Counting matching models…
This is a pistol-style RC transmitter based on Arduino . It was created as a simple and budget-friendly alternative to commercial transmitters. It covers the basics and works well for controlling cars, boats, or other models where you…
Battery covers are one of the easiest things to lose, and no one wants to order a new one and wait a couple of days to receive it. Now you can replace your backplate in under 30 minutes! Print Settings: Resolution: .15mm Supports: Yes…
See https://www.playingwithfusion.com/ for more information, or see assembly instructions on Instructables here .
Here's my version of the Voyager mobile emitter. It uses 6x2mm magnets. The circuit board uses color swapping to get the green and gold colors. I used Prusaslicer's Arachne perimeter generator setting at .15mm layer height to get the…
Check out my Amazon Page to see what kind of gear I use to make these models! The Mobile Emitter from Star Trek: Voyager! This model is hollow and made in two pieces, so you can use a small piece of circuit board to finish off the prop.…
Props show the emitter head and middle part, Discovery_Phaser_Mods_-_4_emitter_4, rotates. Did a quick part sketch using Prusa Slicer cylinders. This is why you have to open the 3mf file so the negative volumes will create the holes in…
This is the iconic beam emitter structure from the first level you set foot on the holy ring. The geometry was extracted from the game and heavily modified to be 3d printable. There are a few built in supports that are designed for a 0.2…
A custom emitter for you Savi's Workshop lightsaber. Category: Props
Remix of the transmitter box from Shaladdin's awesome Wireless powered BentoBox (remixed from thrutheframe's BentoBox Air Purifier for X1C). My version of the X1 Carbon (received April '23) has an extended edge which prevents installation…
Update: Version 3 uploaded. For user request I have added 2 more screws at the arms to base connection, and enforced a little bit the arms. Setting the nuts in the slot for the lower screw will need patient.:) I have not printed this…
A custom emitter for you Savi's Workshop lightsaber. Category: Props
I created a Gamepad RC Controller. The entire build is made of PLA. It is powered by single Li-ion 18650 battery. There are just three types of screws holding it together, which simplifies assembly and maintenance. This controller is not…
Introducing the q-tip stick end for an FPV transmitter. The hole is self threading on an M3 bolt. I can create other sizes if anyone asks. I liked this particular stick end since I'm a bit of a hybrid user. Notes: Don't over tighten, it…
Made a case for my ESP8285 ESP-01M IR Infrared Transmitter Module that I use as remote for my TV with Home Assistant I used ESPHome remote transmitter https://esphome.io/components/remote_transmitter.html with the IR remote codes from…
Housing for an FPV camera incl. transmitter and battery. If you don't have a drone handy, the unit is straightforward to get a camera image from the air. The duration of use can be longer with an e-sailplane model than with a drone. So…
Rack(s) for holding the Xvive U4 In Ear System Transmitters (with cable routing channels for all models). I used some scotch tape to keep the cables in their channels, then mounted with command strips. I’ve included ready to go STL’s for…
For some insane reason, I decided to dive into the world of DIY drones by building my own transmitter and some would say the results were catastrophic. In the end, I learned a lot in the process and did successfully build a drone…
RC car transmitter wall mount (holder) for mounting via screw or sticky tape RC transmitter to the wall for storage. This is sized for all rc car transmitters, it may fit other transmitters, but not guaranteed. I made another model, for…
I wanted to reduce the flow that my cheap 8way emitters were putting out. I bought a cheap 50pack knock off version of rain bird emitters (example in pictures). I have too many in the garden now though and can't get enough pressure so I…
This transmitter tray is designed specifically for the Radiomaster TX16S with a folding handle. All parts were printed in PETG for outdoor use: Satin sheet and Kores application 0.4mm nozzle 240C nozzle temp 90C bed temp 15% infill…
Here's my version of the holo emitter worn by Elnor and Raffi in Picard seasons 2 and 3. While it is hard to get a clear look at the prop--and there are no reference photos online--I did my best to get it looking close. I had no idea what…
Transmitter Tray FLYSKY i6 or TURNIGY i6 by GeorgeXib on Thingiverse: https://www.thingiverse.com/thing:2655235
Just a wall hanger to keep things organized. Print in PLA without supports.
