Counting matching models…
=>This is a Kobra 3 Combo profile for Prusa Slicer . Finally. I made it mainly for non-planar printing and Arc Overhangs enthusiasts because my Kobra 3 did not support non-planar 3D printing at the moment. I could have charged for it, but…
My ladder buckles on my backpack broke, amazon would not replace the backpack but gave me a refund. I didn’t want to throw away the backpack so I looked around for a replacement part, but ended up designing my own. I will try the buckles…
From 20 years of experience as a Sushi Chef, this is my personal, professional Makisu. Thinner and lighter than a bamboo maki mat for less fatigue 20cm width fits Nori Seaweed sheets perfectly. To be able to precisely form the edges of…
If you've ever played a board game with a family that likes to mess with each other more than they want to win the game (like mine), you know that sometimes the simple, neutral game tokens the games usually ship with don't really…
Prints in 2 pieces. The shell and the bullet. The bullet is hollow, allowing for small object to be stored inside.
As the name describes it it's a little adapter that makes it so that you can mount your side mounted spool holder on top of the machine, it's someone else's design originally but I remixed it so that I could mount it on top of my CR10…
Solid model of a .50 Caliber. Prints in 1 piece. No Supports.
Sie können das model als Anschnallgurt benützen
Based on @Consti1606 work. Many have complained about having to scale up for his model, which is due to a very tight fit due to poor dimensional accuracy and lack of tolerances in some areas. The original model left permanant damage to my…
This is my attempt at a dimensionally accurate model of the S21. I used it as a tool to make a case. I have included the .stp in "case" you would like to do the same. The .stp and .stl files should be pretty freaking close to the actual…
neues modell ohne schriftzug und 0.7mm schmaler new model without lettering and 0.7mm narrower
3d Drums: 24" Bassdrum - Sci-Fi-Style: Unique features... unique look... great sound - professionally sound checked... 24"=60cm. Printed 3x yet. On Pro-XXL-Printers. ABS, ASA+Carbon. With infill or solid… No support needed… Sounds great……
I really liked Scott Yu-Jan's iphone 15 standby mode dock, so I made it fit an iphone 12 with a thin hardshell case. I also modified the airpods charger slot to slot in from the other side, so that the rear of the case can be shorter than…
Action Cam ChinMount For HJC I71 (ORGINALLY MADE BY GREGLGOMEZ). I found it useful and it got deleted so here u go. I dont own this model. All credits to original creator greglgomez! This was the original link:…
The sensor for the passenger seats in my car is not working again. Even if nobody is sitting there, the safety system does not stop piping as long as the seat belt is not inserted. Whenever you are alone in the car and the seat cushion…
This game controller holder was originally intended to hold a DUALSHOCK 4 controller with the official back button attachment, as I couldn't find any online that would do that. After designing it and testing it, I noticed that it also…
A chess set (board and pieces) designed in OpenSCAD. Different styles are used for black and white pieces. A variant with cutouts for magnets to be inserted during printing is included. The board consists of 64 square pieces and 8 edge…
Please like this model if you find it useful. A few likes goes a long way so I can make more. Thanks :) Any of the following sound like you? z-offset changes every print! Probe does not seem to work First layer is terrible but it was…
Die Größe wird durch das Band, das durch den Stecker gezogen wird, bestimmt.
I had the original handle break so I modified it to be stronger. I also made it so a bigger spring fits in it.
I really liked the design this is remixed from with one exception: the horizontal span vs the more 'normal' cross that you see on railway bridges. This remix addresses that, but it does mean that the print needs to be about 34mm tall…
A quick model of the AYN Thor I made to try out different colour combos. I have uploaded a STEP file which you can use in Fusion360 to assign different materials. DISCLAIMER: This model is not dimensionally accurate, it should only be…
Between 2009 and 2015, Thinkgeek.com sold the Shark Attack! snack bowl. You can find copies of this today, but they're a cheap knockoff that doesn't even have the teeth moulded. Print your own here! This started as a photogrammetry scan…
Subhanallah "Glory be to God" or "Allah is perfect" EDIT: Do let me know if theres any issues.
Bambu Lab A1 poop Bucket . Since there was no poop bucket that goes over the entire height of the printer, I designed one. No support is needed! V1= Not compatible with AMS lite Top Mount. V2= Compatible with AMS lite Top Mount. (lightest…
I couldn't find this topper anywhere near where I live, so I decided to follow this quick tutorial (*) to model and print it. I printed it about 3.3mm tall and with 3 perimeters to make it strong enough, with a color change for the “PhD”…
Three bits I use for a few games, originally made for Champions of Midgard). Ham / Food Glory / Horn - this model includes a disc that I use to raise it off the print bed for supports. Wood - has a cutoff branch so it does not roll off a…
This is a remix of the gear-mounting bolt for the wonderful yarn winder model posted by BGDglider . The original model worked well for me with one exception: each screw that holds the drive and middle gears in place…
These are fun because they are supposed to be bad. Anyone who's opened a SpongeBob popsicle knows that the placement of the eyes/mouth/teeth can be way off. So there's pretty much zero pressure while building these because the worse it…
I just wanted it for ease of access from Thingiverse. Thanks Imstynes.
