Counting matching models…
Remix of "Parametrizable Rugged Box (OpenSCAD)" by https://www.thingiverse.com/thing:4768000 Added options for inner dimensions and user friendly parameters: https://www.youtube.com/watch?v=rp665S-Zts8 As you can see in the video you can…
Rollerski and poles carry holder. Securely holds everything in place while you travel to the ride via any menas of transport or by walking. Easily adaptable to particular rollerskis thanks to OpenSCAD source. Simply adjust parameters in…
Attachment mounts for lightweight cameras with standard tripod screw (1/4-20) Usable for baby cameras, web, streaming cameras or any other lightweight cameras. Shelf side mounts are designed for Ikea Kallax shelf top section and baby…
This model is designed for cutting fondant then applying the double happiness symbol to the surface of a a wedding cake. The model is created from a black and white image. First the image is processed using InkScape to produce the file…
The original model looked great when the other half saw it, and wanted some for the closet. After quickly realizing that our builder selection had only a single top support rod instead of 2, I closed off one in the slicer to test. Close…
Inspired by Pixiemagic's wall mount, I wanted to be able to create a more adjustable design in OpenSCAD for different sizes pops while also rounding the edges a touch. You can also use these in a dual configuration, one on top and one on…
This allows dual RCA phono jacks to be mounted inside a case where the back panel is sloped at 45 degrees. I have a Revox B790 turntable that I am refurbishing and the phono cable was hardwired. This will allow me to disconnect the phono…
H4Mのアクセサリーとして同梱されている50MHz〜6GHz20dBアンプのケース タイトに作成しているので、AMP基板によっては入らないかもしれない。 Case-AとBの固定は爪以外にボスの0.05mmのオーバーラップを利用している。 基板をCase-A,Bのボスで挟み込みガタツキを防止している。 一旦ケースを組み合わせると分解は困難。 開封にはCaseの天板と側壁の隙間に薄い板を差し込み、こじりあける。…
Fully parametric box generator in OpenSCAD (updated to v.1.4 - 24.3.2025) This is a feature library for OpenSCAD for rugged boxes that can be printed at once. It is not designed for boxes with separate bottom and top parts. There are two…
Ancient Greeks knew about them; the Platonic Solids are fascinating. You can read all about them here: https://en.wikipedia.org/wiki/Platonic_solid These are the solid shapes of the 5 Platonic Solids. The solid shapes are here . <this…
Ancient Greeks knew about them; the Platonic Solids are fascinating. You can read all about them here: https://en.wikipedia.org/wiki/Platonic_solid These are stick and ball shapes of the 5 Platonic Solids. The solid shapes are here . The…
Ancient Greeks knew about them; the Platonic Solids are fascinating. You can read all about them here: https://en.wikipedia.org/wiki/Platonic_solid These 5 models are hyperbolic shapes of the Platonic Solids. The solid shapes are here .…
Ancient Greeks knew about them; the Platonic Solids are fascinating. You can read all about them here: https://en.wikipedia.org/wiki/Platonic_solid The solid shapes are here . The stick and ball shapes are here . The hyperbolic shapes are…
OpenSCAD Quad Lock 360 Base A base adapter for Quad Lock 360 mounting components. I had a project where I need to create a base for a Quad Lock 360 MAG Wireless Charging Head. Not finding one in OpenSCAD, I put this together. The…
round tray with lid | runde Dose mit Deckel | different sizes | customizable OpenSCAD- Script → 0.4 Nozzle → 0.2 mm Layer Height → 20 - 30% infill → PLA
This is based on / beruht auf: Bibliothek für Evolventen-Zahnräder, Schnecken und Zahnstangen Autor : Dr Jörg Janssen Stand : 29. Oktober 2018 Version : 2.3 Lizenz : Creative Commons - Attribution, Non Commercial, Share Alike Thingiverse:…
This is based on / beruht auf: Bibliothek für Evolventen-Zahnräder, Schnecken und Zahnstangen Autor : Dr Jörg Janssen Stand : 29. Oktober 2018 Version : 2.3 Lizenz : Creative Commons - Attribution, Non Commercial, Share Alike Thingiverse:…
Verbindungen, Adapter: Statikteile mit S-Riegel verbinden ft-Nuten und Federleisten einbauen ft-Rastachsen verwenden Erweiterungen des ft-Systems: Hohlwelle (hollow shaft) 10 mm mit Durchgang für ft-Achse 4 mm) einbauen, adaptieren…
Some power tools may have special diameter for vacuum cleaner connection instead of standard one. This is the case with my sanding machine. So I created a very simple adapter. Current one is made for connecting Bosch PSS 250AE sanding…
Parametric Hieroglyphic Alphabet. Just set you word and that's all. Replaced all bitmaps with vector hieroglyphs, so render is faster and better. Partially rewrite of code. IMPORTANT Decompress Alphabet.zip once downloaded. Update…
Yes, another spool drawer ! Dozens of models are available. I looked at them, I was inspired by the best of every ones. Here it is. This one is fully customizable : Spool size (width, height, depth) Number of racks Number of floors Number…
An OpenSCAD script to generate a store hours sign. Use filament change option in slicer to change color.
