Counting matching models…
IMPORTANT Please download the "BentoBoxV2 2023XXXX.3mf" project 3mf file and “BentoBox20 User Guide 2023XXXX.pdf” Descriptions, BOM and build instructions are in there. I try my level best to make it as comprehensive as possible. Use only…
This large ornament or tabletop decoration (~5" diameter) uses a standard tealight LED candle (38mm diameter) to light it from within. If you have a tealight of a different size, I would scale the model to adjust to it's diameter. Print…
Would you like to make extra income selling these planters (and future new models)? Please feel free to check the models with the included commercial license here:…
The goal was to create a buckle design that is durable and of course adapted to 3d printing. It often happens that the buckle (e.g. on a backpack) breaks when you step on it. I believe that these 3d printed buckles will last, since they…
The Compliant Mechanisms Research Lab has worked with Mark Rober and his team to create the world's smallest functional Nerf blaster. Watch his video here ! EDIT 10/16/2023: The ¼-scale files have been updated to a version that latches…
Turn your phone into part of the machine. The Mobile Exo-Suit is a print-in-place mechanical phone stand with an articulated body, interchangeable armor, and support for phones from approximately 70 to 95 mm wide. Choose between a…
An interactive robot that anyone can make! Otto walks, dances, makes sounds, avoids obstacles, you can code on your own and even customize, it is completely open source, Arduino compatible and 3D printable. Features 💻 Programmable with…
Support the Creator If you'd like to sell this model as part of your business, please consider supporting my work by purchasing a licensed version here: Licensed Model on Patreon Latest Update – 4/1/25 Thanks to the awesome feedback from…
This collection will be updated with new models from time to time! Ideas and suggestions on sizes and features are welcome! For full collection and editable STEP files, please purchase the full pack from here: Full Pack Download Modular…
Dimensions (LxWxH) 110 x 65 x 19 mm (100% scale) Basic information Trilobites have been extinct for quite a while now, so you most likely won't get the chance to hold one in your hand any time soon. But here's a great alternative for all…
Variation of other multimeter probes with focus on removing support requirements and easy slotting of probes. Two versions, for two most common diameter probes. Print in PETG for maximum usability.
Simple Honeycomb Mobile Stand Consists of two parts that you can optionally print in different colors. The stand offers two settings – depending on how you insert the parts together, you can adjust the angle of the stand. Charge your…
***Update: 15.07.2024 - Add STL data*** Hello print enthusiasts, here you can find the first version of my robot hand. The hand is assembled from several parts: When assembled, the hand can still move freely. The hand holds its position…
Generate your own nuts, bolts, washers and threaded rod by simply typing the required parameters into OpenSCAD. Great for replacing metal equivalents in many applications. Includes options to generate nuts, bolts, washers and WingNuts for…
BoxBot B-01 is the first in a series of print-in-place robot figurines that fold up into cubes. The model features 10 3D printed hinges that operate 4 moveable legs and 2 cannons that fold out from the robot's main body. The print…
STYR-01 is a compact and charming rolling robot that fits in the palm of your hand. It features a passive stabilization system using an internal counterweight. Thanks to this mechanism, its head always remains upright while rolling,…
This fast-printing phone stand has been specifically designed to print in ‘vase mode’ (and 0.8mm line width) to allow for very fast printing and low filament usage, whilst maximising strength and stability. Key features: Very fast to…