The DoorHan Transmitter 2 Pro key fob I use for my garage door has buttons that are easy to press by mistake, as they have low resistance and are in line with the top surface. I designed snap-on cover to hide the buttons a bit, so they…
Arduino NRF24L01-Based 10-Channel RC Transmitter – 3D Printed Case 🔧 Project Overview: A custom 10-channel RC transmitter designed using the Arduino Nano and nRF24L01 wireless module. It includes support for dual joysticks,…
As I rewatched a Voyager episode yesterday, I realized the type II phasers were equipped with some blue prism tape on the underside of the prefire chamber. As that is quite hard to get, I decided to reproduce this little feature as a 3D…
Mount to attach DJI Mic receiver and transmitter to a Canon EOS R. Instead of using my big Videomic Pro+. This way, you can also use the DJI Mic while using a gimbal (in my case a Zhiyun Weebill Lab). V2 has a slightly smaller hotshoe…
Update 05.01.2024 I have uploaded the Fusion 360 file including the original hilt and custom emitter and pommel. I wanted a more “classic” emitter for the lightsaber and was inspired by a few images I found online. I plan to use the prop…
None of the models I found had screen accurate circuitry modeled in. They either used a paper print out or a cut up piece of actual circuit board. The included PIC is for reference painting. I also made some minor size modifications based…
***CLICK HERE TO GO TO THE UPDATED VERSION OF MY KANAN JARRUS SABER: https://www.printables.com/model/691865-kanan-jarrus-lightsaber-v2 This is my take on Kanan Jarrus’ lightsaber. There are plenty of them out there... but they all are…
printed in PLA, probably could be printed in TPU as well. Try printing without support.
TQI Transmitter wall mount (holder) for mounting via screw or sticky tape RC transmitter to the wall for storage. This is sized for Traxxas TQI transmitter, it may fit other transmitters, but not guaranteed. I made another model, for…
I designed some fancy switch sleeves for my Taranis QX7. I suspect that they'll fit the X9D and most other radios. Must be printed in a flexible filament. Inspired by these silicone doo-dads: Slicone Transmitter Anti-slipping Stick Switch…
Wall mount for Spektrum SLT2 RC car transmitters, that come with lots of Arrma RC cars, e.g. Gorgon, Granite Mega, Fury, Vorteks, Grom series, ... Might also work with similar transmitters from other brands, but not tested. For mounting…
This holder will let you place once for all the transmitter under your desk. It have not being designed to be removal. It's ugly but work's well. You can place it with 3M tape under a glass table or any desk. The battery tray is still…
Wall mount for quadcopters/drones. Suitable for most 3"-5" frames and even a transmitter. The transmitter one is slightly narrower for a Taranis but would probably fit most models. OpenSCAD files included so you can modify it to suit your…
Combined 2 emitter models into one. Emitter is by timmy_3d and emitter tip is by UnimatrixRed. I added UnimatrixRed's emitter tip to timmy_3d's emitter and splitted it into parts for easier printing. You need also to print new neck remix…
My daughter (8) has quite small hands for her rc car transmitter (spektrum dx3). This makes it really hard for her to reach reverse by just stretching her finger as there is such a large gap in the trigger. This buffer removes the space…
Case for KY-008 Laser transmitter and reciever
Halterung für Teradek Blot 6 an Blackmagic URSA mini 4.6k Kamera Mounting bracket for Teradek Bolt 6 on Blackmagic URSA Mini 4.6K camera
This is a battery extension box for the RadioLink RC8X RC transmitter. This extension allows you to use more widely available rechargeable batteries, like the 2 cell battery packs that use the 18650 cell type batteries. Those battery…
I teach a summer Star Wars class that culminates in every student building their own lightsaber. I didn't want every student making the same exact lightsaber, so I started deriving the original 3d models into mix-and-match alternatives,…
Yet another grippy… but this one's kinda nice. ;) I printed with Siraya Blu on a Sonic Mini 4k printer, using Siraya recommended settings (4.5sec exposure, etc). The holes for standard brass threaded inserts are exact size. Inserts press…
Simple protective cover for the HSE2-868-BS Hörmann hand-held transmitter. In my case, the holder for the lower part broke off. This keeps it in place. The cover also protects against fall damage, as this is how I damaged the lower part.…
Work-In-Progress: 23.05.17 add dx5e mount file My mini transmitter 162x130x40 mm. on AR Uni board ( https://www.rcgroups.com/forums/showthread.php?2570260-ARUni-AR-Universal-board ) I use frsky XJT transmitter & DX5e DSMX module. For…
The magnet of the charing port is too weak. The mic mini transmitter can be knock off even using the original charging cable. so I have to make a case to keep them together while charing. There is a window o the left side so you can see…
howtomechatronic diy rc transmitter box based on : https://howtomechatronics.com/projects/diy-arduino-rc-transmitter/
I really dislike the foam feel of RC car radios. I decided to design a replacement for the SLT3 used with my Arrma Typhon 3S. This part will fit any SLT3 transmitter, which comes on most all of Arrma's 3S line (Typhon, Granite, Senton,…
Have you ever mowed over the pop-up cap of your yard drainage pipe? TWICE!? Me too!! Replacements go for $12 apiece online but you can print a replacement cap at draft settings for around $1 worth of PETG. Does not include the surrounding…
This is a printed alternative to the item available at: https://shop.jetiusa.com/Jeti-Transmitter-Holder-DS-12-p/mar-hds12.htm I decided that the price of the original solution was too high, so I decided to design my own solution. For…
you need to connect with glue or tape
This is a little case I put together to give my iPod Classic 5th generation (iPod 5g/iPod video) a backpack to hold a 1Mii bluetooth transmitter/receiver, instead of just letting it dangle around and potentially get damaged or damage the…
Reproduce of original cheap mini sprinkler “shrubbler” 360° mini sprinkler. Printed in PETG 0.2mm.
