, including A Smaller Version, and Support vor Electric Tealight Candles. Here are the Models which…
UPDATE Aug 26: Now with versions for split keyboards, putting them on stacked, like in this remix: https://www.printables.com/model/339257-skadis-pegboard-keyboard-holder - with and without hooks and different lengths. - Only in the round…
Finally, here is the fourth Cartoon-Style Christmas Candles, that you can use for your christmas decorations! Now the Set is complete :-) NEW: I have added new Variants, including A Smaller Version, and Support vor Electric Tealight…
Remix of https://www.thingiverse.com/thing:4887165 by TheBrotherBean and https://www.thingiverse.com/thing:410699 by EdisonM. Inspired by https://www.prusaprinters.org/prints/100362-fred-the-frog-but-hes-also-a-cowboy by AdamTKWallace.
All items were measured and model specifically for the Anycubic Kobra2 Max. Just Download and print no muss no fuss. Complete Cover kit premeasured. For any other printers I have included 2 files so you can make your own DIY Route…
Wanted a thicc cowboy Fred the frog but with a baseplate so I remixed it. I printed it on a Bambu Lab P1P with 0.4mm nozzle, 0.12mm layer height and auto tree supports for the hat.
Cool 3D-printable Iron Man glove and repulsor you can wear!
This is an insert / organizer for Earth, including the Kickstarter upgrades (wooden soil tokens, wooden leaves, wooden active player token, and calendar cards). It all fits in the base box, has no lid lift, supports premium sleeves on the…
At the bottom I added mounting places for M12 nuts for more secure standing. If you want the cable management ending to the left instead of the right, just mirror it in the PrusaSlicer. :-) I used supports and printed the outlines with…
If you print this for a Quest 3, please let me know in the comments how well it works. Less than 10 percent of people who download an item click the “like” button. Be the 10 percent. Click the “like” button and show your support. If you…
Everybody that can sew should be making masks now.... (written 4/4/2020) If you intend to make many masks, a rigid template for tracing and / or cutting can make things easier and faster. This pattern is for the Olson Mask that we are…
this is a airless basketball
We designed this print, to get the Apple TV mounted to the wall. Must be mounted with 3 screws. Fits the following Apple TV models Apple TV 4K (First gen) Apple TV 4K (Second gen) Apple TV HD . Does NOT fit the TV 4K third generation! For…
This is an insert / organizer for The White Castle with the Matcha expansion and all released promos as of February 2025 across the base and expansion boxes. It supports premium sleeves (Gamegenic Prime shown in the photos), vertical…
I added BMoArtists's adorable Cute Stylized Dinosaur Toy, as it has the perfect neck for added ring retention and cuteness, to my Simple Elegant Flower jewelry dish. Also added a Paul Ellis Flower model so the dinosaur didn't need…
Cut a new PTFE tube for your Kobra 2 Serie Printer with confidence. Already premeasured just insert and cut. Note: This is the correct length from factory. If after you cut PTFE tube and you insert, and it appears to long. You will need…
Chonky, cute and grumpy, what else could you expect from a perfect frog, especially from a rain frog. That's the first “complicated” model I made myself in blender and I decided to share it. MAY THE FROG BE WITH YOU
Holds: 7 (+ 4) MicroSD Cards 4 Standard SD Cards up to 9 USB-A Memory Sticks depending on size 90 degrees, angled or mixed configuration Added files for another version that also supporting USB-C this second version holds: 7 (+ 4) MicroSD…
Features 26.11.2021 updated added duct with stopper at fan hole 18.2.2021 updated the fan duct for more spacing around the nozzle. BL touch standard parts flow optimised separation of hotend and nozzle coolin I wanted to have an easy…
-Display frame (stand) for your kpop photocards. -Plain version without any text to display other cards such as Pokémon, etc. is also downloadable. -It can be printed in one piece standing up (I recommend using organic supports) or lying…
Da ich keinen Ladeständer für eine Huawei watch GT 2 gefunden habe welcher mir gefallen hat und auch ein "geschlossenes Metallarmband" unterstützt, die meisten sind für die normal enthaltenen Gummibänder und diese müssen geöffnet sein,…
Before you grab this one, check out v3.6 . v3 of the internal spool holder. For the most recent compact version with a truncated end stop, I've added 2mm of length. This will work fine for anyone with a 7.5mm spacer or larger. It will…
It's a 0.15" hole, meant for a screw bushing I also added just the rail, [so that people could add the railing to their existing dust covers. It is a 0.15" hole with a 0.25"(width)x0.1"(depth) bore head] and just the dust cover
https://www.youtube.com/watch?v=s0E5Slqdo1M https://www.youtube.com/watch?v=ZQNB9AbExpw its a meme ok
Esta peça esta no formato para Canhoto é necessário realizar o espelhamento para ser utilizado por destros. Utilizei as seguintes configurações na minha impressão: Preenchimento: 30% - Giróide Suporte: Sim (arvore) - Coloque a peça de pé…
Easy manage your cables on your printer with these simple extrusion cable clips.
