P
PrintablesSINGH DESIGN
Cable organizer OXO
Cable organizer updated version with locking system that allows for more effective organization Assembly instructions, insert ring into slots.
- Downloads
- 6,311
- Likes
- 1,188
- Rating
- 4.77
Search results: oxo
Counting matching models…
P
PrintablesDL2MAN
VHF UHF Moxon Antennas
This is a set of files to build a 2m and 70cm moxon antenna. Inspired by David (DL1DN), known on youtube as “QRP lifestyle”, but his design was not available for DIYers. So I decided to design it from scratch and pusblish it for others.…
- Downloads
- 1,615
- Likes
- 135
- Rating
- 4.7
P
PrintablesWaRi
Homunculus loxodontus (detailed hands)
This is a Homunculus loxodontus remix. https://www.thingiverse.com/thing:2103775 I changed the hands to add detail and a better pose. I also made it water tight without clipping and separate the eyes.. the eyes are super tiny. If you…
- Downloads
- 941
- Likes
- 88
- Rating
- 5
P
Printablesunhild
Moxon antenna 868MHz Meshtastic
Remix for use with Meshtastic Requires SMA crimp connector, a piece of heat shrink tubing, and RG174 cable or similar diameter. Glue the connector with the crimped cable into the antenna using 5-minute epoxy or another glue .
- Downloads
- 815
- Likes
- 93
- Rating
- 5
P
PrintablesTimElectric
Loxone-Nano-2-Relay-with-Wago
Loxone Nano 2 Relay Tree mount for DIN Rails with Holders for Wago 221
- Downloads
- 622
- Likes
- 34
- Rating
- 5
P
PrintablesAnthony Walley
Yagi / Moxon antenna parts 2m/70cm
I designed the mounting parts for this field-assembly antenna to be strong yet easily taken apart for transport. The “boom” is 20mm pvc electrical conduit, and the elements are 6mm solid aluminium rod. The mountings consist of a threaded…
- Downloads
- 469
- Likes
- 56
- Rating
- 0
P
Printablesseasick
Loxone NFC Code Touch compatible cover
This cover was inspired by Davejje 's model . The measurements for the default values were measured and ultimately copied from that model. Those values are compatible with the “Loxone NFC Code Touch”, 2nd generation. The OpenSCAD script…
- Downloads
- 445
- Likes
- 26
- Rating
- 5
P
PrintablesTimElectric
Loxone Nano 2 Relay Tree Rail Mount
Loxone Nano 2 Relay Tree mount for DIN Rails
- Downloads
- 419
- Likes
- 8
- Rating
- 5
P
PrintablesTimElectric
Loxone Nano DI Tree Rail Mount
Loxone Nano Di Tree mount for DIN Rails
- Downloads
- 366
- Likes
- 13
- Rating
- 5
P
PrintablesKayra Gündoğar ÇETİN
TC3EC 433MHz Moxon Antenna
TC3EC 433MHz Moxon Antenna by TA3NT For detailed information, you can read our related blog post(TR). This antenna was designed by TA3NT under the name "TC3EC Moxon Antenna" to meet the antenna needs of 433MHz LoRa Meshtastic Nodes in…
- Downloads
- 365
- Likes
- 39
- Rating
- 4.75
P
PrintablesGreg B
Moxon 868MHz directional antenna
Model designed in Autodesk Fusion. Antenna created with Moxgen software. Dan Maguire AC6LA https://www.ac6la.com/moxgen1.html Design under Autodesk Fusion360. Mount for navigation holder. Mount for Ikea Tisken suction cup.
