Counting matching models…
UPDATE: Version 3 included with better tuned dimensions and fixes based on feedback. UPDATED UPDATE: Thanks to Crosslink for featuring this in his video!! The extruder on the SV06 can get quite hot, due to the weak stock fan, especially…
Update 2025-6-25: Added fusion 360 archive file so other can edit or adjust file as they want. Please do not judge me to harshly, I did not label all of my sketches. A slim profile wall mount for a Lenovo M11 tablet so it can be used as a…
A protective case for Lenovo legion go tablet; All the protective cases available so far did not support controller separation, so I made my own. it also has slot for perpendicular USB-C adapter on top USB-C slot and kickstand. print with…
Note that this model has been superseded by this new test square. I find it easier, as well as being faster, covering a wider range of nozzle offsets, and having a finer resolution. This is a test print to help fine tune a printer…
Hi guys, My name is Lau, a content creator, design engineer, and passionate with 3d printing. Welcome to check out my youtube channel: I made 3d printer reviews videos, tutorial, mod, and more.…
Remove all the mess at your desk by moving the dock of the surface. This model allow you to hang your dock on the back of your desk, and it is easy to move. It is recommended to print the model in PETG, and to make it strong i recommedn 4…
This design is for PCs that are in a cabinet out of sight. It uses four #8 Lath Screws with the exact ones being Everbilt SKU 540509. All you have to do is mirror (X-axis) the main piece in the slicer for the other half. Then print two of…
Tested different V-slot covers available on this site, as you can see on the makes on my profile, this was the best fitting cover, has a very good press fit but is still easily removable. Available you'll find a file containing every…
Test bed level for Sovol SV01. Adjust in real time by acting on the wheels. G-code created with Prusaslicer 2.2 Print Settings Printer: Sovol SV01 Rafts: No Supports: No Resolution: 0.20 Infill: 100% Filament: Eryone PLA rainbow Category:…
Update 11/3/23: Added a slot for a Logitech wireless mouse/keyboard USB dongle: “X1C Cable Reel with USB.3mf” Original: Cable management spool for a Lenovo 65W charger that came with a Think Pad X1 Carbon Gen10. I would bet that Lenovo…
Couldnt find any bracket or frame to wallmount my Lenovo P11 Tablet for Smart Home Dashboard purposes. There is a small notch for the camera module and light sensor, as well as 4 mounting point sitting flush with the modell on the back.…
The original magnetic probe holder for Sovol SV07 and SV07+ printers does not allow the height of the probe to be changed. I've therefore designed a replacement part that allows this height to be adjusted, so that longer hotend assemblies…
Bigger storage container for Novo Nordisk flex touch pen 1mg + (V2)
On my first version I created a remix of this model but then quickly realised after making a few iterations of it that it would actually just be better to keep it simple and more like the stock one supplied by Sovol SV06 Plus . So I've…
The official Sovol SV06 strain relief is a great foundation for anyone looking to customize their cable management system, and while it may not fit all individual needs, it's a great starting point for modifications. It's worth noting…
Simple stand for the Lenovo Thunderbolt 3 Gen2 dock (Modelnumber 40AN) You will need to remove the rubber feet from the part of the dock that goes into the stand. It's a pretty tight fit, so depending on your printers accuracy you might…
Replacement foot (high) for Lenovo SK-8825. May fit other models.