I wanted to make a Raspberry Pi Zero-based internet radio, which now works nicely and is called ‘PiZeRadio’. This model provides a case to hold the Pi Zero, a PCM5102 Digital Analogue Converter (DAC), and outputs to a pair of RCA red and…
OpenSCAD: Zubehör und Adapter auf fischertechnik (ft) Zum Aufbau von neuen Teilen oder Grundkörpern: - Nuten liegend und stehend, flach und als Vollrund - Federleisten - Rastachsaufnahmen - Hohlwelle: Antriebswelle für ft-kompatible…
This OpenSCAD code is just a few lines that will make a cube with rounded corners. It works very like the ‘cube’ statement. This code is a module so, instead of the call looking like “cube ([123, 234, 345]);”, the call would be “nice_cube…
Preface There are good HSW OpenSCAD customizers out there as well as libraries to generate attachments, some I collected in this collection . What I found lacking was the ability to generate attachments on a grid and the ability to…
Seilspanner, Gesamthöhe 10 mm, sehr fein einstellbar fischertechnik-kompatibel, Grundfläche 20 * 30 mm (5 mm breiter als ein BS30). Mit Hypozykloidgetriebe 1:56 zum Antrieb der Seiltrommel, nicht rückdrehbar. Gedacht z.B. für Angelschnur.…
This dust protector wraps around the gap under the Core One L side panels with an angle to divert anything away from the edge. Each section uses two 6x3 mm round magnets which press fit in the sections. These have to go on the arms to get…
Parametrická klíčenka / přívěsek v OpenSCADu se dvěma řádky textu, ouškem s dírkou a vystouplým vnitřním rámečkem. Součástí je i zdrojový .scad soubor – stačí upravit pár proměnných vyrenderovat a exportovat STL. Jak upravit text…
Ancient Greeks knew about them; the Platonic Solids are fascinating. You can read all about them here: https://en.wikipedia.org/wiki/Platonic_solid These 5 models are Kleetope shapes of the Platonic Solids. See:…
Ancient Greeks knew about them; the Platonic Solids are fascinating. You can read all about them here: https://en.wikipedia.org/wiki/Platonic_solid These 5 models are the Safe version of the Kleetope shapes of the Platonic Solids. See:…
I've seen a variety of methods for printing reinforced drywall anchors, but haven't found one that printed reliably on my printer and did the job. So I've borrowed some ideas from those other places and created my own version in OpenSCAD.…
Ancient Greeks knew about them; the Platonic Solids are fascinating. You can read all about them here: https://en.wikipedia.org/wiki/Platonic_solid These 25 models are Christmas Ornaments of the 5 Platonic Solids. These models have a ring…
I asked her what she wanted for Christmas and she said for me to take out the trash and recycling once a week, so I printed 52 of these coupons. Each one says: DOMESTIC SERVICES AUTHORITY OFFICIAL SANCTIONED VOUCHER for Trash+Recycling…
Plus d'infos sur www.telmi.fr Mise a jour aout 2026: -HP plus volumineux (ce modele: https://fr.aliexpress.com/item/1005008267342362.html ) Le seul HP offrant un vrai bon son en shuntant le HP d'origine! (sur la douzaine de modeles…
This covers the top of the rails of my 20' Louisville extension ladder. I printed it in TPU to stop the ladder from scarring the house. The openscad file has been parameterized so that the width, height and depth can be adjusted to fit…
This OpenSCAD script illustrates customized signs using the template models provided. These will fit my Shadowbox Frames , like all of my signs . For artwork, I have had best results stomping pictures into 1 bit black and white (black…
All ice scrapers obviously go dull after enough use, unless you use materials that will damage the glass, at which point you will know that your obsession with blade longevity is not quite healthy. Or cheap. This remix of Genghis' very…
FirstBox is a standardized, parts box designed to stand on end like a book on a shelf. Instead of stacking awkward plastic organizers in unstable piles, FirstBoxes line up neatly with readable spines, making them easy to identify from…
📐 Parallel Guide for POWERTEC / Milwaukee Track Saw Rail This is a single-piece, 3D-printable parallel guide designed to slide into a POWERTEC track saw rail (Milwaukee-compatible, but should work with Festool and Makita). and provide a…
This is a fully parametric rectangular tray designed in OpenSCAD , intended to print cleanly on FDM printers while maintaining a finished, “manufactured” feel. The design focuses on: smooth exterior edges that won’t snag or feel sharp, a…
This is an OpenSCAD implementation of the openGrid system. This is a very basic implementation and it's missing some notable features, such as connecting pegs. I'm happy to add features as requested.
