Counting matching models…
I updated my popular 10" rack mount for Lenovo ThinkCentre Tiny. It adds up to two standard keystone jack sockets, so you can bring Ethernet/USB/HDMI (or whatever keystone you like) to the front of your rack. I made some additional…
I really liked Smelliot's version of the 10inch rack mount for Lenovo Tiny PCs, but the m900q's rubber feet are in a different position, so I remixed it and moved the feet channels to fit the m920q/m720q, and perhaps any other tiny's that…
This is a Remix of this So it now fits a 19" I needed 2 of this mount for a 19" side by side …. i have adapted the mounts from @Mauker, so you can also just print one side and use some of @Mauker Modular Rack Mount for the other side as…
It is very hard to print well because of all of the holes. It took my bambu p1s about 5 tries to get it right. It looks great and was very easy to install because of how ITG Gear designed it. I also used his front cover design and it…
Replaces the top cover of a Lenovo Mx20Q/X and provides fan opening for 120 or 140mm fans. It's not a total like for like, so you'll need to bond the front panel to the case as the supplied screw won't be enough to hold the panel on with…
Print settings: 0.2mm layer height 4+ bottom layers and 5+ top layers 6 perimeters w/ 0.6mm nozzle or 9 perimeters w/ 0.4mm nozzle 10+% infill I used PETG. PLA may work fine, but I was concerned about creep. I have also not tested the…
Fixing overheating issues when installing a GPU with a ventilation side panel on the Lenovo M910s, M920s, M720s, and M71 This project introduces a meticulously designed ventilation side panel built specifically for Lenovo M910s, M920s,…
This is a 3D model of the Thinkcentre M920. The 3D model from shuki on GrabCad https://grabcad.com/library/lenovo-2 was used as a reference and significantly modified to fit the M920 better. Fusion and STEP files included so you can…
ENG: Vertical stand for Lenovo USFF Tiny PCs. Works with M700q, M900q, M710q, M900q and presumably oder and newer variants like M720q and so on. As long as the PC is not thicker than 36mm. Made with Tinkercad. GER: Ständer für Lenovo USFF…
Print Settings 0.4mm 20% infill Support - Touching Build Plate Scale to 10% design is 10:1 to allow for detail. Can be printed with support and face down for quick/draft prints in under 1h, or with support face up for higher quality…
A new Remix of this nice mount https://www.printables.com/model/1040412-lenovo-thinkcentre-tiny-m720qm715qm920q-10-rack-mo They can now be assembled in the back too for more strength/support. The screw and hex connector's is adapted from…
Baffle for dual port 2.5GBit NIC for Lenovo M920q/M720q, in principle should work for other Lenovo-tiny series PC. Here is a link to the file created in onshape:…
This is custom, modular design that allows you to stack Lenovo M920 machines
Hi, just got some used lenovo m920q (should work for a lot of tinys with the same form factor). It has a offset ~ 32mm cause my task has pipes and metal with 30mm under the desk. So cables and connectors are not blocked. this is version…
Updated geometry to fit with a different graphics card. Inner mounting holes needed slight adjustment. I also shrinked the hole for the standoff screw just a tiny bit so you can use a heat press insert (M3). I also added a simple cover…
A new Remix of this nice mount https://www.printables.com/model/1040412-lenovo-thinkcentre-tiny-m720qm715qm920q-10-rack-mo They can now be assembled with more screws and hex nuts. + 2x keystone Print face down. Walls - 4 infill - 30 ore…
Bracket for the back plane of a M720q/M920q Lenovo ThinkCentre mini PC that has a NVIDIA T1000 graphics card fitted to it.
This is a low profile bracket/baffle for a Broadcom BCM5719-4P - 4 x 1GbE PCIe NIC (for example the BCM95719A1904G) to be used in a Lenovo ThinkCentre M920q tiny PC. Remove the card's original bracket and use a small-head screw from the…
M920q cover for a 2.5gbe A+E keyed RTL8125B adapter. Probably also fits other Lenovo ThinkCentre variants
This is a sci-fi inspired case I designed for my m920p to fit a two slut graphics card. And also a custom cooler I designed that’s integrates the 80mm Fan together with the case. there is also a bottom cover. that will introduce a little…
Description This is a 1U mount for 10" mini racks. I made it so the mini PC slides in from the front as I preferred to install the mount and then add the PC. I found this also was easier for maintenance, all I have to do is push the back…
This is a simple bracket inspired from various other to fit a dual nic card into a m920q. I printed it in PLA.
