Counting matching models…
This case is designed for Nixie clocks with top-view tubes, but can easily be modded to accommodate other displays and controls. It is inspired by the lovely midcentury design of the Italy-made IME KB6 calculator input/display unit. The…
Nixie_ldl_clock IN-12 description GitHub project repository: https://github.com/lorenzo-dl/NIXIE_LDL_CLOCK Nixie tubes are a vintage type of display that uses a glass tube filled with a low-pressure mixture of Neon and other gasses like…
Hi there! Body for clock made with gas discharge indicators IN-12 in retro style. Indicators were made in Soviet Union in the 70's. Body has six plastic parts and rear wall made of pressboard, to emphasize retro style. For attachment you…
Little Tool for the popular IN-14 Nixie Tubes. The Wires of the used Tubes are often bent and hard to align with a circular hole pattern on a PCB. The socket features conical holes to get the wires into perfect Position for Soldering to a…
Credit: Got the Idea from here : http://www.instructables.com/id/Lantern-Clock/?ALLSTEPS To assemble the Lanterns you'll need: 12 3x100 mm threaded rod (may be a bit to long but rather to long than to short) 3 3x20mm bolt 3 60x50x60…
This is my interpretation of a nixie clock in the style of a radio receiver from the fifties. The nixie clock itself is a electronics kit from elektor.de: https://www.elektormagazine.de/labs/150189-6-digit-nixie-clock The RGB backlight is…
IN-14 Nixie Clock Description This nixie clock uses six IN-14 vertical Russian tubes, driven by the Zirrfa pcb kit. To access the buttons a sharp object is needed. This is a design choice to keep the clock profile simple and to prevent…
I needed some kind of enclosure for a nixie clock (PCB and its gas lamps). Sometimes, one could easily get a 300V hit, which is not deadly due to super low power of the device, but still unpleasant. And although gas lamps have a nice warm…
I designed this for a custom board, so I have included the .step file for easier modification. Uses M3 threaded inserts to hold the circuit boards and some magnets to hold the backplate on. The front panel is glued. I have found that some…
Nixie Clock Case for the “Zirrfa Nixie Board"…
So recentley I was bitten by the Nixie Bug and startet playing around with them and building clocks, electronics and other things like a madman. Having now partialy recovered (after a sucsessfull Nixie tube clock build) I thought I could…
3D-printed case for the IN-14 Nixie Tube Clock kit from NixieDIY.com . Print Settings Printer Brand: Prusa Printer: Prusa Mk2 Rafts: No Supports: No Resolution: 0.15 Infill: 20% Filament: Hatchbox PLA any Notes: Any material does the…
I made this modell for universal nixie motherboard you can find it on ebay or aliexpress. I used original rft socets and m3 srews. you need to glue the socets holder on the housing and the legs to housing.
This is a nixie clock enclosure I designed for the pvelectronics nixie QTC clock. I used a thin polycarbonate sheet that I just cut with scissors for the front glass.
Ever since i found out about the nixie clock i couldn't get it out my head. I wanted one so badly but i couldn't find a nice a case to fit the electronics in and still get that vintage look without spending too much so one day i got the…
This is a case I designed for a nixie clock kit which I purchased on Ebay. There are a couple of modifications to the kit required. First, the display must be connected to the main pcb with wires instead of headers. Second, the real time…
*UPDATE 07/21/23: Added “Base” file for angled display I really enjoyed designing this project and got lost in it for hours much to my enjoyment. I built this IN-12 Nixie clock but it only came with 2 printed feet to hold the PCB, leaving…
Designed an enclosure for a nixie tube clock kit found on ebay by seller TCorp in Ukraine. This case is specifically designed for IN-12 tubes. The kit was bought without the tubes so the tubes were sourced separately. This is a work in…
So recentley I was bitten by the Nixie Bug and startet playing around with them and building clocks, electronics and other things like a madman. Having now partialy recovered (after a sucsessfull Nixie tube clock build) I thought I could…
Horloge de style Steampunk réalisée sur la base d'une horloge numérique de bureau à affichage LCD ( Horloge de bureau Nixie ). J'ai ajouté 4 leds avec des résistances de 10 K ohm pour marquer la séparation des heures, minutes et secondes.…
I managed to find myself with four perfectly good IN-12 Nixie Tubes. I also managed to find myself browsing a certain site full of the most curious wares, when I stumbled on this, a "IN-12 Glow Tube Clock Colorful 4 Digits LED Retro Clock…
I've bought a cheap DIY Nixie clock kit that includes front and back acrylic plates, but otherwise the electronics are exposed, so I wanted to hide it in some enclosure. I think in the end I'm going to make a case for it made of wood, but…
Simple case for a nixie clock. An Ali PCB that is designed for IN-14 tubes. Tried printing in both PLA and PETG; came out nicely with no additional work needed. No special settings for the printer, just some supports for the overhangs.…
A 3D printed socket for IN-1 Nixie tubes. The sockets can be configured with either a simple two-way flange with holes at the end (traditional style), or with wide slot flanges. As the glass part of IN-1 tubes is often rotated in its…
You will need 4 pieces of 6mm x 3mm magnets to put in the part. So it sticks itself and can be easily transformed in wall mount I will upload the wall mount option very soon!!
