P
PrintablesConcreteHead
Roger Moore James Bond 007
A Zbrush sculpt of Roger Moore. Scale it to your needs and use the organic support option (Prusa Slicer)
- Downloads
- 1,101
- Likes
- 73
- Rating
- 5
Search results: moor
Counting matching models…
P
PrintablesTomson Design
6.5 Creedmoor ammo box
I got a request for 6,5 Creedmoor ammo box. The spacing is 20pcs/75,24x12,60mm between the insert top and bottom. Plz read the dimensions before printing. I made a little headroom but let me know if you have another 6.5 creedmoor that…
- Downloads
- 792
- Likes
- 89
- Rating
- 5
P
Printablesplaid_brad
6.5 Creedmoor, 25 Creedmoor, 6 Creedmoor, 22 Creedmoor - Ammo Case Insert - Apache 1800 - v2
If you like my models and feel inclined, I could always use more filament for test prints. https://ko-fi.com/plaid_brad These are inserts (and corresponding lid badges) to build a 100 round weatherproof ammo case out of Harbor Freight's…
- Downloads
- 757
- Likes
- 78
- Rating
- 5
P
Printablesis-serp
6.5 Creedmoor
The 6.5mm Creedmoor is a centerfire rifle cartridge developed for Creedmoor Sports and introduced by Hornady in 2007. It was designed specifically for long-range target shooting. The cartridge is a modification of the 6.5 Carcano and the…
- Downloads
- 562
- Likes
- 24
- Rating
- 5
P
PrintablesKen226
6.5 Creedmoor Reloading Tray
Works with PLA or ABS. Use supports at your own discretion. I printed several of these with no supports whatsoever. Redesigned using metric measurements as most 3d print software is metric. Category: 3D Printing
- Downloads
- 488
- Likes
- 62
- Rating
- 5
P
PrintablesPeter Farell
Moorish mandala
Moorish Mandala Easy Print. Print instructions Category: Decor
- Downloads
- 483
- Likes
- 43
- Rating
- 5
P
PrintablesTomson Design
6.5 Creedmoor SAKO ammo box 50pcs
I got a request for 6,5 Creedmoor 20pcs ammo box. So i made a 50pcs version as well for you who wanted a box for more ammo. The spacing is 50pcs/75,51x12,60mm between the insert top and bottom. Plz read the dimensions before printing. I…
- Downloads
- 474
- Likes
- 41
- Rating
- 5
P
PrintablesTomson Design
6.5 Creedmoor Ruger ammo box 50pcs
I got a request for 6,5 Creedmoor 20pcs ammo box. So i made a 50pcs version as well for you who wanted a box for more ammo. The spacing is 50pcs/75,51x12,60mm between the insert top and bottom. Plz read the dimensions before printing. I…
- Downloads
- 394
- Likes
- 37
- Rating
- 0
P
Printablesspearmountain
6.5mm Creedmoor replica and snap cap
6.5mm Creedmoor, also known as 6.5 CM, 6.5 CRDMR, or 6.5 Creed, is a centerfire rifle cartridge designed in the United States of America by Hornady in 2007. Print this for props, display, education, training, just because it's cool, or…
- Downloads
- 390
- Likes
- 53
- Rating
- 5
P
PrintablesKen226
6.5 Creedmoor Reloading Tray
As long as your printer is capable of 1" bridging, you should be able to print this without supports.
- Downloads
- 380
- Likes
- 48
- Rating
- 5
P
PrintablesThejiral
Moored sailing ship: Catan (high resolution MMU) cosmetic add-on
---------------------------------------------------------------------------------------------------------------- Update V2 The initial model included overlapping volumes which did slice correctly in an older Prusaslicer version but not in…
- Downloads
- 325
- Likes
- 57
- Rating
- 5
P
Printablesfirstgizmo
Cargo Mooring Hook System 1/10 scale
This fastener is intended to be used with packing ribbon for presents. You can use the fabric type ribbon or the fully plastic one. Even though it is really tiny, it still works like the real deal! The MooringPoints are to be used with…
- Downloads
- 309
- Likes
- 109
- Rating
- 5
P
PrintablesPeter Farell
Moorish Shield
Moorish Shield. just say yes to vertex groups.
