3,672 models
Summary Dinky little toy blaster. it shoots about 30 feet, is pretty small and is made out of purely printed plastic and two rubber bands (One for the trigger and one for the magazine). It requires no fasteners, or glue, and just uses…
Print approx. €3.74–€4.57 excl. taxPreliminary estimate for one variant
Whether you've got flexible filament or not, these cases make for an easy print and a sweet looking phone. I designed these cases to print without support, so they turn out very clean. Both versions also provide a buffer for the screen…
Print approx. €1.67–€2.05 excl. taxPreliminary estimate for one variant
These are vise soft jaws designed 5 inch vise There are 4 recesses in the back for 8x3mm magnets. You could use it without magnets or just the 2 on the front face but 4 holds it really nicely to the vise. I used C.A. glue to hold them in…
Print approx. €6.32–€7.73 excl. taxPreliminary estimate for one variant
I've created a compensator for airsoft pistols inspired by some real designs. On an airsoft pistol, it serves purely as a decoration. Pictured on my WE G19. It's modeled with the standard 14mm twist and works best with a short adaptor…
Print approx. €0.98–€1.19 excl. taxPreliminary estimate for one variant
Hello, this is a fully functioning soft robotic gripper. You can use it on its own or print the exoskeleton around it. You can use the exoskeleton to mount it to a robot. It has the dimensions of approx. 200 mm in diameter and 17 mm in…
Print approx. €0.64–€0.79 excl. taxPreliminary estimate for one variant
I needed a bigger vise on my desk. Couldn't find one so I made this. printed in PET-G except for the pads (TPU). The vise and clamp are separate files as they are quite large. No support was needed for any parts. The jaw is designed to be…
Print approx. €8.54–€10.44 excl. taxPreliminary estimate for PETGSource material: PET
A soft edition of Tvorim3D design . There are a couple of clothing items that are delicate, and when used with regular pegs they can wrinkle, for those items, a soft peg is ideal. Printing The two parts can be printed in different…
Print approx. €0.08–€0.10 excl. taxPreliminary estimate for PETGSource material: PET
Melting Soft Serve Cone.
Print approx. €5.04–€6.16 excl. taxPreliminary estimate for one variant
I couldn't find the full train set on Printables.com, so I thought I would upload it in case anyone wanted the full thing, but didn't want to use 3D Builder . Photo is taken from the above link, I am still printing my set.
Print approx. €0.58–€0.71 excl. taxPreliminary estimate for one variant
I designed this funnel to help me reload my airsoft m4 mags. I recommend printing this in vasemode because it eliminates the ugly seams and is fast. Print this with any layer height you want, it doesn't really matter but i recommend…
Print approx. €0.31–€0.38 excl. taxPreliminary estimate for PETGSource material: PET
The gcode fits for HEUER FRONT 140 with replaceable jaws. With the FreeCAD file (.FCStd) you can easy customize the protective jaws for many other vices. In particular, round or oval workpieces can be securely clamped and worked.
Print approx. €4.99–€6.10 excl. taxPreliminary estimate for one variant
I need a simple, small target to set up for the uhltimate disc shooter. It consists of two parts and can be easily assembled. It simply fits together securely, no glue is needed. The two colors can be created with a simple filament change…
Print approx. €0.24–€0.30 excl. taxPreliminary estimate for PETGSource material: PET
Softair bottles arrives usually in carton boxes, once a few have gone the remaining ones wander around and they are under pressure! this canister keeps them in place, full capacity is 13 but, because I carry also maintenance oil bottles,…
Print approx. €3.17–€3.88 excl. taxPreliminary estimate for PETGSource material: PET
I created this because I know that this is a part that I will need in the future for my airsoft attachments. Print it with 0.2mm layer height, 10mm brim and supports enabled. Print this from the side that is touching the gun when attached…
Print approx. €0.62–€0.75 excl. taxPreliminary estimate for one variant
The walls are 1.35mm thick and bottom side is more rectangular for more stiffness.