This is a case for a Nixie-Tube-Clock that I created. The Tubes can be bought e.g. on Ebay. The PCB board aswell or alternatively on Aliexpress. The case is supplied with a opening for the USB-cable. Additionally holes for the control of…
This is a simple but elegant case for the TubeHobby NCV2.1-14 Nixie Tube Clock. There are a couple of advantages of this case as compared to the one I made previously : It is easier/simpler to fit the clock into the case, due to a new…
Built from the ground up using inspiration for the face from: https://www.printables.com/model/68922-in-12-nixie-clock Built for zirrfa Electronic DIY kit in12 nixie Tube:…
you need to insert the socets first and solder the cables after some super glue the socet base on the housing and the legs for the housing. Afte you can put the electronic on theback cover insert the tubes the front panel and enjoy it:)…
Printable case for a nixie tube clock kit by nixiediy.com
3D files for my own Nixie clock. Printed in wood PLA and painted with wood stain.
So firstly your dimensions will likely differ quite a lot, thats why I include editable fusion file. I had to reprint a few times to get it right. Body cover was designed with text for buttons to take advanage of MMU. But there is a…
This is a nixie clock enclosure. Easy to print and looks nice.
Here is my nixie clock : 6x IN14 russian tubes 6x Neopixels Leds 2x HV5530 high Voltage drivers 1x 210V High Voltage step up power supply 1x 5V step down power supply 1x ESP32 microcontroller 1x radar sensor 1x light sensor 1x (option)…
A case for a Wemos nixieclock bought from https://www.nixieclock.biz/Store.html If tolerances are too tight; try and scale the main body. Print Settings Printer Brand: MK3 Printer: Prusa i3 Rafts: No Supports: No Resolution: 0.3 Infill:…
Print this with latest cura (with arachne engine), 0.5mm width, 0.2mm layer height and perfect bed leveling is required for colon to look good (the led windows are only one layer thick) The PCB can warm up so I suggest to print with PETG.…
Over on Tindie there's this cool Nixie Clock kit that I like so much, I've purchased two of them (granted I killed the first one and couldn't fix it, but... moving on). After I assembled the kit I determined the sufficient, but plain…
because europe is at war and my main tube suppliers are from Ukraine i made this Ukraine edition
This is box to house, protect, and display the wonderful LED-NIXIE-M clock by www.led-genial.de. It is a nixie-style clock implemented through etched plexiglass panels edge-lit by LEDs. The software running on the controller is…
Simple housing for nixie clock made from PCB kit from www.nixieclock.biz in combination with ZM1082T tubes
Project was inspired by this clock: https://www.printables.com/cs/model/69933-midcentury-nixie-digital-clock-case but it is completly my project. The case is prepared for Swiss Rodan CD-43 lamps with sockets. The lower part of the housing…
The project Giant Size LED Nixie Clock, especially making the 28 digits with its nearly 1000 LEDs requires patience and determination. However, the end result is stunning. The LEDs arranged in 1970s nixie look in a glass - old fashioned…
The 2013 (and later?) Fiat 500's have a docking port in the dash for a TomTom GPS unit. I have had my eye on this docking port for some time, with the idea of making my own something to dock in there. Well, the day has finally arrived. I…
Hi, Here is my latest creation, yet another clock ! This one is based on a IV18 VFD tube. You can find a lot of models on ebay. some documentation : https://web.jfet.org/inGrid/ It is powered by a simple USB charger or any laptop USB…
I got a Millclock IN-14 tube clock for Christmas and while I love the clock I don't love the case design. I created this case that slips over the existing case with no modifications needed. I printed this in walnut wood filament with…
This is a second desgn of my IV18 VFD clcok here : https://www.thingiverse.com/thing:3037333 This time have choosen the "most minimalistic" design. My goal was to get an almost floating clock : the tube just above the wooden base. A full…
A ESP32-based IN-12 Nixie clock, based on GreatScott's clock from some time ago. Both the Arduino sketches (for testing and for normal use) as well as the PCB gerber file are included in this repository . The basic functioning is…
Case for my two-band spectrum analyzer housing LM3914's and IN-9 Nixie tube replicas made from LEDs. LEDs are soldered to a finely cut, hand-etched PCB and put in a 15mm Plexiglass tube.
