Counting matching models…
100mm T-Track Clamp, T-Nut Halteklammer 100mm M6 for up to 50mm Materials Flexible adjustable holder and Knob for M6 Support: yes only in the Slot Infill: 60% Gyroid Infill M6 Set Washer, Screw, Bolt…
🔒 Introducing Custom 3D Printed Inserts for the Lifepod 2.0 for the Glock 17 Gen 5 Insert by Veracon Engineering! Elevate the security and organization of your firearm storage with our custom-designed Glock 17 Gen 5 Insert for the LifePod…
This is a tool I made and used for preparing screws in Trolteks 25x600x300 ceiling plates. One side is for the corners and the other side is for measuring 300mm from the edge for the middle screw (see pictures) Category: Tools
Extended Altekruse Puzzle Set A modular set of puzzle pieces that can form various extensions of the classic Altekruse design. In each case, the goal is to assemble some number of stick-shaped pieces into an interlocking configuration…
🔒 Introducing Custom 3D Printed Lid Insert for the Lifepod 2.0 by Vaultek! Elevate the security and organization of your essential gear with our bespoke Lid Insert crafted specifically for the Lifepod 2.0. Engineered with precision and…
Ich wollte einen Lichtschlauch an der Decke befestigen und hatte keine Lust die Dinger zu kaufen. Für was hat man denn einen 3D Drucker ;) Ich arbeite gern mit Volumen-Step - Dateien beim OrcaSlicer, da diese nicht in diese…
Verwendete Nozzle N0.4 Schichthöhe 0.1mm Material PLA Infill 0% Filamentbedarf ca. 0,37 Gramm Die neuen Haltekeile klemmen genau so wie die Originalen in der Transportführung, zudem ist es möglich diese an der Unterseite mit…
Small clips that lock the LED strips in cabinets. Kleine Clips die in Schränken die LED Strips fixieren. Print Settings Printer Brand: Prusa Printer: Prusa Mk2 Rafts: No Supports: Yes Resolution: 0.4 nozzle Infill: 40% Notes: Printed in…
Update: This was my first self designed part and it is still in pretty good shape and works very well after nearly two years in service! With the red bracket broken, that holds the arm of the excavator in an upright position, fun was…
Simple design for mounting iPhone 12/13 pro with a PureGear DualTek case. Could possibly fit other models also - not tested.
Die Ersatzteile habe ich aus ASA gedruckt da es mit brüchigeren Materialien vermutlich nicht lange funktioniert.
Bookshelf for hanging on 20mm thick wood. e.g. Ikea-bed Print instructions It is recommended to use a 0,6mm nozzle to bring down the printing time to ~15,5hrs. The clips need some supporting structure and the overall used material is…
Halteklammer zum anschrauben mit Gummi und im stück druckbar ! Zugkraft bis 3 kg
Update: Die neuen Vickywoodstangen sind alle 25mm, sod ass die Klammern angepasst sind. Hallo liebe Community, bei unserem Big Villow 220 gehen öfters die Halteklammern im Eingangsbereich kaputt. Daher habe ich ein 3D Modell zum drucken…
Case for Heltek V3 Fits Heltec V3 with soldered pins ! Requires: 4x M2x10mm screws and 4x M2 brass heat-set inserts. Battery: Designed for a 21700 battery. For an 18650 battery, you must add a soft spacer (gasket). BMS Required: You must…
I designed a bracket / clip for the SwitchBot IP65 Indoor Outdoor Wireless Hygrometer Thermometer
This puzzle has several unusual features; All twelve pieces are identical. The mechanical action of the solution is quite unlike any of the other common burrs. There are three different solutions, depending on whether this action can…
Isolation cover for https://github.com/neggles/flatpack2-adapter filamet PETG, 30% infill, slicer PETG standard setting. prepare for mount with M3 inserts and M3 bolt or wood bolt 2.5x16mm
Xeltek Superpro 7500 7500N Socket Protector. I used PLA with prusa MK3S+ default settings but you can use the filament of your choice. Details On My Personal Blog https://www.stevenrhine.com/?p=131304 Facebook Xeltek User Group.…
The Vaultek Lifepod 2.0 also makes a great safe for personal items. This design has 7 spots for items and allows the optional accessory tray to sit above it.
This is a cover to protect the Hirose FX2 Connectors On the Xeltek Superpro Programmers when adapter is not in use. Print in your choice of material, I found with PLA that a .2 layer height works the best for fitment. Hope this helps…
Evolution of another project corrected for PCB size, This is an Adapter Cover for the Xeltek DX0001 Adapter. PLA / PETG 2mm Self Taping Screws with wide washer.
Adaptation for Lenovo M720 or M920 for XWYWX X2R2115 version of Realtek RTL8125b dual 2.5 RJ45
Flatpack2 protecting box for Eltek Flatpack 2HE Power Boards(PCB from eBay) -Board https://www.ebay.com/itm/196025622692
Moai Tlaltekayotl 🇫🇷 Description Ce modèle revisite la silhouette emblématique des Moai à travers une interprétation inspirée de la puissance des souverains aztèques. Avec ses proportions massives et son expression stoïque, il dégage une…
Dient als Ersatz für die linke Halteklammer der Duschkabinentür. Print instructions Druck gelingt am besten hochkant mit Stützstrukturen. Es wird noch eine Feder benötigt - eine aus einem Kugelschreiber hat wunderbar gepasst.