Print approx. €0.24–€0.29 excl. taxPreliminary estimate for one variant
An all-in-one cable organizer for the Microsoft Surface power supply [3.54 x 1.97 x 0.98 in (90 x 50 x 25 mm)]. This original design offers the following features: two-pieces - print without supports and locks the power supply in place…
Print approx. €8.10–€9.90 excl. taxPreliminary estimate for PETGSource material: PET
I designed this dock to use the Microsoft Surface Pro 9 as a second display. The plug of the Microsoft Dock 1. Generation fits inside the dock, so that the Surface will be charged and connected to the display
Print approx. €9.36–€11.44 excl. taxPreliminary estimate for PETGSource material: PET
Replacement Keyboard Foot for Microsoft Natural Ergonomic 4000 Keyboard ( KU - 0462) . I had an old computer which I refurbished to donate. Used my printer to replace the broken feet of the keyboard with a designed new one, because I…
Print approx. €0.15–€0.18 excl. taxPreliminary estimate for one variant
A Privacy Shield/Cap/Cover for Microsoft LifeCam Studio. I used Prusament Galaxy Black PLA and it fits perfect on the Webcam. Additional Parts 2x M2.5 x 5mm Button Head Screws Links The links to AliExpress are advertising links. I would…
Print approx. €0.41–€0.50 excl. taxPreliminary estimate for one variant
DE: Einfaches Ersatzteil für ältere Blanco Select Müllsysteme mit Soft-Close Funktion. Die Stützstrukturen an den Ecken sind in diesem Fall sinnvoll um ein besser Passform zu ermöglichen. Als Material empfehle ich PETG um vorzeitigem…
Print approx. €0.48–€0.59 excl. taxPreliminary estimate for PETGSource material: PET
Mounting bracket for Microsoft LifeCam HD 3000. Ideal for mounting camera under the top IKEA lack desk. For assembly one M2 x 20 Screw and one M2 Nut is needed. Print instructions Bottom part can be printed without support. Top Part was…
Print approx. €1.04–€1.27 excl. taxPreliminary estimate for one variant
Soft Pretzel
Print approx. €3.95–€4.83 excl. taxPreliminary estimate for one variant
I recently read about a kirigami-inspired soft robotic gripper developed at North Carolina State University, and I wanted to create an FDM 3D-printable version to play with. The full article about how it works was published in Nature:…
Print approx. €0.21–€0.26 excl. taxPreliminary estimate for PETGSource material: PET
I created this because I know that this is a part that I will need in the future for my airsoft attachments. Print it with 0.2mm layer height, 10mm brim and supports enabled. Print this from the side that is touching the gun when printed…
Print approx. €1.02–€1.25 excl. taxPreliminary estimate for one variant
3 slots CO2 bottles container for safe storage in backpack or side bag. Caution: before the 1st usage use abundant WD40 on treads to ease the coupling. Following the first go no more treatment is required.
Print approx. €5.07–€6.19 excl. taxPreliminary estimate for PETGSource material: PET
Feeling nostalgic about Microsoft Office from early 2000s? Download and print this keychains for you or give to your coworker, friends and family! Info: Microsoft Office 2000 (version 9.0) is a release of Microsoft Office, an office suite…
Print approx. €0.20–€0.24 excl. taxPreliminary estimate for one variant
Why I wanted a softer grip for the thumbwheel, so I split the model in two: a core and a grip. These can be printed seperately in different materials. I chose TPU for the grip, and PETG for the core. Printing & Assembly The print settings…
Print approx. €0.92–€1.12 excl. taxPreliminary estimate for PETGSource material: PET
As requested by a maker, I posted here the remix of the Edge Softening Sander from stzoran1 that I adapted to different edge sizes 1mm 2mm 3mm The plate (Bloquage) remains the same for all the sizes. Just the Tool (Calle) is different. So…
Print approx. €0.17–€0.21 excl. taxPreliminary estimate for one variant
Designed this in FreeCAD to fit Godox 60×60 foldable soft box that comes with an S-type bracket onto my Godox SL100D videolight. The FreeCAD (v0.16) source file is included. I've explained the whole process in this video:…
Print approx. €3.46–€4.23 excl. taxPreliminary estimate for one variant
I created these soft jaws for my vice with magnets. You will need 4 20x10x2mm magnets which you insert during printing with a pause. Width of the jaws is 120mm.…
Print approx. €3.16–€3.87 excl. taxPreliminary estimate for one variant
Designed for a college dorm room lofted bed, this organizer tray is meant to attach to the safety rail. It is provided as multiple components for easy printing (and colour coordinating). Several different sizes are provided for the…
Print approx. €9.63–€11.77 excl. taxPreliminary estimate for one variant
A set of Customizable Mock Suppressors for your KWA M11A1. I also threw a smaller “one piece suppressor” in. Combine them however you want. They fit a typical AceTech Tracer Unit. Supports are a little more difficult for this model. MS -…
Print approx. €5.46–€6.67 excl. taxPreliminary estimate for PETGSource material: PET
Softjaws (lenght 100mm) for a vise. So that your parts are not damaged when clamped in the vice. With three holes on the back to press in or glue in magnets Ø3x2.
