Counting matching models…
This is a canister spout with an integrated air channel that makes pouring liquids much easier and prevents annoying glugging and spilling. It is designed for common 5 liter canisters you can find in European retail markets for distilled…
Basically this is a long screw and nut that can be used to support pretty much whatever needs supporting. In my case I made this to support my GPU since I noticed some deformation in the PCB from sag. These jacks use a metric trapezoidal…
🎯 Recommended Print Settings For Best Results Print this design with a standard 0.4mm nozzle at 0.24mm layer height for that sweet spot between speed and detail. We're keeping it lightweight with just 8-15% infill, which gives plenty of…
Update: 02/03/2023 I am now the proud owner of a Bambu Labs X1CC and am enjoying the AMS. I never printed my Foxy in multi colour at home and was horrified to find issues with this version of the model it which would affect a successful…
A desiccant canister designed to be mounted in the center of a spool of filament during storage to help keep the filament dry. The canister has a lock-ring which threads onto the opposite end from the cap, after the canister has been…
It works like the one in the Illusionist movie (no camera trick needed). The perfect romantic Maker gift. You can use it as a necklace or keychain, it fits 4 little pictures inside. This is one of the coolest things I have ever designed,…
STABLE AND SECURE: Improves adhesion and stability on any surface, prevents canister from wobbling or tipping over. The stand fits for 90mm and 110 mm gas canisters, so you can use it with any camping stove. There are two versions to…
This pouring spout is designed for canisters with DIN threads , commonly found on 10 L and 20 L canisters . An integrated air channel allows air to flow back into the canister while pouring, resulting in a smooth, controlled stream and…
I created some funnels with different sizes of threads/screws that you will find on fluid cans for antifreeze fluids (car) windshield cleaning fluids (car) engine oil (car, motorbike) gear oil (car, motorbike fork oil (motorbike) … The…
Interior diameter is 3.0 inches / 76.2 mm. Interior height is 2.0 inches / 50.80 mm. No supports are required. The model responds very well to scaling in your slicer if you want different sizes. The table below provides scaling factors…
Monsters Inc Scream Canister with text. Top, middle, bottom - 0.3 Black ring, spigot - 0.2 Text, accents and gauge items- 0.16 Remixed model to include a magnetic removeable lid, gauge surround and text, make sure you download the correct…
print can and cap and glue it altogether. You can print in diferent colours for better effect.
A mighty owl-man gardener with natural stealth, night-vision, and a green thumb! Collect them all! If you snap off the top of the plant don't be sad, still looks good :) Check out the FULL COLLECTION HERE:…
As I broke my Firemaple's stand, was looking for similar printable model, with no luck. It is designed close to original part. It should fold to fit inside the pot. Here some specs from their website: With the Canister Stand, it's easy to…
Update Feb25: Thanks for almost 300 downloads! Full Step Files available for Purchase from my Printables Store Here - perfect for alteration and customization. Free STL Files for 3D Printing below: Set of Modular Lens Cases, Protection…
This is a canister spout with an integrated air channel that makes pouring liquids much easier and prevents annoying glugging and spilling. It is designed for common 5 liter canisters you can find in European retail markets for distilled…
Hello, Here is my remix of DIN61 cap. I added 3/4" thread for tap
Printed from Ultra PLA by Noctuo Printed from Ultra PLA by Noctuo. Filaments: -Black PLA UltraPLA -Yellow PLA UltraPLA -Wood Ash PLA Spectrum Printed on Bambu Lab P1S and AMS I recommend printing the base from transparent PET-G with…
Benzinkanister für RC Scaler, natürlich anpasspar für euern Maßstab
This is a 35mm Film Canister Replacement. ******************************************************************************** ATTENTION There is an STL File of the Canister that Works Better with TPU it is labeled: ( Film Canister FOR TPU…
English: This is a hook for the channel rail of a Thule Omnistor 9200/9300 awning. It features a a bracket for some fairy lights. I use this fairy lights with the hook Camplight:…
Didn't fine any eligent solutions to this problem that retained the ball check valve used for priming the filter. So I made one. 1.5mm holes Print with ABS or PETG. I tested both. Settled on ABS as it looked nicer. Pictured is the PETG…
Five statues of well-known communist leaders from history. Happy printing :) Mao Zedong, Vladimir Lenin, Joseph Stalin, Karl Marx, Friedrich Engels
A pretty run-of-the-mill desiccant container. Remixed based on Tenshe's design because the 2mm silica gel beads were too small and fell through the top and bottom holes. I also didn't need the space for the hygrometer, so I was able to…
Here's my contribution to all the quarantine creativity: an approximately life-sized C-20A Rifle used by the Starcraft character Nova. Originally I ripped it from an in-game asset, and then added detail from there based off of numerous…
I'm too lazy to buy this things. Canister cap with 1/2" inside thread for my campervan. Designed for print without supports. I print with Prusament PET-G Orange.
