588 models
Update : there is now a version that can be mounted on the X carriage of the Prusa Mini :) Hi !! I'm a jeweler and use my beloved prusa MK3s to design invented custom tools for my craft. The visualizer challenge, encouraged me to create…
Print approx. €0.09–€0.11 excl. taxPreliminary estimate for one variant
An optical illusion for the Prusa MK3S x-axis. Print Instructions Designed to be printed with 3 perimeters. 10% rectilinear infill. Some users have reported issues with 10% infill and have used 100% instead. No support. Before putting the…
Print approx. €1.32–€1.62 excl. taxPreliminary estimate for one variant
Source data: Optical Illusion Pinwheel v2.5 by Dalpek https://www.thingiverse.com/thing:705095
Print approx. €4.51–€5.51 excl. taxPreliminary estimate for one variant
I wanted to create a cool X-axis visualizer for the Prusa Mini. I designed this based on a similar concept that I saw for the MK3S. This visualizer requires (1) 8x3mm magnet and super glue to attach the magnet to the X-Axis. The two…
Print approx. €0.51–€0.62 excl. taxPreliminary estimate for PETGSource material: PET
I made this cable clip for an optical bench. The bottom is thick to hold it flush to the table, and the top is thinner to offer some flexibility in clipping the cables. It mounts to the table with one hex socket head screw. The screw can…
Print approx. €0.40–€0.48 excl. taxPreliminary estimate for PETGSource material: PET
Pentax K body cap with/without the old Asahi Optical Co logotype. No need to use support when printing. Regarding the pictures of the body cap, I have used sandpaper to make a more matte surface. NOTE: Harrow Technical UK writes “We do…
Print approx. €0.59–€0.73 excl. taxPreliminary estimate for PETGSource material: PET
This remix includes both the gyroscope and the optical illusion You can print and use them separately or mix and match them to use together The connectors are made for the MINI but i added an adaptor for the MK3 No magnets required Print…
Print approx. €0.33–€0.41 excl. taxPreliminary estimate for PETGSource material: PET
Below is a video of the x-axis motor visualizer in action when the MINI is printing the motor visualizer itself: You can see that it creates a stunning 3D optical illusion when it is moving. The disc is attached by gluing a 8 x 3 mm…
Print approx. €0.37–€0.45 excl. taxPreliminary estimate for one variant
// Here you can find my new project which also use parts from optical drive https://www.thingiverse.com/thing:5201443 This is upgrade of my previous version I posted here.I also added second actuator without external shaft.These models…
Print approx. €2.09–€2.56 excl. taxPreliminary estimate for one variant
This remix includes both the gyroscope and the optical illusion. You can print and use them separately or mix and match them to use together The x-axis connectors are made for the Prusa Mini+ but should be compatible with the Prusa MK3.…
Print approx. €0.38–€0.47 excl. taxPreliminary estimate for PETGSource material: PET
So as I was saying 67 and thinking about people online saying 41 I thought that I should make this model because literally every kid right now is saying 67 and 41 so, This is Perfect:) If you like 67 or 41 please download this model!…
Print approx. €3.63–€4.44 excl. taxPreliminary estimate for one variant
You may have seen the optical illusion that looks like a vase in the middle, but each side shows the profile of a face. This is called a Rubin Vase and you can read more about it here: https://en.wikipedia.org/wiki/Rubin_vase This model…
Print approx. €1.28–€1.57 excl. taxPreliminary estimate for one variant
Convert your CD/DVD drive from your old laptop into an external optical drive. The case is printed as two pieces and glued together with a bit of superglue. Used components: USB-C Type-c24p Splint Female Head With Data Board USB 2.0 to…
Print approx. €2.76–€3.38 excl. taxPreliminary estimate for PETGSource material: PET
Take apart a ballpoint pen and place the pen within the center. Rotate the rings and see the interesting optical illusion. I first saw this on the Dave Garroway Today Show, channel 4, c 1952. It was motor driven and he did not share the…
Print approx. €1.99–€2.43 excl. taxPreliminary estimate for one variant
Mount for a Matek Systems 3901-L0X Optical Flow and Lidar Rangefinder sensor to fit flush on the bottom of the Rekon 7 drone frame. The mount requires 2x M3x4 and 4x M2x8 fixings to assemble. Route the wires up through one of the holes in…
Print approx. €0.40–€0.48 excl. taxPreliminary estimate for one variant
I made this little cover box for all of the connections on the interface of the iHSV 57 servo motors from JMC. Features included: Holes for PG9 cable glands Slots for optical fiber to read LEDs Use the servo screws to hold in place The…
Print approx. €2.76–€3.38 excl. taxPreliminary estimate for PETGSource material: PET
Theses rings (ring) press fit on top of the Whirl-A-Gig provided by my previous offering. I first saw these on Dave Garaway's popular 7 AM TV show c 1956, channel 4. Your eyes are likely to see the rings roll around each other by magic.…
Print approx. €0.58–€0.71 excl. taxPreliminary estimate for one variant
I got tired of my smart home sensor falling of the wall, so I designed my own wall-mount. I will add more pictures (and maybe drill-holes) after the first prototype print is ready.