I re-implemented the idea of Blue to see if I could cover more of the gap, and as I was messing around with the dimensions, I found this geometry, which fits so perfectly that it snaps into place without the need for magnets or any other…
Print instructions This model was used for foam insert to the plastic suitcase TEKNO 2011 - so it is tight fit(dimensions same as parts inside). In case of 3D printing of this please add +1mm offset entities to all lines -> in other words…
Quite sure this fits A1 and A1 mini as well. Was remodelled from a.m. stl-file on Makerworld. My prints were always a pain, no idea why, but I also liked the idea of something that comprehenses the cable completely (all around, instead…
Here's Johnny! A spooky-fun 3D model of Jack Nicholson from The Shining , capturing his iconic wild-eyed grin straight from the door scene. Designed with AI tools for fans of horror, cinema, and cult classics. Perfect for Halloween prints…
I designed this miniature crane truck in Fusion 360. It complements the miniature vehicles by agepbiz , Bryan and James Wood , all of which I also printed, but my nephew was missing a crane truck :-) WARNING: CHOKING HAZARD - Small parts.…
Motivation I have a Laser Cutter and AC Infinity 6” Inline Duct Fan requiring an adapter to reduce the 6” fan inlet to the 4” ducting from the laser. Initially, I purchased the AC Infinity Duct Adapter, 6” to 4” Ducting Reducer , but as…
Fast Bridge and Retract test part If you like it --> press like it :-) Have searched for a model with which i can fast check good settings for temperature, the fan or retract. Found a lot of Temp towers but they took nearly 3 hours for…
>Version for 1 Spool< >Version for 3 Spools< IKEA 365+ 10,6l Drybox Spoolholder for 2 Spool, with space for Silica / Desiccant and a Xiaomi Miija Bluetooth Thermometer. Update 2024-04-01 Added a splitted in 2 parts version for smaller…
Hey there, I've previously designed a similar storage for the Bambu X series https://www.printables.com/model/272099-bambu-lab-carbon-x1c-x1-p1s-p1p-with-ams-top-tool- which I use constantly and has been incredibly useful. It has been…
Never worry about your belt knobs vibrating themselves loose again. Easy Install set your belts to desired tightness. Then pop this cap over your existing one. Easy as that Printing: 20 to 25 infill / with paint on supports on on wings…
Are you an artist who struggles to draw circles between 10 and 70 mm in diameter? Well, I'm not, but you're in exactly the right place. Even if you're not an artist, this plotting compass is a very fun make. Similar designs retail for…
This is a remix and collection from different Models: https://www.thingiverse.com/thing:4701318 https://www.thingiverse.com/thing:4843569 https://www.printables.com/de/model/287780-orlog-game-case It includes all the dices, god favour…
Introduction " I will give you a name... and I shall call you Sting . " —Bilbo Baggins Forged in Gondolin for the goblin wars, this sword was used extensively in the prestigious careers of the burglar Bilbo Baggins and his nephew, Frodo…
easy-to-print and very well functioning sieve/strainer for shower/bathtub or kitchen sink. In compariason to the common ones with just holes on a flat base, this one has a much higher cross-section for the water flow and can thererfore…
+++ENGLISH BELOW+++ 3dimensionales Warnschild für die 3D Druck-Abteilung privat oder in der Firma. auch mit Single Extruder Druckbar. Für den Druck beachten: Alle Teile einzeln slicen aber in der richtigen Höhenpostion. Bei dem Düsen…
Print the parts. The handle horizontally on the print bed. Apply soft tape to the spot where the sandpaper or emery cloth will be applied (white in the picture). Cut sandpaper or linen 10 mm wide. Assemble the whole thing with M4 tread…
I've found this amazing model in https://cults3d.com/en/3d-model/home/louis-vuitton-nano-bag-for-flowers and designed by Grafit. As I've said its an amazing job. I've made some modifications to put some suculet plants on it. Ive…