Print approx. €2.12–€2.60 excl. taxPreliminary estimate for PETGSource material: PET
Hello, Welcome to my profile, full of models and miniatures :-) I have here for you Airsoft Sniper VSR piston and spring pin. I have 2 variants of piston (both work even on stronger springs) And the pin, it is better to put a bearing or a…
Print approx. €3.41–€4.16 excl. taxPreliminary estimate for one variant
A joke that I've spent too much time on: One of my airsoft teammates loves watching the hottest trends in the real “tacticool” shooting and considering the choice of a muzzle device, often kept repeating, that the best type ever is the…
Print approx. €0.18–€0.22 excl. taxPreliminary estimate for PETGSource material: PET
This is remix of C920 Ball Joint Mount for Articulating Camera Mount for Prusa MK3 for usage with MS Lifecam HD-3000.
Print approx. €0.96–€1.17 excl. taxPreliminary estimate for PETGSource material: PET
I recently purchased a new Softsoap bottle because the old one was getting seriously gross--even after years of (lots of) cleaning. Lo and behold the corporate scoundrels at Colgate-Palmolive have modified the pump to dispense way too…
Print approx. €0.07–€0.08 excl. taxPreliminary estimate for one variant
I bought this camera to monitor my prints using Octoprint, I found the moving bed on the Prusa made it was hard to capture a cool time-lapse. This camera arm is pretty quick to print and is a really simple install. I printed mine in…
Print approx. €0.88–€1.07 excl. taxPreliminary estimate for one variant
PolyDryer Annealing Mod – Soften, Dry & Anneal Your Prints This mod platform is designed to be placed inside the Polymaker PolyDryer , transforming it into a more versatile tool for makers. By elevating objects inside the chamber, it…
Print approx. €0.10–€0.12 excl. taxPreliminary estimate for one variant
Simple Bracket to install a webcam on the Prusa Mini. WebCam Model: Microsoft LifeCam HD-3000 Its purpose is to offer a clear view of the nozzle and layers. Here's an example of what you could see during printing. Because the Cam is…
Print approx. €1.24–€1.51 excl. taxPreliminary estimate for one variant
A simple magazine holder for glock magazines with Molle support. Can be used for a plate carrier or simply in the pocket if equipped with Molle. Printed with PETG... as seen in the model a reinforcement in the area of the Molle clips on…
Print approx. €3.63–€4.44 excl. taxPreliminary estimate for PETGSource material: PET
This is a simple but sturdy hook that clips securely on to the 42mm x 42mm rails of an Ikea KURA bed. I printed it in PLA, but other materials might work even better. It has no problem holding towels, robes, headphone or even a bag full…
Print approx. €0.47–€0.58 excl. taxPreliminary estimate for one variant
I have an old no-name M4-style softgun which uses non-standard rear-feeding STANAG-style magazines, which are very hard to obtain today. As some of the interal parts of my original magazine has cracked over time, I decided to…
Print approx. €3.58–€4.37 excl. taxPreliminary estimate for PETGSource material: PET
foldable holder, the joint holes measure is 2.3mm, so raw filament can be used for the final assembly. some WD40 and small screwdriver to clean the passages are needed in order to ease the final assembly 2 printing files due to dimensions…
Print approx. €4.61–€5.63 excl. taxPreliminary estimate for PETGSource material: PET
The Microsoft LifeCam Cinema Camera Mount is a great option for those looking to monitor their 3D prints. This camera mount is designed to work with the Articulating Raspberry Pi Camera Mount for Prusa MK3 and MK2 by Sneaks , providing a…
Print approx. €1.48–€1.80 excl. taxPreliminary estimate for one variant
!!!This is not a real weapon!!! Hello, Welcome to my profile, full of models and miniatures :-) I have for you Airsoft Flashlight Holder on R.I.S. This is a flashlight or laser holder that can beautify your Airsoft replica. The flashlight…
Print approx. €1.89–€2.31 excl. taxPreliminary estimate for one variant
Optimized hooks for the inner diffuser sheet of the foldable Godox 60cm x 60cm Softbox (Godox SGGV6060). The inner diffuser attaches to elastic loops inside the Softbox with four small self-locking steel hooks that are fiddly to attach…
Print approx. €2.53–€3.09 excl. taxPreliminary estimate for one variant