A Detailed Parts List can be found in the description of the YouTube Video below. Detailed Assembly Tutorial: https://youtu.be/AIsVlgopqJc Showcase YouTube Video: https://youtu.be/5toNqaGsGYs Hope you can have some fun with this arm!…
Use this test tower to test for Z banding/wobble. This print aims to be simple, as quick to print as possible and and use minimal filament. Recommended print settings: 0% infill 0 top layers Z seam at rear If this model is too tall…
While the world seems to talk about eddy current based sensor probes nowadays, I still like the little PCB Klicky 🥰. So building my 2.4 I just optimized what is out there to dock the probe securely in place. Support me : Please leave a…
JERRARI3D.com Ryobi Power Tool Holder This holder is designed to secure the majority of hand held power tools in Ryobi's lineup. It can be mounted under a cabinet or workbench as well as vertically screwed into a wall. NEW - GEN2 RYOBI…
If you'd like to sell my model for your own business, please consider supporting me and acquiring a licensed version of the model here: Licensed Model on Patreon If you like this model, please consider printing the full sized semirobot…
Edit: 23. 2. 2026: I published an updated version here . It's better, so you should definitely download Gertrude instead. Edit: 23. 7. 2026: The updated version is now capable of carrying a dino rider. Try it out! This is my second flexi…
UPDATE Sep 24 2023 Before you download and print this, I made a new version with VENT Holes, check it out > DK Riser And another version of a low profile riser >> DK Riser Low Profile A Remix of Daniel's Bambu Labs Carbon X1 Top Glass…
The multi-material Prusa MMU3 test objects are useful to quickly test the reliability of the material changes during printing. These simple objects can be printed using different materials and colors, allowing users to test how well the…
Ryobi Power Tool Battery Holder This holder is designed to hold Ryobi batteries while looking sharp when empty. It's beefed up structure holds the battery at a 45 degree angle, allowing the battery to easily slide into place to become one…
Anycubic x McGybeer A collaboration that finally brings the Articulated Cobra to life! Includes 2 versions of a Pencil Holder, with and without texture. The Cobra can be rolled both upwards and downwards! Cobra and Pencil Holder are able…
Lobster! Print in place, with no supports needed. Work in progress, feedback appreciated :) March 5, 2024: version 5 is complete! There are two different editions. V5-A has much freer leg joints, so that it can be handled more roughly and…
This highly detailed 3D printed cobra captivates with its segmented body that can twist, coil, and strike hypnotic poses. Each articulated section mirrors the scaly texture of the real venomous snake, bringing lifelike movement to this…
This is a clip-on cover for the cable connector that goes to the bed of the Kobra 2 Pro . It should also work on the original Kobra 2 and the Kobra 2 Neo . The cover is meant to act as a bed aligner. It is also easy to put on and remove…
To redirect the filament waste downwards The waste diverter should be printed from ABS, ASA or HIPS otherwise the hot filament waste can get stuck in the diverter -------------------------------- Der Abfall Umlenker sollte aus ABS, ASA…
This is one of the sample objects bundled with the Original Prusa SL1 3D printer designed to test whether your printer works correctly. Model by Michal Fanta, used with permission
BEFORE STARTING THE IMPLEMENTATION OF THE PROJECT, READ CAREFULLY THE ENTIRE DESCRIPTION AND VIEW THE PHOTO GALLERY !!! This is a Remix “Filament Guide Sled and Filament Guide” for an amazing project " Filament Spool Switcher & Winder "…
Tiny bot with print-in-place moving limbs!