Print approx. €1.04–€1.27 excl. taxPreliminary estimate for one variant
Bought a server with the optical drive missing, given its limited use anyway I created this blanking plate with airflow holes to make it look slightly neater. Fits flush to front and presses against a metal plate in the server to hold it…
Print approx. €1.00–€1.22 excl. taxPreliminary estimate for PETGSource material: PET
This model was made for a Plasmonics Internship, where I had to secure the optical fiber. It has a special end to it from another equipment, which I do not record (probably a spectrometer). This model was, in part, inspired by the "…
Print approx. €0.34–€0.41 excl. taxPreliminary estimate for one variant
Motivation Technically speaking, this part is not requred, but I did't like the open cutout in the MDF backwall for the impedance switch. Therefore I designed and printed a blinding part that matches the speaker cable outlet. Printing…
Print approx. €2.07–€2.53 excl. taxPreliminary estimate for PETGSource material: PET
Saw this post on Reddit and decided to make a 3D printed version. It looks even cooler in person! You can see it in action here since gifs do not work on this site.
This print is a conversion from now mostly useless optical drive bays (discs/DVD/CD bays), AKA 5.25" drives. The adapter will fit up to 4 2.5" drives instead and can fit all standard formats (so each of the 7mm, 9.5mm, and 15mm thick…
this is a nice sculpture of a mom and a dad names that varies on the angle you are looking from :)
🌌 Wormhole Wall Art – A Journey Through Space and Dimensions! Create a stunning visual illusion with this futuristic 3D-printable wall art inspired by wormholes, gravity wells and the fascinating geometry of spacetime. The geometric…
Update 2-JAN-2025: Added ExtensionV2 part that adds an extra 25mm to the body length. Update 17-DEC-2024: V2 has an slightly increased width and height since some users were experiencing a very tight fit. Be wary of material shrinkage and…
Hi! This windwheel works wonderfully and because its fully ball beared the slightest breeze is enough to make the wheels spin fast :) Printing: -Parts are constructed that everything is very easy to print even on old 3D printers and not…
Hueforge Optical Illusions Print at 100% infill with a layer height of 0.08mm with a base layer of 0.24mm Filaments Used: PLA BambuLab Basic Black Transmission Distance: 0.6 PLA BambuLab Basic Beige Transmission Distance: 8 PLA BambuLab…
This is a design in a series of Optical Illusions I've created, many of which are inspired by the late Swedish artist Oscar Reutersvärd, who began painting 3D figure illusions in the early 1930s, with the Impossible Triangle (Penrose…
https://youtube.com/shorts/YR8nzGXxVZA?feature=share The Penrose Triangle is a classic example of an impossible object that has captivated people's attention for decades. It was first introduced by Lionel and Roger Penrose, who were…
Remix of Optical Illusion Pinwheel from Dalpek with bigger blades and 608 (2RS) bearings. Turns into the wind. Uses original blades, printed with 180% of original size. Needs three 608 (2RS) bearings and a 4mm diameter rod Print…
This Rotating Rings optical illusion sits on a record player and spins. It gives the impression the rings are spinning on top of each other, rather than just rotating in place. I designed this after watching Steve Mould's video about his…
A set of 6 optical illusion coasters with a box. The pattern is created using a filament swap at around 4.2mm height
Optical illusion coaster than changes pattern at different viewing angles. Watching it print is memorizing!