Bracket for Lenovo ThinkCentre M920Q M920 M720Q P330 Prueba de temperatura: Empieza con un valor bajo, como 220°C, y haz pruebas para encontrar el punto óptimo para tu equipo. La temperatura ideal del filamento PETG suele estar entre…
Use tin Snips to cut out the top of the lid and glue the overhang. I found a significant drop in CPU/GPU temp with the lid off vs on, having this vent should get the required result. The version you need for the Lenovo Mini is: 155x140
I wanted to install a 40mm fan on my M920q to help cool the SFP+ Mellanox card I had laying around. So I modified the ITGear Top vented case design they uploaded to Printables. V1 Is as per my photo. V2 is slight adjusted and should have…
Adjusted with PrusaSlicer, so it may not be pretty, but it just works. -You may need to hold the right side down as you screw in to prevent the print from twisting. -The right screw threads into the print. Refrain from over threading.…
I designed a air cooler for my M920p that supports a 80mm fan . it does a decent job of directing airflow through the CPU cooler. there is also a cut out in the bottom to introduce some airflow through the motherboard, because I realize…
Please note - this bracket was designed specifically for the DELL version of the Mellanox ConnectX-4 NIC. Fits perfectly in the ThinkCentre M720q/920q/x, which is a common node in many home labs.
This model was inspired by this work. Except I wanted it to use the side rails of the rackfinity system as well as have it printable on a Prusa Mini. So I designed my own version that fulfills those requirements. The back piece contains…
It's a very tight fit, and the SAS card is slightly unaligned but it fits, and it works \_(ツ)_/
After performing the https://github.com/badger707/m920q-dual-NVME mod on my M920Q, I needed a piece of plastic to retain the SSD. So I made this. Printing notes: These parts are very small, it's recommended to print both of them at the…
My friend broke his slide lock so I printed him a new one. Recommended printing laying down with 0.4 nozzle, 0.1 layer height and 100% infil
SSD bracket for Lenovo Mini-PC ThinkCentre M92p
Lenovo ThinkCentre M920q / M920x / M720q — Vented Extended Cover with 120mm Fan Drop-in replacement for the standard side cover, adding a full-length single-slot PCIe card slot (up to 175mm) and a 120mm top-mounted cooling fan. Designed…
I made this to fit a Sparkle Intel ARC A310 GPU into my Lenovo M920q, but it should fit into any Lenovo Tiny form factor PC that has a PCIe slot. You'll need some supports for the Mini DisplayPort cutouts if you don't use the included 3mf…
2.5GbE M.2 A+E Key NIC Bracket for Lenovo Tiny M720q / M920q / M920x A simple mounting bracket that lets you add a 2.5GbE network card to your Lenovo Tiny (M720q, M920q, M920x series) using the M.2 A+E key slot normally occupied by the…
The Lenovo M920s is a small form factor pc perfect for use as a home server. It is low cost and easy to find on ebay. It can handle GPUs that require 75 watts of power from the PCIE slot. The only issue with this PC is that the case is…
I didn't like the slightly unaligned baffle of darken, so i created my own. The baffle fits a SAS9207-8E HBA and 2,5gbe adapter. I cut the part above the wifiantenna hole to make a better fit. I use the antenna hole to guide the power…
Adapted bracket make the broadcom 57810 to work in a Lenovo M920q. Keep in mind that other modifications needs to be done in order to make the card to work in that tiny pc like : -Buy the appropriate pci expansion card Pcie4 expansion…
This is a remix of the “Lenovo ThinkCentre Tiny M920q 19-inch rack mount” by Mixmeister on Printables (model #1417569). The original design holds two Tiny systems side‑by‑side in 1U; this remix replaces the left slot with a front-panel…
This custom 3D-printed bracket replaces the stock 2.5" SSD tray in Lenovo ThinkCentre M920 systems. It allows mounting of an mSATA SSD via a small adapter board, creating more room inside the case—ideal when paired with a PCIe NVMe riser…
This is a blank for use with the " Lenovo Thinkcentre Tiny M720Q/M715Q/M920Q 19-inch Rack Mount" from @Mixmeister (a remix of a model from @timmi) - total credit to the creators. This is a removable blank that fits into the space where a…
Lenovo M920q 1U rack mount adapter. This is for 1/2 of a 19" rack mount 1U.
A hop-up rubber for Tokyo Marui M92. Print in TPU with brim and 0.1mm layer height. Requires some trimming after print.
This part removes any PCB flex from the standard spacer setup that comes with the M92 multi. The part was designed for M3 heat set inserts, but you could also use a longer bolt + nut.
This custom rear fan bracket replaces the PCIe blanking plate on Lenovo ThinkCentre M920/M720 systems. It mounts a 35 mm fan and a fan speed controller to direct airflow towards NVMe and SATA drives—ideal for builds using the PCIe NVMe…
There are a few brackets already out there for installed Nvidia Quadro P1000 or P620 graphics cards in the Lenovo M920q but I found them to be weak. Most of them attempted to keep the look of stamped steel and thus were too thin. They…
My original seal started leaking so I designed and printed this in TPU and so far it works!
