3,698 models
Remix of a design by J-Max from https://www.thingiverse.com/thing:1306832 These are corner square clamps in 30 variations used for woodworking to hold two pieces 90 degrees square during a glue-up or pocket-hole join. Regular clamps of…
Print approx. €8.67–€10.60 excl. taxPreliminary estimate for one variant
Skyscraper modeled onscreen on YouTube. I used PLA, 0,10 mm layer height and 0.4 mm nozzle. You dont have to use any supports and 5 % infill is fine. In this configuration, it will take roughly 17 hours to print.
Print approx. €11.27–€13.77 excl. taxPreliminary estimate for one variant
Clamping Knobs for metric screws and nuts. Sizes: M4, M5, M6 and M8 Just press the screws or nuts in - rescale in your slicer if they need a different fitting. The provided gcode includes all sizes. Happy printing! Print instructions…
Print approx. €0.89–€1.09 excl. taxPreliminary estimate for one variant
I added holes to allow fixing this Zipper Slider Jig with clamp . Clamp can be used on the sides, front or back
Print approx. €1.47–€1.80 excl. taxPreliminary estimate for one variant
This is a wall mount designed for LEGO F1 Speed Champions sets. The most popular commercially available mount for these sets (which this model was inspired by) requires the use of screws, which is not always an option for renters or if…
Print approx. €0.45–€0.55 excl. taxPreliminary estimate for PETGSource material: PET
Intro A simple cap that changes your mobile phone (or any other LED torch) into a CAMPING LIGHT . The design was inspired by Japanese paper lamps . The cap was designed as simple as possible , so it may be used in the most flexible way.…
Print approx. €0.86–€1.05 excl. taxPreliminary estimate for PETGSource material: PET
The stand should fit the majority of the 8 wide speed champ cars. It's just wide enough to fit the McLaren Solus GT on the bottom and the Merc F1 is too long for the top to give you an idea for scale. The tabs on the ‘Car stacker plate’…
Print approx. €3.11–€3.80 excl. taxPreliminary estimate for one variant
PRINT, ASSEMBLE, and USE AT YOUR OWN RISK Barbell collars can be cheap or expensive… I figured I could make custom ones for 3D printing gym enthusiasts! Two sizes are available in the zip folders: Ø2" will fit slightly loose on Olympic…
Print approx. €6.67–€8.15 excl. taxPreliminary estimate for PETGSource material: PET
This is a remix with the universal hooks for the Ikea Skadis pegboards.
Print approx. €0.61–€0.75 excl. taxPreliminary estimate for one variant
For those of you with ECM Manufacture coffee machines, here's a model of a tamping station or stand for your standard or naked portafilters. Best to do it in ABS or PETG as PLA may melt with a hot portafilter.
Print approx. €7.79–€9.52 excl. taxPreliminary estimate for PETGSource material: PET
To make the trap you just print the lid and fill the jar with sugar water and yeast. The fermentation will generate CO2 which attracts the mosquitos they fly in the cone and get trapped. Turns out it attracts other pests like bald faced…
Print approx. €1.48–€1.81 excl. taxPreliminary estimate for one variant
First you print the top 2 times, with the top down. there is no support needed inside the hinges. After that you can print all legs and hingepins. They all store easily inside and give you a wide range of table heigths. Assembly is super…
Print approx. €8.29–€10.14 excl. taxPreliminary estimate for one variant
Those feet have a 70° degree of freedom to accommodate the angles of the MH500 chair from decathlon . Perfect for wet grass or uneven terrains. In PLA. The ball part has a full membrane on the bottom for easy printing. Use painters tape…
Print approx. €1.97–€2.40 excl. taxPreliminary estimate for one variant
Lampička s obličejem Chase z Tlapkové patroly slouží jako lampička do dětského pokoje. Je ovládaná skrze kapacitní tlačítko, které řídí zvyšující (step-up) měnič pro LED pásek. V lampičce je umístěn i USB-C Li-Pol nabíječka baterií pro…
Print approx. €1.15–€1.41 excl. taxPreliminary estimate for PETGSource material: PET
This clamp will hold a table cloth in place. Tie a knot in two trash bags and hang them in the slot for recyclables and rubbish. Or use the slot as a place for dish clothes (they may also need a knot). Tie rope or paracord for one end of…
Print approx. €5.58–€6.82 excl. taxPreliminary estimate for PETGSource material: PET
I recommend using my gcode if you have a Prusa. PLA Lightning infill no supports 0.15 mm layers
Print approx. €0.51–€0.63 excl. taxPreliminary estimate for one variant