- Downloads
- 290
- Likes
- 43
- Rating
- 0
P
PrintablesMrTrick
Mooring Hook - Rope Over Tree Branch Tool
"How can I get this rope up there ??" You don't need this tool... until you do! Simple to print, and should fit on any broom handle or extendable pole with a tapered end. You can optionally add screws to prevent it falling off the end.…
- Downloads
- 282
- Likes
- 71
- Rating
- 5
P
Printablesbrass_ring
6.5 Creedmoor Stacking Loading Block
6.5 Creedmoor stacking loading block with a clearance of 20mm for powder funnel. This is a work in progress, so check for updates before printing. Category: Tool Holders & Boxes
- Downloads
- 217
- Likes
- 19
- Rating
- 0
P
PrintablesPlaceholder
Warcraft Rumble - Jaine Proudmoore
Warcraft Rumble - Jaine Proudmoore, provided by Blizzard https://warcraftrumble.blizzard.com/en-gb/collection
- Downloads
- 206
- Likes
- 20
- Rating
- 4
P
PrintablesRBurling99
Ammo Box - 6.5 Grendel / 6.5 Creedmoor - 100 Round
I could only find 50 round ammo boxes available for 6.5 Grendel and wanted to keep them in batches of 100 for reloading and sorting purposes. I designed the model with a minimalist approach, so the 2 pieces print and snap together…no need…
- Downloads
- 204
- Likes
- 23
- Rating
- 4
P
PrintablesPDXPrintandDesign
308/6.5 Creedmoor Reloading Tray 100ct
100ct Reloading tray for 6.5 Creedmoor or 308.
- Downloads
- 204
- Likes
- 21
- Rating
- 0
P
PrintablesGBMaryland
6mm Creedmoor Cartridge Insert for Milwaukee Packout (48-22-8435)
6mm Creedmoor Cartridge Insert for Milwaukee Packout ( 48-22-8435 ) This is a 2 part 6mm Creedmoor Cartridge Insert for Milwaukee Packout ( 48-22-8435 ) case. Typically, when participating in a Precision Rifle Match (PRS) or attending a…
- Downloads
- 187
- Likes
- 38
- Rating
- 5
P
PrintablesChewieChris
Tikka T3x Single Feeder – Short Action (.308 / 6.5 Creedmoor)
This single feeder is designed for Tikka T3x rifles and replaces the standard magazine to allow convenient single-round loading directly into the action. It is ideal for shooters who prefer or require single-shot operation, such as during…
- Downloads
- 178
- Likes
- 12
- Rating
- 3
P
Printables3Dprinterpuglia
TESTE DI MORO , MOOR'S HEADS
TESTE DI MORO 👑 Teste di Moro Siciliane Ciao Maker! Condivido con voi le mie riproduzioni delle iconiche Teste di Moro in ceramica di Caltagirone, un must dell'artigianato siciliano! Un progetto fantastico per la vostra stampante 3D! 🏺 La…
- Downloads
- 177
- Likes
- 7
- Rating
- 0
P
PrintablesTomson Design
6.5 Creedmoor Ruger ammo box
I got a request for 6,5 Creedmoor ammo box. The spacing is 20pcs/75,24x12,60mm between the insert top and bottom. Plz read the dimensions before printing. I made a little headroom but let me know if you have another 6.5 creedmoor that…
- Downloads
- 160
- Likes
- 22
- Rating
- 5
P
PrintablesEOLO
BICHERO AUTOMÁTICO HOOK MOORING
BICHERO AUTOMÁTICO HOOK MOORING Print Settings Rafts: No Supports: No Resolution: 0,28 Infill: 60-70 % MÍNIMO Filament: SMART MATERIALS PETG - (O ASA) CUALQUIERA Notes: PEGAR LA PINZA DENTRO DEL MANGO Y LUEGO PEGAR EL TAPÓN. HACER 2…
- Downloads
- 157
- Likes
- 16
- Rating
- 0
P
PrintablesTomson Design
6.5 Creedmoor SAKO ammo box
I got a request for 6,5 Creedmoor ammo box. The spacing is 20pcs/75,24x12,60mm between the insert top and bottom. Plz read the dimensions before printing. I made a little headroom but let me know if you have another 6.5 creedmoor that…
- Downloads
- 155
- Likes
- 20
- Rating
- 0
P
PrintablesRuebarb
6.5 Creedmoor Powder Funnel
6.5 Creedmoor Powder Funnel, largest opening possible, no spilled kernals 0.4 nozzle 0.1 layer 20% Infill 3 perimeters top, bottom, side No brim if quality PETG, brim for PLA Print Settings Supports: No Resolution: 0.1 **Infill:** 20%…
- Downloads
- 152
- Likes
- 10
- Rating
- 5
P
PrintablesAksup
Chamber clear flag 6.5Creedmoor
Chamber clear flag 6.5Creedmoor
- Downloads
- 144
- Likes
- 12
- Rating
- 4
P
PrintablesPeter Farell
Moorish Moon
Moorish Moon Decoration. Flat Back. Print instructions Category: Decor
- Downloads
- 138
- Likes
- 30
- Rating
- 0
P
PrintablesC&G Creations
6.5mm Creedmoor Reloading Tray 50 ct.