Couldn't find a bike grip I really liked with a cursory search. So here is my version. The grips provided as STL files have the following dimensions: Length: 135mm Inner diameter: 22mm Outer diameter: 30mm Also attached is the OpenSCAD…
A dolos is a wave-dissipating concrete block used in coastal management. It is a type of concrete tetrapod weighing up to 8 tons. The printed PLA model from dolos.3mf is 28 grams. The real dolos is 259,000 times heavier. You can read more…
These hangers were designed for SteelSeries Artic Nova Pro wireless headsets, but probably work for most other headphones/headsets. If resizing is needed, the 80-or-so line OpenSCAD file is included for you to modify. The rail version is…
This is a parametric 3D mechanical model created using OpenSCAD. The design includes a metallic hemispherical gear with teeth, meshing with a smaller spur gear. Parameters like radius, number of teeth, tooth height, and width can be…
Power Strip / Power Distribution for XT60 connectors. Multiple models are available. Variations include: 2 through 6 Female XT60 Outputs with 1 XT60 Male Input. Optional Power Switch. Optional Mounting Tabs for all Variations. The model…
This is a parametric 3D mechanical model created using OpenSCAD. The design includes a metallic hemispherical gear with teeth, meshing with a smaller spur gear. Parameters like radius, number of teeth, tooth height, and width can be…
This is a parametric 3D mechanical model created using OpenSCAD. The design includes a metallic hemispherical gear with teeth, meshing with a smaller spur gear. Parameters like radius, number of teeth, tooth height, and width can be…
Files provided include .stl, .step, as well as a fully parameterized Autodesk Fusion model for any necessary updates to size to fit different components. Stock model will fit a Raspberry Pi Zero W/2W, along with the 5V power supply and…
This is an openscad design with all parameters at the top and labeled and commented. My goal was to make it easy for you to borrow and use this design. I use an anycubic kobra 2, i.e. one color at a time, so I designed the text to sit on…
Just a simple remix of my first one with fewer curves and more crunchy hard edges. Otherwise identical to my first remix apart from some very minor refactoring. For more info, see PolyPearl Tower Torture Test (OpenSCAD Remix) .…
This is a parametric 3D mechanical model created using OpenSCAD. The design includes a metallic hemispherical gear with teeth, meshing with a smaller spur gear. Parameters like radius, number of teeth, tooth height, and width can be…
This is a parametric 3D mechanical model created using OpenSCAD. The design includes a metallic hemispherical gear with teeth, meshing with a smaller spur gear. Parameters like radius, number of teeth, tooth height, and width can be…
This is my third variation on the heart theme in openscad. This is supposed to be divided like for a box of chocolates, but really, the compartments are more earring size (with my setting). Replace the text parameter near the top of the…
Introduction to the ruler A ruler is such a basic daily thing that I barely give it a second thought as did I starting this project making a basic ruler to build upon. This is so much harder than I anticipated. OpenScad facilitates a…
I designed this rip fence to model the MK 159751 rip fence in approximate proportions. It's written in openscad so you can change the parameters as you'd like, they're clearly marked. The model number of the saw its pictured on is the…
This is a recreation of the 134577-MK 45° degree flat guide for cutting tile on an MK tile saw at a 45° angle. It uses a 1/4-20 nut in the back of the mount, which I glued in. I don't include the knob. There are a bazillion of those out…
Ancient Greeks knew about them; the Platonic Solids are fascinating. You can read all about them here: https://en.wikipedia.org/wiki/Platonic_solid These are edge shapes of the 5 Platonic Solids. See the photograph of the drawing by…
Printed with Recreus FilaFlex Foamy TPU (Denim) & Recreus FilaFlex SEBS use 3mf file to print, wrote a small article about it if interested Default design files are for size eu 33, full length evaluates to 218mm. Just scale everything for…
French Cleat Shelf Bracket Generator – Fully Parametric OpenSCAD Model .scad file generator .stl files for 100, 150, 200, 250 and 300 mm Shelf Bracket This project is a fully parametric generator for creating custom French‑cleat shelf…
Update: Added height map support This is an OpenSCAD module that let's you easily (well kinda) create 3D text. I've emulated the Atari 8-Bit fonts A-Z, a-z, 0-9, and most punctuation. You can create them a letter at a time or pass an…