The first versions wouldn't hould up to a 30 pound backpack, so I increased the thickness to 15 mm. I've printed it mainly using walls to increase strenght. It hold's up for more than a year now.
English: I created this buckle for my Deuter backpack, because the original one was broken. It's only the female part, because the male part is still o.k.. If I find the time, I will maybe also create the male part. It is not an exact…
You can use a 3M Command™ strip to affix this to the side of your coffee or end table. A rubber band around the gear will give it more grip. I've included the gear as a separate model so that you can print it in a separate color. Also…
Easily add powerpole connectors to a go box, panel, etc. There are a number of other models that solve the same problem that I found, but there were minor things with each I didn't love – I've been using powerpole connectors for a very…
UPDATE Nov 8, 2022: I added a new v2 of the rod holder, based on a clever suggestion by (thingiverse user) @Klober81, which reduces the needed length of metal rods from 12.5" to 12", which saves on purchase cost of metal rods when one…
Die Schnalle diente mir zur Reparatur einer Matschhose, da meine Tochter sie versehentlich kaputt gebrochen hatte. Die Schnalle hält super in der dafür vprgesehenen Halterung
Stratocaster electric guitar with humbucker pickups and accurate dimensions.
Einfach eine Gurtschnalle zum Rangieren auf dem Campingplatz ohne Gurtwarnergepiepst im Rapido Design Print Settings Printer Brand: Anycubic Printer: Large Size Chiron Rafts: No Supports: No Resolution: 200 Infill: 35 Filament:…
Deutsch: Ich habe für mein Auto ein Dummy entworfen, das genau in das Gurtschloss passt, damit bei Kurzstrecken im Wald das Auto nicht ständig piepst. Es gibt insgesamt neun verschiedene Modelle – teils schlicht, teils mit zusätzlichen…
25mm x 40mm Schnalle. Von Grund auf neu konstruiert. Das Gegenstück habe ich noch nicht benötigt.
I had let my partner take my adjustable stand as they need it more than I do, however I needed something to throw my phone on. I made a cutout so you can use the swipe motion from the bottom of the phone. I do not use the charger…
yep the quick release buckle from the deuter schmusebär backpack got lost. the orderable replacement part does't have the right color anyway. so I designed it by my own and print it okay it snaps not so slightly like the original but it…
Just a weird little cryptid for spooky season Based on the design on the cover of Snallygaster: the Lost Legend of Frederick County If you want to help me keep making free models or to tell me what I should make next please check out my…
I own a repair shop in the middle of a small rural area. People, God love them, have trouble figuring out that they need to push the door open, so they wind up standing outside and just knocking. To remedy this, I created these signs. One…
Miniature pieces designed for the game Black Fleet, and made to fit in the ships provided in that game. Great for other games that use cubes for something that could be represented by a barrel, crate, corn, tobacco, or sugar. Instructions…
I am sure you have a variety of Nintendo Switch cartridges—some with the original cases, others without them. It makes sense, then, to store everything uniformly. If only someone could replicate the original shell and pack it full of…
Schraubbare Rucksackschnalle für flexible Gurtbefestigung Diese Rucksackschnalle bietet eine unkomplizierte und elegante Lösung zur Befestigung von Gurten an Rucksäcken, Taschen und ähnlichen Anwendungen. Sie zeichnet sich durch…
Creality Ender-3 V3 SE left side 5015 blower fan duct with optionally ADXL345 vibration compensation sensor holder. This model uses negative volume in the slicer. For the right side I recommend this duct:…
lay all files flat in slicer, move for best space conservation at 30 or 25% of total size, use highest quality setting, and lower speed, recommend 40mm/s.