Simple storage box for the slack of a fiber-optic cable. The box ensures safe storage so that the cable does not fall below the typical minimum bending radius. There are different sizes available. Each box is 9x9 cm large. Only the depth…
The #Lion ...Undisputed king of the savannah. Here it is in 3D, in a beautiful optical illusion possible to achieve thanks to the additive manufacturing. Thanks to @3dpimp (Thingiverse and Instagram) for your help Video :…
------------------------------------------------------------------------ List of released EOS rotor designs (subject to be actualized frequently) EOS_01 rotor design → this post (…
Info An external optical drive bay because no modern case has an internal one :). Usefull if you want a cheap BluRay drive that you can connect to different devices. You'll need a sata to usb adapter to be able to connect it with a usb.…
Možná by bylo lepší vytisknout spirálu z materiálu, který se dá vyhladit, takhle jak se přejíždí po vrstvách, tak to dělá dost rámus :) Spirála se musí zalepit do kolecko2.stl Trochu problematické jsou občas závity v stojánku, ale s…
This piece is used in modern decor to represent emotional mindfulness . The way the figure "holds" its own heart suggests a narrative of keeping one's emotions safe or finding internal balance. The figure doesn’t actually have a solid…
A version of the Ames room at a scale that works for Lego minifigures. If you put a camera 100 mm from the center of the undistorted version of the room then it looks identical to the distorted version of the room. There is a base with…
This design allow to create and keep a loop for the fiber and avoid damaging or breaking it just put double-sided to fix it in the network cabinet. Supports are required for hooks.
A Headset / Headphones hook that attaches to the front of your PC tower. It is made to fit as a cover to one of your 5.25in optical-drive bays. It is currently configured to fit a CoolerMaster Mastercase Pro. Not all cases use the same…
This is a trick, an optical illusion: when the cage is rotated, the bird disappears and appears. The part is completely flat and printed with the same material. Print instructions I made two versions: one for a larger size (95 mm) and a…
This is a design in a series of Optical Illusions I've created, many of which are inspired by the late Swedish artist Oscar Reutersvärd, who began painting 3D figure illusions in the early 1930s, with the Impossible Triangle (Penrose…
The Squarcle is a 3D optical illusion based on the work of Kokichi Sugihara (as seen at https://www.youtube.com/watch?v=oWfFco7K9v8 ) I was so intrigued after watching that that I was compelled to try to replicate it myself! It has taken…
I liked the model as posted by @3DMK which was based on the model of Dalpek . But after printing I found that I do not like the bearing construction between the two big rotors. It was to fragile to my opinion. And I was not able to print…
Here's a purpose-designed bracket to interface with the spring-loaded optical drive pins to add hard drives with some cooling. The other designs were very restrictive and I didn't even try them for fear that the drives would overheat.…
So i lost an optical port plug for my soundbar and i was searching for a replacement, but there aren't a lot of models to print and none fit very well, probably due to being somewhat inaccurate. Then i found this actual connector on…
The stock runout sensor that uses a spring and some bearings got too much resistance, and limited my extruding capability! so I made this optical version, that's smoother, lined to the teeth with ptfe tubing Very “clear” shortcoming…
use supports when printing
Vidéo disponible sur mon compet => https://www.instagram.com/reel/CpA8PRNjf5e/?utm_source=ig_web_copy_link Illusion d'optique du Demogorgon de “Stranger Things”, by Art3Dchoix Imprimable en 0,2mm / Vitesse lente pour la première couche…
The back piece should press fit into the back of the stock stepper motor. The front piece goes on the shaft. I have not tested this with the extruder housing installed since I run modified cooling. Printed in PETG at 0.2mm layer height.…
An optical illusion with multiple arches. The one on the far right appears larger than the one on the left, but all are the same size, which you can prove by stacking them on top of each other. Print 3 of the same model.…
Before and After 6 Beers Optical Illusion nozzle 0,25 layer 0,1mm
A simple enclosure to encase an internal 5.25" Optical Drive, to be used externally with an adapter. Specifically, this was for the Pioneer BDR-209DBK with this adapter https://www.amazon.co.uk/dp/B07JGT17B8 (which is a very simple…
I dont have to say so mutch about this. It was a request of a friend of mine, and now I can't do anything with the model. So feel free to use it :) Happy 3d printing!