Trenner und Halteklammern für LOKOMA KUNSTSTOFF - EINSATZKASTEN
Cover For Single Lever 48pin Aries ZIF Socket Xeltek Beeprog Dataman and Others Due to the Various Sizes on Aries Sockets Scaling may be Needed not a lot .5% + or - I average 20 Sockets took the middle measurments and went with that.
This is Socket Cover For Xeltek Superpro 7000 Universal Programmer. Use this to protect unobtainable Oupiin 2349-100G00DP1T connectors. Print min .20 but for best results .15 due to small connector. PLA Works Well.
Da das Originalteil nicht mehr erhältlich war, habe ich es nachkonstruiert und auch ein wenig verstärkt.Die Außenmaße sind aber genau wie das Original und die Klemme passt jedenfalls bei mir 100%ig und ohne Nacharbeit. Ich habe PETG…
Similar to the Altekruse puzzle but with an extra block and 24 individual pieces which need to be printed (12 left and 12 right). Category: Puzzles
Printed in PLA, without support fits a 300x300 printbed Parts needed: dustfilter Material (I used “organza”) double sided tape or other method of adhesion magnet tape (I ripped it off the old dustfilter) since the bottom dustfilter is not…
Again part of the Altekruse family of burr puzzles, This requires 36 identical pieces to be printed. Category: Puzzles
I made these parts after the old bed slat holders became brittle and broke. They have to be nailed onto the bed frame, and the slats clip in. I have added latches to the flexible parts, helping you to pry them apart when inserting the…
Weil die originale Halteklammer vom Dr. Oetker Backblech Bake and Go gebrochen ist habe ich einen Ersatz dafür erstellt. Für optimale Stabilität gedruckt in PETG, 45° auf einer Kante stehend und 4 Wall Loops.
Ersatz für alte Kermi Heizkörper Verkleidungsklammern
Simpel, stabil, der Behälterrand ist mit selbstklebendem Fensterdichtband ca. 3mm versehen.
Cover for board from ebay , to lower the shock hazard. I'd suggest non-flammable filament like fulfilling the UL-94 V0.
------------------------------------------------Deutsch------------------------------------------------- Dient als Halteklammer für das Ersatzdruckmanometer für den Rücklauf der Hydraulik, kann auch an anderen Manometern halten. Version…
Eine Halteklammer zum aufklipsen für den Makita AkkuStabschleifer 18V , damit man die mitgeleiferten Einmaulschlüssel unterbringen kann und das suchen wegfällt.Ich habe diese Klammer aus PETG gedruckt damit es eine gewisse Federkraft hat…
Good if you travel a lot with your wifi dongle and don't want it to break. I designed it for my Realtek (clone) AC1300 (supports 2.4 and 5ghz wifi bands). Has 4 holes to allow some airflow, ensures the antennas are aligned at the same…
Cover for board from ebay , to lower the shock hazard. I'd suggest non-flammable filament like fulfilling the UL-94 V0.
Better fitting clamps for the T9 tablet from Tripltek for the motorcycle mount. The original clamps didn't include enough space for the rubber on the outside of the case. I've included a cable clamp for the usb cable. You'll need some…
Moai Tlaltekayotl 🇫🇷 Description Ce modèle revisite la silhouette emblématique des Moai à travers une interprétation inspirée de la puissance des souverains aztèques. Avec ses proportions massives et son expression stoïque, il dégage une…
Holder for these buttons specifically (19mm version) https://s.click.aliexpress.com/e/_EwNTIrI You may need to enlarge the holes a bit to make the buttons fit better. This does cover the USB port so it is more suitable for permanent setups.
Coiltek nox 10x5 coil stiffener for minelab equinox
Brauchte sie für die Inhouse Gasfaser Verkabelung. Habe sie aus PETG gedruckt. Rohr schnappt ganz gut rein. Die Muffe kann auch nachträglich über das Rohr geschnappt werden. Very satisfying!
Better fitting clamps for the T9 tablet from Tripltek for the motorcycle mount. The original clamps didn't include enough space for the rubber on the outside of the case. I've included a cable clamp for the usb cable. You'll need some…
this is a remix of https://www.thingiverse.com/thing:4879765 to allow the holder to bolt to the printer instead of clip
Both buttons are recessed by about .4 mm allowing easy press but cutting down on accidental resets.
I purchased a Qooltek LED Desk Lamp from Amazon (link below) to use for my 3D printer. The built in shield that blocks the light was not adequate and the light spilling out kept bothering my eyes. I designed this shield to be fitted onto…
Four M2x8mm screws with washers will secure the tablet to the mount.
Diese Halteklemme dient als Montagehilfe für einen Eimerbügel. Bei dieser Klemme handelt es sich um ein zwei Teiliges Modul, dass mittels eines Langloches im Unterteil einen Eimerbügel aufmimmt. Das Oberteil wird eingeklippt und sichert…
The original file from the OP works great, thanks for sharing. As I mounted the original file part, I wanted to strengthen it so it would not flex. I changed the cross section, extending an existing rib the full length of the part to…
I would recommend the use of a 0.4mm or 0.6mm nozzle and print it upright (like in the cover picture). Then there is onle the supportive structure for the hangers needed. It is quite likely that stringing occurs. weight: ~180gramm
Here's another remix of GurtKnev's tablet mount. This one is for the DJI Air 2S and the Tripletek 8" tablet. The Tripletek tablet has become quite popular and I needed a mount for my setup so I am sharing it here. Print with supports. I…