Print in the original orientation of the STL file. Enjoy printing! Prints without supports Dimensions: 32*32*32mm when collapsed. Might need a little bit of breaking in. Based on this LEGO Minecraft magma cube. I saw it and immediately…
Print approx. €1.30–€1.59 excl. taxPreliminary estimate for one variant
You can glue a 10 x 1.5 mm round magnet in the base. Print instructions Recommended infill angle: 0° Low speed and high temperature will create a shiny top surface. There are "holes" inside the model to make some of the top layers more…
Print approx. €0.94–€1.15 excl. taxPreliminary estimate for one variant
Vampire Teeth – 3D-Printed Halloween Accessory Perfect for your vampire costume: these lightweight, reusable vampire teeth are 3D-printed and, with PLA Glow , deliver a spooky glow-in-the-dark effect. Easy to print, quick to assemble, and…
Print approx. €0.25–€0.31 excl. taxPreliminary estimate for one variant
I really liked Todd Pousson's design for an Olympic Barbell Vertical Wall Mount , but wanted to mount the barbell holder on a brick wall and use larger bolts to secure it. I designed the mount from scratch and added in the required holes…
Print approx. €1.96–€2.39 excl. taxPreliminary estimate for PETGSource material: PET
Printing The model has two parts: The SPQR text between the laurel branches The pedestal support Both of these can be printed in place. I've tested them with 0.2mm and 638.27% scaling (this makes the SPQR text 4 mm thick). For printing…
Print approx. €0.36–€0.44 excl. taxPreliminary estimate for one variant
There are 2 GCODEs included. One of them irons the top of the print to give it a smooth and gapless finish, but it is almost 25 minutes longer…
Print approx. €0.43–€0.52 excl. taxPreliminary estimate for one variant
Vampire Dental Prosthetics, Zombie Teeth, R, Perfect for Halloween Costumes, Carnival Mask Shows, Photography Props & Theme Parties, Halloween Costume, Carnival, Dramatic Effect Teeth
Print approx. €0.37–€0.45 excl. taxPreliminary estimate for one variant
Hello! Forgot to add the boot/cap/cover to your RJ-45 cable and you crimped it already? been there, done that. Hope this helps. This is a work in progress (W.I.P.) as it's not the easiest print using FDM printers, yet. Update 2022-09-07…
Print approx. €0.42–€0.51 excl. taxPreliminary estimate for one variant
The Olympic Rings in one modell. You don't need the MMU2S for the color change. The rings are on different heights, that you can use the general color change at PrusaSlicer. Note the sequence of the color change. Start with blue change to…
Print approx. €0.23–€0.29 excl. taxPreliminary estimate for one variant
Print all 3 files with 100% infill and in a material that is suitable for outdoor use. E.g. PETG.
Print approx. €0.82–€1.00 excl. taxPreliminary estimate for PETGSource material: PET
V2 is updated to include 10Lb and 5Lb weights, a chamfered edge to make it easier to tell edge to edge plates apart, improved fit tolerances, and a bar with integrated gripping hands. Per izkariot_438646 's suggestion, I've also added a…
Print approx. €2.47–€3.02 excl. taxPreliminary estimate for one variant
The plug can be used to close PTFE pneumatic tube fittings when not in use. For example, on a modified RepBox this can be used to avoid humidity entering the box. the plug has an inner cone which will clamp onto filament when inserted.…
Print approx. €0.44–€0.54 excl. taxPreliminary estimate for PETGSource material: PET
The Vampire Flower that only opens on the full moon.
Print approx. €2.39–€2.92 excl. taxPreliminary estimate for one variant
I first ran across “Yet Another Dice Tower v2” years ago and printed many copies for myself and friends. Since then I have lost the files and it appears that the original model is no longer available. There are many derivatives of the…
Print approx. €0.53–€0.64 excl. taxPreliminary estimate for one variant
A quick-printing medal for a beer pong competition based on the 2020 Tokyo Olympics medal design. Remixed from this model on Cults by Carlo Scartozzi . I uploaded a blank model for when it is no longer 2023. The sliced model still says…
Print approx. €2.09–€2.56 excl. taxPreliminary estimate for one variant
Tube-shaped sand shovel with a handle and a flat surface at the bottom for tamping the sand. Also can be used for different materials like soil or gravel. Thanks to the narrow shape it's perfect to fill flower pots, where are plants…
Print approx. €4.44–€5.43 excl. taxPreliminary estimate for PETGSource material: PET
The toilet seat wouldn't stay up by itself. This holds the toilet seat and has a nice snap function when closing.
