Counting matching models…
[Update] ---2023/11/13--- New version released on here!! Flexi Humpback Whale - New Type(print-in-place) by 3D_Flexseeds | Download free STL model | Printables.com New model was created and the mouth was made to open and close. This is a…
[update] ---2023/12/01--- Added a head model with a support to fix the mouth part. If you are having trouble 3D printing because the mouth part comes off, please use this option. ---2023/12/15--- The body connections have been modified to…
An Articulated humpback whale! 3d printed this on a stream! stream link: https://youtube.com/live/FKH2qFK0mic?feature=s
Die drei Teile drucken und anschließend ineinanderclipsen. Dabei auf die richtige Ausrichtung (entsprechend der Fotos) achten. Bei Verwendung der 3.mf-Datei hat der Halter zusammengeklapppt Visitenkarten-Größe. Handy kann waagerecht oder…
I love snapbback caps and the ones I possess have a nice visor so I wanted to see them on my wall. So here is a simple snapback wall mount that allow you to see the visor of your favorite caps while keeping a low profile. First just screw…
Made this model from scrath with caliper measurements after I found a look alike model that didn't fit my snapback (the holes and pins were too small) PLA model with ironing to make the finish a little smoother. May require some cleanup…
Summary Designed these myself after not really seeing any designs I liked and that were inexpensive/free. Taken inspiration from u/CryptographerOk5058 's Stealth hoods: https://www.thingiverse.com/thing:6537694 . As well as taking heavy…
If you run steam locomotives on your G-scale layout, it is "mandatory" to place this piece of scenery at strategic places. (i.e. at the end of the platforms, and in the workshop area). This is a model of the hinged version, typical for…
EN: This is a folding toy pillory handcuff that can be locked with a padlock, a carabiner or simply a screw and nut. At the request of the youngsters, the wrist holes only have a diameter of 48 mm. For ‘adult use’, you can simply scale…
Want to access even more models not found here ? Interested in supporting my efforts making free models for the world to enjoy? Check out my patreon page here: https://www.patreon.com/mz4250 or support me on Printables Clubs! Patrons have…
These dummy shifters are modeled after the shimano grx shifters. They are basically fake hoods and thus the only benefit is to give you the same comfort as regular dropbar shifters. Main purpose is the fixie and indoor trainer bikes with…
This design allow to create and keep a loop for the fiber and avoid damaging or breaking it just put double-sided to fix it in the network cabinet. Supports are required for hooks.
As the name suggests, this is a fully 3D printed snapback hat made out of PLA and TPU FLEX filaments. Standard snapback hat dimensions were used in the design and with a stretchable tensioner at the back, it should fit on every maker's…
Printable pickup cover for a Fender "Soapbar" pickup, essentially a P90 pickup like Gibson would make. Modeled from scratch however I used the linked adapter as a sanity check that everything should be in the right place. Depending on…
DEUTSCH: Ausklappbares Temperaturregler W1209 Gehäuse. Mit diesem Schanier kann das Gehäuse ein und ausgeklappt werden. Vielleicht können es auch noch andere Leute es gebrauchen. Dieses Thermorelais steuert das Ein- und Ausschalten Ihres…
I switched my ender to klipper because a raspberry pi is just too expensive and the sonic pad is a "rather" closed system (at the time of my upgrade, it could change), I selected the solution of MKS. Since the layout of the raspbarry 3 is…
Check out my Patreon or my Printables club for more awesome models and benefits! Meet the Articulated Humpback whale! It is super cute, very easy to print, and doesn't require any support material or post processing. The multicolor…
A remix to allow the fitting of an Amass XT60 panel mount socket. The blue crimps were found to fit snugly without the need for hot gluing and are held in place firmly by the cover. The wire used is 14AWG
With a study base it stands up anywhere. Surprisingly easy to print! Tree Supports on build plate only Partially Powered by image-to-3D from MakerWorld ( https://makerworld.com/makerlab/imageTo3d )
Since my baseball cap collection was getting bigger and unattractively stacked on the shelf, I was looking for a holder for the caps. Since I didn't like the holders I could find - only a hook on which the cap then starts sagging or the…
Français (English Below)_******************** ____ ******************** J'ai toujours trouvé le Guide Filament de la ender3 un peu trop Basique et simpliste, Je vous propose donc ici une solution plus intelligente et fiable. Le filament…
Overview This snapback extender is designed to add extra length to standard plastic snapback closures. It allows hats that are just slightly too tight to fit comfortably without permanently modifying the original strap. The extender clips…
Um eine elektrische Luftpumpe im Kellerraum aufladen zu können, musste ein Regal in der Nähe der Steckdose her. Da diese Ablage meist keine Funktion hat, sollte sie möglichst wenig Platz einnehmen. Die Konstruktion kann deshalb flach an…
Well, what if you have already printed out all the cool upgrades and tools that are available here? Yes exactly, the Prusament Bag Opener is what is still missing in your collection !!! Of course you can also just open the plastic bag on…
In addition to the printed parts, 2 cylinder head screws M3x20 and 2 magnets Ø6x3mm are required. Assembly: Mark the two magnets at the point of contact with each other. Put the mounting device on the edge of one half, insert a magnet…
For all the situations where you have a full packed Poopbag, but no garbage can around you to throw it away. Simply hang your Poopbags in with the knot and you are again free to use your two free hands to cuddle you pet. Version 2 is…
For those with large heads (me). Originally designed for the Moist Critikal Snapback, may not work with all.