This is a drawer for the hidden optical drive bays of the Fractal Pop PC case. I didn't like the way the included drawer wasted some space for the handle so I made my own. It prints without any support, just make sure to remove the small…
Cover for a 5.25" optical drive bay. Uses the screw holes from an actual drive. It can be used with ANY computer case. Most computer case makers include proprietary covers. Drill the holes to about 2.8mm and make thread screwing in a…
Background The PLAb System We all love our friends at ThorLabs, but sometimes you just need a quick part and you don't have the cash or time to wait for one to arrive with your order of Lab Snacks. The solution, 3D printable…
Scopri un fidget toy fuori scala, pensato per catturare l’attenzione e stimolare i sensi. Questo modello combina geometrie ipnotiche e un design dinamico che crea un effetto visivo sorprendente ad ogni movimento. Le linee stratificate e…
You can find the logo of the Kiroshi corporation of games and univer of Cyberpunk 2077.
[UPDATE] There is my upgraded model with integrated limit switches: https://www.thingiverse.com/thing:5173219 I needed a lot of tiny linear actuators so I designed something like this.In most cases all the parts required to build this can…
EDIT: printables doesnt let me add the G-code because of an unsupported line of code that Prusa slicer does not recognize. Therefore here is a google drive link:…
Optical Illusion Decorative
I dont have to say so mutch about this. It was a request of a friend of mine, and now I can't do anything with the model. So feel free to use it :) Happy 3d printing!
https://youtube.com/shorts/YR8nzGXxVZA?feature=share An impossible object is a visual illusion that tricks the mind into perceiving an object that is impossible in the real world. It's a form of optical illusion that challenges our…
See here an awesome make, made by afourney Optical illusion - a following skull "Murray" (from Monkey Island) appears to be following you with his eyes and head. Watch the animation below. The principle is quite simple, but it looks…
Stranger Things STRING ART 3D optical illusion By Art3Dchoix ================================================ Voici le modèle en vidéo : https://www.instagram.com/p/Cg4rh3ejF_4/ Photos : https://www.instagram.com/p/ChNeUuxI5NS/ Pensez à…
Impossible Gas Giant An optical illusion disguised as a simple tabletop spinner. Give it a fast spin and watch the supporting arms fade from view. For a moment, the central gas giant appears to float freely inside its rings—creating a…
********************** Update 30.04.2024 *************************** I've just puplished a redesigned version of this windwheel NoGlue Giant Optical Windwheel (40cm/15,75" diameter) This is a no glue version! So every part can be…
I use this Optical Limit Switch Module on my Magnetic IDEX printer build. I like the size and price of this little module 😊 Here is an amazon link: https://amzn.to/499U2Ue See sensor demo here:
The shape consists of 10 individual squares (and a center one) increasing in size. After printing, the individual squares are provided with increasing angle bending by means of a mold. The mold can of course be used several times! It is…
This can be used for liquid measurments/precision feeding, its not medical or cyber junkie equipment My another project with optical drive parts... I was asked if these stepper motors would have enough force to move a syringe so I decided…
Created this small cube that should be 20x20x20mm to test stringing + bridging capacity. Quick and use little materials. It also pairs as a fun optical illusion.