Replacement battery cover for DumboRC DDF-350 Transmitter.
Here's my version of the Doctor's mobile emitter from the distant future setting of Starfleet Academy. Uses 6x2mm magnets. Use color swapping for the board. Hard to tell what colors it is, but it looks like green and gold with a red…
This is FMS R3A Transmitter holder for IKEA Skadis pegboard. This transmitter (controller) comes with FMS FCX24 cars, I had it with Chevrolet K5. This item is inspired by IKEA SKADIS Collection by CSD Salzburg, it uses the same hook…
it's deigned so that the top comes off like it does in the show it's split into pieces that make it easier to either print in different colors or paint
Can be used for an RFLink setup for example with an Arduino Mega (with micro USB or USB-C connector), a 433 MHz superheterodyne transmitter, and a receiver with copper antennas. The case is a somewhat loose friction fit, to make it easy…
Added a 120mm stand area for the transmitter of my RC Truggy.
SCX24 Transmitter wheel thumb extender. For single-handed transmitter use. This lets you have a free hand while driving, so you can film with your phone, eat a tasty sandwich, or do anything else your other hand needs to be doing.…
This is a little tool used to get the nuts of transmitter switches. This specific one was made for the taller tapered nuts found on the FlySky i6 transmitters. Print Settings Printer Brand: Prusa Printer: Prusa Mk2 Rafts: No Supports: No…
This is an updated version of the Emitter from this amazing Lightsaber project: https://www.printables.com/model/542429-lightsaber-rp2040 The Emitter was not screwing in completely with the Blade Holder placed inside. I have shortened the…
This is a remix of emcee1111's transmitter box to support this USB-C based charging coil: https://www.amazon.com/dp/B09FLCMGV9 . The original charging coil listed for the Wireless Bento Box doesn't appear to work well with 24v fans. Based…
I made Stick End for M3 screw with M3 nut DIN 985. Enjoy it.
This is a slight remix I did in order to fit a Qi USB-C Transmitter. Here is the Amazon link to the transmitter I used: https://www.amazon.com/gp/product/B0BRMMYZR2/ref=ppx_yo_dt_b_asin_title_o02_s00?ie=UTF8&psc=1 Note: I had to make some…
So recently I was gifted a mini fog machine. It works great and I figured why not ingrate it into my dungeon tiles. I saw nothing previous looked to exist, so I booted up Fusion 360 and made these. By making just the emitter portion, you…
V5 of the Gimbal Guard is the one you should be printing, I've uploaded the other versions to show the iterative process I went through. V1 worked, but was terrible to remove, and was mainly to confirm my measurements. V2 was nice to…
Line 6 G30 Transmitter Pouch
I wanted to fly these cool UMX planes and micro helicopters with my Jeti DS Transmitter. So I built a box to fit the Organge Module from HK (OrangeRX DSMX/DSM2/Devo 2.4Ghz Switchable Transmitter Module V2.0 JR/Turnigy/Taranis/Walkera…
Needed more terrain for Five Parsecs, so I made this simple tower design that prints without the need for supports. Is it a transmitter? A solar panel? Up to you! Bishop is not included. He is just there for scale. :) If you haven't heard…
This is roughly designed after a Hammarlund style vintage form, with some changes. I designed it to accept a common octal plug in tube base: https://www.tubesandmore.com/products/plug-8-pin-octal-tube-base-black-plastic OD is 1.625",…
Wall mount for Spektrum SLT3 RC car transmitters, that come with lots of Arrma RC cars, e.g. Senton, Granite 223s, Kraton, Typhoon, Big Rock, Mojave, ... Will also work with Spektrum DX3 Smart transmitter, since it's the same shell as the…
These sticks are primarily designed for the graupner MZ12 RC transmitter, although it might work with any transmitter using an M3 nut design. I printed these without a brim, but it might be a good idea to use one if you have some adhesion…
Just some gimbal stick extenders for RC Transmitters that take m3 screws/threading. STL uses a m3*10 screw with 2 m3 nuts (see images). I used cheap superglue to put the two pieces together and they have yet to come apart. Only tested on…
This is a tray console for Spektrum RC Transmitter DX6, DX7, DX8. Transmitter gets fully fixed and can't fall out. The transmitter console can be placed either flat or upright without the transmitter touching the ground. Parts 1 & 2 are…
