Liczymy pasujące modele…
This cable chain ( SPINE ) supports the extruder ribbon cable on the Sovol SV06 3d printer and stops it from sagging on taller prints. There are three special pieces for the ends of the spine. Refer to the pictures for correct placement,…
I updated my popular 10" rack mount for Lenovo ThinkCentre Tiny. It adds up to two standard keystone jack sockets, so you can bring Ethernet/USB/HDMI (or whatever keystone you like) to the front of your rack. I made some additional…
This is version 2 of my original SV06/SV06+ heatbed cable support design. This variation is a one-piece cable support and it's super easy to install. No tools are needed, and you do not have to remove any parts. Once mounted, insert the…
Designed for GDSTIME GDB5015 24V. Unobstructed homing. Printable without supports. Light weight. Glueing optional but advised for better and quieter airflow. CFD analysis included. Version improvements: Aditional mounts on extruder…
SVO6 You need 2 x 173.5mm in length each to fill each groove (a ~1mm gap will remain). Scale the length if you need to. SV06 Plus I'm told by user @ThomasAlbrecht that to cover both extrusions fully, you need 4 x 223mm. SV06 Plus ACE I'm…
If you own a Sovol SV06 3D printer, you know how important it is to keep the bed cables secure and protected. That's where the SV06 strain relief comes in - with its straight and lifted versions, it helps to prevent the cable from rubbing…
PrusaSlicer profiles made specifically for Sovol SV06 Plus (SV06+) 3D printer, to make the most of its size, speed and accuracy. Version 1.10 update: profile for SV06 (non-Plus) also included - based on Prusa MK3. The profiles are based…
Later edit: For the US folks https://mandalaroseworks.com/products/sv08-clear-acrylic-panels if you use code CN3D at checkout you also receive a 5% discount! thanks to Mandala Rose Works you have to chose if you use a top hat or not to…
Printable without supports. Designed for GDSTIME GDB5015 24V. Unobstructed homing. Complete replacement for stock extruder cooling. V2: lighter design. Fixed cracking issue at screw hole. Requiered Hardware: 1x M4*20 1x micro JST plug…
What is this? This is a mount for the BTT Eddy for the stock Sovol SV08 toolhead/shroud. Please note: The BTT Eddy needs to be removed from it's casing to fit. Why another/different mount? I had to remake the design because with me the…
This is a very easy-to-print, easy-to-install SNAP-ON back cover for the SOVOL SV06 3d printer. To install, simply disconnect the ribbon cable from the LCD controller board, snap the cover in place, re-connect the ribbon cable, and you're…
WARNING: Calibrate shrinkage before you print. These are long pieces and errors will show. Hello guys I want to share with you that Funssor is selling our design so who want to buy this Top Hat already Printed with all the Hardware you…
Github now: Sovol SV08 - Optimized G-Code / Macro.cfg / printer.cfg and highspeed settings PETG Further releases and instructions on GITHUB: https://github.com/kampfwuffi/Sovol-SV08-Optimized-Macros HOW HARD IS IT TO IMPLEMENT? Basically…
Update! -- November 29, 2023 I have recreated my remixed frame strain relief support model from rogerquin's original model using OpenSCAD ! By default, the recreated frame support is the same as before. However, the OpenSCAD model…
27 June 2025 Here are the latest updates! Xenomorph OG The LED's are moved to the front and the air duct are bigger and also they have Vortex generators. this is adding 10% more airflow resulting in better part cooling. 2 May 2025…
Adapter for lenovo legion go connect
UPDATE: Version 3 included with better tuned dimensions and fixes based on feedback. UPDATED UPDATE: Thanks to Crosslink for featuring this in his video!! The extruder on the SV06 can get quite hot, due to the weak stock fan, especially…
Keep an eye on your Sovol SV06 extruder movements with this extruder visualizer/motor knob that adds a touch of style and personalization to your printer. With the extruder movements on the SV06 and SV06 Plus often difficult to see, this…
Helps you to put on your bed correctly
I have designed this for the lenovo M93P tiny but may fit other devices also. To print it either print it flat as on model or place it on the front
You can Import my SOVOL SV07 Profile to print fast and with the external fan. The only part I copied from Makersmuse was the start of the external fan. When you create a profile for PETG you should remove the external fan cooling and…
Wanted to make a tool storage rack for the SV06 that match the style of the rest of the printer. Has a spot for all the tools that I received with the printer as well as 5 nozzles. Its one piece that printed on the top face. No supports…
Created a filament guide that better matches the design of the Sovol SV06. I will make a better print when I have the right colored filament.