Páka na povolení šroubovacího víčka na PET lahvi RAJEC. Protože má uzávěr na lahvi RAJEC hrozně jemné zoubky, zhotovil jsem model dělený, aby se mohlo víčko ještě více sevřít a neklouzalo při povolování. V modelu jsou zhotoveny dvě dutiny…
A small loop to replace the Filament holder on the SOVOL SV06 to guide the filament path when using an external fillament holder this is much smaller than the original filament spool holder and can be useful if you need to fit the printer…
Support for syringe to NovoRapid Penfill vial
Führung für obere Glasplatte des Sovol SV08 Enclousers. Mit diesen Keilen kann die obere Glasplatte des Enclousers, wie eine Schublade vor und zurück bewegt werden. Mich hat das Einkeilen der Türen immer ziemlich genervt. Guide for the…
This Screen protector for the Sovol SV06 Plus is designed to sit with in the depression with out actually touching the screen. The design is otherwise identical to my previous modal. Printed in Silver, Black, Blue, & Red PLA The gCode…
My Sovol came with almost the same exact tool kit as the Ender this holder was designed for. It also came with tweezers, a spatula, two nozzle cleanout wires of differing diameter, an additional open end wrench, and a 90 deg 6mm wrench. I…
Headphone holder for a Jabra headset for my Lenovo L580 laptop. The holder is attached to the right-hand corner of the laptop. Printed with a Prusa Mini+. Support should be activated.
Sovol SV06 Magnetic Screen Cover utilizing 6x2mm or 6x3mm magnets. I had not realized that the Sovol SV06 Screen was on a ferrous metal plate. For some reason because it did not look like sheet metal, I thought it was something else. Then…
Upgrade your 3D world with this sleek, architectural Solar Carport! Whether you are building a smart city diorama , an EV charging station model , or a sustainable farm layout , this design delivers professional realism without the…
Domovoy - Wikipedia
Pour les imprimantes SV01 Pro Upgrade avec le heatbreak fullmetal https://www.amazon.fr/gp/product/B0BJTWZ5C5/ref=ox_sc_act_title_1?smid=ASUA3ZY196WTJ&psc=1 Follow me on Instagram / Facebook / Beacons Discover My Best 3D Models Axe Magnet…
Klika pro nové dveře - hranol 8mm, použití v novostavbě pri vyberu designu dverniho kovani.... Proti zabouchnuti dveri v koupelne nebo WC. Door handle for new houses. Toilet, bathroom….
The holder is suitable for mounting a Lenovo T16 and a 16" monitor that can be folded back and forth on a shelf/window sill or table. The holder can be mounted on up to 21.5mm thick boards, tables or window sills (use the step file for…
I recommend printing the top upside down, with support on the build plate only (at least). You can probably put supports everywhere, but it may be harder to clean up afterwards For the bottom part, you can print it upright, with either…
Stand for the Lenovo Yoga Pro9 16IMH9 Laptop. Print in 1 part (PETG or heigher temp. material). Usefull when using photogrammetry or other high demanding applications. The stand increases the clearance under the intake of the CPU and GPU…
Lenovo 530s stands Was designed to this particular model but can fit in other model of laptops (I've tested in a Dell Latitud 7700 and in Asus X510). The Gap between the hook and the circle is 12mm Hight is 45 mm. This was printed:…
The original stand for the AUTO-VOX 7,2" rear view screen doesn't fit in my car as it's supposed to be taped to the dashboard, so it would end up behind the middle screen or other inconvinient location. I remixed the nicely fitting…
This is a very basic one peace "print, mount and forget" solution for most lenovo 45W power supplies tested with lenovo M260 45W second generation thinkpad 45W tiny m910/920 45W may fit some 60Ws too It will not win any award ;-) but it…
I wanted a mounted trash bin for my SV01 Pro, so I figured going the Gridfinity route for mounting would make it useful for a much wider user-base. You can find the original OnShape document here if you want to copy and do any…
I wanted a way to clear some of the clutter from my desk, so I designed and printed a mount to hang my Minifuse 2 from the bottom of my Lenovo Thinkvision 27" screen.