Print approx. €0.88–€1.08 excl. taxPreliminary estimate for one variant
A very stable and safe stand to be used with a 67mm gas bottle.
Print approx. €4.01–€4.90 excl. taxPreliminary estimate for PETGSource material: PET
The air pistol holder functions as a vise, clamps to the table and the trigger of the pistol is inserted into the upper part and the pistol is held in the holder in this way. Here are the instructions for printing the individual parts.…
Print approx. €5.98–€7.31 excl. taxPreliminary estimate for PETGSource material: PET
Empire coaster
Print approx. €3.35–€4.09 excl. taxPreliminary estimate for one variant
Inspired by the adjustable foot I found on Thingiverse ( https://www.thingiverse.com/thing:3154181 ) I realised my own design that does not need any screws to attach it to the IKEA Lack table foot. The foot just has to be cut down by at…
Print approx. €2.77–€3.38 excl. taxPreliminary estimate for PETGSource material: PET
Printed with the MMU2S, 2 colors. Text in ITA but with prusaslicer 2.6.0 you can edit it. Font name: Marvel (link: https://www.fontspace.com/marvel-font-f32182) In pictures: Prusament PLA: Lipstick Red Prusament PLA: Jet Black Prusament…
Print approx. €0.75–€0.92 excl. taxPreliminary estimate for one variant
A useful little helper for woodworking
Print approx. €22.16–€27.09 excl. taxPreliminary estimate for PETGSource material: PET
🧛 MUAHAHAHA 🦇 A fun and rather simple Vampire statue that I made mostly in Tinkercad, I came up with it to be the antagonist of the adventures of a little boy. This vampire always comes to town to cause trouble, tends to come back in…
Print approx. €1.68–€2.05 excl. taxPreliminary estimate for one variant
Logo for the FIA World Endurance Championship looks great
Print approx. €1.45–€1.77 excl. taxPreliminary estimate for one variant
I purchased the tool for my xLDC Quick Release to make it easier to crimp the ribbon cables. This is because more connectors have to be crimped with the xLCD than with the quick release of the MK3S+. You need a quick release if you want…
Print approx. €0.31–€0.37 excl. taxPreliminary estimate for PETGSource material: PET
Height-adjustable, clamping handle for the file. It is quite difficult to hold and work the file in your hand, so they are provided with handles for ease of use. I offer a replaceable, clamping handle. It can be adjusted in height by…
Print approx. €1.59–€1.95 excl. taxPreliminary estimate for one variant
Can be printed with desired color or spray painted. 3 inch diameter metals. Supports: no Infill: 15% Layer: .2mm Nozzle: .4mm
Print approx. €1.20–€1.46 excl. taxPreliminary estimate for one variant
EN: Modification v.1B of the newly designed replacement cap for the 20L Campingaz water canister. Cap see : https://www.printables.com/model/1247949-campingaz-cap-replacement-campingaz-verschlusskapp Tube diameter outside 24,5mm.…
Print approx. €0.62–€0.76 excl. taxPreliminary estimate for one variant
Here's a simple replacement for the broken catch on your camping stove case. Print in PETG (PrusaSlicer standard 0.2mm QUALITY setting,0.4mm nozzle) Fifteen minutes or so print time, which is about the time it takes to find two suitably…
Print approx. €0.20–€0.24 excl. taxPreliminary estimate for PETGSource material: PET
There are lots of simple headphone holders on Printables and Thingiverse, but after printing and testing a few I found a few issues: Generally not stiff enough, they bent when applying enough clamping force to keep stable on the desk If…
Print approx. €3.47–€4.24 excl. taxPreliminary estimate for PETGSource material: PET
This jig helps to clamp and glue miters at different angles (not only 45° angles). You need three clamps and two jigs to apply the jigs to one corner/miter. To prevent from slipping while clamping, I recommend to apply sand paper with…
Print approx. €1.55–€1.90 excl. taxPreliminary estimate for PETGSource material: PET
During the summer period, humpback whales do live in the sold polar waters - so it could be assumed, that the water in the cooling system is also cold ;-) I would recommend printing the base in a (dark) blue color, the whale in grey. If…
Print approx. €2.17–€2.65 excl. taxPreliminary estimate for one variant
We lost the foot on our camping chair. That would't be so bad if not always dirt come into the aluminumprofile, that then lands in the Camper. In addition, the aluminum cuts our camping carpet. So I decided to draw a foot for the chair.…
Print approx. €0.37–€0.46 excl. taxPreliminary estimate for PETGSource material: PET
This extended version offers a clamping length of 115mm and can be used for flour and sugar bags. Prints nicely in PETG.