Lego Back to the Future Delorean (10300) Stand This stand works better with LED kits by grabbing the outer portion of the rails. Also works well if you don't have an LED kit of course. 15 degree forward tilt, 5 degree side tilt Forward…
This is a discrete Air tag holder to make sure you know where your car is for situations including but not limited to your car getting stolen, or when you just can't remember where you parked in the Walmart Parking lot. It also serves as…
18650 Battery Clamp Mounting Holder for Pack Spot Welding. Also look at my other models and plce like them.
Simple wall mount to hang a FTX Tracer RC Car on the wall. Printed in PLA at a 0.28 layer height with 20% gyroid infill Should be compatible with the HBX 16889 RC Car as it is very similar. Potential for compatibility with other 1/16th RC…
This is a Nelson and Murdock Attorneys at Law sign that I designed and printed back in 2016 and finally got around to sharing and finishing. This is from Daredevil Season 1 on Netflix. Make sure to share your builds! Would love to see…
This is a Wall mount for the Nozzle and the Bosch Professional GBL 18V-120. The device-Mount was optimized for the blower, but shoult also work fine for other leight Bosch Pro 18V-Tools, since it's attached to the base. Screw holes are…
I recommend printing perpendicular to the printing plate, it will preserve more details and the layers are not so visible, at a low layer the time is longer, but the details are more beautiful. So far, the print with Pla Prusament silver…
Speaker Adapter for JL Audio Woofer
Lid for wheat beer glasses (German: "Weizenbier", in Bavaria also “Weißbier”). These lids fit glasses that have a thick glass rim with a diameter of 80 mm, and taper towards the opening (as on the cover picture). The hinge height can be…
This is Wilson, a sheep that was meant to be a sacrifice for a manticore but is, instead now a party member with a wizards hat. The base was from beard_second here: https://www.thingiverse.com/thing:2577122/files
SPoRK3 (also without label / clip) It's a spoon? It's a fork? In any case it's 3D printed! Due to its asymmetrical shape, it can be optimally printed lying on its side. Note: Only use food-safe plastics Clean and disinfect thoroughly…
Box set for upcycling of used Devil Design Filament Spools. It uses the existing holes in the spool. No drilling needed. V2 with 3 screws less. Fits also to Spectrum filament spool
Creality Ender 3 users please read last update below #ZKNOB This two piece part replaces and adds to the acrylic stock cover on the Creality CR-10's Z-axis lead screw; It lets you manually control the hot end up and down (when steppers…
If you use the logo, you can print the body with black and the logo with white so that it looks very similar to the original lens cap. Print all three Parts seperatly. Then glue them together in the middle. I made two lens caps for my…
This is actually a from-scratch design, but was inspired by the existing design by rrapnek. Since I have the Resistance expansion (adds the Inquisitor), my cards are around 20mm thick, so the 15mm cavity on the original design wasn't deep…
Print with TPU or some other flex/semiflex material. Go slow with logo, or preferably print the nologo -version without the nitty gritty small details. Test fit showed a good tight,but not too tight fit. edit: 9.3.2018 - added a version…
Battleship Nelson as looked like in 1936 Made in scale 1:700 for 0.4mm nozzle and layer height 0.15mm Part like main guns and second guns is mentioned as not glued and make it movable. It has tiny parts so I recommend it slow down print…
A simple snap-fit case for Adafruit's SHT41: https://www.adafruit.com/product/5776 Printed at .15mm layer height, Structural preset on my MK3.9
Have one file with the key ring and one without for anyone to remix.