- Downloads
- 339
- Likes
- 35
- Rating
- 0
P
Printablesqczek
Moxon Antenna Frame (LRS 433MHz)
Update: New tuned version available, find out more http://qczek.beyondrc.com/lrs-moxon-antenna-v2-tuned/ Just a frame for DIY Moxon atenna. Find out more on my blog http://qczek.beyondrc.com/moxon-antenna-for-lrs-tx/ Just uploaded…
- Downloads
- 334
- Likes
- 47
- Rating
- 0
P
PrintablesPrinter McGee
Loxone Valve Actuator Cable Tie
Version(s) V1.0 - 15Nov24 - Initial Design V2.0 - 06Jan24 - Added bottom bracket ---- Description After a few years, I noticed some heads were popping off the holders, so this little top/bottom bracket is to be used with x2 cable ties to…
- Downloads
- 328
- Likes
- 16
- Rating
- 4.5
P
PrintablesTerminalSump
10m Lightweight Moxon
3D parts to build a 10m Moxon. The antenna is a 3d printed design, using mast, guys, antenna wire and tent poles. Its designed to be lightweight and “quick” to deploy. the current configuration is: Sotabeams Tactical 7000HDS with ring and…
- Downloads
- 320
- Likes
- 32
- Rating
- 0
P
Printablesincof
Moxon antenna
2m Moxon antenna center and boom insulator parts Boom dimensions: 20x20 mm (15x15 mm insulator V2) Diameter of Al tubes: 8 mm Print instructions PETG
- Downloads
- 319
- Likes
- 59
- Rating
- 0
P
PrintablesKaren Chau Designs
Heart-Shaped Chocolate Candies | Plain, drizzle, "love", "xoxo"
I sculpted these heart-shaped chocolates! Print them all or your favorite style(s)! 4 styles: plain “xoxo” “love” drizzle Updates 2026-02-05: Modified 4 of the original models (cut the bottoms) and added them to a new "v2" folder. Also…
- Downloads
- 281
- Likes
- 50
- Rating
- 5
P
PrintablesVVlasy
Loxone Touch Mountplate
This is a like for like replacement mounting bracket for Loxone Touch Air, Loxone Touch Tree and Loxone Touch for Nano. No special print settings are needed, a simple print Print instructions Unassociated tags: loxone touch, nano io…
- Downloads
- 280
- Likes
- 18
- Rating
- 5
P
PrintablesConstantine
Yet another 868MHz Moxon antenna
Another Moxon antenna. I don't trust other designs and decided to design this antenna to my own specifications. This antenna was designed for PETg plastic, so the dimensions differ from those given by the calculator for a frequency of 868…
- Downloads
- 278
- Likes
- 40
- Rating
- 5
P
Printablesitalic
Oxo Rapid Brewer Basket Adapter
To use the ORB for soup with smaller doses of coffee but maintain a deep bed, one can use an espresso basket in place of the stock Oxo basket. This adapter will fit a typical 49-52mm espresso basket with round flange, such as those by…
- Downloads
- 273
- Likes
- 15
- Rating
- 0
P
Printablesfbe4974df721
NARCAN (naloxone) Nasal Spray holder
Easily prints in PETG or PLA. Using 0.3mm layer height as there's no need for detail. Version 1.2 is called “thin brow”, as it has less overhang at the very top. This makes the holding a little bit looser.
- Downloads
- 271
- Likes
- 24
- Rating
- 3
P
PrintablesAdam Kimmerly
10 m (28 MHz) Moxon Antenna
BACKGROUND: A little bit of gain can make a big difference in an HF radio antenna, and one of the simplest and smallest gain antennas is the Moxon Beam. Now you can easily build yourself a portable one for the 10 m band with some 3d…
- Downloads
- 264
- Likes
- 77
- Rating
- 5
P
Printablesbdogo6
Roxon Flex companion scale with tool slots
edited model with pocket clip screw hole
- Downloads
- 263
- Likes
- 34
- Rating
- 0
P
PrintablesBBTheStig
Gridfinity Bin for Oxo Kitchen and Herb Scissors
https://www.oxo.com/kitchen-and-herb-scissors-361.html
- Downloads
- 251
- Likes
- 91
- Rating
- 5
P
PrintablesTimElectric
LOXONE Touch Tree to GIRA Adapter
This is a simple adapter for integrating the LOXONE Touch Tree switch into the GIRA Standard 55 switch range. Without the adapter the LOXONE Touch Tree switch is not in one level with the frame element (see pictures). The adapter is…
- Downloads
- 243
- Likes
- 11
- Rating
- 5
P
PrintablesDG1JAN
Handheld Moxon-Yagi 2m/70cm
BOM: 10mm PVC Tube: 4x 33,5cm 2x 12cm 1x 17cm 4mm Aluminum Rods: 1x 29cm 1x 31cm 1x 33cm 3x M3x5x4 press in nuts 3x M3x10 Hex-Screws Wire ~2.5m eg. LiYv 0,25mm² BNC Socket (example:…
- Downloads
- 242
- Likes
- 55
- Rating
- 0
P
PrintablestheM25
Homunculus Loxodontus 3D scan
A scan of the Waiting Awaiter or Zhdun by Margriet van Breevoort.