Simple mount to reuse your existing adapters for antennas in standard d-type mounting situations, e.g when mounting two transmitters with LD Systems U500 RK 2 or similar. The opening has some room and due to the plastic the adapter might…
This is a mounted holder for the SHURE AD1 BODY PACK Transmitter. At the station I work at the mic cords would get damaged from being wrapped around the transmitter. So I designed this mount to let the body pack sit in and allow the mic…
Printing instructions: 0.16 mm 15% infill Printer must be able to handle 0.2 mm clearances (most modern printers can, I used the Bambu Lab A1) ASSEMBLY INSTRUCTIONS (IMPORTANT) The Top Dome file has a slight indent with the “The Finals”…
Jeti TX Lite Modulgehäuse für TU2 Sendemodul Das Modulgehäuse ist passend für das Jeti TU2 Sendemodul. Damit lässt sich das TU2 Modul an Fernsteuerungen wie TBS Tango2, Taranis-X-Lite und voraussichtlich Radiomaster Zorro betreiben. Das…
About: My friend is in a German punk band and asked me to help find a solution to keeping his wireless transmitter on his bass guitar strap. This is the first version I came up with. Will also upload version two on my profile which…
The tubes need sanding down and a lubricant to fit but the emitter is fine
Redesign of the handle from Flysky FS-i6 RC transmitter for use on FS-TM10 RC transmitter. The handle can also be used for TX FS-i6 or Turnigy. This model was used as a source: https://www.thingiverse.com/thing:2254514
This is a remix form another model. Here I only uploaded the moditications done. You should go to the original part and take the misssing files. Based on this design ( https://www.thingiverse.com/thing:1607446 ) I made a new top part to…
Split Bobbin For Large Area Coils Ever need a coil for remote power transmission over a short distance. You can buy these online to light LEDs randomly arranged inside the coil and not too far away. This is useful to brighten up your Lego…
This wall mount should hold just about any transmitter pack for lavalier style microphones (including head mounted microphone). If you use a head mount style microphone (as in picture), there is a notch at the back of the mount, to hang…
Replacement cap stem for pop-up drainage emitter commonly used in landscaping applications. Apparently these get damaged pretty easily with lawn equipment. This part can be printed w/out supports. I printed using generic (anycubic) PETG,…
Dva identické stožáry vedle sebe na společném podstavci s nápisem „LIBLICE B“.Byly odstřeleny dne 15.10.2026
I wanted more room on my desktop so i made this holder to mount it under the table. Space to use all the ports
Sigma Speed Transmitter Sensor
You probably want to add supports under the small part that sticks out 90 degrees on the clip.
Description The top and bottom parts are mostly accurate copies of the original guard. The stands, however, were redesigned slightly to be more robust and durable. If you've also damaged your emitter shield, feel free to use or modify…
The Pop Up Drainage Emitter in my yard was missing parts....naturally.....reverse engineered it and DFM'd the geometry. During the design phase I took the opportunity to get creative with the attachment. Both pieces are printed…
@Shaladdin_631765 's amazing https://www.printables.com/model/441292-wireless-powered-bambu-lab-bento-box-v1-v2-for-x1c wireless remix of @thrutheframe…
Transmitter box for 20w charger find in europe ecommerce based on new x1c design
For Arduino Laser and LDR Data Transmission. It been used 0.8mm Fishing Line Clear Nylon. look at last images Print Settings Material: PLA Rafts: No Supports: No Nozzle: 0.4 Resolution: 0.08 because of fine Thread
This is a single model, print 2 of them. Slides over each end of the Transmitter, small cutouts to go around the feet, and thick enough so the feet are flush with the bottom side for flat mounting. The front or back has a small lip to…
Inspired by console gaming controllers, this knob is more comfortable while retaining grippyness.
✨ Welcome to the iNap Malinka main page! ✨ iNap Malinka was mostly made as a decent Raspberry Pi based NRF24L01 transmitter. But as it turns out you can play some games on it as well! It's a small DIY handheld that runs RetroPie so any…
this is a miniature case for a DigiStump Attiny85 and a common 433mhz transmitter. both wired together it make for a Micro FoxHunting Transmitter on UHF/70cm band! you only need a USB power bank to plug this in and you are ready to go.…