These TPU feet are designed to decouple the BedSlinger from other 3D printers on the same surface by absorbing vibrational energy, helping to minimize machine wear caused by vibrations. Benefits When you place a single printer on the…
This small upgrade solves the problem of the torque effect on the linear block bearing and the quick shifting of the heatbed when homing the Y-axis. I didn't like the idea of the linear block bearing under the bed being used as a stop for…
Update 2025-6-25: Added fusion 360 archive file so other can edit or adjust file as they want. Please do not judge me to harshly, I did not label all of my sketches. A slim profile wall mount for a Lenovo M11 tablet so it can be used as a…
Please post your makes 😁 Description Easily mount and unmount things off of your printer. Should work with any printer that uses 2040 V-slot aluminum extrusion. I was told that it won't work well on T-slot extrusions. Instructions…
I've been wanting to set up a Tiny cluster using my M720q model computers for a while, and with that have them use 10G networking. It seems that many people do use 10G network cards in these machines with varying success, the only issue…
I have printed them in Polimaker Galaxy Black ABS and they are perfect! The chain and the clip can be printed without support but the ends will need support. Note: if you have bed adhesion problem when printing the clips you can rotate…
A support for the Sovol SV06 Plus cable which runs from the control board box to the print head. On my unit the metal cable support did not extend down in to the control board box, so the support was not firmly guided upwards away from…
A simple heat bed cable strain relief for the SOVOL SV06 3d printer. The 3D-printed piece fits around the cable and inside the existing cable cover. use a zip-tie to clamp the cable in place. Make sure to put the tie head on top so it…
A stand for the Lenovo Legion 5 laptop that allows you to close the lid
Hello everyone New Version Is here thanks to the community members that helped with the perfect fitment In the Cad you will find all the screws and heat set insert that you will need. for those that don't know how to use a step file i…
If you've ever been in the same room as a Sovol SV06, you'll know that the stock PSU's fan is one of the noisiest parts on the machine. With this simple addition, you can make your printer much more pleasant to be around. It significantly…
This heat bed cable strain relief raises the cable up to a 30° angle coming out from the heat bed and minimizes/eliminates cable contact with the rear frame cover. The most common cause of heat bed cable failure is solder joints breaking…
I have a Lenovo ThinkCentre Tiny M90q PC that I wanted to mount under the bottom shelf of my lab workbench. I looked around for existing mounts and couldn't find anything that met my needs, so I set out to design one. I used four #8 x ¾"…
I am printing ABS on my SV08 since a few months now with absolutely 0 issues (warping etc.). For me, its works fine :) Hope you like it! Please leave a comment and like :) The windows of the doors are 426 (-4/+0) x 166 (-4/+0) x 2 mm. I…
I remixed two designs into this. You will need: 4) M3x8 screws 2) M3x12 screws 1) M3x25 screw with an M3 nut (an M4x25 should also work) If you have time, check out the video. :)
Low profile, similar to stock backplate More holes ≠ better cooling Fan standoff to prevent the plate from pressing against the fan and blocking airflow Blocks turbulent areas so airflow is better directed Creates a negative air pressure…
This is a modified version of motocoder's jig to suit the Sovol SV06, the length of cut silicon tube has been extended to 12mm from the 9mm of original jig to better match the Sovol SV06. Information about the original mod can be found…
The front plate is pretty hard to get off without breaking it. Be prepared to use Glue, the fit is also pretty hard to get right. Might be worth looking at my other model which is just a vented lid, you need to tin-snip the top out of the…
You can easy print this out of any material. I got an enclosure so i went for PETG. I printed it with the side where the cam is mounted on, on the printplate. You need to replace the two screws! The originals are too short when using this…