When you have Lenovo M920z all-in-one desktops without wifi, the m.2 wifi module can be purchased, but it doesn't come with this screw-plate. This tiny plate is similar to the plate from the factory that is used to hold down the screw-end…
Main Information Connector for Makita sander and vacuum cleaner. Print Settings Connector printed in PETG, 0.4 mm nozzle, 0.2 mm layer heights, 4 wall perimetrs. Sealing ring printed in Polymaker Polyflex (also can be used TPU), 0.4 mm…
Label plate for a Lenovo Tiny m920q or m720q. SHOULD fit an m710/910 with the same front grille. Friction fit, with a 2mm standoff to allow airflow behind it Printed in ABS, but any filament should work. No supports needed
Little TPU bar to place between the monitor and the stand created by @akaderby so that it holds better in the stand and doesn't slip. Printed with 99% infill.
Case for Irem M92 Generic PCB! Requires: 7 - m3 x 5.7 threaded inserts 7 - m3 x ~40mm screws 6 - m3 x ~7mm screws (to attach split case parts) I printed at 0.2mm w/ 15% infill. See my other cases for game specific logos!
Use as the photo implies. You can use X-Y contour compensation in the slicer in case you printer produces different tolerances. Best way to install those it to put the stack modules on the side and then press them from within onto the…
ThinkCentre M920X Samsung SSD Caddy, I needed more room after adding a 2.5gig LAN to this little unit so I gutted the old Samsung SSD that was in it and that made plenty of room Heres the M2 screws I used to secure the SSD…
A lid for LA SAN MARCO SM92 Coffee Grinder. A flat version of the original lid. Print Settings: Printer Brand: Bambu Lab Printer: Bambu P1S Supports: No Infill: 20% Filament : ESUN PLA Was Used in Images Category : Kitchen & Dining
Case for Irem M92 GunforcePCB! Requires: 7 - m3 x 5.7 threaded inserts 7 - m3 x ~40mm screws 6 - m3 x ~7mm screws (to attach split case parts) I printed at 0.2mm w/ 15% infill.
Ubiquity 210W Charger + Lenovo M920 charger minirack holder. I printed it in PLA+ but ideally it should be printed in something with better temperature resistance. It holds the Ubiquity 210W Adapter and the Lenovo Thinkcenter M920 power…
Basic simple no support required plate for fastening a 2.5g dual RTL8125B network card into a Lenovo M920Q machine. Is also compatible with M720 machines. Uses all stock screws and is best produced using PETG filament. Please like and…
No supports needed I based my design on the m920t, but I suspect that this will work with the m920t, m910t, and m910s. Let me know in the comments if it works on another system.
10GTek X520-DA1 bracket for Lenovo M720Q / M920Q (pcie riser needed), 3,5mm notch added for usb cable of 4010 blower fan if needed.
Case for Irem M92 Gunforce PCB! Requires: 7 - m3 x 5.7 threaded inserts 7 - m3 x ~40mm screws 6 - m3 x ~7mm screws (to attach split case parts) I printed at 0.2mm w/ 15% infill.
Case for Irem M92 R-Type Leo PCB! Requires: 7 - m3 x 5.7 threaded inserts 7 - m3 x ~40mm screws 6 - m3 x ~7mm screws (to attach split case parts) I printed at 0.2mm w/ 15% infill.
I made this to fit a Sparkle Intel ARC A310 GPU into my Lenovo M920q, but it should fit into any Lenovo Tiny form factor PC that has a PCIe slot. This is the second version of the mount with better airflow and no supports needed. I've…
Makita M9204 125mm 5" 240v Electric Random Orbital Sander adapter to go to a C35 Bosch female adapter. I recommend using my remix of this adapter as i have resized using an actual Bosch tool.
The card edge chassis baffle that came with this network card did not fit the m920 chassis. I thought it would look nice to follow the square hole motif the chassis had going.
Rear panel adapter to fit 2.5G + 4x sata card in M920q Fits M3x5.7 heat inserts from CNC Kitchen in holes. 2.5G + 4 sata can be found here…
Rear plate adapter for Startech PEX10GSFP for fitting in M920q. M3x5.7mm heat inserts from CNC Kitchen fit in holes. https://www.startech.com/en-us/networking-io/pex10gsfp
It is very hard to print well because of all of the holes. It took my bambu p1s about 5 tries to get it right. It looks great and was very easy to install because of how ITG Gear designed it. I also used his front cover design and it…
This is custom, modular design that allows you to stack Lenovo M920 machines
This 3D model file offers a customized top cover and front bezel designed specifically for the Lenovo M920q to accommodate the MSI RTX 3050 LP 6G graphics card. The top cover has been extended by 10mm to ensure a perfect fit for the GPU,…
There are a few brackets already out there for installed Nvidia Quadro P1000 or P620 graphics cards in the Lenovo M920q but I found them to be weak. Most of them attempted to keep the look of stamped steel and thus were too thin. They…