This is a model I made with the idea of making a whale breaching. I went with a bracelet holder and ring tray, since prints gotta be practical or it's rough to get it out there. Prints well in most materials, no supports needed! The file…
Da TGB bei der Blade für vorne keinen Nummernschildhalter vorgesehen hat und ein Mittig angebrachtes Nummernschild die Winde verdeckt, habe ich diesen klappbaren Halter gebastelt. Als Verstärkung für das Nummernschild habe ich auf den…
J'ai développé personnellement mes propres guides fils pour chacun des extrudeurs de ma D12 car je n'utilise pas les supports d'origines que je trouve trop petits et pas assez fiables (résistance au déroulement). Ces guides fils…
Nozzle: 0,4 Layer: 0,2 Infill: 15 to 25% should be sufficient No supports needed, if you print it on the side.
During the summer period, humpback whales do live in the sold polar waters - so it could be assumed, that the water in the cooling system is also cold ;-) I would recommend printing the base in a (dark) blue color, the whale in grey. If…
Hier ist ein einfach zu druckender und einfach zu montierender Smartphone-Halter. Für den Druck benötigt ihr keine Stützen . Für die Montage benötigt ihr keinen Kleber sondern nur maximal ca. 24cm Filament (am besten PETG) und eine Zange…
Bring the beauty of the ocean into your home with this elegant Humpback Whale Jewelry Dish STL. Looking for a commercial license? Visit my Patreon for reseller options and exclusive monthly releases. COMMERCIAL LİCENSE PATREON :…
This is my design for a modular cell pack using Topband 25Ah LiFePO4 cells. You will need: Various lengths of 6mm threaded bar 6mm ID 10mm OD washers Serrated flange nuts 4x Pieces of metal with drilled holes that conform to the "Link…
Numbers plateholder(italy) for a 50ccm bike
To extend the library of prints you can wear, I remixed this snapback. Recommended to be printed in TPU90A, though can most likely be printed in other flexible filaments or flex grades. Voronoi style to not trap heat, and it looks good.…
Druckeinstellungen PLA Füllung 10% Schichthöhe 0,3mm ohne Stützen, mit Rand
I've seen some wonderful images of whales breaching the surface, and it started really sticking with me. I really wanted to make it something special, and it was in my mind's eye for several weeks. Finally, I created this model, and…
3 cm, 10 cm, 24cm, 4cm keychain
Just a humpback whale coming out of your wall (destined to mate to a possom, but I figured while it lived it might as well look like it'd fit in the aquarium). Printing notes. Wireframe v1 has some minor dangly bits if printed organic…
My collection of my own and donated snapbacks has grown considerably and I didn't like the purchased wall mounts, so I modeled my own. I mainly wanted the print without supports and in a way that wouldn't deform the shape of the snapback…
Just a simple cap hanger to wallmount. Good thing is that it keeps the caps in shape :)
PLA Füllung 20% Schichthöhe 0,3mm Mit Stützen, ohne Rand
I know there are other cap extenders online. But they did not fit. So I made a new design providing the FreeCAD model. With the FreeCAD model you can adapt the model to your specific snapback cap. I did this design for a friend and added…
3 cm, 10 cm, 20cm, 4cm keychain
Do you have to sort once then build up ok 1. Build up large boxes and large sticks together and etc
A simple TPU dog poop bag holder, so that you don't have to carry poop around to the next trash can. It can be placed where ever you desire. Just tie a not on the bag and slip it through ;-) It is great if your dog has the same ability as…
This is to house a 9-way D-type loopback connector for serial port software testing. It has no cable entry holes. You will need 2x small countersunk screws to secure your connector. Print flat side down with no supports. I printed in PLA…
Material: PLA+ Druckereinstellung: Layerhöhe 0,2 mm / Infill 15 % / Support partial Zusätzliches Material / additional material: Schrauben / screws: 2 / M4 x 50 mm 4 / M4 x 15 mm 6 / M4 x 12 mm Gewindeeinsatz / threaded insert 6 / M4 x…
I have a radio on my GPIO header that didn't fit along with the standard fan module, so I designed one that hold the fan in more of an external position. I combined the existing models for the module blank and fan module, so fit should…