If you've removed your disk drive from your old lenovo thinkcenter desktop to install an HDD, here's a cover to protect it from external dust. Also works on lenovo m91p desktop. I'm not a professional, so please be kind with me, let me…
Print as oriented and clip into place. Note that the version in the photos is very slightly misaligned, but that issue has been corrected in the finalized model (but it works well enough for me so I didn't bother reprinting). Original…
Otvírák určený pro 5l kanystry, navržený pro snadné a bezpečné povolení i velmi pevně utažených uzávěrů. Usnadňuje manipulaci a šetří sílu při otevírání. Opener designed for 5 L canisters, intended for easy and safe loosening of even very…
The Lenovo Graphics Dock is great for providing a little more graphics power when needed, but it takes up quite a bit of space on the desk. With this wall mount, you can mount it on the back or the underside of the desk. This allows you…
Glare Shield for Novostella RGB Flood Lights.
Printed mine in bulk PETG and draft mode, no need for fancy layers or support. It is possible to mount the drives with M3 screws, but I dont thinkt that is needed. Uploaded a few variants if you dont want to use openscad to change the…
I made this to hold the filament samples on the spool holder for the Sovol sv06 3d printer I hope you enjoy this modal let me know if there is any problems and ill fix then
Soporte de un cargador de Laptop Lenovo de 65W para el escritorio o pared
Jednoduchá krytka pre dodatočne montovanú vodovodnú batériu s “priznanými” rozvodmi vody. Ak sa ti model páči klikni na srdiečko a keď ho vytlačíš ohodnoť hviezdičkami a prilož fotku. Ďakujem. A simple cover for a retrofitted faucet with…
This is a simple test for moving X and Y axes for a Sovol SV06 PLUS (do not use it on a regular SV06 as it has a smaller bed) but it works on every printer with at least 300x300 bed size. I had “something” making noises during printing so…
The on/off switch for the Lenovo Ideacentre (IdeaCentre AIO 3 27IMB05) is in the back behind the display and difficult to operate, because normally you cannot see it. You can switch on the PC with your keyboard, but this is not reliable…
A Gingerbread Cottage on a Chicken Leg? This model is a playful mash-up of two classic fairy-tale motifs: the witch’s cottage that stands on a chicken leg, and the witch’s gingerbread cottage. The first comes from Slavic…
Výtisk je navržen tak, aby splňoval požadavky na mechanickou pevnost a spolehlivě přenášel vnitřní síly vznikající při zatížení. Předpokladem pro jeho výdrž je tisk se 100% výplní.
Template for making heart shapes on top of cakes. Made for spring forms with 22cm diameter. Šablona pro tvoření tvarů srdce na dortech. Určená pro dortové formy s průměrem 22cm.
This cable chain ( SPINE ) supports the extruder ribbon cable on the Sovol SV06 3d printer and stops it from sagging on taller prints. There are three special pieces for the ends of the spine. Refer to the pictures for correct placement,…
I updated my popular 10" rack mount for Lenovo ThinkCentre Tiny. It adds up to two standard keystone jack sockets, so you can bring Ethernet/USB/HDMI (or whatever keystone you like) to the front of your rack. I made some additional…
This is version 2 of my original SV06/SV06+ heatbed cable support design. This variation is a one-piece cable support and it's super easy to install. No tools are needed, and you do not have to remove any parts. Once mounted, insert the…
Designed for GDSTIME GDB5015 24V. Unobstructed homing. Printable without supports. Light weight. Glueing optional but advised for better and quieter airflow. CFD analysis included. Version improvements: Aditional mounts on extruder…
SVO6 You need 2 x 173.5mm in length each to fill each groove (a ~1mm gap will remain). Scale the length if you need to. SV06 Plus I'm told by user @ThomasAlbrecht that to cover both extrusions fully, you need 4 x 223mm. SV06 Plus ACE I'm…
If you own a Sovol SV06 3D printer, you know how important it is to keep the bed cables secure and protected. That's where the SV06 strain relief comes in - with its straight and lifted versions, it helps to prevent the cable from rubbing…
PrusaSlicer profiles made specifically for Sovol SV06 Plus (SV06+) 3D printer, to make the most of its size, speed and accuracy. Version 1.10 update: profile for SV06 (non-Plus) also included - based on Prusa MK3. The profiles are based…