A remix of @ken226 's reloading trays. I added numbers and letters for ease in load development.
- Downloads
- 136
- Likes
- 14
- Rating
- 0
P
PrintablesKoosh
6.5 Creedmoor round saddle (M-lock)
This is a bullet saddle for a 6.5 Creedmoor rifle and it holds 6 rounds. Could make is as long or short if need be. (Find 3MF attached)
- Downloads
- 129
- Likes
- 23
- Rating
- 0
P
PrintablesPetar Đajip
AMMO CADDY - 6,5 creedmoor
The Ammo Caddy for 25 rounds of 6,5 creedmoor is a convenient and reliable accessory for storing and easily using your ammunition. This holder is designed with the needs of shooters, hunters, and sports shooters in mind, who want their…
- Downloads
- 124
- Likes
- 15
- Rating
- 0
P
PrintablesTomson Design
6.5 Creedmoor Mossberg ammo box 50pcs
I got a request for 6,5 Creedmoor 20pcs ammo box. So i made a 50pcs version as well for you who wanted a box for more ammo. The spacing is 50pcs/75,51x12,60mm between the insert top and bottom. Plz read the dimensions before printing. I…
- Downloads
- 124
- Likes
- 13
- Rating
- 0
P
PrintablesC&G Creations
6.5 mm Creedmoor Load Development V2
I needed a taller set than the previous, to allow for the longer ballistic tips. These are approximately ¾" taller.
- Downloads
- 121
- Likes
- 16
- Rating
- 0
P
PrintablesOzamo
Moorhuhn pen holder
Models are presented for single-color and multi-color printing (I don’t have a printer that supports multi-color printing, so I checked it through Bambu Studio). I painted my color model, which is in the photo. Height 120mm. 3D PRINTING…
- Downloads
- 111
- Likes
- 16
- Rating
- 0
P
PrintablesChannabasanna S
Lord Shiva moorthi (Shivalinga)
The model is created using the Onshape tool. This is a symbolic representation of Lord Shiva called as Shiva Linga. Once printed. Make sure you glue both the parts and that will bring the print to realistic idol
- Downloads
- 110
- Likes
- 6
- Rating
- 0
P
PrintablesGleep
Forestshuffle / Mischwald DARTMOOR incl Exmoor insert. Also suitable for SMOKY MOUNTAINS.
Insert for Forestshuffle / Mischwald DARTMOOR or SMOKY MOUNTAINS Enough space for sleeved cards. Separate slots for forest cards, winter cards, caves, scoring sheet, clearing and optional: pencil. Enough space to also accommodate Exmoor…
- Downloads
- 108
- Likes
- 4
- Rating
- 5
P
PrintablesAbrahamsson Anders
65Creedmoor ammo box
The lid needs support in the center during printing.