- Downloads
- 236
- Likes
- 21
- Rating
- 5
P
PrintablesOM0WT
DL2MAN moxon antenna T-part with handle
Printed with PET-G filament.
- Downloads
- 234
- Likes
- 13
- Rating
- 5
P
PrintablesRJ Tan
Roxon Flex Companion Scale Remix
Roxon Flex Companion Scale with slot for victorinox pen, tweezer, tortoise gear ferro rod and pin. As well as needle slot. Pen and pin slot remain original, modified tweezer slot location and added extra ferro rod slot as well as needle…
- Downloads
- 232
- Likes
- 26
- Rating
- 3
P
PrintablesRené
Loxone Double Frame Angle Adapter (30°) for Smart Doorbell
This practical 3D-printed angle adapter lets you mount a Loxone double frame, including the Smart Doorbell, at a 30° tilt. By adding this slight angle, you can optimize the camera’s field of view or the doorbell’s sensors, ensuring better…
- Downloads
- 194
- Likes
- 8
- Rating
- 0
P
PrintablesCasey
2M (144MHz) Pocket Moxon Ham Radio
Video of build instructions Note: I printed in PLA with 50% infill. I tried once printing in PETG 50% infill but the material was too soft when using a strong band and the frame warped. So just a heads up on that, feel free to experiment…
- Downloads
- 194
- Likes
- 24
- Rating
- 4
P
PrintablesBear-Beer (3dMikL)
Antena Moxon 868 MHz
The moxon antenna at 868 MHz is combined with the Heltec V3 (V4) board in one housing for stationary use in the Meshtastic or Meshcore network. There are two installation options: on a stem for indoor or outdoor use, and on a mast using…
- Downloads
- 180
- Likes
- 24
- Rating
- 0
P
PrintablesDavid D
Loxone mountplate for Jung LS 990
Mountplate so you can fit the Loxone touch inside a Jung LS 990 system. Needs the Jung 55mm Zwischenrahmen in addition. See https://www.jung-group.com/de-DE/Zwischenrahmen-55x55-Serie-LS-alpinweiss/LS-961-Z5-WW Thanks to…
- Downloads
- 172
- Likes
- 9
- Rating
- 0
P
PrintablesVVlasy
Loxone Touch Tango Adapter
An adapter to fit loxone products into Tango wall plate. Two parts, the mounting bracket a the cover plate itself Assembly is shown in the last four pictures. Printed bracket has to go above the tango bracket. No special print settings…
- Downloads
- 170
- Likes
- 18
- Rating
- 5
P
PrintablesGimik91
Inokim OX OXO rear fender mudguard replacement
Rear fender if you brake original one. Please follow picture tutorials to print and adjust angle. Print instructions Please follow picture tutorials to print and adjust angle.
- Downloads
- 150
- Likes
- 11
- Rating
- 0
P
Printablesgltovar
OXO Rapid Brewer cup adapter (text free)
When text is on the first player of prints, sometimes small zones on the inside of letter loops will fail to adhere which increases the likelyhood the first layer fails in some way. Simply removed this text to not have to worry.