This is a replacement part for the clips used on Vaude rolltop bicycle bags
Note that this design can be used for many other applications besides the exact replacement part. You can scale down the model to get the clamp size how you want it, then fill and resize the hole to your specs. Broke the original clamp…
Teensyduino 4.0 Dimensionally Accurate with Largest Components. I tweaked an existing model that was not available in STL format. The PCB and components are dimensionally accurate and placed within .25 mm.
in 3d builder mit dem logo von opel erstellt
Really simple and quick-printing “Indusi” / “PZB” inductor (european train signalling and protection system) in n-scale (1:160). Print in provided orientation. The device has been significantly simplified so that it can be printed with…
Gridfinity Baseplate 5x8 for IKEA MICKE storage unit magnets 6x2mm (optionally)
I broke the clip on my backpack and just created a replacement quick 'n' dirty. can be printed with minimum supports. PETG ois a good choice Category: Sport & Outdoors
There are other versions that make use of the existing plastic insert, but I couldn't make use of them as I had already tossed mine when fitting the expansions in the base game box years ago. So, I made my own insert. This insert fits the…
Gürtelschnalle für Engelbert Strauß Gürtel Print in Place
The Lionel Fastrack manual switches have a weak design for the switch stand and lever. It would last a 10 year old kid about 3 minutes before it is broken. I have two switches, both broken. I did order replacement stand and lever for them…
This buckle is for elastics. It is used to tigthen a cpap hose to a elastic For universial use I included severel versions. The example is the 12mm version. The naming is according to the width of the used strap. The printing settings are…
Beste Fellow 3D printers, Who doesn't know the Pythagorean cup???? With this cup you will be punished if you are too greedy. It will then overflow until it is completely empty!! Saw it on the internet and thought, hey, nice to recreate…
I created this model as i needed to print a new carbon filter cover for my P1S and was frustrated with the printability of the current offering with how they are exact copies of the original which was designed to be molded not FDM…
Modified to fit the stock heatsink with volcano heater block . Extra length of the melt zone gives you higher flowrates to allow printing at higher speeds. For the BL-Touch mount check the page of the original model. Note: BL-Touch will…
A connector to connect a 38mm hoose to a 50mm hose or dust extractor. Originally esigned for use with Metabo TS 254 M table saw and Ozito shopvac, but it will probably work on many tools and vacs TPU is ideal because it allows you to…
This is a quick remix of the great model by @DashLambda_103273 to accommodate a New 3DS with: a clear case (like this one: https://a.co/d/bHT1H2H [not an affiliate link, just provided to show you what I used]), and (optionally) a…
Motivation I saw the new soap dishes contest and I finally had an idea of what to do for the last meters contest. → A soap dish that uses less then 5m of filament and thus meets the parameters for the “last meters” contest. Additional…
Eine kurze Version, die gerade aus dem Anschnaller herausreicht und somit nicht abbricht wenn man dagegen kommt
I wanted to put this AP outdoor, even though it's not outdoor rated (do it at your own risk, of course), the place where it's mounted already has a roof, to it will not rain on it, but this mount will protect it even more. I've also…
Just the shape, no labels or branding.
The collet locks that came with the Prometheus System didn't work well for me. I had lost a couple of those because they weren't secure enough, they are wiggly and easily push out from the collets. These are the improved design that is…
This project is an externally accessable M4 bolt driven Y axis belt tensioner for the Taz 6 series printer. Co designed by Kevin Davis It will not work with any other Taz. For older Taz, or to see the general idea of how this works, check…
This eyelet buckle is for elastics. It is used to tigthen a cpap hose to a hook on the ceiling. For universial use I included severel versions. The example is the 12mm version. The naming is according to the width of the used strap. The…
I was looking for an M5 screw Universal tool mount (fromHicWic) for the MPCNC Primo but could not find any. So I used the SCAD model from GeoDave to create the basic model and Fusion 360 to make some adjustments: Fit M5 round-head screws…
3 pieces of medals with a size of 16 cm height and 5 cm in diameter printed from PLA. NO SUPPORTS NEEDED!!!
a simple wall mounted hook with two hooks and inset screw holes. prints great on its back, needs supports that way but not much. havent tried it but i imagine printing on a raft you could print it upright without supports
After needing and not being able to find a model file of a pi3 b+ I made my own. There were a few out there, but things like the holes and ports were not accurate in their positions. This one should be correct for designing things like…
I previously tweeted about this here: https://twitter.com/rwhb2/status/1331992852532957188 but now I've implemented it in OpenSCAD so it is printable and tweakable! The height is a function of the sine of the radius from the centre of the…
This is a fairly standard sized funnel with two internal vents and a recirved lip to help prevent spills if the funnel is tilted.