- Downloads
- 101
- Likes
- 4
- Rating
- 0
P
PrintablesChainmail Weaves
Moorish Rose weave Parametric Chainmail
This also includes a Smaller 3-rose test print. Included the blend file and a couple of photos on how to go about changing the sheet size and exporting it in blender
- Downloads
- 99
- Likes
- 25
- Rating
- 0
P
Printablesbrass_ring
6.5 Creedmoor Vase Mode Stacking Loading Block
6.5 Creedmoor Vase Mode stacking loading block with a clearance of 20mm for powder funnel. This is a work in progress, so check for updates before printing. Print Settings Rafts: Doesn't Matter Supports: No Resolution: .2 Notes: Print in…
- Downloads
- 92
- Likes
- 10
- Rating
- 0
P
PrintablesChainmail Weaves
Moorish Rose Pendant
A moorish rose pendant, I thought the pattern looked very pretty and deserved to be a standalone pendant as others have made from real chainmail in the past. :) Hope you all enjoy! , Also use organic supports for the large outer ring
- Downloads
- 92
- Likes
- 35
- Rating
- 0
P
PrintablesPeter Farell
Moorish mandala
Moorish Mandala Easy Print. Category: Decor
- Downloads
- 91
- Likes
- 15
- Rating
- 0
P
PrintablesPeter Farell
Moorish Office Supply Holder
Moorish office supply holder. Designed with depth maps generated by stable diffusion.
- Downloads
- 83
- Likes
- 19
- Rating
- 0
P
PrintablesHijinx
Bauker / Hawksmoor grass trimmer Makita conversion
This is a non-destructive conversion of a Bauker/Hawksmoor grass trimmer/strimmer to use Makita LXT batteries. This tool is an absolute bargin for £24 as a bare tool (no batter/charger) from Toolstation in the UK:…
- Downloads
- 82
- Likes
- 5
- Rating
- 0
P
PrintablesTomson Design
6.5 Creedmoor Remington ammo box
I got a request for 6,5 Creedmoor ammo box. The spacing is 20pcs/75,24x12,60mm between the insert top and bottom. Plz read the dimensions before printing. I made a little headroom but let me know if you have another 6.5 creedmoor that…
- Downloads
- 78
- Likes
- 12
- Rating
- 0
P
PrintablesTex
6.5 Creedmoor - SAAMI Spec
6.5 Creedmoor - SAAMI Spec 2.825 OAL CBTO: 2.08
- Downloads
- 74
- Likes
- 7
- Rating
- 0
P
PrintablesC&G Creations
6.5mm Creedmoor Load Development Cases 5 to 50 ct.
I needed some cases for load development of my 6.5 Creedmoor, these are tight to stop them from falling out.
- Downloads
- 74
- Likes
- 8
- Rating
- 0
P
PrintablesSmall Target
Frankford Arsenal X-10 Bullet Collator Plates for 223, 308, Creedmoor, 300 Blackout, 9mm, 38, 357, 45 ACP
Bullet feeder plates that fit the Frankford Arsenal Bullet Feeder. Rifle bullet plates are not available from FA, and each of the pistol calibers are purchased seperately (with a bullet dop and seater). I built these to fit the collator…
- Downloads
- 72
- Likes
- 6
- Rating
- 0
P
PrintablesPeter Farell
Draft Resurrection : Moorish Style Sleeve.
Moorish Style Sleeve for Home made oil lamp made out of mason jars Just slip it over the top. Made with Gimp, Inkscape, Blender, Tinkercad and Makeprintable. In that order. Pretty sure I used the array modifier along with the curve…
- Downloads
- 71
- Likes
- 15
- Rating
- 0
P
PrintablesPeter Farell
Moorish Candle Sleeve- Draft Resurrection
Moorish Style Sleeve for Home made oil lamp made out of mason jars Just slip it over the top. Made with Gimp, Inkscape, Blender, Tinkercad and Makeprintable. In that order. Print instructions Unassociated tags: oil lamp Category: Decor
- Downloads
- 66
- Likes
- 15
- Rating
- 0
P
PrintablesPeter Farell
Moorish Style Sleeve - Draft Resurrection.