- Downloads
- 149
- Likes
- 10
- Rating
- 0
P
Printablesmdshw5
OXO Rapid Brewer cup adapter
This adapter lets you brew directly into larger cups, mason jars or travel mugs without having to use the plastic cup that comes with the brewer. Easier, faster brewing with less cleanup! Optional legs can be found here. Available to…
- Downloads
- 147
- Likes
- 7
- Rating
- 0
P
PrintablesTesibius
Homunculus Loxodontus Cookie Cutter
Median wall thickness is 0.6 mm (suitable for 0.3 mm nozzle). When using other nozzles, I recommend scaling proportionally. If the walls do not adhere near the corners, you can increase the flow value and try a better linear/pressure…
- Downloads
- 146
- Likes
- 12
- Rating
- 0
P
PrintablesTimElectric
Loxone MicroSD Extender DIN
Loxone MicroSD Extender in Loxone Style. Remix from Walkingrobot…
- Downloads
- 146
- Likes
- 16
- Rating
- 0
P
PrintablesBBTheStig
Gridfinity Bin for Oxo Swivel Peeler
https://www.target.com/p/oxo-swivel-peeler/-/A-13567836?ref=tgt_adv_xsp&AFID=google&fndsrc=tmnv&DFA=71700000106731582&CP
- Downloads
- 142
- Likes
- 27
- Rating
- 0
P
PrintablesBBTheStig
Gridfinity Bin for Oxo 12" Tongs
https://www.oxo.com/12-tongs-619.html
- Downloads
- 134
- Likes
- 31
- Rating
- 5
P
PrintablesIgorOs
OXO Rapid Brewer cup adapter (low-profile)
I tired the https://www.printables.com/model/1392189-oxo-rapid-brewer-cup-adapter and didn't like how the coffee sometimes dripped onto the printed part, also it was too big for some of my cups. I measured the AeroPress cup adaptor and…
- Downloads
- 128
- Likes
- 7
- Rating
- 5
P
PrintablesDries Housen
Loxone Touch Surface box (simple)
A simple box for the loxone Touch switch
- Downloads
- 126
- Likes
- 3
- Rating
- 0
P
PrintablesSuperMatt
prop nasal spray for naloxone use education
Put together this prop for use in education of people for proper naloxone use Category: Other
- Downloads
- 118
- Likes
- 11
- Rating
- 0
P
PrintablesBBTheStig
Gridfinity Bin for Oxo Tongs with Nylon Head
https://www.oxo.com/oxo-gg-9-22-5cm-locking-tongs-w-nylon-head.html?gclid=CjwKCAiAjrarBhAWEiwA2qWdCBkAKjVveNhWKr5IB8E0I1
- Downloads
- 118
- Likes
- 19
- Rating
- 0
P
Printablesjofeinmechaniker
Moxon DVBT-2 / MOXON UHF
DVBT / DVBT2 Antenne. Nur für Private Anwendungen ! Erstellt nach Recherchen im Netz: MOXON UHF / 690 Mhz / Kanal 48 kann bis zu 5dB bringen. Angaben ohne Gewähr. Ich habe Kupfer-Lack-Draht (1,5mm Durchmesser) entsprechend vor gebogen und…
- Downloads
- 116
- Likes
- 7
- Rating
- 0
P
PrintablesSilenTree 12th
XboxOne Controller stand Borderlands
A little remix with the Borderlands logo Print Settings Printer Brand: Prusa Printer: i3 MK3 Rafts: No Supports: No Resolution: 0.2mm Infill: 5% Filament: Plasty Mladeč PLA White and Black Category: Video Games
- Downloads
- 116
- Likes
- 27
- Rating
- 0
P
PrintablesDoubleYou7
Loxone Intercom Weather Case Pro
Loxone Intercom Weather Case
- Downloads
- 115
- Likes
- 7
- Rating
- 5
P
PrintablesZach
Electrical box for double and triple Loxone Mounting Bracket
Double and triple Loxone Mounting Brackets (https://shop.loxone.com/enen/mounting-bracket-double-silver.html, https://shop.loxone.com/enen/triple-mounting-bracket-silver.html) have non-standard box spacing of 98 mm. Installing three…
- Downloads
- 113
- Likes
- 22
- Rating
- 0
P
PrintablesOM0WT
DL2MAN 2m moxon antenna 8mm pole adapter
Printed with PET-G filament.