Remixed the model by Dynamite to fit the wheels on the print sheets of a Prusa MK3 and MK4 Parts which are original an can be downloaded via this link : Housing (pay attention to orientation, side with internal support layer should be…
Simple filament runout sensor from generic optical endstop Print with supports BOM: Optical endstop switch Two M3 threaded inserts Two M3 screws with washers Two parts of PTFE-tube Fusion 360 file included. Category: 3D Printer Accessories
Remix this encoder to meet the parts I had lying around, also made some personal adjustments. Updated to include Mount for 2020 extrusion on my Voron. Parts 1 x Optical Sensor: https://www.amazon.ca/gp/product/B072R4FRDH 2 x MR115-2RS…
This rotating mount (MK1) for transmissive optical elements, was designed during my master thesis project: "Development of Next-Generation Optical Tweezers" and used in multiple motorized optical attenuator setups. It has since been…
Soporte y activador para instalar un sensor óptico al eje Z en una Ender 3, muy sencillo de colocar y ajustar. Print instructions Category: 3D Printer Accessories Summary Soporte y activador para instalar un sensor óptico al eje Z en una…
Wanted a very minimalistic enclosure for the optical drive removed from my old laptop. For standard sized slimline SATA Optical Drives and slimline SATA to USB converter. Two screws in side to secure optical drive, but can be used without…
I made a complex tile that when assembled, will create a cool optical illusion that will blow your mind! This is great for desks, tables and even coasters. Download the file and put it in your slicer. There are no supports required and it…
This is for using an internal 5.25" optical drive with an external SATA->USB adapter. Under desk mount. The optical drive(s) can be mounted under the desk out of the way and then the drives attached with a usb adapter for sata. There is a…
Make your own custom size optical breadboard! These are 125 mm metric optical breadboard tiles, which can be interlocked on the bottom side using connectors. This was specifically designed to hold M6 DIN934 stainless steel nuts of 5 mm…
This optical illusion small parts tray is designed using anamorphosis. Anamorphosis is a technique in which an item or drawing is purposefully distorted so that the intended effect is only visible at a very specific angle. When viewed at…
I couldn't fit the connector from the original version made for the Prusa MK3S+ on the X-Axis of my Prusa MK4 so I modified the original model to fit in the gap between the X-Axis pulley and the motor holder. For the one I printed and end…
This is a optical connector holder to screw on an optical bench. Really useful for optical cable management in a lab. It works with the ADAFC3 from Thorlabs. Print Settings Printer Brand: Prusa Printer: i3 MK3 **Rafts:** Doesn't Matter…
A simple enclosure to encase an internal 5.25" Optical Drive, to be used externally with an adapter. Specifically, this was for the Pioneer BDR-209DBK with this adapter https://www.amazon.co.uk/dp/B07JGT17B8 (which is a very simple…
------------------------------------------------------------------------ List of released EOS rotor designs (subject to be actualized frequently) EOS_01 rotor design →…
A simple box inspired by the Jastrow illusion ( https://en.wikipedia.org/wiki/Jastrow_illusion ). What better way to experience an optical illusion than by having a tangible object to manipulate? I printed the lids without the first and…
This is an improved case for the optical read/write head for energy meters (smart meters) developed by the "Volkszähler" project in Germany. In addition to the printed parts you'll need: a ring shaped neodymium magnet, outer diameter…
The UC2 "You See Too" project ( https://github.com/openUC2/UC2-GIT ) offers a versatile, modular framework for developing interactive optical projects as open source hardware (publication: https://doi.org/10.1038/s41467-020-19447-9 ).…
TOSLink is an old optical connection used for sending digital audio between consumer equipment. This data is typically sent over HDMI with the video nowadays. This is a dust cover that fits unused sockets on the equipment.
Rubin's vase is a famous figure-ground illusion developed around 1915 by the Danish psychologist Edgar Rubin. Perfect for flowers, pens, or anything else that'll fit! Join me in creating magic and supporting my 3D printing and design…
video, how it works Z home action using this optical end stop. https://www.youtube.com/shorts/sI1ZvfzMKzE In Voron2.4 3D printer, it's using a metal M5 pin for Z endstop, it uses the pin to let the nozzle to touch and get a Z=0 position.…
In FPV (First Person View) drone flying, the application of positioning technology has become increasingly important. Positioning technology not only reduces the likelihood of losing the drone but also provides a stable flying experience…
------------------------------------------------------------------------ List of released EOS rotor designs (subject to be actualized frequently) EOS_01 rotor design (…
Knob designed to fit on a cheap Chinese optical encoder with my remote Elecraft K3 Knob project. Fits a 1/4" diameter shaft. Category: Electronics
This is a sizing blank