Moorish Style Sleeve for Home made oil lamp made out of mason jars (Draft Resurrection) Just slip it over the top. Made with Gimp, Inkscape, Blender, Tinkercad and Makeprintable. In that order. Print instructions Unassociated tags: tea…
- Downloads
- 64
- Likes
- 11
- Rating
- 0
P
Printableschal
Moorebot Scout Antenna Mount
Morebot Scout top adaptor for a wifi antenna. 09.22.2023: Second version with HEX shape to prevent the turning of the connector.
- Downloads
- 64
- Likes
- 9
- Rating
- 0
P
PrintablesTomson Design
6.5 Creedmoor CZ ammo box
I got a request for 6,5 Creedmoor ammo box. The spacing is 20pcs/75,24x12,60mm between the insert top and bottom. Plz read the dimensions before printing. I made a little headroom but let me know if you have another 6.5 creedmoor that…
- Downloads
- 64
- Likes
- 9
- Rating
- 0
P
Printablesjattie
Divider, Moore and Wright, Sheffield England
Just wanted to capture the original model to use in the making of a case to store it.
- Downloads
- 63
- Likes
- 22
- Rating
- 0
P
PrintablesPeel
Sailboat Mooring Chock
My sailboat's mooring lines were getting frayed due to rubbing over the aluminum toe-rail, and I didn't care to install a standard deck chock as that would require drilling holes into the deck on the boat. This design snaps onto the…
- Downloads
- 55
- Likes
- 24
- Rating
- 0
P
PrintablesJaro3D
Mooring hook with magnetic slider
Hello this time mooring hook with magnetic slider. this device allows to wrap rope around both end closed pipe or thin tree. I have used 2x 8x2mm magnets for holder and 2x 5x1mm magnets for slider. comes with handle and handle extension.…
- Downloads
- 54
- Likes
- 6
- Rating
- 0
P
PrintablesTomson Design
6.5 Creedmoor Mossberg ammo box
I got a request for 6,5 Creedmoor ammo box. The spacing is 20pcs/75,24x12,60mm between the insert top and bottom. Plz read the dimensions before printing. I made a little headroom but let me know if you have another 6.5 creedmoor that…
- Downloads
- 50
- Likes
- 9
- Rating
- 0
P
PrintablesModel Magic
Circus of the Past - Oddities - John Robinson's Ten Big Shows - Skinny Man (George Moore) - 1905
Circus of the Past - Oddities - John Robinson's Ten Big Shows - Skinny Man (George Moore) - 1905 3D printable model.
- Downloads
- 48
- Likes
- 13
- Rating
- 0
P
Printablesbrass_ring
6mm Creedmoor Stacking Loading Block
6mm Creedmoor stacking loading block with a clearance of 20 mm for powder funnel. This is a work in progress, so check for updates before printing. Category: Tool Holders & Boxes
- Downloads
- 46
- Likes
- 4
- Rating
- 0
P
PrintablesTomson Design
6.5 Creedmoor ROSSI ammo box
I got a request for 6,5 Creedmoor ammo box. The spacing is 20pcs/75,24x12,60mm between the insert top and bottom. Plz read the dimensions before printing. I made a little headroom but let me know if you have another 6.5 creedmoor that…
- Downloads
- 43
- Likes
- 9
- Rating
- 5
P
PrintablesC&G Creations
6.5 Creedmoor Load Development Case - 5-Hole V3
I updated this per request of a Printables member for .270 WIN. I designed this for my 6.5 Creedmoor, but it will fit many cartridges with a head diameter of 0.473" (12.04mm). It is designed for the projectile pointing down, into the…
- Downloads
- 38
- Likes
- 4
- Rating
- 0
P
PrintablesPeter Farell
Aluminum Can Moorish Sleeve
Aluminum Can Moorsih Sleeve
- Downloads
- 34
- Likes
- 28
- Rating
- 0
P
Printablesahn94
6.5 Creedmoor Case Trimmer Adapter fits TriWay Case Trimmer
This 6.5 Creedmoor case trimmer adapter is created to be compatible with the TriWay case trimmer.