- Downloads
- 111
- Likes
- 9
- Rating
- 0
P
PrintablesRiverRaid
Loxone Remote Air Wallmount
Wallmount for the Loxone Remote Air Print Settings Printer Brand: Prusa Printer: I3 MK3S Rafts: Doesn't Matter Supports: No Resolution: 0.2 Infill: 20% Filament: Prusament PETG Galaxy Black Category: Organization
- Downloads
- 110
- Likes
- 5
- Rating
- 0
P
PrintablesRobertHirschbeck
Adapter Plate 30° for Loxone Intercom
I have created an adapter plate for a Loxone Intercom and Touch Code with an angle of 30 degrees. The holes for mounting the plate at the wall are horizontally. You will need 6 threaded inserts with a M3 thread (Ruthex). These holes are…
- Downloads
- 108
- Likes
- 3
- Rating
- 0
P
Printablesmih
Loxone Air Contact Waterproof Box
This is box for outdoor mount of Loxone Contact Air. It consits of three parts - box, cap and gasket. Box and cap is printed from PETG, gasket from Flex.
- Downloads
- 103
- Likes
- 9
- Rating
- 0
P
PrintablesDG1JAN
Handhold VHF Moxon based on DL2MAN
The Feedpoint Part is modified to be not so pointy (because pointy is scary ;-). Also I reduced the drill size of the inner holes, so you can use a cable tie (or knot) for strain relief. The optional cap can be used to close/protect the…
- Downloads
- 102
- Likes
- 15
- Rating
- 0
P
Printablesvladatoca
XOXO game
Description: This games is ment to be easily transportable anywhere (for example pub, train, etc.), becouse it can be be packaged together. Content of package: 1x game board, 3x X (pieces) and 3x O (pieces) RULES: 1.step - choose who will…
- Downloads
- 98
- Likes
- 19
- Rating
- 5
P
Printablessidereuschungus
Rebar/Roxor Knob/Cap by katysramkova
Reupload of my preferred rebar cap. Original description, not mine: Ever almost got spiked to a steel reinforcement bar during a house construction? People here use plastic bottles to cover it to prevent injury. I use the same bars at my…
- Downloads
- 94
- Likes
- 13
- Rating
- 5
P
PrintablesJulio Cesar
ROXON FLEX COMPAGNON UPGRADE
Impression faite en buse de 0.3 Seulement les boutons ont besoin des supports. Emplacements pour la pince et le stylo Bientôt, je ferai une version sans les emplacements pour la pince et le stylo. Je le fais en PLA et PETG. J'ai rajoute…
- Downloads
- 94
- Likes
- 12
- Rating
- 0
P
PrintablesGarry Forsunka
Roxon Flex Companion scale with pen, tweezers and pin slot.
Be attention! This is not my design, but I publish it with the author's permission. You can change it to suit your needs as you wish, as the author's vision may differ from yours. This scale is for the side with a clip because it is…
- Downloads
- 93
- Likes
- 18
- Rating
- 0
P
PrintablesRik M0RKM
70cm Moxon Based on DL2MAN's 2M Moxon
I absolutely adore my 2M Moxon that DL2MAN designed and I really wanted to try the 70cm design but my printer would not print his 70cm model as the build plate was just a tad too small. Therefore I decided to built a scaled down version.…
- Downloads
- 90
- Likes
- 6
- Rating
- 0
P
PrintablesBBTheStig
Gridfinity Bin for Oxo Softworks Corkscrew
https://www.target.com/p/oxo-softworks-corkscrew/-/A-13567840?ref=tgt_adv_xsp&AFID=google&fndsrc=tmnv&DFA=71700000106731
- Downloads
- 90
- Likes
- 13
- Rating
- 0
P
PrintablesChris Brokaw
Roxon Flex Companion extra bit holder / holster
This is a holder / holster to carry 4 extra 1/4" bits for a Roxon Flex Companion. It is held in place by the bit in the built-in bit holder, and slides off easily when you pivot the bit holder out to use it. It also fits back into the…
- Downloads
- 89
- Likes
- 15
- Rating
- 0
P
Printablesmentalflossed
Oxo Sink Caddy Base with Drain
Replaces solid OXO Sink Caddy base with one that can drain into the sink. Unprinted/untested, print at your own risk!