Might be slightly over-engineered, but I always keep a few different sizes on my key-chain. That way I'm always ready, when a zipper pull on or around me breaks. Saved me and my friends a bunch of times already. Print recommendations:…
A truly extraordinary decorative object. A moon with a small bowl attached for flowers and decorations. Standard size: 230x230x90mm. Easily scalable smaller or larger if required. A truly extraordinary decorative object. A moon with a…
My dimmer knob kept breaking so I made one myself along with the wall plate. Modeled a couple other plates as well and just kept going! The size of these covers are modeled to be midway size. Many to choose from. If there is something…
As Ender 3 v3 SE/KE has a rather unstable structure, the additional weight placed on top makes it even worst. I designed a handle to transfer the filament to the bottom of the printer. As a result, the prints are noticeably higher…
Hello print friends, as some people have requested, you will find now the “ right hand version ” of my robot hand. The hand is assembled from several parts: When assembled, the hand can still move freely. The hand holds its position…
If you're looking for my Bambu print profiles, they're at MW . Voronoi Mobile Phone Stand V3 (No Supports!) A lightweight, stylish phone stand built around a Voronoi lattice pattern that looks great on a desk and prints easily without…
Note: A larger version of this drone, able to fit a 20x20mm stack is available: The Goblin FPV Drone I worked hard on this little guy. Poured love into every edge and crevice. Spared no mechanical consideration. And what a beautiful…
Sample model for Original Prusa MK4. Designed to be printed entirely without supports. Featured in the Prusa Academy postprocessing course . Author: Prusa Research (Vlado Turek)
The Articulated Anycubic Kobra. This was a free file given to the general public at the premiere release of Anycubics' new Resin and FDM Printers recently (two of them being the Kobra and the Kobra Max). I obtained this file from the…
The absolute best modification you can make on your Kobra 2 class printer. And it's FREE! Better cooling with true 360 coverage Quieter than stock Unobstructed nozzle visibility Fast (tooless) removal to fix clogs/replace nozzles Uses…
The Spine chain was made popular by @rogerquin_304616 when he designed it for the SOVOL SV06 . This is my version for the Anycubic Kobra 2 Series printers. This is my original work and drawings all inspiration for this design goes to…
A swim through structure for your fish! Includes: SpongeBob's Pineapple House Squidward's Easter Island Head House Patrick's Rock House Baseplate Instructions: Print the houses and the optional Baseplate glue the houses on the baseplate…
The contour data for the largest 60 land masses and 6 of the largest lakes were plotted on two spheres, 100mm and 102mm radius.. Arcs were made between contour points to generate closed paths. Lofts were then made between the two spheres.…
Using a flexure spring and an over-center mechanism to create the classic toggle switch in an interesting way. Shouldn't need any lubrication, but like all mechanical prints, it can benefit from a little oil, wax, or soap in the joints,…
Print in Place - Print & Play Is a Mechanic Hand but it moves like a real hand. R2- This is a review of my previous design. I Changed the the finger joints (add hinges) and other smaller improvements. R3- Created limits so each finger…
Robux Coin 2 sideded remix
3D representation of what Robux would look like. This was requested by one of my friends for their kid's birthday. I found that printing many of these at a time helped the silk filament shine. Print Directions Layer Height: 0.2mm Infill:…
This is to help you get that perfect first layer and determine where you need to make adjustments on your 220x220 bed. The Model is pre-offset in slicer will print perfectly aligned with 220x220 build plate. Run Brim test first to dial in…
Quick release adapter for easy hot end servicing. Works with stock fan and duct, but works best with this custom duct: https://www.printables.com/model/724096-kobra-2-fan-cartridge You might need to scale slightly smaller or larger. You…
After using the zip ties for a while to level the Pinda Probe I started to get worried about running out of them so I designed this. This replaces the zip tie that is used to level the probe. It is a very quick print and is well worth…
***Updated: 06/15/2023 Added step model from ETP robot, for simple changes and for remixes of the model.*** Here you can find the first version of the " ETP-Robot , an easy to print, free moving action figure. The model is designed to be…
There are plenty of drain snake STLs out there, but this one has bite. The design allows larger teeth while keeping the snake small enough to slip into drains. Prints in less than 30 minutes and works well at 0.20mm layer height. Fun…
My little niece needed a keychain and is a big fan of the game Roblox. So I found the Roblox logo online, fired up Fusion 360 and designed a keychain. Both colors are PLA and are printed with the 0,4mm Revo nozzle. The colors used are: -…
Hi if you really like this model you can remix this model or print it!