Later edit: For the US folks https://mandalaroseworks.com/products/sv08-clear-acrylic-panels if you use code CN3D at checkout you also receive a 5% discount! thanks to Mandala Rose Works you have to chose if you use a top hat or not to…
Printable without supports. Designed for GDSTIME GDB5015 24V. Unobstructed homing. Complete replacement for stock extruder cooling. V2: lighter design. Fixed cracking issue at screw hole. Requiered Hardware: 1x M4*20 1x micro JST plug…
What is this? This is a mount for the BTT Eddy for the stock Sovol SV08 toolhead/shroud. Please note: The BTT Eddy needs to be removed from it's casing to fit. Why another/different mount? I had to remake the design because with me the…
This is a very easy-to-print, easy-to-install SNAP-ON back cover for the SOVOL SV06 3d printer. To install, simply disconnect the ribbon cable from the LCD controller board, snap the cover in place, re-connect the ribbon cable, and you're…
WARNING: Calibrate shrinkage before you print. These are long pieces and errors will show. Hello guys I want to share with you that Funssor is selling our design so who want to buy this Top Hat already Printed with all the Hardware you…
Github now: Sovol SV08 - Optimized G-Code / Macro.cfg / printer.cfg and highspeed settings PETG Further releases and instructions on GITHUB: https://github.com/kampfwuffi/Sovol-SV08-Optimized-Macros HOW HARD IS IT TO IMPLEMENT? Basically…
Update! -- November 29, 2023 I have recreated my remixed frame strain relief support model from rogerquin's original model using OpenSCAD ! By default, the recreated frame support is the same as before. However, the OpenSCAD model…
27 June 2025 Here are the latest updates! Xenomorph OG The LED's are moved to the front and the air duct are bigger and also they have Vortex generators. this is adding 10% more airflow resulting in better part cooling. 2 May 2025…
Adapter for lenovo legion go connect
Keep an eye on your Sovol SV06 extruder movements with this extruder visualizer/motor knob that adds a touch of style and personalization to your printer. With the extruder movements on the SV06 and SV06 Plus often difficult to see, this…
Helps you to put on your bed correctly
I have designed this for the lenovo M93P tiny but may fit other devices also. To print it either print it flat as on model or place it on the front
You can Import my SOVOL SV07 Profile to print fast and with the external fan. The only part I copied from Makersmuse was the start of the external fan. When you create a profile for PETG you should remove the external fan cooling and…
Wanted to make a tool storage rack for the SV06 that match the style of the rest of the printer. Has a spot for all the tools that I received with the printer as well as 5 nozzles. Its one piece that printed on the top face. No supports…
Created a filament guide that better matches the design of the Sovol SV06. I will make a better print when I have the right colored filament.
These TPU feet are designed to decouple the BedSlinger from other 3D printers on the same surface by absorbing vibrational energy, helping to minimize machine wear caused by vibrations. Benefits When you place a single printer on the…
This small upgrade solves the problem of the torque effect on the linear block bearing and the quick shifting of the heatbed when homing the Y-axis. I didn't like the idea of the linear block bearing under the bed being used as a stop for…
Please post your makes 😁 Description Easily mount and unmount things off of your printer. Should work with any printer that uses 2040 V-slot aluminum extrusion. I was told that it won't work well on T-slot extrusions. Instructions…
I've been wanting to set up a Tiny cluster using my M720q model computers for a while, and with that have them use 10G networking. It seems that many people do use 10G network cards in these machines with varying success, the only issue…
I have printed them in Polimaker Galaxy Black ABS and they are perfect! The chain and the clip can be printed without support but the ends will need support. Note: if you have bed adhesion problem when printing the clips you can rotate…
A support for the Sovol SV06 Plus cable which runs from the control board box to the print head. On my unit the metal cable support did not extend down in to the control board box, so the support was not firmly guided upwards away from…