- Downloads
- 89
- Likes
- 16
- Rating
- 5
P
Printablesmikrom
Inokim OXO GX16 Charging port mount
The original mount was broken, and despite being extremely similar to the known D-Housing/D-Standard/D-Shape, it's not 31 but 32 mm long. So designed from scratch, the original doesn't even have the hole preventing the connector from…
- Downloads
- 88
- Likes
- 9
- Rating
- 0
P
PrintablesHans Sep
OXO squeeze bottle cap
A good friend of hours gifted us a set of OXO squeeze bottles . Upon opening our gift, we found one of the caps had disappeared during shipping. Amazon sorted this out but we found we could only get the entire bottle, not just the cap.…
- Downloads
- 87
- Likes
- 12
- Rating
- 5
P
PrintablesTThor
4mm Bit Holder Implement for Roxon Flex-series multitools (short 2-slot)
a short 2-slot bit holder implement, able to hold three 4mm bits. It is specifically designed for the Mini Flex Companion; it will likely fit in other short slots, tho I've not tested yet. EDIT: Tested, It will fit in the Flex Companion…
- Downloads
- 86
- Likes
- 19
- Rating
- 0
P
Printablesdave8888
OXO Potato Peeler Cover
Protective cover for an OXO Potato Peeler. An OXO peeler has a very sharp blade which is normally protected by a flimsy plastic clip that soon gets lost. I have made a cover that fits over the end of the peeler to fully protect the blade…
- Downloads
- 86
- Likes
- 7
- Rating
- 5
P
Printablesbclucki
Loxone Zählerinterface IR Air Adapter eBZ DD3
Adapter zur Anbringung des Loxone Zählerinterface IR Air an eZB Zahler DD3
- Downloads
- 85
- Likes
- 3
- Rating
- 0
P
PrintablesTOMY BEAUCHY
Homunculus loxodontus piggy bank
Homunculus Loxodontus isn't a character from Star Wars as it seems at first glance, but a sculpture made by the Dutch artist Margriet van Breevoort. The tiny replica of this statue has been sitting on my desk for a while and I decided…
- Downloads
- 84
- Likes
- 12
- Rating
- 5
P
PrintablesAngus Findlay
Tubes for Moxon Antenna
Print four of the 337.5mm tubes, and two of the 107.5mm tubes. I printed mine in PETG, and it worked beautifully, with a nice bit of flex. I was able to print all the tubes in two plates on my Bambu P1S, and any printer of comparable size…
- Downloads
- 82
- Likes
- 16
- Rating
- 0
P
PrintablesMZ7
Moxon Antenna Frame (868MHz)
Moxon Antenna Frame (868MHz) For copper wire with a diameter of 1.6 mm.
- Downloads
- 82
- Likes
- 15
- Rating
- 0
P
PrintablesEstrangedBaron (ESB3D)
OXO Rapid Brewer (ORB) Modular Tamp
UPDATE 01.23.2026 - I've added an additional tamp base that allows the original tamp to slot into the bottom. This way only the original tamp touches your coffee grounds instead of the 3D print itself. This new base fits the same inside…
- Downloads
- 82
- Likes
- 4
- Rating
- 5
P
PrintablesWelt der Geduldspiele
Paradoxopiped Puzzle
Puzzle description: The Paradoxopiped Puzzle is a melting block puzzle designed by Gianni A. Sarcone, see https://www.archimedes-lab.org/workshopparadoxopiped.html . It is presented here with kind permission of the designer. The box is…
- Downloads
- 82
- Likes
- 10
- Rating
- 0
P
Printablescrisap94
OXO Brew Conical Burr Lid
This 3D model is a replica of the OXO Brew Conical Burr Lid. I designed it to match the original in both dimensions and fit. I also made sure to include the same curvature as the original lid, so it looks and feels just right when in…
- Downloads
- 80
- Likes
- 10
- Rating
- 5
P
PrintablesStele
2.4 GHz Moxon antenna
I´ve created this 2.4 GHz Moxon antenna to enlarge the Range of my Wi-Fi-repeater. The cutouts are exactly the right size for use with 0.2mm² wire. Category: R/C Vehicles
- Downloads
- 79
- Likes
- 12
- Rating
- 0
P
PrintablesRenba
Moxon antenna 868 Mhz (ISM band)
Powerful antenna validated :) Design under Solidworks Created with Moxgen a software from AC6LA I will upload pictures later. other software used to compute Moxon Antenna : 4NEC2 EZWdemo (EZNEC) Happy printing Renba ON5DB Category:…
- Downloads
- 79
- Likes
- 10
- Rating
- 0
P
Printablesgrunscga
OXO Rapid Brewer 58mm Basket Direct Brew
If you like using the OXO Rapid Brewer but are trying to minimize plastic intake, this remix is for youi! The original 58mm adaptor file allowed the use of stainless steel brew baskets, which is the most important, but you were still left…
- Downloads
- 78
- Likes
- 1
- Rating
- 0
P
PrintablesDries Housen
Loxone presence sensor
During the installation of the presence sensors I noticed that there where some hickups. This solved the mounting. The concrete vaults had soms damages from drilling, this created a smooth surface.