I wanted an on-theme way to store/display my kyber crystals, so I made this! I might eventually make a v2 to accommodate an LED strip to provide some illumination behind the jewels, but that's a job for another day. Parts are split up to…
Simple opening and closing spanner for standard 4- or 8-ribbed lids of canisters between 1L-60L volume (DIN 45 thread, Ø48.2mm | DIN 51 thread, Ø58mm | DIN 61 thread, Ø65mm). Turn tool around or use the included insert depending on the…
Trichter für 5 Liter Kanister zum aufschrauben. Gewinde M39,5 x 4. Es gibt mehrere dieser Trichter, aber bei keinem paßte das Gewinde für meinen Kanister. Empfehle das Gewinde mit der niedrigst möglichen Layerhöhe zu drucken; empfehle…
Mushrooms have inspired incredibly beautiful lamps and other decorative designs, but to my surprise not a single jar or canister. That while I imagened it would be so nice... Let's change that. Here's my impression of what it should look…
Feet for gas canisters used with backpacking stoves. Use three to make the gas canister more stable. They can be stacked
This is a model for an end cap of a Thule Omnistor 5002 awning. Dies ist ein Modell für eine Endkappe einer Thule Omnistor 5002 Markise. Print Settings Printer Brand: Creality Printer: Ender 3 Rafts: Yes Supports: Yes Resolution: 0.2…
1/10 scale off-road fuel/gas canister. Two mounting options - straight through (you'll need an M2x18mm or so - total height is about 12mm) or using the circular disc and mounting to your truck/surface first; then mount the fuel canister.…
Hello, this is a remix from the canister spout to fit canister with a DIN45 thread. They fit on my canister with 2,5 L and 5 L. The cap ring I got from https://www.thingiverse.com/thing:2484159 , it fits very well. Category: Household
This is a stand to add additional stability 3 different types of gas canisters commonly used in backpacking/camping stoves (65mm, 90mm, and 110mm). The goal was to make a gas stand that fits several different sizes of canisters, without…
20litre plastic cansiter for 1/14 scale. For best result, print them as shown in the picture
This file is a 1:1 recreation of a 13/16-in Square Strut End cap from Lowes meant for a CAD model, and is not optimized for 3D printing. I had best results printing this model out of 95A TPU and leaving many of the supports on.
A set of Mini Cansters! Previously I made a set of Sci-Fi inspired canisters . They were big, they were cool, but the smaller of the models weren't as practical because of some of the proportions. The aim here was to shrink the model…
This is a functional and screen-accurate Cryo Canister from the first Jurassic Park movie. Most of the credit goes to BadWolfProps which made the original files and coffeehedake which remixed the middle cylinders to be the right size from…
I copied this here for archiving and to provide others with an easier print. I've adjusted the orientation and provided one that is reduced in size to accommodate 100g canisters. I printed mine in PETG using supports and 4 perimeters for…
New petrol canister lid with Buttres M40x4 thread and with groove for rubber seal. Update 19.01.2024: After 3 years I discovered (and also read) that PETG does not tolerate bio-component (and some additives) in gasoline very well and the…
Deckel für Benzinkanister mit einem Durchmesser von 39mm. Mit TPU Dichtung
I used blender's free CC0 “male_primitive_stylized” from Human Base Meshes v1.4.1 as a base, and applied my custom FDMJoints ( https://github.com/hpaulsen/fdm_joints ) to showcase their versatility. All of the joints except the inner…
Recently rewatched this film and decided to model the Scream Cannister for fun! Also adding a threaded top version that can house a water bottle or can. Currently available is: Solid version w/ Text Solid version w/out Text Hollowed…
Jednoduche ocko do listy
I have shrimp in most of my tanks and have to filter the intake of my Fluval 107 and 207 canister filters to prevent shimp and fry getting sucked in the filter. I designed this because I was tired of dealing with a sponge other the stock…
The Flatliner is an update to the classic nib holder design, with features and specialization for modern cartooning and calligraphy. Designed and refined by working professionals, the Flatliner includes: Snap-fitted cap hexagonal…
Hello all, this is a remix of two existing designs. I have connected the DIN 51 canister cap with a Gardena connector to easily fill canisters with a hose. The Gardena connection requires a standard O-ring.