I loved the vintage TV enclosure, but I really think it was more designed for someone building a FunKlock for the first time and not taking an existing FunKlock and installing it into the case due to the placement of the power jack. I…
you can use any type of rounded tubes with diemsion 30mm. you need to have original socets or printed socets for the tubes. the socet holder neded to be glued for the housing. the kit:…
It is intended for use of IN-16 nixie tubes. And will need a custom PCB under the nixies to function… Have fun !
Digitronové hodiny (stavebnice) - náhradní přední a zadní kryt. Originální plexisklo za moc nestojí a rádo praská.
I made this stand to test my IN14 nixie tubes. I designed this object. Feel free to use it however you want. Print instructions For the first 5mm add some extra perimeters for strength. I use hot glue to attach the nixie tubes to the stand.
3D files for yet another clock I've made as a gift. Uses 4x LC-531 and 2x IN-16 Nixie tubes. Everything made by me.
Ezt a dobozt a diynixie-nek készítettem 12 órás készletben. A prototípuson hátul és elöl lézervágást használtam, de készítettem egy 3D modellt a hátulsó és az elülső oldalra, hogy könnyen kinyomtathasd. A lábakat a házhoz kell ragasztani.
I had a couple of A-101 Dekatrons that I wanted to use for a project, and set out trying to source some suitable PL30-2P sockets for them. Unfortunately it seems that these sockets have become unobtainium, as I've been unable to find…
Print this with latest cura (with arachne engine), 0.5mm width, 0.2mm layer height and perfect bed leveling to have great top surface. You need 30x 5mm M2 countersunk bolts (recommend hex or torx for looks!) + 30x 3mm brass inserts. Long…
3D files for a LC-531 Nixie based retro clock I've made.
This is a storage tray designed to hold 12 IN-12 Nixie Tubes. Each compartment is 30.5mm x 20.5mm x 20mm in height. It can be printed without support. This object main web page is: http://www.ctheroux.com/in-12b-nixie-tube-storage-tray/ .…
The PCB should be screwed into the case using internal threads (M3) that can be melted into the 3D print for screws
General information At the end of 2024, I set up version 11 of Helmut Weigl's RoeTest . In the process, I created some 3D designs that I am making available to the community in this collection . You can read more information about my…
Update 05/24: I changed the .stl file so it shows the individual pieces in their correct orientation for printing. You will still want to print the seal piece in a different filament though… I build a case for a nixie clock based on Claus…
its for rft z568m tube ore simular. Print with pla 100%infill. I used old cumputer dsub connector pins and put it with soldering iron.
Based on a modified version of http://www.thingiverse.com/Amplivibe 's Eurorack panel OpenSCAD program. This is a work in progress: still working on the the best way of applying lettering to the faceplate. There are several STL files:…
for Kees Soeters wifi nixie clock using 6 z573m rft tube
This is a 15 mm in height stand for a 4 Digits Nixie Tube Clock. This clock is available on AliExpress. The base of the clock is 40 mm x 111 mm. Support material is not needed. An infill of 20% is recommended. This object main web page…
Nixie Clock body for IN4 lamps, 6 bit. The following parts are needed: 1)6x IN-4 Lamps 2) https://aliexpress.ru/item/1005006038665199.html ( 6Bit Nixie tube Clock Motherboard controller Board W Remote Control Universal in12 in14 in18 IN8…
This is the base for the IN4 and IN7 nixies that was used for the tictactoe DIY kit from Lasermad. The supplied bases were not easy to fit the nixies into, so I designed them to be slightly taller so they can sit inside the base without…
https://www.youtube.com/shorts/AV2I88nhYOQ PCB: https://www.pcbway.com/project/shareproject/Raspberry_PICO_Nixie_Clock_Lcd_f3d1c4a8.html Please follow my YouTube channel. Still a newbie to make a YouTube channel. Just press Subscribe my…
Simple base for nixie clock bought from ebay/aliexpress. Print Settings Rafts: No Supports: No Resolution: 200 Infill: 20 Filament: PolyMaker PLA Category: Art Tools
Case for an IN4 single digit nixie clock from www.kosbo.com ( https://www.kosbo.com/clocks/in-4-1digits-nixie-clock.html ). Use a blob of blu-tack or similar to hold flat on a desk. Print Settings Printer Brand: Wanhao Printer: Wanhao…
Nothing crazy just an enclosure for random aliexpress nixie clock in12 for product like that hope you enjoy it.