A simple heat bed cable strain relief for the SOVOL SV06 3d printer. The 3D-printed piece fits around the cable and inside the existing cable cover. use a zip-tie to clamp the cable in place. Make sure to put the tie head on top so it…
A stand for the Lenovo Legion 5 laptop that allows you to close the lid
Hello everyone New Version Is here thanks to the community members that helped with the perfect fitment In the Cad you will find all the screws and heat set insert that you will need. for those that don't know how to use a step file i…
If you've ever been in the same room as a Sovol SV06, you'll know that the stock PSU's fan is one of the noisiest parts on the machine. With this simple addition, you can make your printer much more pleasant to be around. It significantly…
This heat bed cable strain relief raises the cable up to a 30° angle coming out from the heat bed and minimizes/eliminates cable contact with the rear frame cover. The most common cause of heat bed cable failure is solder joints breaking…
I have a Lenovo ThinkCentre Tiny M90q PC that I wanted to mount under the bottom shelf of my lab workbench. I looked around for existing mounts and couldn't find anything that met my needs, so I set out to design one. I used four #8 x ¾"…
I am printing ABS on my SV08 since a few months now with absolutely 0 issues (warping etc.). For me, its works fine :) Hope you like it! Please leave a comment and like :) The windows of the doors are 426 (-4/+0) x 166 (-4/+0) x 2 mm. I…
I remixed two designs into this. You will need: 4) M3x8 screws 2) M3x12 screws 1) M3x25 screw with an M3 nut (an M4x25 should also work) If you have time, check out the video. :)
Low profile, similar to stock backplate More holes ≠ better cooling Fan standoff to prevent the plate from pressing against the fan and blocking airflow Blocks turbulent areas so airflow is better directed Creates a negative air pressure…
This is a modified version of motocoder's jig to suit the Sovol SV06, the length of cut silicon tube has been extended to 12mm from the 9mm of original jig to better match the Sovol SV06. Information about the original mod can be found…
The front plate is pretty hard to get off without breaking it. Be prepared to use Glue, the fit is also pretty hard to get right. Might be worth looking at my other model which is just a vented lid, you need to tin-snip the top out of the…
You can easy print this out of any material. I got an enclosure so i went for PETG. I printed it with the side where the cam is mounted on, on the printplate. You need to replace the two screws! The originals are too short when using this…
My procedure to fix the taco bed on the Sovol SV08... Step 1 Heatsoak your bed to your normal print temp, preform a QGL 2 or 3 times (this will reduce the deviation between the 4 corners), do full bed mesh height map, and save a copy of…
I have added a big version to accommodate for V4 and for Xenomorph with Eddy You need to orient the part in the slicer this is a simple idea not only to keep the belts in place and aligned but you can also stretch them to fit your new…
Update 2022-12-05: Added V2 which is more of a slotted opening tapered to the left and right to account for times when you print something very tall. It gives more flexibility for the filament when the print head is farther away from…
Due to the Heatplate in my DUAL Filament Dryer from Sovol 3D, I made a StandOff for the DryBox. The StandOff has a 20 mm height, to make sure that the Dryer has enough clearance for ventilation. Share your make, that makes me more happy…
This is an original design made by Voron we just adapt it to the top hat that we made for the Sovol SV08 https://www.printables.com/model/865851-sovol-sv08-top-hat You need carbon fiber foam filter 5 pieces of 7mm x 65mm x 130mm You can…
No support, better fan duct for Sovol SV06 PLUS On photos you can see difference between standard and upgraded fan duct. Also check my Sovol SV06 PLUS Cable HOLDER https://www.printables.com/model/482250-sovol-sv06-plus-cable-holder If…
This is a fully printed dragchain-system for the SV08. It is pretty useful when you build an enclosure for you printer to avoid cables at the buildplate. The Drag chain fixed joint and the Under the drag chain fixed joint are the original…
I really liked Smelliot's version of the 10inch rack mount for Lenovo Tiny PCs, but the m900q's rubber feet are in a different position, so I remixed it and moved the feet channels to fit the m920q/m720q, and perhaps any other tiny's that…