With this stl file you can print gas canisters for WPL RC Trucks in 1:16 scale or diecast models. The stl file can be rescaled for other scales. The gas canister can be printed without support materials! If there are any questions, please…
This a remix of Ludwig Bre's DIN51 canister spout https://www.thingiverse.com/thing:4314888 which I modified rather heavily. A friend needed a cap for her fuel canister with two 10mm holes for tubes, I kept the third small hole for…
AKA “Hidden Belts Mod” AKA "LR3 Superstrut-encased Y belts" New v2 for LowRider v4: NEW as of October 6, 2023: now either or both Y belts can be hidden. Initially I only hid the Y-max belt (non-rail side) as that's the one I really needed…
A replica of the movie prop that fits in a stash canister
a copy of the fortnite medallion
Print Settings: Printer: Prusa MK2S+ Filament: PETG or PLA Tested with PETG Layer Hight: 0.3 Infill: 5%-10% Rectilinear Exterior Perimeters: 2 Brim: No Heated Bed: Recommended Supports: No Approximated Filament Usage: 11.79m Approximated…
Canister Holder for the Multiboard MultiConnect system, requires 2 https://www.printables.com/model/716558 connectors Different sizes available
This is a model of the Illusionist Heart Pendant, the model can be combined with up to four pictures, one on each side. after printing, go to this link for assembly instructions:
I shoot and home-develop a lot of different film formats. APS has a unique canister, which is fiddly at best, and a PITA at worst. These tools are designed to take the pain out of handling those reels. There are two tools and a…
Dobrý den, Mám pro vás canister pro RC auto, jeep, expedici. Canister ma sroubovaci vičko pro lepsi autenticitu. Canister je ze dvou kusu!!! Tistene bez podpory!!! Pokud vás moje práce zaujala, odkazy jsou zde:…
Easy to print tube with secure screw on cap. Print with black PETG.
Softair bottles arrives usually in carton boxes, once a few have gone the remaining ones wander around and they are under pressure! this canister keeps them in place, full capacity is 13 but, because I carry also maintenance oil bottles,…
The " Spout Canister DIN45 " fits the hole in the remixed " DIN45 Canister Cap ". I've found the other cap to be better than the original spout cap, so now you have a choice of two.
Part 1 - Stands and Locks. For Part 2 - Rods and Spacers, see: https://www.printables.com/model/328943 These are my improvements for the ingenuous OmniStand v1.36 by Baron Williams - the replacement stands and rods for the FlashForge…
Huge thanks to Ryan of V1 Engineering, the Generous Genius, for sharing his wonderful machine designs with the world. This is a remix set related to the amazing LowRider v4 DIY CNC . For orientation on what is meant by “front” of the…
A trolley I made for the unistrut that I hung in my garage to store spare bicycle wheels and tires. I used standard 608 bearings 8x22x7 and park tool 470 storage hooks…
Sturdy foldable gas canister stand for camping and backpacking. Compact and lightweight. Print in place design. For 90mm and 110mm diameter gas canisters. Version 2: larger stand diameter, better locking, more secure canister fit, higher…
Lots of people have designed containers for desiccant (silica gel). Lots of people have designed such containers to fit in the centre hole of a filament spool. This one is mine. Features Sized to fit in the 50mm centre hole of standard…
About the Film Canister Holder: This is a simple remix of the base Gridfinity template adjusted to fit very precisely most common film photography canisters. Sizes: The hole is 32mm to best fits film canisters of 31mm of diameter (most of…
UPDATE: Magnetic Version uploaded! for "rare earth magnets" 3mm thick and up to 9mm Diameter Monty Python Ministry of Silly Walks, Silhouettes for office cubicle window. Print Settings Printer: Mingda Rock 3 Rafts: No Supports: No…
I originally designed this canister to hold my Flexcut carving set. But I quite like this model actually and want to use it for a bunch of other things. It's kinda shaped like a chunky peanut butter jar… and will look like one too if you…
Da wir in unserer Markise meist ein Sonnensegel in die Kederleiste eingezogen haben benötigte ich ein paar Haken, die unsere Lichterkette aufnehmen können. Die Markise biete neben der Kederleiste ein weiteres Profil. Die Haken sind als…
High Power Rocketry e.Charge case This is a simple and quick to print recovery charge case in four sizes. This uses standard electronic matches that when seated in the case, prevent black powder leakage. They're designed for single use…
I wanted to make some scribe lines on parts that get scratched pretty easily, so I designed and printed this 'machinist square'. I keep this one on my desktop and the real deal in the workshop. :) Dimensions: 50mm x 75mm x 15mm Edit…
A hook to secure the Thule Omnistor storm strap set. It prevents the storm hook from slipping out of the locking point.
I printed the metal parts in Gun Metal Grey and the ooze was printed in a bright “toxic” green. you will want to use supports to support the middle part of the R, which will have to be glued into place independently.