Print approx. €1.52–€1.86 excl. taxPreliminary estimate for PETGSource material: PET
Secure your rods, pipes, or shafts precision and variety! This 3D-printable Shaft Collar / Clamping Collar Kit offers 2x3 sizes to suit your needs: Big (Ø26-31 mm inner / HIGH L=30) — for larger shafts or tubes. Small (Ø20-24 mm inner /…
Print approx. €0.52–€0.64 excl. taxPreliminary estimate for one variant
LED lampička na USB s dálkovým ovládáním. Lebka vytištěna podle manuálu na thinghiverse. Profil použitý v tomto tisku: LEBKA Filament: Aurapol PLA Methalic Blue Čas tisku: 7h55m Vrstva: 0,15 Podpory: Ano (pouze na spodních místech) Límec:…
Print approx. €3.32–€4.05 excl. taxPreliminary estimate for one variant
To be mounted with two 3mm flat screws (6mm head)
Print approx. €0.16–€0.20 excl. taxPreliminary estimate for one variant
Tisk na dvě poloviny, podpěry, výplň 10%, tryska 0,4, PLA.
Print approx. €2.99–€3.66 excl. taxPreliminary estimate for one variant
EN: I bought water canisters from Campinggas a year ago. These had a tap at the base for drawing off water. However, this was never completely tight, so 1 year ago I designed a cap for this opening. (See…
Print approx. €1.13–€1.38 excl. taxPreliminary estimate for one variant
Bike pump holder - držák pumpičky na kolo
Print approx. €1.97–€2.41 excl. taxPreliminary estimate for one variant
pièce de fermeture du réfrigérateur Dometic pour camping car et caravane
Print approx. €8.52–€10.41 excl. taxPreliminary estimate for one variant
I purchased a new puc and coffee distributor for my Oster expressor machine. I needed something to hold the portafilter steady without making a mess and also to store it all afterards. This simple print will work for most portafilters…
Print approx. €7.20–€8.80 excl. taxPreliminary estimate for one variant
Hello, Today I have a Post-apocalyptic Empire State Building in New York for you. It is made from a photo. It is suitable for coloring, ideal for a diorama. I used PLA/PETG as the material. No need to use supports If you are interested in…
Print approx. €2.46–€3.01 excl. taxPreliminary estimate for one variant
This is a silhouette wall art of the main protagonist of the Japanese show Vampire Hunter D. I personally have not seen it, but a friend of mine wanted this image made into a wall piece so I made one. Enjoy! One thing to note on the model…
Print approx. €4.46–€5.45 excl. taxPreliminary estimate for one variant
I made this print to organize the pieces for the game Tawantinsuyu Inca Empire and speed up game setup. I hope you enjoy! To print this you will need to print: 1x card holder with lid 1x goods box 1x goods box lid 1x tapestry box with lid…
Print approx. €2.77–€3.38 excl. taxPreliminary estimate for one variant
Wall mount for lego speed champions line of cars.
Print approx. €1.06–€1.30 excl. taxPreliminary estimate for one variant
Soporte creado para la bicicleta optimus aquila y el inflador Beto 2 way pumping se crea con espacios para que ajuste el tornillo con cierta holgura.
Print approx. €5.22–€6.38 excl. taxPreliminary estimate for one variant
V případě, že se Vám výtisk povede, prosím přidejte fotografii. DĚKUJI If the printout is successful for you, please add a photo. THANK YOU Česky: Jedná se o otočný držák na hodinky Amazfit GTS 3 s možností přidělání na Xiaomi lampu Mi…
Print approx. €1.54–€1.88 excl. taxPreliminary estimate for one variant
If you're a: creature of the night have some sharp teeth looking to impress dress your best dark and mysterious This might be the badge for you. Don't startle people with your alluring smile, give them a gentle warning with a name tag…
Print approx. €0.87–€1.06 excl. taxPreliminary estimate for one variant
A simple stamper with Sith Empire logo remixed from Synth3D model.