- Downloads
- 75
- Likes
- 8
- Rating
- 0
P
PrintablesTThor
Six 4mm Bit Holder, for Roxon Flex Companion
Designed for the Roxon Flex Companion. It can use 3mm-diameter magnets, tho tolerances are tight enough that you might be able to get away without magnets. These N50 magnets are what I used. If you are printing the 6-bit version, I highly…
- Downloads
- 71
- Likes
- 13
- Rating
- 0
P
PrintablesHolger Weihe
Roxon Flex Tool Storage
Storage for currently unused tools. Features 20 Slots. Takes less space than the provided boxes and makes it easier to keep an overview. Chose the settings so that the round bar is printed massive. PLA Pro worked for me, but for longterm…
- Downloads
- 71
- Likes
- 14
- Rating
- 5
P
PrintablesBlaine Francis
Naloxone/Narcan Holder with Molle
Needed a Narcan holder for my vest so I designed this. Works very well at holding the Narcan in place. Works with PLA since it is a place and forget thing but would recommend PETG or equivalent strength.
- Downloads
- 71
- Likes
- 5
- Rating
- 0
P
Printablesskelly
OXO Sink Caddy Base with Drain Spout
A replacement bottom base for the OXO Sink Caddy that includes a drain spout. Printing probably requires supports because of the overhang for the spout hole.
- Downloads
- 69
- Likes
- 7
- Rating
- 5
P
Printablesmaddindj42
Distance Piece for Loxone on Gira Standard 55
Distance Piece for height adjustement for Gira Standard 55 frames and Loxone componentents. Tested wit Loxone Nano IO Air and Touch for Nano. Also Tested with Loxone Touch Air For mounting is also the mountingframe Type1 needed:…
- Downloads
- 69
- Likes
- 2
- Rating
- 5
P
PrintablesSmaythersCorp
Gridfinity OXO Measuring Cup Organizer
Made some Gridfinity OXO measuring cup holders for our drawer. We cook a lot and I am tired of them being all over the place. From the AI Design Concept The Gridfinity OXO Measuring Cup Organizer is designed to fit seamlessly into kitchen…
- Downloads
- 68
- Likes
- 6
- Rating
- 0
P
PrintablesAndrás Sümegi
Portable Moxon antenna for weather radiosonde hunting
The detailed description can be found here: https://motleyscience.com/2025/11/22/portable-moxon-antenna-for-weather-radiosonde-hunting/
- Downloads
- 68
- Likes
- 7
- Rating
- 0
P
PrintablesBoutsman
Loxone touch tree DIN adapter
This is a DIN rail adapter for the Loxone touch tree @ Erasmushogeschool Brussel
- Downloads
- 68
- Likes
- 4
- Rating
- 0
P
Printablestimcel
XOXO Hugs and Kisses 2
XOXO 2 Hugs and Kisses is a member of my growing Valentine Collection. 3 sizes are available in singles or pairs. Models in three sizes included. Resolution: .20 Infill: 15-20% Filament brand: Inland, Atomic Filament, CC3d Filament color:…
- Downloads
- 68
- Likes
- 15
- Rating
- 5
P
PrintablesJEO
Woodworking Moxon Bench Vise.