This model replaces the original granulate tray for the Humydry moisture absorber in case you've lost it or something, it does not provide additional features. There seem to be different models, this one is suited for the 12cm x 12cm…
On busy days, I would often lose track of whether I'd taken my daily prescriptions. This organizar/tracker prevents that. There are 4 versions, holding 2-5 standard-size prescription bottles (39mm diam, 71mm tall), and a rotating dial…
This OpenSCAD script generates a 3D printable, three tiered pagoda designed specifically to print without supports. It uses parametric loops to stack a decorative foundation, recessed wall sections, and flared roofs that taper in size as…
This takes Onejensen's original file, and slices across the axis specified at the point specified, then extrudes the slice to the length specified. This came about because there were indications that Onejensen's file had differences in…
Ancient Greeks knew about them; the Platonic Solids are fascinating. You can read all about them here: https://en.wikipedia.org/wiki/Platonic_solid You may have heard of the hypercube. These models are the hyper shapes of the 5 Platonic…
This model will hold your paint pad. You can buy paint pad refill and you don't need to buy the applicator for holding the paint pad. This model is designed to hold BEHR brand "Edger Refill Pads for Edgers", but I think it will work with…
Parametric Drill Guide / Edge Fence Template (OpenSCAD) A customizable drill guide template for repeatable hole placement. This model is fully parametric in OpenSCAD, so you can quickly set exact hole locations, hole diameters, guide…
This model was created specifically for reliable printing on common FDM printers — no supports required and minimal tuning needed. The geometry avoids sharp internal corners and uses gentle fillets so TPU prints cleanly without blobs or…
A fully 3D-printable Pokéball model featuring a functional hinge mechanism that allows it to open and close. Designed with accurate proportions and a smooth, seamless fit, this model is perfect for collectors, tabletop gaming, or display…
OpenSCAD-Skript (parametrisiert) für: generische Teile: Schrauben, Gewinde, Bajonettverschluss gerade + rund fischertechnik: Nabe für Hohlwelle 10 mm Die dargestellte ft-Drehscheibe ist nur ein Dummy. Benötigt weitere Dateien aus der…
Grundbausteine, parametrisiert, für OpenSCAD. Version 25, ersetzt v18 und v19 Rohr (tube) mit Fasen (ein/auswärts), Anschrägung (Konus), Sektor, uvm. Box mit Fasen (alle Außenwände) Stern (Objekte im Kreisbogen) Reihe (Objekte entlang…
I've made a few fidgets designed by others, but never tried designing one before. This is my first attempt and is perhaps a bit overengineered. But it meets my design goals: easy to operate, fast and easy to print, no support needed, and…
Die Gesamthöhe wird auf ein konfigurierbares Raster ausgerichtet. Der Antrieb (Achse, Kupplung) wird als children() übergeben. OpenSCAD toolset for bevel gears and differentials. Total hight is adjusted to meet a configured raster. Center…
Stirnzahnräder, Hohlräder, Planetensatz: - Zahnformen können beeinflusst werden: Kappen, Einzug, Kontur (nur Hohlrad), Schrägverzahnung - Planeten erhalten Markierungen für die Einbaupositionen - Zähnezahlen werden eingeprägt (bei 0,25 mm…
Planetengetriebe für fischertechnik. Die Trägerscheibe nimmt 3 Planeten auf. Diese sind in je einem Drehteller gelagert, so dass der Abstand zur Sonne variabel ist. Die Planeten haben modul 1. Zur Verwendung mit der Hohlwelle 10 mm,…
I wrote an OpenSCAD script (with Gemini's help) that generates support fins for added stability with minimal part contact while printing. The customizer has a plethora of variable sliders that can be modified, including rectangular,…
Хранилище стиков для IQOS сделано по мотивам https://www.thingiverse.com/thing:4755166.Модель настраиваемая, есть исходный код для Openscad Две модели готовы для печати - для 10 пачек и для 5. The IQOS stick storage is based on…
There are plenty of other parametric dice available, but this model is special because it’s mine. Pip placement conforms to JackAce’s die schematic . Now if only I could figure out how to make a multicolor 3MF that displays properly in…
A clean, parametric cable cover designed for the Lian Li x DAN A3-mATX case. It hides the PSU cable bundle visible through the tempered glass side panel, matching the white aesthetic of builds like the DeepCool PN850M. This cover is…