Build your own robot like a Ninja 🐱👤 This is the first emotional modular EdTech Arduino opensource robot that can walks & rolls! Features 👣 Walk & dance 🚗 Transforms quickly into a wheeled robot 👩💻 Simple Programming with Otto Blockly or…
Building a biped robot that moves around like a person is a significant challenge, but you don’t need much experience to build a robot like Otto. Humanoid is also sturdier than the previous versions and includes various upgrade it’s code…
Many parts of the Mini benchdrill are designed for PLA filament. A few parts are designed for heat-resistant filaments (Petg, ABS, ASA). Assembly steps and details are shown in the video. This design has an automatic start-stop feature…
A whole lot of Sonic the Hedgehog characters. For characters like Tails who float above their platform plate, there’s a version with a connection. Includes: Sonic Tails Knuckles Shadow Silver Rouge Espio Charmy Vector Classic Sonic Blaze…
I originally designed a replacement 3D printed knob for a Smeg oven after struggling to find a replacement. I've since added a total of 7 customisable Knob designs and 5 customisable Inserts that can be mixed and matched to create the…
Remixed to fill out the holes for faster printing. The holder is reusing the two existing screws, so no extra hardware is needed! 3MF is for AnycubicSlicerNext, 0,24mm, Tree Support included
UPDATE: Please print the Updated stl file since some slicers have issues printing the top circle. :)
Easy Install version Snap-On set of bed sheet aligners. Compatible with factory bracket, Also Strain Relief & Cable Chain Anycubic Cable Drag Chain Anycubic Strain Relief PETG Print with 15% to 20% infill. Left Mount needs support:…
Kenji is your new desk companion, a keychain, a souvenir and an useful test print. If your Kenji came out perfect, ready to see what your printer can really do? Print-in-place is just the beginning. Fully articulated assemblies are where…
Want to progress your rock climbing prowess while completing simple household tasks? Transform your morning routine into a high octane test of endurance and will with a quick swap of your cabinet hardware. These cabinet knobs will add a…
These cabinet knobs are pleasant to the touch thanks to spiral narrow ribs all around. There are five basic shapes (3 bigger and 2 smaller) in the back-mount version (A1, B1, C1, D1, E1) and same in the front-mount (A2, B2, C2, D2, E2)…
Commercial license for all my models -→ https://www.patreon.com/MeasureOnce New assemblable version available on Makerworld https://makerworld.com/en/models/2624847-infinite-jacobs-ladder-toy#profileId-2897666 DO NOT SCALE. There is 0.4mm…
Transformable Truck Robot. Ptint in place. Based on a Transformable movie character. Printed on PLA, .2mm layer height, .4 mm nozzle, 10% rectilinear infill, 4 top and 3 bottom layers. Use a brim if you have layer adhesion issues. No…
This classic holiday 3D model can be used as a large ornament for your Christmas tree or as a tabletop decoration. The charming glowing Christmas tree in the town square is surrounded by shops. This updated design prints better and has an…
If you like my work and want to support me bringing you new content please consider supporting me on Patreon https://www.patreon.com/FotisMint Pre-Supported .stl and .lys files for resin included by Charro Zuck support services.
I've remixed this Doodlebob Pen/Pencil Holder from https://www.thingiverse.com/thing:4151595. With the previous iteration, the eyes, nose, and tie were solid which meant if you wanted it to look screen accurate you would have had to draw…
Introducing the All-New Robak 2: The Ultimate RC Car for Makers. The second generation features an optimized suspension, providing increased off-road clearance. Many structural components have been beefed up to endure more than just mild…
Looking for the ornament version? Check that out here! Create your own snow globe by picking which panes to print and slotting them into the base! The base can support up to 3 panes, and there are 9 options (+1 blank pane) to choose from.…
" Anycubic Key " 2 Tools in One Extruder Tension disengage tool & Proximity Sensor height tool. Disengage tool allows you to disengage extruder tensioner. Gives you the ability when you load your filament all the way without having to…
FOR THE MOST UP-TO-DATE ASSEMBLY MANUAL AND STL FILES GO TO GITHUB: Github: https://github.com/PCrnjak/PAROL6-Desktop-robot-arm PAROL6 is 6 axes desktop robotic arm. It is a robotic arm whose design approach is driven by real needs from a…
Fitment Note: I only have the Ryobi batteries shown in my photos. Using calipers, I was able to precisely design for those versions, which you'll find have excellent fitment. I'm actively adding new version, however I'm basing them on…