My procedure to fix the taco bed on the Sovol SV08... Step 1 Heatsoak your bed to your normal print temp, preform a QGL 2 or 3 times (this will reduce the deviation between the 4 corners), do full bed mesh height map, and save a copy of…
I have added a big version to accommodate for V4 and for Xenomorph with Eddy You need to orient the part in the slicer this is a simple idea not only to keep the belts in place and aligned but you can also stretch them to fit your new…
Update 2022-12-05: Added V2 which is more of a slotted opening tapered to the left and right to account for times when you print something very tall. It gives more flexibility for the filament when the print head is farther away from…
A protective case for Lenovo legion go tablet; All the protective cases available so far did not support controller separation, so I made my own. it also has slot for perpendicular USB-C adapter on top USB-C slot and kickstand. print with…
Due to the Heatplate in my DUAL Filament Dryer from Sovol 3D, I made a StandOff for the DryBox. The StandOff has a 20 mm height, to make sure that the Dryer has enough clearance for ventilation. Share your make, that makes me more happy…
This is an original design made by Voron we just adapt it to the top hat that we made for the Sovol SV08 https://www.printables.com/model/865851-sovol-sv08-top-hat You need carbon fiber foam filter 5 pieces of 7mm x 65mm x 130mm You can…
No support, better fan duct for Sovol SV06 PLUS On photos you can see difference between standard and upgraded fan duct. Also check my Sovol SV06 PLUS Cable HOLDER https://www.printables.com/model/482250-sovol-sv06-plus-cable-holder If…
This is a fully printed dragchain-system for the SV08. It is pretty useful when you build an enclosure for you printer to avoid cables at the buildplate. The Drag chain fixed joint and the Under the drag chain fixed joint are the original…
I really liked Smelliot's version of the 10inch rack mount for Lenovo Tiny PCs, but the m900q's rubber feet are in a different position, so I remixed it and moved the feet channels to fit the m920q/m720q, and perhaps any other tiny's that…
Description : Sovol dryer is perfect but the underside gets very hot. This holder protect the support and help to dissipate heat. re-use original pads hold in place without glue Version : V1 (deprecated): - Perfect for my dryer V2 : - Add…
A simple spool holder for the SV06. I designed this spool holder specifically for the SV06 3D printer, but it might work on others. This spool holder mounts over the existing spool holder. To install, temporarily remove the tube from the…
These feet slide onto the back of the Lenovo Legion 5 Pro laptop for a fairly secure fit. You can pick up the laptop and the feet will stay attached. They do not interfere with the monitor hinge, so you can open / close the lid with the…
This is a Remix of this So it now fits a 19" I needed 2 of this mount for a 19" side by side …. i have adapted the mounts from @Mauker, so you can also just print one side and use some of @Mauker Modular Rack Mount for the other side as…
This is a very easy-to-print, very easy-to-install filament guide for the SOVOL SV06. No tools are required for installation. To install, temporarily remove the spool holder tube and slide the filament guide over the spool holder arm.…
Thank you all, who downloaded this design. I want to also tell you that unfortunately you will need to print the cover again. The small print. I found an issue thanks to all of you who have told me Later Edit : April 30, 2024 Added the…
If anyone would like to support me and my work, please feel free to donate/tip me on Ko-Fi: https://ko-fi.com/nexgen3d Update: Added Step file for the project. Introducing the NXG3D LeGo CyberDeck: Personally, I think Lenovo should have…
The best places I’ve found to mount a Pi on the Sovol SV06 and SV06 Plus require drilling and tapping so I came up with this “backpack” concept to clip onto the controller housing. It lightly plays into PLA’s compliance to hold firm and…
One of the mods we are most proud of! this feet they are not just aesthetics they have multiple purpose obviously a fabulous look risers for better ventilation of the electronic part they have the role of protecting the large pulleys from…
I am sending a pre-configured sovol sv08 profiles file materials such as PLA, PLA-SILK, ABS, ASA, PETG you can mosify and experience improvements have fun profiles are in a zip file I added pla wood in the test version, set the speed as…