Desk organizer, 7 versions. Version shown in photos has date wheel holder in back with cutouts in bottom to save a little material. One version omits cutouts and one version omits date wheel holder. Added versions to accommodate a 6x9…
Remix of MyStoopidStuff's Under Desk Slide Out Mount For A Lenovo M700 (also fits the M93p and P330) Tiny PC Really liked the design and fit but needed a rack mountable solutions, step file included incase anyone wants to make their own…
This model is one from my extensive Children's Toys Collection . This golf ball corresponds in size and design to the original golf ball. It consists of two parts that are screwed together, providing opportunities for use: As a small gift…
A Lanyard or Medal Safety Clip This will take a 1 inch or 25mm wide ribbon. Pulling on the lanyard will result in the clip pulling apart so it doesn't get stuck. Once printed test the pushing together and pulling apart of the two pieces,…
I thought a template for drawing ellipses would be an easy introduction to parametric Fusion360. I really found this challenging as Fusion on my laptop really stuggled with the combination of directly-draw ellipses using parameters. This…
The term " Sasquatch " originates from "Sasq'ets," a word in the Halq'emeylem language spoken by some Salish First Nations peoples in British Columbia, meaning "wild man" or “hairy man”. They live deep within the forests, are very tall,…
Magnetic Light Bar – Prusa Core ONE Added LEDs Simple, modular LED strip mounts designed specifically for the Prusa Core ONE chassis. These holders are sized and shaped to nest cleanly into the bent sheet metal geometry of the Core ONE,…
2020-07-09: I needed a VESA mount for my raspberry pi 4 which has this heatsink installed: https://shop.pimoroni.com/products/aluminium-heatsink-case-for-raspberry-pi-4?variant=31116595888211 However I thought it would be nice to just be…
This fits the screw pattern in the front doors of a Honda Civic DelSol. As far as I know, this same OEM part was also used by the standard Civics and some Acura and Mini Cooper models. No guarantees though! Fits 6.5" (16.5cm) speakers, I…
This is a complete set of decorative skirt inserts for a Voron Trident, based on the great work of mrhartnett and Grafton1046. The inserts have a tolerance of 0.1mm and are meant to be press fit. If a few may end up just a touch loose you…
A very modular camera arm for the Prusa mk3/s. You can mount it on the X-axis motor as a moving arm, or on the aluminum extrusion frame as a fixed arm. The fixed mount also works on any other 40x40 aluminum extrusion. It also comes in two…
Produced with the awesome support from my Patrons! Here is my take on a futuristic shipping container. It can be used to ship medical supplies to Eros, or ammunition to Armageddon. An added feature is automatic atmospheric control keeping…
Fender support part for Kukirin G2 Pro. Printed it with Bambu Lab PETG-CF. Slicer settings: 0.2mm layers; 4 perimeters; infill 40% gyroid; laying down on the broadest side; supports needed.
This model is a magnetic chalk clip designed for Triangle chalk, but any chalk of the same dimension should work (as they are all roughly the same size). There is a magnet embedded in the chalk holder and the chalk clip so that the clip…
Just buy the real thing: Bricks: https://www.greenstuffworld.com/en/acrylic-molds/3271-acrylic-molds-bricks.html Old bricks: https://www.greenstuffworld.com/en/acrylic-molds/3272-acrylic-molds-old-bricks.html Trihex paver:…
This is a stackable spring spacer for my blasters, to either adjust FPS of the blaster, or fix spring rattle! It's also compatible with some blasters by other designers. It fits pretty much any spring, such as k25, 788, Lynx/Longshot…
Model of SAOs Dark Repulsor. Prints on Prusa Mini in 2 halves. I adhered mine with glue, then painted the blade and wrapped the hilt in electrical tape for a neat look.
Print & acrylic draw.