3D Printed Machinist Jacks are better than no machinist jacks. This version is pocket size and can range from 35mm to 52mm with nice knurled rings. They are quick to print and quite strong being able to handle my 175lb weight as sliced.…
This is my take on a key for my bearvault cannister. This model has an easy attachment point to the canister for simpler removal (especially in the cold), a vertical wall for stability that is contoured to the curvature of the cannister,…
The parent system is neat, but it contained no way to slot tools like try or machinist squares and digital angle rulers on wall control panels. Additionally, I found some of the sidepiece flats and pins in the parent to have hooks that…
The model ( IN INCHES ) is designed for a full size unitsrut end. You should be able to smack it in place with your hand, but for bent struts, use a hammer/mallet and tap lightly on the edges. .3mm Draft is good enough and takes about 30…
This is a cool model that I found on Sketchfab by RISD Nature Lab. This model is actually quite easy to print. There are just a few adjustments you need to make before printing. Add a raft at 2 or 3 layers for the best bed adhesion (or…
So I remixed something else that was just a canister but it was not for anything it just had a neat design. If someone recognizes the design I'll gladly attribute to it, but it's so far from the original, I don't think it's that much of a…
Save some space and stack up those fuel canisters. Made for 90mm/3.5" diameter gas canisters with plastic caps.
Ein kleiner Nistkasten gedruckt aus 3 Teilen. Im Gehäuse werden 3 Schmelzgewinde angebracht um den Deckel anzuschrauben. Die Abdeckungen passen auf handelsübliche M5 Zylinderschrauben. Müssen eingeklebt werden. Habe das Gehäuse mit…
Canister holder with spacer for second canister For assembly you will need: Nut M6 4 pcs Washer Grover M6 4 pcs Screw M6x30 DIN 912 (ISO 4762) 2 pcs Screw M6x50 DIN 912 (ISO 4762) 2 pcs Nut M10 ISO 4032 4 pcs Washer Grover M10 2 pcs Screw…
Print four parts like pic below.
Ministry of Silly Walks clock. This is a remix of https://www.thingiverse.com/thing:43815 I cannot tag it as a remix as Thingiverse seems a little broken for remix searching. I took the clock face from 43815 - it's in two parts so you can…
This is a small container I've created as a clean wrapper for a little present. A wrapper with a little twist. Because of the clean design it might be a good starting point for your own decorations or modifications. Have fun to print and…
Female bard miniature playing violin in dancing pose. Designed to print without supports on an FDM printer. I used 0,2 nozzle and 0,8 mm layer height. If you want to support me and get access to my weekly posts, please visit:…
Left and right endcap for OMNISTOR 5500 motorhome awning. Developed in two parts - you have to glue it together.
Smal canister, malí kanystr o obsahu 10L. Velikost 47x35x10mm. Oválné díry jsou uzpůsobeny na šroub M3. Jedná se o velikost 1/10 reálného “expedičního” kanystru.
Verbesserter Fuss für Omnistor. Der Splint ist nicht brauchbar, nur hier zu Verständniszwecken. Anstatt den Plastiksplint zu verwenden, einfach einen Hering reinstecken.
Esta figura 3D ultradetallada representa al icónico payaso Pennywise en su versión clásica, perfecta para coleccionistas y fanáticos del terror. El modelo incluye: Base circular plana para exposición. Globos realistas en la mano derecha.…
A simple and silly clock! Main clock body is designed to house a 55mm clock mechanism. (The one I purchased the from Amazon https://www.amazon.ca/gp/product/B08JLXLJJH/ref=ppx_yo_dt_b_asin_image_o03_s00?ie=UTF8&psc=1 ) . While most of the…
Machinist Job Stone/Soul Stone from FFXIV re-submission due to being unsearchable. Category: Games
This is one of three projects designed to reuse most of a discarded PET bottle. The others may be found at the following links: TINY FUNNEL ADAPTERS GIFT BOX KIT CANISTER KIT DESCRIPTION This kit comprises a rim (strengthener) and lid to…
Interior diameter is 3.0 inches / 76.2 mm. Interior height is 2.0 inches / 50.80 mm. No supports are required. The model responds very well to scaling in your slicer if you want different sizes. The table below provides scaling factors…
Still in Beta, requires some testing to make sure everything works well. Requires m3x50 BHCS, heatset inserts, and 4 m2x12 screws. Modified Long's Mantis X Carriage with KlickyNG. Mini Sherpa Extruder. Bambu Hot End. 4010 Blower Fans.
Part 2 - Rods and Spacers. For Part 1, see: https://www.printables.com/model/328497 These are my improvements for the ingenuous OmniStand v1.36 by Baron Williams - the replacement stands and rods for the FlashForge Dreamer printer. Think…
The model can be scaled up to any size your printer is capable of. (It's currently in 1/24 scale)
![[unofficial] LowRider v4 DIY CNC - for use with Unistrut / Superstrut / metal strut - table extenders, rail clips, and rail placement jig v1.0](https://media.printables.com/media/prints/1178649/images/8868018_3e4f06c2-c883-4012-9e58-fbac3acf33a3_d3c9d2f1-d15d-488f-bb0a-152d6677cd7c/img_0275-with-labels-retouched.jpeg)