…Please be sure to hit like & post a make, I'd love to see your prints! Print on its flat EDGE as this will provide the strength you need in this orientation, that's important! Don't print too fast or you could pull it off the bed, use a…
Testing finished, released! Read Design/Testing section below if you're interested in the details. Checked in with Sovol and they confirmed this will also work with the SV05. I find 30-55% fan works well with PETG depending on nozzle temp…
I have a few Lenovo Thinkcentre Tiny pc's. One came with the stand. I replicated the oem's design so I can have more stands for my other pc's. Print Settings Printer Brand: Creality Printer: Ender 3 Pro Rafts: No Supports: No Resolution:…
This is a stand for the Lenovo ThinkCentre M9xxq Tiny series for upright use. It eliminates wobbling and gives it a firm and save stand. It might be useful for the other series (e.g. M7xxq and M8xxq) as well. It's designed for a device…
This is just a simple texture and model combination for your Sovol SV06 presets in SuperSlicer or Prusaslicer. All I did was adjust the z position of the stl for the bed and quickly made a texture in Affinity Designer for the texture. It…
This is a slim version for having cable chain on the Sovol SV08 All the part are pre oriented in the best position. Only the cover needs little support, the rest they don't need support and only for the clips if you don't have good…
UPDATE Added v2 (RECOMMENDED) Changelog Easier to tighten. Accommodates: Standard ADXL345. BTT ADXL345/S2DW (see this make ). 3 versions of the mount (see filenames for explanations). The bed spacer now plugs into the mount. BOM 4 x M3 x…
Print with 3 perimeters, 20% infill, use snug supports to the bolt holes. Use M4 bolts and nuts to attach everything together. This works perfectly with the SV08 Filament runout sensor holder from dmika7200 . EDIT: I completely…
Built for my Lenovo Flex 5 14". One of the keys' scissor mechanism broke. I got the measurements off it and modeled this. You can either print everything in place, or split the two bodies and print separately although it is tricky to mesh…
edit 02.11.2024: added version with screw holes on the top. For under-desk mounting. edit 24.01.2024: Slots for the rubber feet set further towards the center. Curves instead of corners on the narrow bridges. This wall bracket is mounted…
Printed with Ender 3 V2: Faceplate/Strut/Bowtie/Pins: Overture Starry Blue PETG No Supports Brim 25% Gyroid Infill 4 Walls - Outside to Inside - Alternate extra wall 0.2 Layer Height Sled Parts: Overture Black PLA Pro No Supports No Bed…
Easy manage your cables on your printer with these simple extrusion cable clips.
Simple stylish protective case for the Legion Go with integrated audio redirectors. Recommend printing from PETG or PETG-CF, I did mine in PC-CF, avoid stiff plastic like ABS and ASA. Supports are needed at the bottom for the USB-C access…
The Nautilus design remixed to fit Sovol SV06 Plus taller hot end. This will work with stock or volcano nozzles. The model is quite rough and ready, not as refined as the original, but works absolutely fine and printer first try. when I…
Edit: If you have some weird-***-shaped computer like @Emplar_201570 , this model might not fit. Apparently it's my responsibility to check that. Prints without supports! I printed it in ABS, but I guess PLA is fine as well (as long as…
…Please be sure to hit like & post a make, I'd love to see your prints! MACROS AVAILABLE HERE…! https://github.com/3DPrintDemon/Demon_Klipper_Essentials_Unified/ EDIT: ADDED SILICONE MOUDLE for use with silicone pads, including the one…
Remix of the cable relief if you have your printer next to a wall 0.2 layer or 0.15 i used PETG for better heat resistance Supports on plate only Remix of Cable Strain Relief for SOVOL SV06 3d printer da rogerquin
***IMPORTANT*** Some users have experienced difficulties snapping the fan in place. Please measure the fan duct to confirm your printing results have the recommended measurements before installing the fan. If your measurements are not…
Adjusts angle of the built-in camera so it points down more (centered a bit below the nozzle). I recommend using Arachne wall generator to handle the very thin loop. Category: 3D Printer Parts