Calamar de 9g - Squid - Petit jouet à tentacules mobiles - seulement 9g
It seems most printer knobs are either good at precision/comfort, or they are good at speedy rotation, not both. This knob upgrade truly has the “Best of Both Worlds”, precision using an aesthetically pleasing, traditional “knurled knob”…
This update is based on Gavitka's remix of the updated original Modular Mounting System . This is a remix of the clamp of the Modular Mounting System . I really like the clamp but I wanted to be able to mount it on a tripod. So I add a…
Johnny 5 will need to be printed with all the listed parts with the following settings below. Stock settings the figurine is about 6" in height. I recommend scaling to 150% for ease of removing supports and better detail on the model. PLA…
This little cobra has got his eyes on you! Glass eyes! :) 3mf file provided. Holes for eyes should appear in print preview after slicing. I didn't use a brim for this one. That would have been a mess to clean up afterwards! I did use…
This model uses 22 links, 22 covers, 1 end, and 1 start. I printed mine from PLA. Some supports are needed on the start and end. This chain clips into the aluminum extrusion under the printer just like the existing wire managers. Thread…
This is to help you get that perfect first layer and determine where you need to make adjustments on your 430x430 bed. This will work with any 3D Printer. Just scale to size of your printer. The pattern was modeled after bed screws on…
Since I could not find the ideal temp tower that meets my expectations, I designed my own. Features: - Uses little material because it is not too big - Different overhangs, 45° and a curved one - A thin wall at the overhang to test the…
Use with this runout sensor relocator: https://www.printables.com/model/701416-kobra-2-runout/files The Minion top spool holder for the Anycubic Kobra Max, 2Max, Plus and 2Plus. Works without hardware but recommended to use with M5…
This V2 version includes 6 fully functional configurations that are ready to be imported into Orca without any hassle. These include the printer settings, 4 filament settings and the process settings. I've addressed the issue where some…
This is a remix from Taylor Herrin . For more info how it is created see at the original model. The sculpture were so nice but I wasn't able to print it due to net errors. So I repaired it with Blender. In addition for faster processing…
Want to access even more models not found here in Prusa Printers? Interested in supporting my efforts making free models for the world to enjoy? Check out my patreon page here: https://www.patreon.com/mz4250 Patrons have access to all my…
Quad was inspired was inspired by #OttoDIY hat we all know ;) and MiniKame is a little quadruped robot based on an ESP8266 WiFi module. It has 8 servos (two per leg) and a small LiPo battery. Features 👩💻 Simple Programming with Otto…
Update 01/07/24 (07/01/24 for the rest of the world): “Wrench” model fixed to have looser tolerances so that there isn't any issues fitting over the knobs. K1 Max SCREWS_TILT_CALCULATE config added, screw locations courtesy of…
Print settings : 20% infill 3 walls
Clamping Knobs for metric screws and nuts. Sizes: M4, M5, M6 and M8 Just press the screws or nuts in - rescale in your slicer if they need a different fitting. The provided gcode includes all sizes. Happy printing! Print instructions…
Print with the flat side down, as shown in the model. This model works for Kobra 2, Neo, and Pro. I have updated the photos to include the proper way to install the holder. This way the spool does not come into contact with the printer in…
Locking bed leveling knob for the ender 3 s1/s1 pro. This design has snap features that keep the knob in place during/in between prints; so no more vibrating out of position or accidentally nudging the knob. The snap features also give…
Universal Cordless Impact Driver/Drill Holder A universal cordless Impact Driver/Drill Holder meant to organize your workbench as well as make it more ergonomic and easier to use. Front extrusion allows for it do double as a bottle…
Hi everyone, since official profiles for the Anycubic Kobra 2 Pro are not available for OrcaSlicer, I created one based on the official profiles that Anycubic made for PrusaSlicer with a couple of improvements such as easier to remove…
This simple tool helps find the proper offset for your Cartographer probe in relation to your nozzle tip. Having a 2.6-3mm Z offset is critical for reliable operation of Cartographer Touch (nozzle probling). The Y offset ruler is just a…