- Downloads
- 31
- Likes
- 3
- Rating
- 0
P
PrintablesBrinohm
Daelin Proudmoore Statue - World of Warcraft (WOW)
This is the Daelin Proudmoore statue located in Boralus (Battle for Azeroth expansion). Extracted from WOW using WoW Model Viewer and cleaned up using 3D Builder and Meshmixer. I always try to print these myself (this was printed in Ziro…
- Downloads
- 27
- Likes
- 5
- Rating
- 0
P
PrintablesEOLO
SOPORTE BICHEROS 19mm + 25mm MOORING HOOK
SOPORTE BICHEROS 19mm + 25mm MOORING HOOK Category: Other
- Downloads
- 25
- Likes
- 3
- Rating
- 0
P
PrintablesRuebarb
Case Feeder Dillon 550 6.5 Creedmoor
Original File https://www.thingiverse.com/thing:4266244 This will not work with 308, this is designed for 6.5 Creedmoor only WATCH ALL 3 Videos Enjoy! In Action https://www.youtube.com/watch?v=TqsXkGKeaGE Parts Preparation…
- Downloads
- 24
- Likes
- 3
- Rating
- 0
P
PrintablesMakerbee Lab
Battery cover for Moore & Wright MW110-15DBL Digitronic caliper
Print it in good resolution, layer height of 0.1mm helps, also solid infil. It prints on the ribbed part down with some supports. It was scanned using ordinary scanner (paper scanner) and then traced around, measured, and designed.
- Downloads
- 24
- Likes
- 1
- Rating
- 0
P
Printablesbrass_ring
22 Creedmoor Vase Mode Stacking Loading Block
22 Creedmoor Vase Mode stacking loading block. This is a work in progress, so check for updates before printing. Category: Tool Holders & Boxes
- Downloads
- 23
- Likes
- 3
- Rating
- 0
P
Printablesflowmage
Forest Shuffle: Dartmoor + Exmoor Organizer/Insert
This organizer supports the Forest Shuffle Dartmoor stand-alone game and the Exmoor expansion. It has a much larger scorepad opening, and the exterior is resized to fit the slightly different box size compared to the first game. Card…
- Downloads
- 22
- Likes
- 2
- Rating
- 0
P
PrintablesAl Printfast
Reborn 2 Mount for Nevermoore Filter + Bouwden and Canbus-cable clip
Mount for Nevermoore Filter behind the printbed i reused the original metal holder (fit behind this holder, screwed with t-nut to the top beam) Flying Bear used it for the bouwden insert, also fix bouwden and Canbus-cable out of the way
- Downloads
- 20
- Likes
- 5
- Rating
- 0
P
PrintablesMakatea
Warning sign: mooring prohibited, no boat dock! colored without mmu, german and free text
This is a warning sign: docking of ships is prohibited. It is available in different versions and can also be printed in color without mmu, as the colors are changed at different heights. The size can be adjusted using the slicer if…
- Downloads
- 20
- Likes
- 3
- Rating
- 0
P
PrintablesRuebarb
Dillon 550 6.5 Creedmoor Case Feeder Collator Drop Tube
Drop Tube for 6.5 Creedmoor Case Collator 3 perimeter, 3 top/bottom Dillon Switch# 13779 Springs: Used 5/8 & 1/2 https://smile.amazon.com/gp/product/B07HHW8F3K Pipe https://smile.amazon.com/gp/product/B016Y8PXPS/ Flange…
- Downloads
- 19
- Likes
- 1
- Rating
- 0
P
PrintablesSaguaroTac
Gridfinity 6.5 Creedmoor Headpsace Gauge Organizer
PLA, 0.4mm nozzle, 0.2mm layer height 3 walls, 3 top and bottom layers. 10-20% infill, gyroid infill is the go to for my gridfinity organizers.
- Downloads
- 19
- Likes
- 3
- Rating
- 0
P
Printablesbrass_ring
22 Creedmoor Stacking Loading Block
22 Creedmoor stacking loading block. This is a work in progress, so check for updates before printing. Category: Tool Holders & Boxes
- Downloads
- 18
- Likes
- 2
- Rating
- 0
P
Printablessongdawgdesigns
.22 Creedmoor Ammo Box – 3D Printable (Magnet-Lock Lid)
This 3D printable ammo box is purpose-built for .22 Creedmoor , sized around the 80gr Hornady load with a little extra clearance for versatility across similar loads. The design features precision-fit internal compartments to keep your…
- Downloads
- 18
- Likes
- 1
- Rating
- 0
P
PrintablesPan Wołodyjowski
Mymoorapelta
Ankylosaur from the Jurassic Morrison Formation.