Improved dimensions. See Sergiienko Valentyns original for more details. If you use Polymaker PolyMide CoPA like me: Printing it all in one piece with supports is an option, but the supports are a struggle to remove as is default with…
Replaces the top cover of a Lenovo Mx20Q/X and provides fan opening for 120 or 140mm fans. It's not a total like for like, so you'll need to bond the front panel to the case as the supplied screw won't be enough to hold the panel on with…
Sharing my custom 3D enclosure design for the Lenovo M90q Gen 1, featuring the MSI RTX 3050 LP, a 3.5-inch LCD screen, and an RGB fan. This project involved designing the 3D case model using SketchUp and printing it with PETG filament on…
Sovol SV06 Plus is a great printer, but its bed heating cables are not fixed resulting a safety issue. With this solution first 20mm will be fixed. Don't forget to print it from ABS or other hi-temp material. Installation requires 10…
Note that this model has been superseded by this new test square. I find it easier, as well as being faster, covering a wider range of nozzle offsets, and having a finer resolution. This is a test print to help fine tune a printer…
I printed this in ABS with 4 walls and 40% gyroid infill Required: 4 x M3 x H4 Heat Inserts, 4 x M3 x 20 Bolts
Designed for GDSTIME GDB5015 24V. Unobstructed homing. Printable without supports. Light weight. Glueing optional but advised for better and quieter airflow. CFD analysis included. Version improvements: Aditional mounts on extruder…
Simple bowden tube mount for M6 bowden coupler. Requiered Hardware: 2x M3*8 countersunk 1x M6 bowden coupler
Fixing overheating issues when installing a GPU with a ventilation side panel on the Lenovo M910s, M920s, M720s, and M71 This project introduces a meticulously designed ventilation side panel built specifically for Lenovo M910s, M920s,…
New versions available: Single Fan: https://www.printables.com/model/542760-the-nautilus-sovol-sv06-fan-duct-5015-blower-fan-v Dual Fan: https://www.printables.com/model/543502-the-amonite-sovol-sv06-fan-duct-dual-5015-blower-f Designed…
Print settings: 0.2mm layer height 4+ bottom layers and 5+ top layers 6 perimeters w/ 0.6mm nozzle or 9 perimeters w/ 0.4mm nozzle 10+% infill I used PETG. PLA may work fine, but I was concerned about creep. I have also not tested the…
This is a desiccant case for the SH02. It can be used with silica gel larger than 1.5mm in diameter. NOTE: Please print it in 0.15mm layer height without supports. Added 1.0mm gap models too(January 20th , 2025)
Sovol SV08 first layer test 350x350mm using the complete print bed and a single 0.2mm layer. With that you can really see if your 1st layer is OK. =) IMPORTANT NOTE: You will need to remove the silicon brush (blue arrow) in the upper…
This is a remix of the excellent cable chain for the Sovol SV06 made by rogerquin ( https://www.printables.com/model/447467-cable-chain-spine-for-sovol-sv06-3d-printer-extrud ). To make the chain flex smoothly, I used blender to scale…
Adapter for Hotend Bambulab. Print in ABS, ASA, ASA-CF, PC-CF, not in PLA or PETG. 3 possible choices. -The original Bambulal version with fixed nozzle. You must print the BBL-O version. -The AliExpress clone, with the tiny nozzles…
Made from scratch, just few additions to the original to make it easier to print with ASA, ABS… and with bearing of course. Added clearence for the rod hole to prevent pushing down your motor mount when tightened 2 models : Standard With…
Enhance your Lenovo M90q with this custom-designed 3D case tailored for the RTX A2000. This 3D model file is designed to optimize airflow, maintain compact size, and enhance the overall aesthetics of your setup. The model ensures…
A cable chain to keep the heat bed cable from dragging along the base of he printer. Should help with the thermistor going haywire. Notes: ORIGINAL version. Thick. Does not fit with a back mounted parts cooling fan! The shroud “parks” on…
The model allows you to quickly and easily pack the M720q mini computer into an enclosure to install it on a 10u rack.
This is a direct replacement for the stock front cover of the Sovol Zero and Sovol SV08 Max toolheads. Besides improving part cooling performance, it also adds support for a dedicated toolboard fan (2510 size). We tested the part cooling…