Hello, Welcome to my profile, full of models and miniatures :-) I have an Airsoft R.I.S. / R.A.S. handle, grip for you. It is a very suitable option if you like short handles, for which no screw is needed. 2 holes are for M3 screws, but…
Print approx. €4.86–€5.94 excl. taxPreliminary estimate for one variant
3 variants available: [wPlate] => Get SSR90 size with rubber butt cover ( Cover from AirsoftPro ) [Nature] => Get SSR90 size without the additional cover, provide bigger space [eone_remix] => Same sizes as enone version, just rounded…
Print approx. €1.03–€1.26 excl. taxPreliminary estimate for PETGSource material: PET
A sight mount with picatinny rail, that fits to the Novritsch ssp18 airsoft pistol. Material: PLA Nozzle (what I used, works well with others):0,6mm You don't need any other parts than the screw, that holds the stock sight in place. I put…
Print approx. €0.34–€0.41 excl. taxPreliminary estimate for one variant
Put crushed ice inside. Since the seidel has an insulating layer against the outside, it will keep the drink cold for several hours. Especially if your drink is refrigerator cold in the first place. The drink will go from 4 degrees…
Print approx. €11.51–€14.07 excl. taxPreliminary estimate for PETGSource material: PET
flash hider for airsoft https://www.printables.com/model/578627-fgc-6-fgc-9-mkii-stingray-flash-hider-14mm-ccw-for
Print approx. €0.29–€0.35 excl. taxPreliminary estimate for one variant
Non c'è molto da dire... per montarlo serve una vite M4x30 MATERIALE: ECO-SMART PRINTOLOGIST
Print approx. €1.77–€2.17 excl. taxPreliminary estimate for PETGSource material: PET
Hello, Welcome to my profile, full of models and miniatures :-) I have here for you Airsoft Sniper VSR Remington 700 sheet for legs. It is a replacement sheet, if you need it, the original one is lost or destroyed. It fits perfectly! It…
Print approx. €0.57–€0.69 excl. taxPreliminary estimate for one variant
I needed an adjustable filament spool holder for my MK4 and MK2.5 BEAR Prusa printers that can stand next to the printer. I couldn't find one on Printables that would meet my needs, because I didn't have real bearings to use at the…
Print approx. €3.62–€4.42 excl. taxPreliminary estimate for one variant
A short grip for your APS CAM870 A short grip for your APS CAM870. There are 2 versions. Both are available with and without threaded inserts. “Integrated Loop” - Allowes you to use a simple fabric sling adapter. “APS Sling Loop” - Uses…
Print approx. €0.43–€0.52 excl. taxPreliminary estimate for PETGSource material: PET
used 10% cubic infill, bit of supports around the fillet on the heatbed, PETG
Print approx. €4.31–€5.27 excl. taxPreliminary estimate for PETGSource material: PET
!!!This is not a real gun!!! Hello, Today I have for you Airsoft AK 47, AK 74 front sight. It fits perfectly in its place. The appearance is authentic. Requires M3 bolt. Modeled after the Cyma AK 041 template and photos from the internet.…
Print approx. €0.26–€0.32 excl. taxPreliminary estimate for one variant
!!!This is not a real weapon!!! Hello, Welcome to my profile, full of models and miniatures :-) I have for you Airsoft Steyr AUG rails R.I.S. system . This is a system of rails that can beautify your Airsoft replica. The rail system is…
Print approx. €4.95–€6.05 excl. taxPreliminary estimate for one variant
A simple follower design. Use it as a spare part, or to change the color of the follower to be more visible in use. The model is already oriented for optimal printing, resist your urge to turn it around.
Print approx. €0.49–€0.60 excl. taxPreliminary estimate for PETGSource material: PET
New office, new desk setup. I recently found a new job and on the new desk I have a lot of stuff laying around: pens, USB keys, sticky notes… What a better opportunity to design a custom desk organizer to keep all my stuff. Furthermore, I…
Print approx. €9.06–€11.08 excl. taxPreliminary estimate for one variant
Ramka do powieszenia w dowolnym miejscu domu. Służy do strzelania na sucho do tarczy z airsoft gun. Po zamontowaniu od tyłu ramki dowolnej sklejki czy tablicy korkowej i przyklejeniu do niej cienkiej gąbki i następnie materiału jest…
Print approx. €0.48–€0.59 excl. taxPreliminary estimate for PETGSource material: PET
https://www.smithsonianmag.com/smart-news/mathematicians-discover-a-new-class-of-shape-the-soft-cell-180985124/ Model has some fillets applied, otherwise the edges are too sharp to print.