- Downloads
- 18
- Likes
- 4
- Rating
- 0
P
PrintablesOllis Modellwerft
Mooring Line Rack Model Scale 1/50
This is a model of a mooring line rack, like it's used on many common tugboats worldwide. The model is designed on a scale of 1/50. The size and therefore the scale can of course be adjusted by scaling. Due to the form, scale and size,…
- Downloads
- 17
- Likes
- 2
- Rating
- 0
P
PrintablesSsooz
Rifle Safe Flag - 6.5 Creedmoor (French)
Remixed this chamber flag to have a tighter fit in the barrel and allow it to pivot a bit more towards the rifle's body. Translated the original “No Pew” for something more formal and in french.
- Downloads
- 16
- Likes
- 2
- Rating
- 0
P
PrintablesRuebarb
openBulletFeeder - 6.5 V2 Creedmoor Collator Plate
6.5 V2 Creedmoor Plate. Collating these very long boat tail 6.5mm are a challenge, they like to ride above, angle your feeder at 45 Degrees, the more in the collator, the better the result. For the original, smaller, OBF. Clutch plates…
- Downloads
- 15
- Likes
- 1
- Rating
- 0
P
PrintablesFenris Drakke
22 creedmoor dummy / snap cap
My recomdation for is petg as a material for durability and atleast 4 walls in the bottom
- Downloads
- 14
- Likes
- 1
- Rating
- 0
P
PrintablesEmjay
Engineering Square Case - Moore and Wright - 150mm
Simple case to keep the square protected when not in use
- Downloads
- 12
- Likes
- 0
- Rating
- 0
P
PrintablesMike
Scale Calibration Weight Holder for use with Creedmoor TRX-925 Weights
This is a simple holder I designed to hold the three calibration weights used with a Creedmoor TRX-925 scale. The holder can be made out of just about any material.
- Downloads
- 12
- Likes
- 1
- Rating
- 0
P
PrintablesPaul Callahan
Moore neighborhood tiles for visualizing 2-state cellular automata
These five tiles fit together like jigsaw pieces and can be used to explore 2-state Moore neighborhood cellular automaton, the most famous example being Conway's Game of Life . Note: the tiles are shown with two colors for clarity though…
- Downloads
- 11
- Likes
- 0
- Rating
- 0
P
PrintablesZuippe
6 Creedmoor (C.I.P.)
Height is the only firm spec for the bullet. Shape is a best guess. Print using Line width: 0,4mm Layer height: 0,2mm Bottom Layers: 3 Walls: 3 Infill: 0%
- Downloads
- 11
- Likes
- 1
- Rating
- 0
P
PrintablesDraftYeti
Moore & Wright Micro 2000 USB Backplate
A replacement backplate for a Moore & Wright Micro 2000 micrometer. These use a NiCad battery that's impossible to buy these days, this is a cheap conversion that makes it USB powered, you could find a ~5v LiPo cell or something and shove…
- Downloads
- 11
- Likes
- 0
- Rating
- 0
P
PrintablesRuebarb
openBulletFeeder - 6.5 Creedmoor Collator Flip Plates
These are both Flip plates for 6.5mm, will flip your nose down. They should work with just about any rifle caliber, but I have not tested it beyond 6.5. This works with my 6.5 Collator Plate https://www.thingiverse.com/thing:3547180 These…
- Downloads
- 10
- Likes
- 1
- Rating
- 0
P
PrintablesWildManMakes
25rd Reloading Tray .308 .243 .22-250, Creedmoor, .338, .260, .358, .300WSM
Reloading trays for any bullet using a .308 parent case and a 300wsm, choose the file that suits your calibre. I can produce files for other calibres on request
- Downloads
- 10
- Likes
- 2
- Rating
- 0
P
PrintablesBlender Enjoyer
Dartmoor CANDY PRO stopper
I lost it so i need to make my own. Printed with PET-G on 0.1mm layer height and i sugest to print like that.