My collection of my own and donated snapbacks has grown considerably and I didn't like the purchased wall mounts, so I modeled my own. I mainly wanted to print without supports (in the version with a sunglasses holder, I recommend…
Tired of deformed caps cluttering your shelves or taking up too much room? Meet the Modular Snapback Hanger , a print-in-place, zero-support vertical organizer designed to keep your baseball caps, hangers, and accessories perfectly…
Got a favorite hat that’s just a bit too tight? This extender is a lifesaver for anyone who loves snapbacks but has a larger head size. It was specifically designed to fit Difuzed double-row closures , but it should be compatible with…
Printed a two colored heart by pausing the print midway on the first layer and changing from blue to yellow. This is a tight fit. Rotating the heart 45 degrees in the slicer, so the lines align up.
Abgeschrägte Fläche auf das Druckbett platzieren, keine Supports notwendig.
Clip that holds Beco poopbag dispenser to your flexi dog leash. The clip slides into the flexi dog leash accessory “groove”. Press the poopbag dispenser to the clip, holding it firmly by friction. Printed in PETG on Bambu P1S using 0.4…
Infill 100%, PETG, ASA
Protected magnetic keys have asymmetric key ring holes and are quite long, so I made this foldable key holder especially for them. It holds four magnetic keys and both halves are connected with a M3 screw/nut. Since the keys do not rest…
Mount piece for Iphone mount for bikes with wide top tube, line Canyon Roadlite. Older models dont have ready made mounting poits, so it is fixed with 3M VHB and secured with one ziptie. Additionally you will need 2 pcs 3mm threaded…
I make this for Yakima JustClick T3 / whispbar T3 licence plate holder. Is holder for licence plate for bicycle holder. I brogen this original one. Printed on side for better strenght. Not print in position wich is on photo. Printed with…
Der praktische Maskenständer für unterwegs. Ob im Büro, oder der Kantine, nie wieder die Mund- und Nasenbedeckung zerknüllen und in der Tasche verstecken. Das eklige Gefummel hat ein Ende. Sauber drüber oder dran hängen. Zeigen auch Sie…
3 cm, 10 cm, 24cm, 4cm keychain
Remix - angepasst für eine CFMoto 450S mit Frontbügel
I designed this replacement closure strap for snapback / baseball caps after the original plastic fastener broke. The model consists of two parts that replace the standard adjustable cap closure. Because this part needs flexibility and…
Made a simple hook to attached to the wall, to hang my laptop bag on after work. It is then out of the way and gives me some extra space. Made some improvements M8 screws. The screws now goes completely inside.
Coaster: Humpback whale (three colours) 10 cm, 20 cm
I printed this at 0.1 mm layer height, 100% infill and without support.
Thanks to cunicode for this great design! http://www.thingiverse.com/cunicode/designs I needed a solid stl to print it in "Vase mode" or "Joris Mode", and here it is. Category: Bracelets
I made it because I found the size of the universal PBA a bit disappointing, and I had a quick clip at home, so an idea. Pinrtout stl files. DeWALT_PCB_Holder 2ea DeWALT_holder 4ea DeWALT_PCB_Step_5_130mm or 155mm 2ea (Options) Inserts 12…
a drawer/box for your raspberry pi and to fil the gap in the ender 3 and the pro. When installing slide the box in the right beam of the printer making sure the bord is down and the flat side of the box up. Make sure you download the…
A simple, side-tilting cell phone holder for use in bed or on the couch. With easy switching from left to right. The holder has a bar at the front to give the holder more stability when supporting it in the bed. Lateral tilt: 30° Tilt…
Hark! Weary traveler! Sit a spell and allow me to regale you with the tale of embarkation to luthiering a hurdy gurdy using the quite remarkable bit of engineering dropped by demagnetized and subsequent mods by dablob, and how I've made…
Have whales breach your walls with this mountable whale model! Either use command strips or wall screws (for load bearing use) to enjoy this unique & functional wall art. I found an old whaling harpoon at my local antique shop & had this…
Bei den Löchern, klebt man jeweils einen Ringverstärker auf den Billiard Tisch. Bei den Pfeilen sieht man dann wohin sich die weiße Kugel bei einem Spopball hin bewegt.