Print approx. €1.03–€1.26 excl. taxPreliminary estimate for one variant
A showpiece that is also practical, for holding and displaying your different printbeds. Its an alternative for putting them away in a drawer or laying them on top of the printer enclosure ;) OBS! - The pictures include the company logo…
Print approx. €2.83–€3.46 excl. taxPreliminary estimate for one variant
Das ist eine einfache Spanpratze die ich zum Spannen von Kunststoff oder ungesämten Brettern auf meiner CNC-Fräse verwende. This is a clamping shoe to clamp plastics or unedged wooden boards for my CNC milling machine.
Print approx. €0.84–€1.02 excl. taxPreliminary estimate for one variant
A friend sent me a clamping collar (broken) to duplicate. It turned out to be a good learning experience and was harder than it looks. Challenges included matching thread, creating opening and exiting thread channels, maintaining…
Print approx. €0.51–€0.62 excl. taxPreliminary estimate for PETGSource material: PET
Remake of very old board game from 1969. It evolves kids imagination when they try to create own pictures with colored hexagons. In original game there were 6 colors, now you can print any color you want :-) The main board is set up of 4…
Print approx. €3.12–€3.81 excl. taxPreliminary estimate for one variant
material ASA
Print approx. €1.12–€1.37 excl. taxPreliminary estimate for one variant
EN : When I was designing a cap for 20-liter Campingaz canisters, I also thought of a possible application for use as a shower. The repurposed cap is designed for the lower outlet, where the tap, which often does not seal completely, was…
Print approx. €2.76–€3.38 excl. taxPreliminary estimate for one variant
Anneaux olympiques pour MMU pour décoration. Olympic rings for MMU for decoration.
Print approx. €0.25–€0.31 excl. taxPreliminary estimate for one variant
This model utilizes the Black Diamond Moji R+ Camping Lantern as the LED light source. I chose this camping lantern because it's rechargeable, has full spectrum color and campfire light modes, and it comes with magnets embedded. The 3D…
Print approx. €0.41–€0.50 excl. taxPreliminary estimate for one variant
This design holds 24 MÅLA marker pens . The inner and outer part squeeze together (with common wood/drywall screws) to clamp the pen lids in the organizer, so when a pen is removed the lid stays fixed. Solves a real problem in our…
Print approx. €2.56–€3.13 excl. taxPreliminary estimate for one variant
Stampino per biscotti, ottima idea per gli amanti dei gatti. Alla fine potete decorare i biscotti come più vi piace.
Print approx. €1.91–€2.34 excl. taxPreliminary estimate for one variant
I found that using the cheap hot glue gun from Action is very frustrating because it doesn't grab glue sticks when pressing the trigger. This basically means the stock tool is useless. Granted, this is kind of expected at the 2.99 EUR…
Print approx. €0.11–€0.14 excl. taxPreliminary estimate for one variant
A fully functional replacement for the Campingaz Xcelerate 400 S closure. The two small metal rods need to be reused and there you go: happy printing, happy camping. Zip file added containing VID_20211106_162613619.mp4 where you can see…
Print approx. €1.02–€1.24 excl. taxPreliminary estimate for PETGSource material: PET
J'ai dû remplacer l'hélice d'un petit ventilateur 12V de 150mm de diamètre dans le carré du bateau. La pièce originale comportait 3 pales, petites et dont la forme était manifestement contrainte par les exigences de démoulage. Ce type de…
Print approx. €0.86–€1.05 excl. taxPreliminary estimate for one variant
1lb printable plates for fractional/micro loading an Olympic (2") bar. The 3d rendering preview on printables looks odd because it's displaying negative space as positive space. Mine came out slightly light (as shown), but that's well…
Print approx. €19.37–€23.68 excl. taxPreliminary estimate for one variant
V základnom balení naradia sa nachádzajú iba čeľuste s veľkosťou D50 a D75. Tovarový katalóg uvádza že si môžeš dokúpiť dodatočne ešte D 32,40,56,63,90. Tieto rozmery sú pre odpadové a kanalizačne rúry. Ja som potreboval hlavne čeľuste…
Print approx. €5.03–€6.15 excl. taxPreliminary estimate for one variant
Clamping block for the Rothenberger ROCUT 110 for fixing PVC, PE, PP, PEX, PB, and PVDF pipes with a diameter of 63 mm. Like original part no. 55023. The blocks can be mounted to the ROCUT 110 device with an M8 bolt (M8 x 30) and an M8…
Print approx. €7.89–€9.64 excl. taxPreliminary estimate for PETGSource material: PET
This is a replacement handle for solar lanterns. These types of lanterns can often be found in home improvement or dollar stores and they can be hanged on a wall or railing with the included handle and hook. I have two of these lamps, but…
Print approx. €0.32–€0.39 excl. taxPreliminary estimate for one variant
Title: Anti-ant Olympic cauldron stand for Dulf vase This pot is designed to protect your sweets from pesky ants. By adding water to the base, you create an effective barrier that keeps your candies safe. Additionally, it serves as an…
Print approx. €4.60–€5.62 excl. taxPreliminary estimate for one variant
A bracelet with "Pumping Station:One" debossed on it. Created with FreeCAD, using the Curves workbench. The FreeCAD files contain the dimensional values in a spreadsheet, including alternate sizes: extra-large and small.