Shelf for Nixie Clock Noyce Joyce Shop list: 2x wood screw M4x35 2x dowel
3D Files for my IN-9/IN-13 Nixie ThermoVU. ESP32 Controlled.
This full-scale model of a popular printed circuit board for a Nixie clock. You can purchase such a board on AliExpress. It's compatible with almost any type of nixie tubes, but obviously made for direct mounting upright tubes (like IN14)…
This is an enhanced 3d model of the "oldschool" stylish clock for Alex Gyvers project enthusiasts. DISCLAIMER: I m not related to "Gyver s" projects or website in any way. Link below is for enthusiasts, who meet this page by random…
Made this to cover up the buttons on this clock from amazon. https://www.amazon.com/dp/B0B5LLM9C7?ref=ppx_yo2ov_dt_b_fed_asin_title&th=1 You'll need to rotate to fit on bed of p1p.
Description Inspired by the butifull work of d4Rk I made a remix of his Nixie Clock: You can find the Digital Nixie Clock at: https://www.aliexpress.com/item/1005008155604965.html You will need : Copper paint, Rustoleum Soft Iron spray…
Sierstukje voor de nixieklokbehuizing Category: Electronics
I recently received and assembled a Nixie Clock Kit (not my kit) for my birthday. However, there's a 180V no-touch area. With 2 kids, I wanted to build in a little extra safety to keep fingers from wandering into the danger zone. It also…
FALLOUT 4 Faux Nixie Tube Clock Case Convert a H401 Retro Nixie Tube Digital Clock to display any user graphics without need of the original phone app. The clock H401 is available on Ali-express around $40 - $70 US New firmware is easy to…
You'll need some M3x12 bolts, washers (better metal than 3Dprinted) and M3 nuts.
As pretty as the wood cases are for the nixie tube clocks at nixieshop.com , I knew I wanted one with some tilt, so I can see it at my desk without the numbers being obscured by the grids in the tubes. I also wanted it to be as compact as…
Custom Nixie Clock Enclosure This case was designed specifically for a custom-built Nixie clock and tailored to fit my own PCB layout. It offers precise cutouts and mounting points to support the components securely, with a clean and…
This is a remix, see original for detailed instructions. I have made the case with PLA, which is the reason I made the ventilation openings. I recommend to made the front panel with PETG. Buttons and the front panel are the same as the…
I made this as a small stand for a landscape Nixie clock. I wanted something that looked more like a piece of late-60s/early-70s plastic furniture than a plain rectangular bracket, so the shape is loosely inspired by the Massonnet Tam-Tam…
Spacer / Socket for RFT Nixie Tubes Z5700M, Z570M, Z5730M, Z573M, Z5740M, Z574M, used in my Nixie Clock project: https://www.maltepoeggel.de/?site=nixieclock-z5700m
Description Inspired by the butifull work of d4Rk I made a remix of his Nixie Clock: You can find the Digital Nixie Clock at: https://www.aliexpress.com/item/1005008155604965.html You will need : Copper paint, Rustoleum Soft Iron spray…
You'll need some M3x12 bolts, washers (better metal than 3Dprinted) and M3 nuts.
This is an enhanced 3d model of the "oldschool" stylish clock for Alex Gyvers project enthusiasts. DISCLAIMER: I m not related to "Gyver s" projects or website in any way. Link below is for enthusiasts, who meet this page by random…
This is box to house, protect, and display the wonderful LED-NIXIE-M clock by www.led-genial.de. It is a nixie-style clock implemented through etched plexiglass panels edge-lit by LEDs. The software running on the controller is…
Update 05/24: I changed the .stl file so it shows the individual pieces in their correct orientation for printing. You will still want to print the seal piece in a different filament though… I build a case for a nixie clock based on Claus…
💎 Features Includes files for popular E26/27 pendant light fixtures: threaded and smooth-walled fixtures. The single wall lamp shade utilizes “spiral vase” mode to optimize print times. The shade easily snaps into place and can be twisted…
3D Files for a new Nixie clock I've made with four IN-14 and two IN-16 tubes.