- Downloads
- 10
- Likes
- 1
- Rating
- 0
P
PrintablesEasy Target
Windsock mooring and spinner
(Printed but not mounted yet, I'm still waiting for a windsock to arrive, once it does I'll post the usual action-shots) A simple windsock spinner and mooring post based on the ubiquitous 608-Z skateboard bearing. I designed this to go on…
- Downloads
- 9
- Likes
- 1
- Rating
- 0
P
PrintablesRuebarb
openBulletFeeder - 6.5 Creedmoor Collator Plate
6.5 Creedmoor Plate. Collating these very long boat tail 6.5mm are a challenge, they like to ride above, angle your feeder at 45 Degrees, the more in the collator, the better the result. You will need to use my Flip plate/s for the nose…
- Downloads
- 9
- Likes
- 0
- Rating
- 0
P
PrintablesJaro
SMOOREZ Keychain
This is the improved version of the original SMOOREZ keychain made by me, which appears in his videos. I am the designer, all rights for the keychain go to SMOOREZ. – SMOOREZ Channel – https://www.youtube.com/@SMOOREZ
- Downloads
- 9
- Likes
- 1
- Rating
- 0
P
PrintablesRuebarb
openBulletFeeder - 6.5 Creedmoor Drop Tube Big Switch Small Spring
The 6.5 Creedmoor Drop Tube Big Switch Small Spring from AmmoMike83's (all credit to him) OpenBulletFeeder, https://www.thingiverse.com/thing:2504314 , The one included in the project has the wrong ID of 0.258. I have corrected the ID,…
- Downloads
- 8
- Likes
- 2
- Rating
- 0
P
PrintablesJürgen Jester
Wiesmoor Led Licht
If you love your little town as I do, you may live in Wiesmoor too. That's the reason why I made this nice Wiesmoor coat of arms LED Light, that fits perfectly in a bar as well as in your bookshelf. If you have problems in the assembling,…
- Downloads
- 8
- Likes
- 2
- Rating
- 0
P
PrintablesTriste Han
E46 Phone mount 1 inch ball remix from Samuel Moor
Remixed from Samuel Moor . Original model use a 17mm ball for generic phone holders. Modified to 25.2mm ball for RAM 1 inch ball system. Also made the ball arm stronger (8mm dia. to 10mm).
- Downloads
- 7
- Likes
- 0
- Rating
- 0
P
PrintablesAlluring
Quarrymoor Heavy-Haul Loco Scale Model
A detailed 3D-printable model of a 2000s heavy-haul AC diesel freight locomotive featuring a wide safety cab and long engine hood. Inspired by real-world quarry operations, this slim, tall design stands upright on separate three-axle…
- Downloads
- 7
- Likes
- 1
- Rating
- 0
P
PrintablesAdlerauge83
Moorhuhn Medaille
original besteht aus selbst zusammen geklebtem Holz und Blech mit einem benutzem Diabolo in der mitte. AUF Dauer war dieses aber zu aufwendig her zu stellen deswegen der entwurf für den 3d drucker .wird für die Siegerehrung nach dem…
- Downloads
- 7
- Likes
- 0
- Rating
- 0
P
PrintablesClive Harris
Les Moore
Customized version of http://www.thingiverse.com/thing:1074909 Created with Customizer! http://www.thingiverse.com/apps/customizer/run?thing_id=1074909 Instructions Using the following options: build_plate_selector = 1 fontSize_3 = 3…
- Downloads
- 6
- Likes
- 0
- Rating
- 0
P
PrintablesTaka tech lab
modular 100-round loading block 308 creedmoor
Overview Precision long-range shooting demands consistency, not just in your brass and powder, but in your workflow and environmental conditions. This modular 100-round loading block is specifically designed for the .308 Winchester and…
- Downloads
- 6
- Likes
- 2
- Rating
- 0
P
PrintablesMarcinek
Air tag holder for velo dartmoor (27.2mm) seat
All you need is some screews screw width: 1x 5mm 2x 3mm
- Downloads
- 5
- Likes
- 2
- Rating
- 0