Just a substitute for a broken cap for the M.Asam Lipbalm.
A flatish humpback whale bookmark. There are three versions, including a blank one that you can customize! Feel free to remix, and share the joy of reading :)
Easy fit to an IKEA Skaddis just put it in the hole and push it down. It can hold around 6 poopbags and 2-4 leashes on the sides.
Royal Wessex Cap Badge I whipped up using 3d builder and tinkercad. Created by request! Enjoy! Category: 3D Printing
3 cm (two colours), toppers (three colours)
This impressive 3D model features a humpback whale captured in a dynamic leap from the waves. The elegant motion, combined with fine detailing on the whale and the stylized water base, makes this piece a striking highlight for maritime…
A push-button fidget with a real return spring — printed in place, one piece, nothing to assemble. Push the button and a ball on a serpentine spring clicks over eight sharp teeth; let go and a printed spiral coil pushes the whole thing…
https://www.thingiverse.com/thing:4570690 Category: 3D Printer Accessories
Some simple topbars for the Corsair Dominator RAM sticks. I designed them a while ago as a low-profile alternative because the original ones were a bit too tall and collided with the radiator in the top of my PC case. The body is quite…
Made for https://www.youtube.com/@MajorHardware Major Hardware Fan Showdown Inspired by Nature: The Humpback Whale is one of few animals that use bumps on their skin called Tubercles. They are vortex generators for the whale. The…
After purchasing a cap organiser the hooks provided kept sliding down loosing the equal spacing. also hooks were not holding the caps enough unless there was weight at the bottom of the line so i made my own. 25mm webbing can be bought…
"One size fits all” is a term that tends not to include me, especially when it comes to hats. If you're like me, which means that in addition to having an inhumanly large head you're getting tired of trying to find extenders amongst all…
Das ist ein Regal mit 4 Schubladen zum Auseinander ziehen. Es kann für MakeUp verwendet werden. Aber natürlich für alles was man zum Hobby an klein teilen rumliegen hat. An die Skadiswand kann allerlei befestigt werden. Die Löcher der…
Ich hatte so etwas ähnliches im Netz gesehen. Daraus entstand die Idee eine klappbare Variante zu erstellen. Etwas Filament (ca.10 cm) wird extra benötigt zum verbinden der Teile. Vielleicht ist es jemanden von Nutzen.
To properly hang Snapbacks from this, the snap-back has to be slid into the hanger on either thin side and then adjusted to the center so the overlapping parts prevent slipping out (see picture 2 (also excuse my disgusting walls)) The…
lip balm holder (Balea, Jelení lůj, Labello, Astrid, Weleda, Dove, ...) Dimensions height: 7 cm (2.75590551 inches) radius: 2 cm (0.787401575 inches) weight: approx. (4.8 g) (0.169 ounces) Creator: sebrlicek
This is Flatcan. Flatcan is a small Kitchen-Trashcan that utilizes the standard size dogpoop-bags. It is meant for your typical kitchenwaste that you find prepping your family meal, as that is often way too much for any classic 5L…
I added a female connector from the excellent Modular Mounting System to the Humpback Fan Module of the modular Raspberry PI Case so I could mount the touchscreen to the case directly. This part combined with a side mount allowed me to…
I Have Uploaded the STL File as also the 3mf file which i used to print it without issue sure it took about 1,5h but its fast enough for me with a decent quality. Maybe Just lay it flat on the middle part so that you dont need supports…
I bought these Riderace bar plugs that I thought I could use with my road bike. Turns out the metal part that comes with is too narrow. Perhaps it's meant for mountain bike bars and I just didn't realise when buying it. Either way, the…
Customized version of http://www.thingiverse.com/thing:1050735 Created with Customizer! http://www.thingiverse.com/apps/customizer/run?thing_id=1050735 Instructions Using the following options: left_header = 0 left_screw = 0 $fn = 150…