This vise clamps to the edge of a bench to be used and removable for storage out of your way. Wooden Jaws: The size of the vise jaws is your discretion. For the vise jaws I used 2x3 studs glued together. After trimming they were about 5"…
- Downloads
- 68
- Likes
- 30
- Rating
- 0
P
PrintablesAlex_cf_Siu
Key Blank or holder Implements for Roxon Flex Series
Have always been in search for a key bar thingy that the keys can stay in lock position without swinging out randomly due to loss of pressure from the screws. can't pull the trigger to get the Keyport Slide, not just because of the…
- Downloads
- 65
- Likes
- 13
- Rating
- 0
P
PrintablesSnobound
Shield/cover for OXO vegetable peeler
OXO makes a fantastic peeler. It is very sharp - dangerously sharp even. The only thing I dislike is the flimsy blade shield they include with it. I designed a blade shield/cover that protects the blade and more importantly my fingers…
- Downloads
- 65
- Likes
- 8
- Rating
- 0
P
PrintablesOaklandishh
OXO Rapid Brewer Upgraded Tamper (SOUP)
upgraded tamper for the OXO rapid brewer that prevents tamping at an angle
- Downloads
- 65
- Likes
- 4
- Rating
- 0
P
PrintablesSANAIR
LOXONE Nano Dimmer Air Model
3D Model for the Nano Dimmer Air. Usefull incase someone wants to make enclosures or mounts for this one. Could not get a model from the supplier, so had to design one. @Loxone: pls inform me incase of any IP infringement. I will remove…
- Downloads
- 64
- Likes
- 3
- Rating
- 0
P
Printablesadamnant
Loxodon, Elephantfolk Warlock 25mm (DND / TTRPG)
Here are two variants of a Loxodon Warlock - the trident version could be a Paladin too fairly easily. The AI output a funky version with what it thought was a spear (idk what it was doing) - it seems like a weird elephant trunk / magical…
- Downloads
- 63
- Likes
- 16
- Rating
- 0
P
Printablesraf
Simple lid for oxo pop container
Replacement lid - no pop mechanism. Prints on standard settings no suports etc. The embossed version has a 0.2mm deep patern on top so 0.2mm layer height recommended.
- Downloads
- 63
- Likes
- 9
- Rating
- 0
P
PrintablesDeifox
Roxon Companion OEM-like scales (.step included)
These are a direct replacement for the newer companion scales. Tested on my neon green companion. These new scales have the slots for the tweezers and the toothpick via Roxon, so that's also implemented here. You can print these as is, or…
- Downloads
- 61
- Likes
- 5
- Rating
- 0
P
PrintablesJouni Lindqvist
Moxon Vise assembly kit
This is a simple old skool Moxon vise kit for metric M16 threaded rods and nuts. I printed the parts with the following Cura settings on my Ender 3: Layer height: 0.2 Shell: Wall line count: 4 (important!, these parts need to be sturdy)…
- Downloads
- 59
- Likes
- 28
- Rating
- 0
P
PrintablesKayra Gündoğar ÇETİN
Split TC3EC 433MHz Moxon Antenna By TA3TRV
TC3EC 433MHz Moxon Antenna Splitted By TA3TRV For 220x220mm Printer Beds Print Settings Printer Brand: Creality Printer: Ender-3 S1 Pro **Rafts:** Doesn't Matter Supports: No **Resolution:** .16 Infill: %20 **Filament:** Porima ASA Beyaz…
- Downloads
- 58
- Likes
- 16
- Rating
- 5
P
Printablese.k
Loxone Präsenzmelder Aufputzmontage
Befestigung der Halterung mit d4,5mm (Pan Head ) Schrauben. Fixierung von Loxone Drehverschluss mit Dosenschrauben d3,2x15mm. Kabeleinführung bis d=8mm
- Downloads
- 58
- Likes
- 3
- Rating
- 0