Für die Besfestigung meiner Abstandanzeige (Kette) an der (Sanlight) LED Die Bohrung muss am ende rausgebrochen (schnitten) werden. Gedruckt mit TPU, 0.16, 10% infill Gyro
A small toy signalling disc for kids to go along with their toy train sets. Signalkelle / Schnaffnerkelle als Kinderspielzeug für Züge. Printing The color indicator can be printed all in one as a multi color print or two separate piece…
My elliptical has rubber feet that are not great. When we've moved the elliptical they've torn apart and make the entire machine unsteady and potentially unsafe, but the replacement feet are hard to find and often prohibitively expensive,…
This model allows you to use the Buddy3D camera with the Prusa XL. It even works with the EnXlosure (but that is tight). This is a multi-remix of multiple models: The 3DBuddy redux model The Heatbed accessory mount The new version 2 has…
Naja viel gibt es nicht zu sagen man steckt die kappe im Auto über den Anschnaller und steck dann den halt Gurt für den Hund durch den schlitz und zack Hund kann nicht mehr auf den abschnallknopf mit den Pfoten drücken Stressfreie für den…
Simple sleeve holder to keep Nespresso OriginalLine sleeves stacked neatly. Customizable using OpenSCAD; the sample 3x6 STL is the largest that fits on my printer. Designed to print at 0.3mm layer height, without supports or infill. Print…
Simple holder for headphones & mic mountable on metal PC cases and other surfaces. Originally designed for Logitech G PRO X 2 Lightspeed and Sharkoon PureSteel case The microphone slots into a small groove on the front. My print…
The Taz 3d printer needs an easier way to adjust the Y axis belt tension, as well as provision to add a Y maximum endstop. This project addresses both those issues. Please note: This project requires drilling a single hole in your Taz Y…
So, i have this old thinkpad x240, but it's mising it's internal battery and the fact that there is empty space in the otherwise very well specced laptop greatly irritates me. I designed this dummy to fill the void in my thinkpad's heart.…
Was looking for a quick and easy way to trim PTFE and found the outstanding model over on Thingiverse. Alas, I find that prints with cut out text on the bottom often mess up prints for most folks and my affinity for the Gridfinity system…
As I struggled yet again with my unpleasant GorillaPod tripod, I realized I had the perfect solution available to me: Create a bracket that I could slide onto my Valoi copy stand that would hold the camera in a horizontal position, using…
Externally Threaded Ultra-Precision Lead Screw T8 x 2.00 mm Thread for Fast-Travel blank. I have seen other designs, but they appear to be made at lower resolutions than mine. Not sure how they were made, mine are made in Fusion360. This…
My take on a powerfull recirculating particle and fumes filter, intended for the Q1 pro. Surely it can be used on other makes/models, I would definitely be interested to hear about if anyone tries! While there are already a few neat and…
This is a strap adjuster, I designed it originally for swimming goggles, the strap is about 8mm wide.
I designed this box for 16 MicroSD cards to fit the lids from 3L apple cider jugs that I buy here in Costco (in Canada). But I also provide a 3D printed lid for people with no access to lids for upcycling. Your extrusion needs to be…
I like the basic design of this blade balancer. On my Prusa Mk3S, I chose to print the parts with PLA using 40% infill and at a 0.10 mm layer height for accuracy in the screw threads as well as for strength and appearance. No supports are…
Definitely NOT a king size Hershey's bar.
This Sudoku is fully printable (if you choose the non-magnetic option) and is divided into separate model files, so you can decide which parts you want to print. For the optional magnetic tiles, I used: heads of push pins with a 10 mm…
Inspired by the Tipong Colliery Railway's 0-4-0 Bagnall named David (although squished down to fit a TU-Koppel), that is going to return to service this year! To assemble snip the front hook thing off the chassis and glue on the front…
Bei der Abdeckung unseres Planschbeckens ist ein Teil der Gurtschnalle gebrochen. Ersatz war nicht zu bekommen und auf Printables oder Makerwold war auch nichts zu finden. Da habe ich es selbst nachkonstruiert. Der Clip hat kein…
This striking piece features the phrase “Eternally Yours” in ornate, vintage-inspired lettering, framed by detailed skulls, deep red roses, and swirling baroque flourishes. The high-contrast palette of black, ivory, and blood-red creates…
![Clamp Lever [originally] for Warrior Table Saw](https://media.printables.com/media/prints/128740/images/1234056_dd1e8e70-10e4-4e63-b1fa-fbef47fbc4a0/20220120_230313.jpg)
![Universal Tool Mount for MPCNC Primo (M5 screws!) [Originally by HicWic]](https://media.printables.com/media/prints/742403/images/5797188_28e1f2af-db42-4e7d-9666-d81e0d0b113c_194fa2d6-951c-4151-a39e-9f6332101b29/universalmount.png)
![Prusa XL + Buddy3D [+ (optional) EnXlosure] = Finally a proper camera! V2.1](https://media.printables.com/media/prints/cc1ff817-1bc4-422b-8db8-b8621fb7fbab/images/9932174_79ba0de8-bcc7-42f4-9842-4478fb3b0da4_d38beba8-87ac-48ba-bcf0-e3dc7d675355/screenshot-2025-06-02-at-163442.png)