Print approx. €4.47–€5.46 excl. taxPreliminary estimate for PETGSource material: PET
!!!Not a real weapon!!! Hello, Today I have an Airsoft AK47 front sling eye for you. If you accidentally lost it or broke it. It fits perfectly! :-) The printing is quite demanding! Good luck with the printing! I used ABS/ASA as the…
Print approx. €0.13–€0.16 excl. taxPreliminary estimate for one variant
I own two of Microsoft Wireless Mobile Mouse 4000, and the rubber coating on the scroll wheel has gradually worn and come off on both mice. I have designed a replacement part. I have printed it with TPU, and it fits well without need for…
Print approx. €0.07–€0.09 excl. taxPreliminary estimate for one variant
My softtube connection for my Nvidia 3090 Active Water-cooling Backplate became loose two times already (one side was disconnected). To fix this, I created a securing bracket to keep it in place. Printing I printed it on a Prusa Core One…
Print approx. €0.06–€0.08 excl. taxPreliminary estimate for PETGSource material: PET
Printing Material and settings should not be all that important. 0.4 nozzle with 0.2 layer height walls and infill: defaults will be fine print orientation: same as STL OpenSCAD Requires HSW lib and BOSL2, see here for detail .
Print approx. €0.12–€0.14 excl. taxPreliminary estimate for one variant
Mount to install Microsoft Live VX2000 or Microsoft LifeCam Cinema in the PrusaBox made by https://www.printer-box.com This mount was created to get the possebility to use “old” Microsoft WebCams togehter with the [Prusa] Box. Needed…
Print approx. €0.62–€0.76 excl. taxPreliminary estimate for PETGSource material: PET
The bracket was designed for a roof with a 50deg pitch. It may not work on really shallow roofs. It prints without supports. As there are no fillets between the bracket and the plate (in was a hack in a hurry, there is an issue with…
Print approx. €2.51–€3.07 excl. taxPreliminary estimate for PETGSource material: PET
Fatigué de m'ouvrir le crâne sur la poignée de la descente du carré en remontant panneau fermé, j'ai remplacé la poignée en bois par ce modèle qui conserve la forme d'origine. La poignée est maintenue en place par un noyau vissé en…
Print approx. €1.15–€1.41 excl. taxPreliminary estimate for one variant
100x160mm sign, with art of a cabin and text "Do you live around here often?" Mesh and Solid (may print easier) models provided. Best with color switch above 1mm, as with included gcode. Pictured in Shadowbox Frames , which fit all of my…
Print approx. €1.83–€2.24 excl. taxPreliminary estimate for one variant
👇 See sizing instructions below 👇 Original Tingivese Description This is a remix on ohmg's tape measure holder . Thank you for providing the STEP file! My wife's tape measure had a rivet holding on the metal end, so I had to make a notch…
Introducing the Loftyo figure! The incredibly articulate, insanely expressive action figure for displaying, playing, and animating. This figure is the result of five basic craft prototypes, hundreds of hours spent learning blender and 3-D…
The source marked this model as adult content.
OrcaSlicer (Bambu Studio SoftFever) Profiles for X1 Carbon These are my tweaked/tuned profiles for the X1 Carbon. They are not designed for Bambu P1P printer but may work on it as well, use at own risk. UPDATE LOG CAN BE FOUND ON THE…
These cabinet knobs are pleasant to the touch thanks to spiral narrow ribs all around. There are five basic shapes (3 bigger and 2 smaller) in the back-mount version (A1, B1, C1, D1, E1) and same in the front-mount (A2, B2, C2, D2, E2)…
Summary Soft Tape Measure Spool for a 5/8" wide, 5ft long soft tape measure. Super glue end of pin into core. Print Settings Printer brand: Creality Printer: CR-10 Rafts: No Supports: No Resolution: 0.4 Infill: 20% Filament brand: Any…
Inspired by The DOM organizer. I modified the dugout organizer design made by John Tedesco ( https://www.tinkercad.com/users/hRCDevMzLeH-john-tedesco ) https://www.tinkercad.com/things/4cf5V6weAc0-dugout-organizer The design of the bottle…
Surefire SOCOM 2 Series (14x1 CCW) made in Fusion 360 This is not an “exact” replica of the Surefire SOCOM Series, I found a few on thingiverse but they don't print very nice, and need support. So I decided to make one myself (for airsoft…
Do you like Managed Democracy? Well now you can spread it all over your local airsoft field! When I posted the original Backhammer kit for the PLR-16, people brought up its similarity to the Liberator from Helldivers, and suggested that I…
Description : This slim & sturdy wallet has room for (6) cards and a bonus slot in the middle for paper cash. Why no coins? …Because: My Money Don't Jiggle Jiggle, it Folds . (sorry could not resist… lol). The model is quite versatile &…
Hi! This is another Electric speed loader for Airsoft. This is the basic version. You can also get the upgrade package here: https://cults3d.com/en/3d-model/game/airsoft-electric-speed-loader-upgrade-package-to-advanced-version It counts…
Dart Holder Dart Rackstand for soft and steel Darts.