I use the Shokz OpenSwim Pro for swimming. These headphones come with a nice soft case, but I found that often the power button could get pressed while through the case while it was in my swim bag. To preserve battery life, etc. I created…
Parametric Stackable Storage Tray OpenSCAD tray with a built-in stacking foot. Set your Gridfinity footprint, partitions, and textures, then print as many as you need. I noticed that if I could stack the grids for small hardware I could…
How to Always Achieve the Optimal Bridging Angle In most slicers, you can only set a single bridging angle, which then applies to all overhangs. This isn’t ideal for circular overhangs or those with complex paths. Ideally, the bridging…
The openscad design can be configured with the following parameters: Size: the inner size of the basket in gridfinity units Grid_l: gridfinity grid horizontal size in mm (42 mm is the standard) Grid_z: gridfinity grid vertical size in mm…
Upright organizer stand with a 4x4 grid of 15mm slots, 80mm tall. Good for rasps, files, small screwdrivers, pens, bits — anything with a ~7-8cm shaft you want standing up. Design choices: Solid 20mm band at top and bottom keeps tools…
Introduction Despite having a reasonably sized shoe cabinet, family footwear often spills into the entryway. To solve this problem, I designed a shoe organizer that allows you to stack shoes vertically, effectively doubling your storage…
Tray for an actual stash of coin cells, not the usual blister-pack holder. Each cell stands on edge in a half-cylinder pocket; the top half sticks proud of the tray so you pinch it out with thumb + index. Solid divider walls between…
About OpenSCAD designed and customizable print sheet holder. Supports any print sheet size (max 2mm thickness). Support 1 to 25 (or more) print sheets. Screw and HSW mountable. HSW orientation for horizontal and vertical sheet loading.…
The software has also been modified specifically for this model and his brothers: Father Christmas just looks great with his beard and hat. Spongebob is a little squarer than he should be (to fit in the CPU) but then he does like his…
The IKEA SKÅDIS pegboard is very useful to organise my 3D printing related stuff, such as filament spools , benchies in different colours and a variety of tools. Here on Printables you can find all kinds of great custom SKÅDIS compatible…
Due to the successful use of this component, I have now completely reprogrammed it in OpenSCAD. I was able to incorporate all the points that I had missed in the past. One of the biggest features is that the component can be printed…
Balls are generated randomly within a conical volumne using OpenSCAD. Feel free to tweak the parameters in the code! I also tweaked the parameters on organic supports to get a tree structure I was happy with.
A script to generate a simple WiFi QR-code card for 3D printing using Python and OpenSCAD. Source code and the script usage instructions can be found on GitHub .
This was actually created to hold a dishmatic brush, but can work for broom as it is fully parametric. Current screw default is for M3 screws. ---- Source code provided, so you can learn and make other similar remixes. Some ideas to…
Create awesome art panels using this (very simple) openSCAD script and your favorite SVG editor. Using an online SVG to STL converters are inaccurate, produce geometry errors and exposes your files. Converting by the slicer is very buggy.…
Hi everyone. I am very proud of this one and it has a lot of features. I made this to be used with my Honeycomb Storage Wall setups. As such, whenever I make a model I will simply create it through OpenSCAD, put it into Orcaslicer, and…
Material Swatches are a handy reference for filament colors and materials! The original model provides models for a handful of material types, but is not customizable. This model is built from scratch in OpenSCAD, which allows creation of…
![Rollerski (Skiroller) and poles carry holder [OpenSCAD]](https://media.printables.com/media/prints/1067432/images/8075867_116facf1-d862-494a-a027-1216254b6951_ff1b5bc4-f6d3-4edc-90fa-da83c27c6821/photo_3_2024-11-08_16-18-26.jpg)
![Camera mounts for the shelf edge and for any surface with double-sided tape [ OpenSCAD ]](https://media.printables.com/media/prints/1067473/images/8076221_2d7aa47a-3357-4a89-a00a-223f51c39ef7_22064794-d5cc-4db6-b416-550fcb835d9d/img_20240925_200540.jpg)
![FirstBox - Small-parts Storage System [OpenSCAD]](https://media.printables.com/media/prints/8c7904b7-0cf1-43db-9214-a90cc8058aaf/images/11813805_e4857e8c-fb86-445a-8be4-1df0ea97836d_36fd7466-353f-48f4-82d1-eb99bedd5794/img_20260123_104145.jpg)