Print approx. €1.36–€1.66 excl. taxPreliminary estimate for one variant
Es una bandeja con tres departamentos en forma de suela de zapato que hace mucho servicio.
Print approx. €3.32–€4.06 excl. taxPreliminary estimate for one variant
The knob can be attached to the cabinet drawer with an M4 bolt. The threads of the bolt will self-tap in PLA, PETG, or ABS plastic. Pumping Station:One is a hackerspace in Chicago, Illinois. It has a world-class woodshop and many members…
Print approx. €0.63–€0.77 excl. taxPreliminary estimate for one variant
Just a collection of all the keychains I've made but in one place
Print approx. €0.59–€0.72 excl. taxPreliminary estimate for one variant
Bonjour, Ce sont les caches des trous des 4 vis de fixation de mon frigo dans mon camping car. Le camping car est un Rapido et le frigo est un Electrolux RM 4230. largeur extérieure 20mm, largeur axe 9.5mm Belle journée. MC
Print approx. €0.45–€0.55 excl. taxPreliminary estimate for PETGSource material: PET
Soporte para limpiadores tunze de acuarios, para proteger la cuchilla y el iman del limpiador.
Print approx. €2.45–€2.99 excl. taxPreliminary estimate for one variant
I honestly have never played Rainbow 6 but my friends say it good so I made this logo for them. It comes with a stand. I would recommend setting the scale to 300 but I made it smaller for a key chains.
Print approx. €2.44–€2.98 excl. taxPreliminary estimate for one variant
Enjoy!! As you like use it!!
Print approx. €12.39–€15.14 excl. taxPreliminary estimate for one variant
Náhrada za ulámané špičky zahradních solárních lampiček. Průměr 22 mm , délka 80 mm . Materiál PETG . Replacement for broken tips of garden solar lamps. Diameter 22 mm , length 80 mm . Material PETG .
Print approx. €0.57–€0.70 excl. taxPreliminary estimate for PETGSource material: PET
Il faut imprimer la trappe coulisse vers le haut. Pas besoin de support mais il faudra bien gratter les coins pour un bon ajustement. La partie OPEN est fournie dans un fichier SVG annexe. Pour le mettre en place utilisez clic droit sur…
Print approx. €0.67–€0.82 excl. taxPreliminary estimate for one variant
Meet the cutest and spookiest guardian of your Halloween: our Halloween Bat Gnome (SpookyGnome) ! This charming 3D model merges the mystique of a gnome with the classic touch of a bat, creating a unique decorative figure that will capture…
Print approx. €2.31–€2.82 excl. taxPreliminary estimate for one variant
Hello, little vampire alien figure. Enjoy the print!
Print approx. €2.91–€3.56 excl. taxPreliminary estimate for one variant
Hello Printing fellows!! I present you jumping frog! Addictive toy ! FOR EXTRA JUMP USE PTGE!!! Assembling is very easy! If the joint is to loose i recommend to use glue for extra! The joints are your choice iff you need them if no you…
Compilation of parts for my K9 from my team SG-303, plus some moded parts. Instructions avaliable in K9 - DUMMY13
This articulated jumping spider comes in two versions. The first is a single model with eyes. The second version has eye holes and you can either print the eyes separate in a different color or use flat-back beads. You will notice that…