I present to you the cover that I modeled directly around the official 3D model of Flipper Zero. The thickness of the bumper is 2mm It was made with a very soft TPU due to the wrapping surface of the case and the difficulty of inserting…
Grenade Launcher Airsoft Used screw: 3x25 for body 3X 3x15 for pistol grip 2X 3x10 for RIS rails 4X Used spring: D/d = 8/0.8 mm L=10mm or similar 3D printing settings Plate1: 0,2 mm layer 8 walls 30% infill no supports Plate 2: same as…
This is a stackable Airsoft Suppressor Baffle that I made for Surefire LLC replica suppressor. Print as many as you need and just stack them. Each one is 16.6mm high, and they have 1.6mm overlap, so a stack will be N*15mm+1.6mm high,…
6 different sized airsoft grip. Use 5x30 mm hexbolt. Printed with 0,6 mm nozzle. 3-4 walls. 0,24 layer height. 20% infill. Printed in PLA + 870 3DLAC. Very strong. You can also use fussy skin to give it some grip. I used 0.3mm fuzzy skin…
Why Just a simple picatinny mount that you can use to mount anything you like. Use it as a starting point for your own designs....or just print it and glue something to it. Maybe you've always wanted to mount your wisdom tooth to your…
Make working Lexington automatic pistol from Cyberpunk 2077 out of Action Army AAP01! This print replaces original upper receiver and outer barrel and reuses most of the screws. Might require little bit of sanding but in my case was not…
The source marked this model as adult content.
Functional 3d printable airsoft ak body kit with folding stock. Uses standard airsoft ak internals. Includes stl and step files. Takes about 1kg of material to print. I desingned the model with 0.25 mm tolerances between each part.…
The Manticore is (to my knowledge) the first shell-ejecting blowback 40mm launcher in the world. It uses HPA to cycle short 40mm grenades (shells shorter than 90mm), and fires in semi-auto. I recommend printing all of the parts for this…
The Libra Classic break action shotgun, in 40mm form! Compatible with all standard 40mm airsoft grenade shells. All build instructions and files are below, including .f3d and .obj files for that sweet, sweet remix culture. In addition to…
Use 100% infill, mine was printed with Prusament PLA and it can tank shots from a Tokyo Marui GBB pistol with no problems (300ish FPS). You can make it thicker (source file included) or stick something on the front to absorb the impact if…
Dies ist ein Waffen Ständer für mein Airsoft Gewehr. Damit lässt sich die Waffe wunderbar horizontal präsentieren. Das Magazin ist völlig neu designed, inspiriert habe ich mich von den Magpull und ETS Magazinen. Zum verbinden des Magazins…
100% Accurate Frame Model (for airsoft)
Added a raised flat handle to make turning easier. July 2024 :- Updated handle files to match the different base sizes from codysechelski project
Brief History of the Karambit: The karambit was originally an agricultural implement designed to rake roots, gather threshing and plant rice in most of island Southeast Asia. It's a smaller variant of the Southeast Asian sickles. It still…
Is it practical, useful, and expands on the body of human knowledge? Probably not, but it sure is satisfying.. Introducing the Soft Box! My Cloth 3d Printable fabric has a secret super-power, it can be built into 3D objects! Why 3D print…
![Edge Softening Sander [REMIX]](https://media.printables.com/media/prints/992260/images/7556865_921559ee-72b6-4732-845a-be6e2c853006_b0a7fddd-1e94-40c3-90de-dfcf83dd8349/calle-a-poncer-chanfrein-2.jpg)
![Prusa Mini - Webcam Bracket [Microsoft LifeCam HD-3000]](https://media.printables.com/media/prints/266287/images/2372282_53a8f52f-bd66-4ee3-8ed8-b10978ce0876/prusa-mini-braket-for-cam-v2.png)
